Commit Graph

413 Commits

Author SHA1 Message Date
Laine Stump
77f72a8615 conf: new "managed" attribute for target dev of <interface type='ethernet'>
Although <interface type='ethernet'> has always been able to use an
existing tap device, this is just a coincidence due to the fact that
the same ioctl is used to create a new tap device or get a handle to
an existing device.

Even then, once we have the handle to the device, we still insist on
doing extra setup to it (setting the MAC address and IFF_UP).  That
*might* be okay if libvirtd is running as a privileged process, but if
libvirtd is running as an unprivileged user, those attempted
modifications to the tap device will fail (yes, even if the tap is set
to be owned by the user running libvirtd). We could avoid this if we
knew that the device already existed, but as stated above, an existing
device and new device are both accessed in the same manner, and
anyway, we need to preserve existing behavior for those who are
already using pre-existing devices with privileged libvirtd (and
allowing/expecting libvirt to configure the pre-existing device).

In order to cleanly support the idea of using a pre-existing and
pre-configured tap device, this patch introduces a new optional
attribute "managed" for the interface <target> element. This
attribute is only valid for <interface type='ethernet'> (since all
other interface types have mandatory config that doesn't apply in the
case where we expect the tap device to be setup before we
get it). The syntax would look something like this:

   <interface type='ethernet'>
      <target dev='mytap0' managed='no'/>
      ...
   </interface>

This patch just adds managed to the grammar and parser for <target>,
but has no functionality behind it.

(NB: when managed='no' (the default when not specified is 'yes'), the
target dev is always a name explicitly provided, so we don't
auto-remove it from the config just because it starts with "vnet"
(VIR_NET_GENERATED_TAP_PREFIX); this makes it possible to use the
same pattern of names that libvirt itself uses when it automatically
creates the tap devices.)

Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-09 14:35:54 -04:00
Shivaprasad G Bhat
4ef4ba4974 tests: Add a baseline test for multifunction pci device use case
There are already good number of test cases with hostdevices,
few have multifunction devices but none having more than one
than one multifunction cards.

This patch adds a case where there are two multifunction cards
and two Virtual functions part of the same XML.

0001:01:00.X & 0005:09:00.X - are Multifunction PCI cards.
0000:06:12.[5|6] - are SRIOV Virtual functions

Future commits will improve on automatically detecting the
multifunction cards and auto-assinging the addresses
appropriately.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-09-09 16:44:24 +02:00
Shivaprasad G Bhat
5a9dc4a50c virpcimock: Mock the SRIOV Virtual functions
The softlink to physfn is the way to know if the device is
VF or not. So, the patch softlinks 'physfn' to the parent function.
The multifunction PCI devices dont have 'physfn' softlinks.

The patch adds few Virtual functions to the mock environment and
changes the existing VFIO test xmls using the VFs to use the newly
added VFs for their use case.

Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-09-09 16:44:24 +02:00
Jonathon Jongsma
9f90a4bfb4 qemu: maintain user alias for video type 'none'
After parsing a video device with a model type of
VIR_DOMAIN_VIDEO_TYPE_NONE, all device info is cleared (see
virDomainDefPostParseVideo()) in order to avoid formatting any
auto-generated values for the XML. Subsequently, however, an alias is
generated for the video device (e.g. 'video0'), which results in an
alias property being formatted in the XML output anyway. This creates
confusion if the user has explicitly provided an alias for the video
device since the alias will change.

To avoid this, don't clear the user-defined alias for video devices of
type "none".

https://bugzilla.redhat.com/show_bug.cgi?id=1720612

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2019-09-06 10:22:47 +02:00
Boris Fiuczynski
0c67a11a4a qemu: support bootindex on vfio-ccw mdev devices
Add support to specify a boot order on vfio-ccw passthrough devices.

Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-08-28 12:26:43 +02:00
Boris Fiuczynski
321c614f72 tests: add vfio-ap mdev tests
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-08-28 12:20:11 +02:00
Ján Tomko
0dd8202d35 qemuxml2xmltest: switch TPM tests to use latest caps
In preparation to moving the validation to the parser,
we need to supply the correct caps.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-08-22 11:27:31 +02:00
Vitaly Kuznetsov
9f3b5f89d4 qemu: add support for Direct Mode for Hyper-V Synthetic timers
QEMU-4.1 supports 'Direct Mode' for Hyper-V synthetic timers
(hv-stimer-direct CPU flag): Windows guests can request that timer
expiration notifications are delivered as normal interrupts (and not
VMBus messages). This is used by Hyper-V on KVM.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-08-19 11:38:28 +02:00
Wim ten Have
63b2e57cb3 tests: add tests for kvm-hint-dedicated feature
Update the KVM feature tests for QEMU's kvm-hint-dedicated
performance hint.

Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-08-12 15:13:36 +02:00
Stefan Berger
32926f1093 tests: Add test for TPM XML encryption parser and formatter
Add a test case for the TPM XML encryption parser and formatter.

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-26 09:59:27 +01:00
Michal Privoznik
7711a7346a qemu: Relax os.loader->type check when validating domain
When validating a domain among all the checks there are two that
concern VIR_DOMAIN_LOADER_TYPE_PFLASH specifically. The first
check ensures that on x86 ACPI is enabled when UEFI is requested,
the second ensures that UEFI is used when ACPI is requested on
aarch64. However, check for UEFI is done by plain comparison of
def->os.loader->type which is insufficient because we have
def->os.firmware too.

NB, this wouldn't be a problem for active domain, because on
startup process def->os.loader->type gets filled by
qemuFirmwareEnableFeatures(), but that's not the case for
inactive domains.

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1729604

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2019-07-15 13:24:09 +02:00
Peter Krempa
7d5b283065 qemu: Supply correct default type for 'dir' based VIR_STORAGE_TYPE_VOLUME
Our code would skip adding the default type in this cases, but since we
know that the only reasonable option here is 'fat' we can add it while
starting the VM.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-06-26 12:28:31 +02:00
Peter Krempa
99917ade0a qemu: domain: Allow 'VIR_STORAGE_TYPE_VOLUME' disks with 'fat' format
The storage volume may in fact convert into a directory when starting
the VM so that it may be actually possible to use it.

This is a regression caused by c9b27af32d as moving the check to
validation time without adjustment causes problems as the volumes are
not translated yet.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-06-26 12:28:31 +02:00
Andrea Bolognani
1e49d1ec79 tests: Enable *-headless and *-graphics in qemuxml2xml
We didn't do this earlier because the DO_TEST_CAPS_ARCH_LATEST()
macro was limited to qemuxml2argv until recently.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-06-26 10:37:54 +02:00
Andrea Bolognani
fb91763d41 conf: Format spapr-vio addresses as 32-bit
Using 8 hex digits all the time, regardless of whether the
actual value can fit in fewer, makes it more obvious to the
user what the limits are.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-06-20 12:50:03 +02:00
Andrea Bolognani
60f4c41377 conf: Parse and format SMMUv3 IOMMU
SMMUv3 is an IOMMU implementation for ARM virt guests.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-06-03 17:40:48 +02:00
Andrea Bolognani
5b0dcbcdef tests: Use DO_TEST_CAPS_*() for Intel IOMMU
We can drop the intel-iommu-machine test case while doing so,
since it is supposed to showcase how we generate different
command lines for older QEMU versions and we can do that
using a single input file now.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-05-22 14:54:32 +02:00
Cole Robinson
c800e29b87 tests: Add several net model passthrough tests
Examples of passing unknown strings through <interface>
<model type=X/>

Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-16 13:11:08 -04:00
Cole Robinson
5f18cd03af tests: qemuxml2xml: Convert aarch64-os-firmware-efi to TEST_CAPS
Demostrate DO_TEST_CAPS_ARCH_LATEST by converting the test case
'aarch64-os-firmware-efi'

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-16 12:44:37 -04:00
Cole Robinson
129da536dc tests: qemuxml2xml: Convert genid* to TEST_CAPS
Convert these test cases to use DO_TEST_CAPS_LATEST

* genid
* genid-auto

This ensures the test infrastructure is working as expected for
a test case with explicit -active and -inactive XML test data

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-16 12:44:36 -04:00
Cole Robinson
ea5f33b73c tests: qemuxml2xml: Convert os-firmware* to TEST_CAPS
Convert these test cases to use DO_TEST_CAPS_LATEST

* os-firmware-bios
* os-firmware-efi
* os-firmware-efi-secboot

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-16 12:44:36 -04:00
Cole Robinson
7339f4d79b tests: qemuxml2xml: Convert virtio-*transitional to TEST_CAPS
Convert these test cases to use DO_TEST_CAPS_LATEST

* virtio-transitional
* virtio-non-transitional

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-16 12:44:36 -04:00
Michal Privoznik
6864d8f740 qemuBuildMemoryBackendProps: Get pagesize early
https://bugzilla.redhat.com/show_bug.cgi?id=1693066

Up until memfd introduction (in 24b74d187c) we did not need to
know @pagesize because qemuGetDomainHupageMemPath() could deal
with it being zero (value of zero means use the default hugetlbfs
mount). But since for memfd we are not passing a path to
hugetlbfs mount rather the page size value we need to know its
value upfront.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-03 16:37:19 +02:00
Michal Privoznik
59a22be864 qemuxml2xmltest: Add memfd tests
Somehow, these were not tested. Use symlinks to point expected
output back to the input. This way we can also fix some
discrepancies in the input XMLs.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-03 16:37:19 +02:00
Peter Krempa
22b83a54f5 conf: Add 'index' attribute for <disk><mirror><source>
Similarly to the disk source we need to keep the disk index (which is in
the qemu driver used for identification of the source for block jobs)
for the <mirror> element so that when it's replaced as a disk source
after pivoting all the allocated data is present.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-03 11:58:09 +02:00
Peter Krempa
4e797f1af9 conf: Parse and format 'backingStore' for disk <mirror>
When the block copy operation is started with a reused external file in
incremental mode libvirt will need to open and insert the backing chain
for that file into qemu (in -blockdev mode). This means that we'll need
to track the backing chain and metadata such as node names for the full
chain of <mirror>.

This patch invokes the full backing chain formatter and parser for
<mirror> so that the chain can be kept with <mirror>.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-03 11:58:09 +02:00
Peter Krempa
da9f3cd84b conf: Format seclabels for <backingStore>
We parse the seclabels and use them internally so omitting them when
formatting would be misleading. Additionally our schema actually allows
them.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-03 11:58:09 +02:00
Michal Privoznik
68ade25372 qemu: Enable firmware autoselection
https://bugzilla.redhat.com/show_bug.cgi?id=1564270

Now that everything is prepared for qemu driver we can enable
parser feature to allow users define such domains.

At the same time, introduce bunch of tests to test the feature.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-12 16:09:55 +01:00
Andrea Bolognani
09a95068fb tests: Add -inactive suffix when appropriate for qemuxml2xml
Some test cases are only executed using WHEN_INACTIVE, and the
output file name should reflect this for clarity.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-03-05 10:41:10 +01:00
Andrea Bolognani
bb5c6e7a96 tests: Use WHEN_BOTH in qemuxml2xml whenever possible
There are a few cases where we are using either WHEN_ACTIVE
or WHEN_INACTIVE even though WHEN_BOTH would work perfectly
fine: for those, start using the simpler DO_TEST() macro.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-03-05 10:41:08 +01:00
Andrea Bolognani
c5bc4437ee tests: Rename some qemuxml2xml output files for clarity
disk-mirror-old has different output file for the active and
inactive parts, which should be named accordingly; on the other
hand, both output files for disk-backing-chains-noindex are
identical, so it makes sense to only keep around one and remove
the (in-)active suffix.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-03-05 10:40:50 +01:00
Cole Robinson
448a094717 qemu: Support scsi controller model=virtio-{non-}transitional
Add <controller type='scsi' model handling for virtio transitional
devices. Ex:

  <controller type='scsi' model='virtio-transitional'/>

* "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional"

The naming here doesn't match the pre-existing model=virtio-scsi.
The prescence of '-scsi' there seems kind of redundant as we have
type='scsi' already, so I decided to follow the pattern of other
patches and use virtio-transitional etc.

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:41 -05:00
Cole Robinson
47f94f4591 qemu: Support virtio-serial controller model=virtio-{non-}transitional
Add controller type='virtio-serial' model handling for virtio
transitional devices. Ex:

  <controller type='virtio-serial' model='virtio-transitional'/>

* "virtio-transitional" maps to qemu "virtio-serial-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-serial-pci-non-transitional"

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:41 -05:00
Cole Robinson
90fd9bd989 qemu: Support input model=virtio-{non-}transitional
Add <input> model handling for virtio transitional devices. Ex:

  <input type='passthrough' bus='virtio' model='virtio-transitional'>
    ...
  </input>

* "virtio-transitional" maps to qemu "virtio-input-host-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-input-host-non-transitional"

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:41 -05:00
Cole Robinson
2593a1bd1a conf: Add <input model='virtio-{non-}transitional'/>
<input> devices lack the model= attribute which is used by
most other device types. To eventually support
virtio-input-host-pci-{non-}traditional in qemu, let's add
a standard model= attribute. This just adds the domain_conf
wiring

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:41 -05:00
Cole Robinson
6e64899284 qemu: Support vsock model=virtio-{non-}transitional
Add <vsock> model handling for virtio transitional devices. Ex:

  <vsock model='virtio-transitional'>
    ...
  </vsock>

* "virtio-transitional" maps to qemu "vhost-vsock-pci-transitional"
* "virtio-non-transitional" maps to qemu "vhost-vsock-pci-non-transitional"

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:41 -05:00
Cole Robinson
0f5958f5c5 qemu: Support memballoon model=virtio-{non-}transitional
Add new <memballoon> model values for virtio transitional devices. Ex:

  <memballoon model='virtio-transitional'/>

* "virtio-transitional" maps to qemu "virtio-balloon-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-balloon-pci-non-transitional"

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:41 -05:00
Cole Robinson
62eef965ba qemu: Support filesystem model=virtio-{non-}transitional
Add <filesystem> model handling for virtio transitional devices. Ex:

  <filesystem type='mount' model='virtio-transitional'>
    ...
  </filesystem

* "virtio-transitional" maps to qemu "virtio-9p-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-9p-pci-non-transitional"

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:41 -05:00
Cole Robinson
947448e212 conf: Add <filesystem model='virtio-{non-}transitional'/>
<filesystem> devices lack the model= attribute which is used by
most other device types. To eventually support
virtio-9p-pci-{non-}traditional in qemu, let's add a standard
model= attribute. The accepted values are:

- virtio
- virtio-transitional
- virtio-non-transitional

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:41 -05:00
Cole Robinson
e063707556 qemu: Support rng model=virtio-{non-}transitional
Add new <rng> model values for virtio transitional devices. Ex:

  <rng model='virtio-transitional'>
    ...
  </rng>

* "virtio-transitional" maps to qemu "virtio-rng-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-rng-pci-non-transitional"

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:41 -05:00
Cole Robinson
37f75d56da qemu: Support hostdev model=virtio-{non-}transitional
Add <hostdev> protocol=vhost model handling for virtio transitional
devices. Ex:

  <hostdev mode='subsystem' type='scsi_host' model='virtio-transitional'>
    <source protocol='vhost' wwpn=X/>
  </hostdev>

* "virtio-transitional" maps to qemu "vhost-scsi-pci-transitional"
* "virtio-non-transitional" maps to qemu "vhost-scsi-pci-non-transitional"

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:40 -05:00
Cole Robinson
ef41ff4219 conf: Add <hostdev model='virtio-{non-}transitional'/>
qemu vhost-scsi devices map to XML roughly like:

    <hostdev mode='subsystem' type='scsi_host'>
      <source protocol='vhost' wwpn=X/>
    </hostdev>

To support vhost-scsi-pci-{non-}traditional in qemu, we
need to to extend the SCSI Host hostdev XML to handle
model= value. This matches the XML model= format used
for mediated devices. This is just the domain_conf bits
and some XML test cases.

Use of virtio-X naming here does not match the hostdev
protocol=vhost nor does it match the qemu vhost-X device
naming, however it's more consistent with all other
model= names in this area, and also matches the
inconsistency of <vsock> devices which use model=virtio
but map to vhost-vsock on the qemu commandline

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:40 -05:00
Cole Robinson
4d964373b5 qemu: Support interface model=virtio-{non-}transitional
Add new <interface> model handling for virtio transitional devices. Ex:

<interface>
  <model type='virtio-transitional'/>
</interface>

* "virtio-transitional" maps to qemu "virtio-net-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-net-pci-non-transitional"

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:40 -05:00
Cole Robinson
239b535d99 qemu: Support disk model=virtio-{non-}transitional
Add new <disk> model values for virtio transitional devices. When
combined with bus='virtio':

* "virtio-transitional" maps to qemu "virtio-blk-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-blk-pci-non-transitional"

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:40 -05:00
Cole Robinson
25d05051b3 conf: Add <disk model='virtio-{non-}transitional'/>
<disk> devices lack the model= attribute which is used by
most other device types. bus= mostly acts as one, but it
serves other purposes too like determing what target=
prefix to use, and for matching against controller type=
values.

Extending bus= to handle additional virtio transitional
devices will complicate apps lives, and it isn't a clean
mapping anyways. So let's bite the bullet and add a new
<disk model=X/> attribute, and wire up common handling
for virtio and virtio-{non-}transitional

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:40 -05:00
Peter Krempa
9222b402e5 tests: qemuxml2argv: Add a 'serial' value for a SCSI disk
Upcoming addition of a new field will need to make sure that SCSI disk
serial is tested as well. Add a case to one of the existing tests.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2019-02-08 08:48:33 +01:00
Peter Krempa
ea13c12940 tests: qemuxml2argv: Add CDROM disks for all untested buses
Add full and empty cdroms on 'usb' and 'sd' bus to have test
coverage. Note that this does not guarantee that qemu will accept them.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2019-02-08 08:48:11 +01:00
Peter Krempa
5d884f3d3c qemu: Forbid cdroms on virtio bus
Attempting to create an empty virtio-blk drive results into:
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0xc,drive=drive-virtio-disk1,id=virtio-disk1: Device needs media, but drive is empty

Attempting to eject media from virtio-blk based drive results into:
error: internal error: unable to execute QEMU command 'eject': Device 'drive-virtio-disk0' is not removable

Forbid configurations where users would attempt to use cdroms in virtio
bus.

Fix few wrong examples which are not really relevant to the tested code.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2019-02-08 08:41:40 +01:00
Peter Krempa
61900c4cda tests: qemu: Merge 'disk-scsi-vscsi' test into 'disk-scsi'
As we support multiple scsi controllers there's no need to have a
special test for this controller.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2019-02-08 08:32:40 +01:00
Peter Krempa
ee39011a09 tests: qemu: Merge 'disk-scsi-mptsas1068' test into 'disk-scsi'
As we support multiple scsi controllers there's no need to have a
special test for this controller.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2019-02-08 08:32:40 +01:00