This deletes all trace of gnulib from libvirt. We still
have the keycodemapdb submodule to deal with. The simple
solution taken was to update it when running autogen.sh.
Previously gnulib could auto-trigger refresh when running
'make' too. We could figure out a solution for this, but
with the pending meson rewrite it isn't worth worrying
about, given how infrequently keycodemapdb changes.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we rely on gnulib creating configmake.h, but we
can easily create it ourselves instead.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We are in process of removing gnulib and adopting meson as our build
system. In order to help with the transition let's drop gnulib tests.
This will also help with the fact that before we will be able to drop
gnulib completely we will store output of bootstrap in git.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Any static list of images is destined to become outdated eventually,
so let's start generating it dynamically instead.
Unfortunately there doesn't seem to be a straightforward way to get
Podman/Docker to list all repositories under quay.io/libvirt, so we
have to resort to searching and filtering manually; and since the
two tools behave slightly differently in that regard, it's more
sane to have the logic in a separate shell script than it would be
to keep it inline in the Makefile with all the annoying escaping
doing so would entail.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the genaclperms.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the hvsupport.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
The new impl generates byte-for-byte identical output to the
old impl.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the check-file-access.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the group-qemu-caps.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The CI build machinery is intentionally not handled by autotools,
so for VPATH builds - which are mandatory now - we need to make
sure we're looking into $(srcdir).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the test-wrap-argv.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the pdwtags processing script in Python.
The original inline shell and perl code was completely
unintelligible. The new python code is a manual conversion
that attempts todo basically the same thing.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the genpolkit.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the check-aclrules.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the check-driverimpls.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the check-drivername.pl tool in Python.
This was mostly a straight conversion, manually going line-by-line
to change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
In testing though it was discovered the existing code was broken
since it hadn't been updated after driver.h was split into many
files. Since the old code is being thrown away, the fix was done
as part of the rewrite rather than split into a separate commit.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the gensystemtap.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the dtrace2systemtap.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
The "--with-modules" flag was dropped because this functionality
is not implicitly always enabled.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the check-symfile.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the check-symsorting.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the check-aclperms.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the header-ifdef.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the mock-noinline.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of an goal to eliminate Perl from libvirt build tools,
rewrite the prohibit-duplicate-header.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of an goal to eliminate Perl from libvirt build tools,
rewrite the minimize-po.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of an goal to eliminate Perl from libvirt build tools,
rewrite the augeas-gentest.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
The use of $(AUG_GENTEST) as a dependancy in the makefiles needed
to be fixed, because this was assumed to be the filename of the
script, but is in fact a full shell command line.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The gnulib syntax-check rules are spread across GNUmakefile, cfg.mk and
maint.mk. This made sense when we were getting two of the files from the
gnulib submodule. Now that we own all files though, we can at least
merge maint.mk and cfg.mk together. GNUmakefile can be eliminated when
we switch to meson.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The syntax-check rules are the one bit of make usage that will
stay around for a while after the meson conversion. Move them
into the build-aux directory in preparation for refactoring
to make them independent from automake.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We're going to be eliminating autotools and gnulib, but we still wish to
have the 'make syntax-check' functionality.
This imports the minimal set of gnulib files required to keep this
working.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'make distcheck' target validates that a tarball builds and
is ready for release. We expect that libvirt builds cleanly on
all supported platforms, so we should be enabling -Werror when
running distcheck.
This ensures that our CI systems in turn also use -Werror.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The use of this script was discontinued when we stopped providing a full
ChangeLog in the dist with:
commit ce97c33a79
Author: Andrea Bolognani <abologna@redhat.com>
Date: Mon Apr 1 17:33:03 2019 +0200
maint: Stop generating ChangeLog from git
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Python3 versions less than 3.7 have very unhelpful handling
of the C locale where they assume data is 7-bit only. This
violates POSIX which requires the C locale to be 8-bit clean.
Python3 >= 3.7 now assumes that the C locale is always UTF-8.
Set env variables to force LC_CTYPE to en_US.UTF-8 so that
we get UTF-8 handling on all python versions. Note we do
not use C.UTF-8 since not all C libraries support that.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This script is run before $(CI_BUILD_SCRIPT) and can be used
to tweak the environment as necessary before the build starts.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of hardcoding build instructions into the Makefile,
move them to a separate script that's mounted into the
container.
This gives us a couple of advantages: we no longer have to
deal with the awkward quoting required when embedding shell
code in a Makefile, and we also provide the users with a way
to override the default build instructions with their own.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We're going to have a few more CI-related files in a second, and
it makes sense to have a separate directory for them rather than
littering the root directory.
$(CI_SCRATCHDIR) can now also be created inside the CI directory,
and as a bonus the make rune necessary to start CI builds without
running configure first becomes shorter.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This reverts commit f38d553e2d.
Gnulib's make coverage (or init-coverage, build-coverage, gen-coverage)
is not a 1-1 replacement for the original configure option. Our old
--enable-test-coverage seems to be close to gnulib's make build-coverage
except gnulib runs lcov in that phase and the build actually fails for
me even before lcov is run. And since we want to be able to just build
libvirt without running lcov, I suggest reverting to our own
implementation.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-By: Eric Blake <eblake@redhat.com>
The way it works now the Makefile needs to be both make valid and automake
valid. That is fine for now, but if we want to use anything more advanced, like
conditionals, we cannot have it like that any more.
So instead forward all ci-* rules to that file.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If the source tree was freshly configured and no objects are
built yet then 'make check-access' has no test to run. Build
the sources beforehand.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The Travis CI system uses Docker containers for its build environment.
These are pre-built and hosted under quay.io/libvirt so that developers
can use them for reproducing problems locally.
Getting the right Docker command syntax to use them, however, is not
entirely easy. This patch addresses that usability issue by introducing
some make targets. To run a simple build (aka 'make all') using the
Fedora 28 container:
make ci-build@fedora-28
To also run unit tests
make ci-check@fedora-28
This is just syntax sugar for calling the previous command with a
custom make target
make ci-build@fedora-28 CI_MAKE_ARGS="check"
To do a purely interactive build it is possible to request a shell
make ci-shell@fedora-28
To do a MinGW build, it is currently possible to use the fedora-rawhide
image and request a different configure script
make ci-build@fedora-rawhide CI_CONFIGURE=mingw32-configure
It is also possible to do cross compiled builds via the Debian containers
make ci-build@debian-9-cross-s390x
In all cases the GIT source tree is cloned locally into a 'ci-tree/src'
sub-directory which is then exposed to the container at '/src'. It is
setup to use a separate build directory so the build takes place in a
subdir '/src/build'. A source tree build can be requested instead
by passing an empty string CI_VPATH= arg to make.
The make rules are kept in a standalone file that is included into the
main Makefile.am, so that it is possible to run them without having to
invoke autotools first.
It is neccessary to disable the gnulib submodule commit check because
this fails due to the way we have manually cloned submodule repos as
primary git repos with their own .git directory, instead of letting
git treat them as submodules in the top level .git directory.
make[1]: Entering directory '/src/build'
fatal: Not a valid object name origin
fatal: run_command returned non-zero status for .gnulib
.
maint.mk: found non-public submodule commit
make: *** [/src/maint.mk:1448: public-submodule-commit] Error 1
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Few of the scripts in build-aux are included in EXTRA_DIST. This is not
a serious problem since they are primarily tools intended for developers
upstream, and downstream builds won't need them. Having them missing,
however, complicates downstream patching because it means patches that
are auto-exported from git will fail to apply if they include a change
to a file in build-aux/. By bundling all these scripts in the dist we
make patching more straightforward.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This file contains the old school ChangeLog, which was manually
updated for every set of changes before the switch to git.
When libvirt was imported into git, however, *all* history was
preserved, including the changes documented in this file, and
can still be inspected using 'git log' just like more recent
changes: the format might be slightly different, but that's not
quite reason enough to treat this file any differently than the
git-generated ChangeLog we just dropped.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our ChangeLog is generated by basically redirecting the output
of 'git log' into it so, as can be expected, it has only gotten
bigger as development has progressed. As of today, its size has
reached pretty much comical levels:
$ du -sk ChangeLog
11328 ChangeLog
All of that for information *literally nobody* cares about: end
users and distro maintainers have proper release notes lovingly
compiled for them, while developers peruse the history either by
calling 'git log' directly or through their favorite $EDITOR's
git integration.
Replacing the generated ChangeLog with a short message pointing
interested parties to the git repository does not only reduce
the size of the unpacked sources from 259904 KiB to 248576 KiB
(~4% saving): from a quick test on my laptop, doing so reduces
the size of the *compressed* release archive from 15140 KiB to
12364 KiB (~18% saving) and also takes the time needed to run
'make distcheck' down from 4:44 to 4:21 (~8% saving).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We provide a custom configure option --enable-test-coverage and
'make cov' target to generate code coverage reports. However gnulib
already provides a 'make coverage' which 'just works' and doesn't
require a special configure option.
This drops our custom implementation in favor of 'make coverage'.
Reports are now output to cov/index.html
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The most important part is LIBVIRTD_PATH env var fix. It is used
in virFileFindResourceFull() from tests. The libvirtd no longer
lives under daemon/.
Then, libvirtd-fail test was still failing (as expected) but not
because of missing config file but because it was trying to
execute (nonexistent) top_builddir/daemon/libvirtd which
fulfilled expected outcome and thus test did not fail.
Thirdly, lcov was told to generate coverage for daemon/ dir too.
Fourthly, our compiling documentation was still suggesting to run
daemonn/libvirtd.
And finally, some comments in a systemtap file and a probes file
were still referring to daemon/libvirtd.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Instead of simply dumping the list of authors as obtained
from git, we can be a bit smarter and filter out maintainers
so that their names don't appear twice.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This is the only Python script which we invoke directly, which
works pretty fine in general but becomes a problem if the user
has explicitly overridden Python binary detection at configure
time.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
