We had loads of different styles in describing the @flags parameter
for various APIs, as well as several APIs that didn't list which
enums provided the bit values valid for the flags.
The end result is one of two formats:
@flags: bitwise-OR of vir...Flags
@flags: extra flags; not used yet, so callers should always pass 0
* src/libvirt.c: Use common sentences for flags. Also,
(virDomainGetBlockIoTune): Mention virTypedParameterFlags.
(virConnectOpenAuth): Mention virConnectFlags.
(virDomainMigrate, virDomainMigrate2, virDomainMigrateToURI)
(virDomainMigrateToURI2): Mention virDomainMigrateFlags.
(virDomainMemoryPeek): Mention virDomainMemoryFlags.
(virStoragePoolBuild): Mention virStoragePoolBuildFlags.
(virStoragePoolDelete): Mention virStoragePoolDeleteFlags.
(virStreamNew): Mention virStreamFlags.
(virDomainOpenGraphics): Mention virDomainOpenGraphicsFlags.
This *kind of* addresses:
https://bugzilla.redhat.com/show_bug.cgi?id=772395
(it doesn't eliminate the failure to start, but causes libvirt to give
a better idea about the cause of the failure).
If a guest uses a kvm emulator (e.g. /usr/bin/qemu-kvm) and the guest
is started when kvm isn't available (either because virtualization is
unavailable / has been disabled in the BIOS, or the kvm modules
haven't been loaded for some reason), a semi-cryptic error message is
logged:
libvirtError: internal error Child process (LC_ALL=C
PATH=/sbin:/usr/sbin:/bin:/usr/bin /usr/bin/qemu-kvm -device ? -device
pci-assign,? -device virtio-blk-pci,? -device virtio-net-pci,?) status
unexpected: exit status 1
This patch notices at process start that a guest needs kvm, and checks
for the presence of /dev/kvm (a reasonable indicator that kvm is
available) before trying to execute the qemu binary. If kvm isn't
available, a more useful (too verbose??) error is logged.
It should be a copy-paste error, the result is programming will result in an
infinite loop again due to without iterating 'j' variable.
* src/qemu/qemu_driver.c: fix a typo on qemuDomainSetBlkioParameters.
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=770520
Signed-off-by: Alex Jia <ajia@redhat.com>
I previously mentioned [1] a PolicyKit issue where libvirt would
proceed with authentication even though polkit-auth failed:
testusr xen134:~> virsh list --all
Attempting to obtain authorization for org.libvirt.unix.manage.
polkit-grant-helper: given auth type (8 -> yes) is bogus
Failed to obtain authorization for org.libvirt.unix.manage.
Id Name State
----------------------------------
0 Domain-0 running
- sles11sp1-pv shut off
AFAICT, libvirt attempts to obtain a privilege it already has,
causing polkit-auth to fail with above message. Instead of calling
obtain and then checking auth, IMO the workflow should be for the
server to check auth first, and if that fails ask the client to
obtain it and check again. This workflow also allows for checking
only successful exit of polkit-auth in virConnectAuthGainPolkit().
[1] https://www.redhat.com/archives/libvir-list/2011-December/msg00837.html
In the past, generic SCSI commands issued from a guest to a virtio
disk were always passed through to the underlying disk by qemu, and
the kernel would also pass them on.
As a result of CVE-2011-4127 (see:
http://seclists.org/oss-sec/2011/q4/536), qemu now honors its
scsi=on|off device option for virtio-blk-pci (which enables/disables
passthrough of generic SCSI commands), and the kernel will only allow
the commands for physical devices (not for partitions or logical
volumes). The default behavior of qemu is still to allow sending
generic SCSI commands to physical disks that are presented to a guest
as virtio-blk-pci devices, but libvirt prefers to disable those
commands in the standard virtio block devices, enabling it only when
specifically requested (hopefully indicating that the requester
understands what they're asking for). For this purpose, a new libvirt
disk device type (device='lun') has been created.
device='lun' is identical to the default device='disk', except that:
1) It is only allowed if bus='virtio', type='block', and the qemu
version is "new enough" to support it ("new enough" == qemu 0.11 or
better), otherwise the domain will fail to start and a
CONFIG_UNSUPPORTED error will be logged).
2) The option "scsi=on" will be added to the -device arg to allow
SG_IO commands (if device !='lun', "scsi=off" will be added to the
-device arg so that SG_IO commands are specifically forbidden).
Guests which continue to use disk device='disk' (the default) will no
longer be able to use SG_IO commands on the disk; those that have
their disk device changed to device='lun' will still be able to use SG_IO
commands.
*docs/formatdomain.html.in - document the new device attribute value.
*docs/schemas/domaincommon.rng - allow it in the RNG
*tests/* - update the args of several existing tests to add scsi=off, and
add one new test that will test scsi=on.
*src/conf/domain_conf.c - update domain XML parser and formatter
*src/qemu/qemu_(command|driver|hotplug).c - treat
VIR_DOMAIN_DISK_DEVICE_LUN *almost* identically to
VIR_DOMAIN_DISK_DEVICE_DISK, except as indicated above.
Note that no support for this new device value was added to any
hypervisor drivers other than qemu, because it's unclear what it might
mean (if anything) to those drivers.
This patch adds two capabilities flags to deal with various aspects
of supporting SG_IO commands on virtio-blk-pci devices:
QEMU_CAPS_VIRTIO_BLK_SCSI
set if -device virtio-blk-pci accepts the scsi="on|off" option
When present, this is on by default, but can be set to off to disable
SG_IO functions.
QEMU_CAPS_VIRTIO_BLK_SG_IO
set if SG_IO commands are supported in the virtio-blk-pci driver
(present since qemu 0.11 according to a qemu developer, if I
understood correctly)
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=638633
Although scripts are not used by interfaces of type other than
"ethernet" in qemu, due to the fact that the parser stores the script
name in a union that is only valid when type is ethernet or bridge,
there is no way for anyone except the parser itself to catch the
problem of specifying an interface script for an inappropriate
interface type (by the time the parsed data gets back to the code that
called the parser, all evidence that a script was specified is
forgotten).
Since the parser itself should be agnostic to which type of interface
allows scripts (an example of why: a script specified for an interface
of type bridge is valid for xen domains, but not for qemu domains),
the solution here is to move the script out of the union(s) in the
DomainNetDef, always populate it when specified (regardless of
interface type), and let the driver decide whether or not it is
appropriate.
Currently the qemu, xen, libxml, and uml drivers recognize the script
parameter and do something with it (the uml driver only to report that
it isn't supported). Those drivers have been updated to log a
CONFIG_UNSUPPORTED error when a script is specified for an interface
type that's inappropriate for that particular hypervisor.
(NB: There was earlier discussion of solving this problem by adding a
VALIDATE flag to all libvirt APIs that accept XML, which would cause
the XML to be validated against the RNG files. One statement during
that discussion was that the RNG shouldn't contain hypervisor-specific
things, though, and a proper solution to this problem would require
that (again, because a script for an interface of type "bridge" is
accepted by xen, but not by qemu).
Commit ae523427 missed one pair of functions that could use
the helper routine.
* src/qemu/qemu_driver.c (qemuSetSchedulerParametersFlags)
(qemuGetSchedulerParametersFlags): Simplify.
On rawhide, gcc is new enough to output new DWARF information that
pdwtags has not yet learned, but the resulting 'make check' output
was rather confusing:
$ make -C src check
...
GEN virkeepaliveprotocol-structs
die__process_function: DW_TAG_INVALID (0x4109) @ <0x58c> not handled!
WARNING: your pdwtags program is too old
WARNING: skipping the virkeepaliveprotocol-structs test
WARNING: install dwarves-1.3 or newer
...
$ pdwtags --version
v1.9
I've filed the pdwtags deficiency as
https://bugzilla.redhat.com/show_bug.cgi?id=772358
* src/Makefile.am (PDWTAGS): Don't leave -t file behind on version
mismatch. Soften warning message, since 1.9 is newer than 1.3.
Don't leak stderr from broken version.
Commit db371a2 mistakenly added new functions inside a #ifndef WIN32
guard, even though they are needed on all platforms.
* src/util/command.c (virCommandFDSet): Move outside WIN32
conditional.
Detected by valgrind. Leak introduced in commit 5745dc1.
* src/qemu/qemu_command.c: fix memory leak on failure and successful path.
* How to reproduce?
% valgrind -v --leak-check=full ./qemuargv2xmltest
* Actual result:
==2196== 80 bytes in 1 blocks are definitely lost in loss record 3 of 4
==2196== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==2196== by 0x39CF07F6E1: strdup (in /lib64/libc-2.12.so)
==2196== by 0x419823: qemuParseRBDString (qemu_command.c:1657)
==2196== by 0x4221ED: qemuParseCommandLine (qemu_command.c:5934)
==2196== by 0x422AFB: qemuParseCommandLineString (qemu_command.c:7561)
==2196== by 0x416864: testCompareXMLToArgvHelper (qemuargv2xmltest.c:48)
==2196== by 0x417DB1: virtTestRun (testutils.c:141)
==2196== by 0x415CAF: mymain (qemuargv2xmltest.c:175)
==2196== by 0x4174A7: virtTestMain (testutils.c:696)
==2196== by 0x39CF01ECDC: (below main) (in /lib64/libc-2.12.so)
==2196==
==2196== LEAK SUMMARY:
==2196== definitely lost: 80 bytes in 1 blocks
Signed-off-by: Alex Jia <ajia@redhat.com>
When setting numa nodeset for a domain which has no nodeset set
before, libvirtd crashes by dereferencing the pointer to the old
nodemask which is null in that case.
Commit baade4d fixed a memory leak on failure, but in the process,
introduced a use-after-free on success, which can be triggered with:
1. set bandwidth with --live
2. query bandwidth
3. set bandwidth with --live
* src/qemu/qemu_driver.c (qemuDomainSetInterfaceParameters): Don't
free newBandwidth on success.
Reported by Hu Tao.
Commit b434329 has a logic bug: seclabel overrides don't set
def->type, but the default value is 0 (aka static). Restarting
libvirtd would thus reject the XML for any domain with an
override of <seclabel relabel='no'/> (which happens quite
easily if a disk image lives on NFS), with a message:
2012-01-04 22:29:40.949+0000: 6769: error : virSecurityLabelDefParseXMLHelper:2593 : XML error: security label is missing
Fix the logic to never read from an override's def->type, and
to allow a missing <label> subelement when relabel is no. There's
a lot of stupid double-negatives in the code (!norelabel) because
of the way that we want the zero-initialized defaults to behave.
* src/conf/domain_conf.c (virSecurityLabelDefParseXMLHelper): Use
type field from correct location.
Currently, virCommand implementation uses FD_ macros from
sys/select.h. However, those cannot handle more opened files
than FD_SETSIZE. Therefore switch to generalized implementation
based on array of integers.
xen-unstable c/s 23874:651aed73b39c added another member to
xen_domctl_getdomaininfo struct and bumped domctl version to 8.
Add a corresponding domctl v8 struct in xen hypervisor sub-driver
and detect domctl v8 during initialization.
The console path in xenstore is /local/domain/<id>/console/tty
for PV guests (PV console) and /local/domain/<id>/serial/0/tty
(serial console) for HVM guests. Similar to Xen's in-tree console
client, read the correct path for PV vs HVM.
It is a good practise to set revents to zero before doing any poll().
Moreover, we should check if event we waited for really occurred or
if any of fds we were polling on didn't encountered hangup.
Most severe here is a latent (but currently untriggered) memory leak
if any hypervisor ever adds a string interface property; the
remainder are mainly cosmetic.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BANDWIDTH_*): Move
macros closer to interface that uses them, and document type.
* src/libvirt.c (virDomainSetInterfaceParameters)
(virDomainGetInterfaceParameters): Formatting tweaks.
* daemon/remote.c (remoteDispatchDomainGetInterfaceParameters):
Avoid memory leak.
* src/libvirt_public.syms (LIBVIRT_0.9.9): Sort lines.
* src/libvirt_private.syms (domain_conf.h): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetInterfaceParameters): Fix
comments, break long lines.
Hi,
this is the fifth version of my SRV record for DNSMasq patch rebased
for the current codebase to the bridge driver and libvirt XML file to
include support for the SRV records in the DNS. The syntax is based on
DNSMasq man page and tests for both xml2xml and xml2argv were added as
well. There are some things written a better way in comparison with
version 4, mainly there's no hack in tests/networkxml2argvtest.c and
also the xPath context is changed to use a simpler query using the
virXPathInt() function relative to the current node.
Also, the patch is also fixing the networkxml2argv test to pass both
checks, i.e. both unit tests and also syntax check.
Please review,
Michal
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Leak detected by Coverity, and introduced in commit 93ab585.
Reported by Alex Jia.
* src/qemu/qemu_driver.c (qemuDomainSetBlkioParameters): Free
devices array on error.
The blocks to extract node information on a per-arch
basis wasn't well balanced leading to a compilation
failure if not on one of the handled arches (PCs and PPCs)
This wires up the XML changes in the previous patch to let SELinux
labeling honor user overrides, as well as affecting the live XML
configuration in one case where the user didn't specify anything
in the offline XML.
I noticed that the logs contained messages like this:
2011-12-05 23:32:40.382+0000: 26569: warning : SELinuxRestoreSecurityFileLabel:533 : cannot lookup default selinux label for /nfs/libvirt/images/dom.img
for all my domain images living on NFS. But if we would just remember
that on domain creation that we were unable to set a SELinux label (due to
NFSv3 lacking labels, or NFSv4 not being configured to expose attributes),
then we could avoid wasting the time trying to clear the label on
domain shutdown. This in turn is one less point of NFS failure,
especially since there have been documented cases of virDomainDestroy
hanging during an attempted operation on a failed NFS connection.
* src/security/security_selinux.c (SELinuxSetFilecon): Move guts...
(SELinuxSetFileconHelper): ...to new function.
(SELinuxSetFileconOptional): New function.
(SELinuxSetSecurityFileLabel): Honor override label, and remember
if labeling failed.
(SELinuxRestoreSecurityImageLabelInt): Skip relabeling based on
override.
Implement the parsing and formatting of the XML addition of
the previous commit. The new XML doesn't affect qemu command
line, so we can now test round-trip XML->memory->XML handling.
I chose to reuse the existing structure, even though per-device
override doesn't use all of those fields, rather than create a
new structure, in order to reuse more code.
* src/conf/domain_conf.h (_virDomainDiskDef): Add seclabel member.
* src/conf/domain_conf.c (virDomainDiskDefFree): Free it.
(virSecurityLabelDefFree): New function.
(virDomainDiskDefFormat): Print it.
(virSecurityLabelDefFormat): Reduce output if model not present.
(virDomainDiskDefParseXML): Alter signature, and parse seclabel.
(virSecurityLabelDefParseXML): Split...
(virSecurityLabelDefParseXMLHelper): ...into new helper.
(virDomainDeviceDefParse, virDomainDefParseXML): Update callers.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-dynamic-override.args:
New file.
* tests/qemuxml2xmltest.c (mymain): Enhance test.
* tests/qemuxml2argvtest.c (mymain): Likewise.
A future patch will parse and output <seclabel> in more than one
location in a <domain> xml; make it easier to reuse code.
* src/conf/domain_conf.c (virSecurityLabelDefFree): Rename...
(virSecurityLabelDefClear): ...and make static.
(virSecurityLabelDefParseXML): Alter signature.
(virDomainDefParseXML, virDomainDefFree): Adjust callers.
(virDomainDefFormatInternal): Split output...
(virSecurityLabelDefFormat): ...into new helper.
* daemon/remote.c: implement the server side support
* src/remote/remote_driver.c: implement the client side support
* src/remote/remote_protocol.x: definitions for the new entry points
* src/remote_protocol-structs: structure definitions
The APIs are used to set/get domain's network interface's parameters.
Currently supported parameters are bandwidth settings.
* include/libvirt/libvirt.h.in: new API and parameters definition
* python/generator.py: skip the Python API generation
* src/driver.h: add new entry to the driver structure
* src/libvirt_public.syms: export symbols
https://bugzilla.redhat.com/show_bug.cgi?id=770520
We had two nested loops both trying to use 'i' as the iteration
variable, which can result in an infinite loop when the inner
loop interferes with the outer loop. Introduced in commit 93ab585.
* src/qemu/qemu_driver.c (qemuDomainSetBlkioParameters): Don't
reuse iteration variable across two loops.
This patch adds max_files option to qemu.conf which can be used to
override system default limit on number of opened files that are
allowed for qemu user.
Remove the requirement that DHCP messages have to be broadcasted.
DHCP requests are most often sent via broadcast but can be directed
towards a specific DHCP server. For example 'dhclient' takes '-s <server>'
as a command line parameter thus allowing DHCP requests to be sent to a
specific DHCP server.
Add logic to assign addresses for devices with spapr-vio addresses.
We also do validation of addresses specified by the user, ie. ensuring
that there are not duplicate addresses on the bus.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
For QEMU PPC64 we have a machine type ("pseries") which has a virtual
bus called "spapr-vio". We need to be able to create devices on this
bus, and as such need a way to specify the address for those devices.
This patch adds a new address type "spapr-vio", which achieves this.
The addressing is specified with a "reg" property in the address
definition. The reg is optional, if it is not specified QEMU will
auto-assign an address for the device.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Currently non-x86 guests must have <acpi/> defined in <features> to
prevent libvirt from running qemu with -no-acpi. Although it works, it
is a hack.
Instead add a capability flag which indicates whether qemu understands
the -no-acpi option. Use it to control whether libvirt emits -no-acpi.
Current versions of qemu always display -no-acpi in their help output,
so this patch has no effect. However the development version of qemu
has been modified such that -no-acpi is only displayed when it is
actually supported.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
The RPC code had several latent memory leaks and an attempt to
free the wrong string, but thankfully nothing triggered them
(blkiotune was the only one returning a string, and always as
the last parameter). Also, our cleanups for rpcgen ended up
nuking a line of code that renders VIR_TYPED_PARAM_INT broken,
because it was the only use of 'i' in a function, even though
it was a member usage rather than a standalone declaration.
* daemon/remote.c (remoteSerializeTypedParameters): Free the
correct array element.
(remoteDispatchDomainGetSchedulerParameters)
(remoteDispatchDomainGetSchedulerParametersFlags)
(remoteDispatchDomainBlockStatsFlags)
(remoteDispatchDomainGetMemoryParameters): Don't leak strings.
* src/rpc/genprotocol.pl: Don't nuke member-usage of 'buf' or 'i'.
The lifetime of the virDomainEventState object is tied to
the lifetime of the driver, which in stateless drivers is
tied to the lifetime of the virConnectPtr.
If we add & remove a timer when allocating/freeing the
virDomainEventState object, we can get a situation where
the timer still triggers once after virDomainEventState
has been freed. The timeout callback can't keep a ref
on the event state though, since that would be a circular
reference.
The trick is to only register the timer when a callback
is registered with the event state & remove the timer
when the callback is unregistered.
The demo for the bug is to run
while true ; do date ; ../tools/virsh -q -c test:///default 'shutdown test; undefine test; dominfo test' ; done
prior to this fix, it will frequently hang and / or
crash, or corrupt memory
Currently all drivers using domain events need to provide a callback
for handling a timer to dispatch events in a clean stack. There is
no technical reason for dispatch to go via driver specific code. It
could trivially be dispatched directly from the domain event code,
thus removing tedious boilerplate code from all drivers
Also fix the libxl & xen drivers to pass 'true' when creating the
virDomainEventState, since they run inside the daemon & thus always
expect events to be present.
* src/conf/domain_event.c, src/conf/domain_event.h: Internalize
dispatch of events from timer callback
* src/libxl/libxl_driver.c, src/lxc/lxc_driver.c,
src/qemu/qemu_domain.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Remove all timer dispatch functions
The virDomainEventCallbackList and virDomainEventQueue APIs are
now solely helpers used internally by virDomainEventState APIs.
Remove their decls from domain_event.h since no driver code should
need to use them any more.
* src/conf/domain_event.c: Make virDomainEventCallbackList and
virDomainEventQueue APIs static & remove some unused APIs
* src/conf/domain_event.h, src/libvirt_private.syms: Remove
virDomainEventCallbackList and virDomainEventQueue APIs
No caller of the domain events APIs should need to poke at the
struct internals. Thus they should all be removed from the
header file
* src/conf/domain_event.h: Remove struct definitions
* src/conf/domain_event.c: Add struct definitions
While virDomainEventState has APIs for managing removal of callbacks,
while locked, adding callbacks in the first place requires direct
access to the virDomainEventCallbackList structure. This is not
threadsafe since it is bypassing the virDomainEventState locks
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Add APIs for managing callbacks
via virDomainEventState.
When registering a callback for a particular event some callers
need to know how many callbacks already exist for that event.
While it is possible to ask for a count, this is not free from
race conditions when threaded. Thus the API for registering
callbacks should return the count of callbacks. Also rename
virDomainEventStateDeregisterAny to virDomainEventStateDeregisterID
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Return count of callbacks when
registering callbacks
* src/libxl/libxl_driver.c, src/libxl/libxl_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/remote/remote_driver.c, src/uml/uml_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c: Update
for change in APIs
The Xen & VBox drivers deal with callbacks & dispatching of
events directly. All the other drivers use a timer to dispatch
events from a clean stack state, rather than deep inside the
drivers. Convert Xen & VBox over to virDomainEventState so
that they match behaviour of other drivers
* src/conf/domain_event.c: Return count of remaining
callbacks when unregistering event callback
* src/vbox/vbox_tmpl.c, src/xen/xen_driver.c,
src/xen/xen_driver.h: Convert to virDomainEventState
If only iptables rules are created then two unnecessary ebtables chains
are also created. This patch fixes this and prevents these chains from
being created. They have been cleaned up properly, though.
A generic error code was returned, if the user aborted a migration job.
This made it hard to distinguish between a user requested abort and an
error that might have occured. This patch introduces a new error code,
which is returned in the specific case of a user abort, while leaving
all other failures with their existing code. This makes it easier to
distinguish between failure while mirgrating and an user requested
abort.
* include/libvirt/virterror.h: - add new error code
* src/util/virterror.c: - add message for the new error code
* src/qemu/qemu_migration.h: - Emit operation aborted error instead of
operation failed, on migration abort
If managed save fails at the right point in time, then the save
image can end up with 0 bytes in length (no valid header), and
our attempts in commit 55d88def to detect and skip invalid save
files missed this case.
* src/qemu/qemu_driver.c (qemuDomainSaveImageOpen): Also unlink
empty file as corrupt. Reported by Dennis Householder.
Currently, on device detach, we parse given XML, find the device
in domain object, free it and try to restore security labels.
However, in some cases (e.g. usb hostdev) parsed XML contains
less information than freed device. In usb case it is bus & device
IDs. These are needed during label restoring as a symlink into
/dev/bus is generated from them. Therefore don't drop device
configuration until security labels are restored.
In commit 6f84e110 I mistakenly set default migration speed to
33554432 Mb! The units of migMaxBandwidth is Mb, with conversion
handled in qemuMonitor{JSON,Text}SetMigrationSpeed().
Also, remove definition of QEMU_DOMAIN_FILE_MIG_BANDWIDTH_MAX since
it is no longer used after reverting commit ef1065cf.
If an async job run on a domain will stop the domain at the end of the
job, a concurrently run query job can hang in qemu monitor and nothing
can be done with that domain from this point on. An attempt to start
such domain results in "Timed out during operation: cannot acquire state
change lock" error.
However, quite a few things have to happen at the right time... There
must be an async job running which stops a domain at the end. This race
was reported with dump --crash but other similar jobs, such as
(managed)save and migration, should be able to trigger this bug as well.
While this async job is processing its last monitor command, that is a
query-migrate to which qemu replies with status "completed", a new
libvirt API that results in a query job must arrive and stay waiting
until the query-migrate command finishes. Once query-migrate is done but
before the async job closes qemu monitor while stopping the domain, the
other thread needs to wake up and call qemuMonitorSend to send its
command to qemu. Before qemu gets a chance to respond to this command,
the async job needs to close the monitor. At this point, the query job
thread is waiting for a condition that no-one will ever signal so it
never finishes the job.
* src/qemu/qemu_hostdev.c (qemuDomainReAttachHostdevDevices):
pciDeviceListFree(pcidevs) in the end free()s the device even if
it's in use by other domain, which can cause a race.
How to reproduce:
<script>
virsh nodedev-dettach pci_0000_00_19_0
virsh start test
virsh attach-device test hostdev.xml
virsh start test2
for i in {1..5}; do
echo "[ -- ${i}th time --]"
virsh nodedev-reattach pci_0000_00_19_0
done
echo "clean up"
virsh destroy test
virsh nodedev-reattach pci_0000_00_19_0
</script>
Device pci_0000_00_19_0 dettached
Domain test started
Device attached successfully
error: Failed to start domain test2
error: Requested operation is not valid: PCI device 0000:00:19.0 is in use by domain test
[ -- 1th time --]
Device pci_0000_00_19_0 re-attached
[ -- 2th time --]
Device pci_0000_00_19_0 re-attached
[ -- 3th time --]
Device pci_0000_00_19_0 re-attached
[ -- 4th time --]
Device pci_0000_00_19_0 re-attached
[ -- 5th time --]
Device pci_0000_00_19_0 re-attached
clean up
Domain test destroyed
Device pci_0000_00_19_0 re-attached
The patch also fixes another problem, there won't be error like
"qemuDomainReAttachHostdevDevices: Not reattaching active
device 0000:00:19.0" in daemon log if some device is in active.
As pciResetDevice and pciReattachDevice won't be called for
the device anymore. This is sensible as we already reported
error when preparing the device if it's active. Blindly trying
to pciResetDevice & pciReattachDevice on the device and getting
an error is just redundant.
This patch fixes two problems:
1) The device will be reattached to host even if it's not
managed, as there is a "pciDeviceSetManaged".
2) The device won't be reattached to host with original
driver properly. As it doesn't honor the device original
properties which are maintained by driver->activePciHostdevs.
This chunk of code below repeated in several functions, factor it into
a helper method virDomainLiveConfigHelperMethod to eliminate duplicated code
based on Eric and Adam's suggestion. I have tested it for all the
relevant APIs changed.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
If the vol object is newly created, it increases the volumes count,
but doesn't decrease the volumes count when do cleanup. It can
cause libvirtd to crash when one trying to free the volume objects
like:
for (i = 0; i < pool->volumes.count; i++)
virStorageVolDefFree(pool->volumes.objs[i]);
It's more reliable if we add the newly created vol object in the
end.
When destroying a domain qemuDomainDestroy kills its qemu process and
starts a new job, which means it unlocks the domain object and locks it
again after some time. Although the object is usually unlocked for a
pretty short time, chances are another thread processing an EOF event on
qemu monitor is able to lock the object first and does all the cleanup
by itself. This leads to wrong shutoff reason and lifecycle event detail
and virDomainDestroy API incorrectly reporting failure to destroy an
inactive domain.
Reported by Charlie Smurthwaite.
Current "-ay | -an" has problems on pool starting/refreshing if
the volumes are clustered. Rommer has posted a patch to list 2
months ago.
https://www.redhat.com/archives/libvir-list/2011-October/msg01116.html
But IMO we shouldn't skip the inactived vols. So this is a squashed
patch by Rommer.
Signed-off-by: Rommer <rommer@active.by>
Network disks don't have paths to be resolved or files to be checked
for ownership. ee3efc41e6 checked this
for some image label functions, but was partially reverted in a
refactor. This finishes adding the check to each security driver's
set and restore label methods for images.
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
This patch addresses https://bugzilla.redhat.com/show_bug.cgi?id=760442
When a network has any forward type other than route, nat or none, the
network configuration should be done completely external to libvirt -
libvirt only uses these types to allow configuring guests in a manner
that isn't tied to a specific host (all the host-specific information,
in particular interface names, port profile data, and bandwidth
configuration is in the network definition, and the guest
configuration only references it).
Due to a bug in the bridge network driver, libvirt was adding iptables
rules for networks with forward type='bridge' etc. any time libvirtd
was restarted while one of these networks was active.
This patch eliminates that error by only "reloading" iptables rules if
forward type is route, nat, or none.
Currently qemuDomainAssignPCIAddresses() is called to assign addresses
to PCI devices.
We need to do something similar for devices with spapr-vio addresses.
So create one place where address assignment will be done, that is
qemuDomainAssignAddresses().
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
For the PPC64 pseries machine type we need to add address information
for the spapr-vty device.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
In QEMU PPC64 we have a network device called "spapr-vlan". We can specify
this using the existing syntax for network devices, however libvirt
currently rejects "spapr-vlan" in virDomainNetDefParseXML() because of
the "-". Fix the code to accept "-".
* src/conf/domain_conf.c (virDomainNetDefParseXML): Allow '-' in
model name, and be more efficient.
* docs/schemas/domaincommon.rng: Limit valid model names to match code.
Based on a patch by Michael Ellerman.
When parsing ppc64 models on an x86 host an out-of-memory error message is displayed due
to it checking for retcpus being NULL. Fix this by removing the check whether retcpus is NULL
since we will realloc into this variable.
Also in the X86 model parser display the OOM error at the location where it happens.
Fix memory leak:
==27534== 24 bytes in 1 blocks are definitely lost in loss record 207 of 530
==27534== at 0x4A05E46: malloc (vg_replace_malloc.c:195)
==27534== by 0x38EC26EC37: vasprintf (in /lib64/libc-2.13.so)
==27534== by 0x4E998E6: virVasprintf (util.c:1677)
==27534== by 0x4E999F1: virAsprintf (util.c:1695)
==27534== by 0x4F1EAAC: nodeGetInfo (nodeinfo.c:593)
==27534== by 0x47948F: qemuCapsInitCPU (qemu_capabilities.c:855)
==27534== by 0x4796B1: qemuCapsInit (qemu_capabilities.c:915)
==27534== by 0x456550: qemuCreateCapabilities (qemu_driver.c:245)
==27534== by 0x4578C4: qemudStartup (qemu_driver.c:580)
==27534== by 0x4F20886: virStateInitialize (libvirt.c:852)
==27534== by 0x420E55: daemonRunStateInit (libvirtd.c:1156)
==27534== by 0x4E94C56: virThreadHelper (threads-pthread.c:157)
Mark this leaked variable as const char * when it is passed into another
function.
Pool creates new workers dynamically. However, it is possible
for a pool to have no workers. If we want to free that pool,
we don't want to wait on quit condition as it will never be
signaled.
Add support for newly supported Intel cpu features. Newly supported
flags are: pclmuldq, dtes64, smx, fma, pdcm, movbe, xsave, osxsave and
avx. This adds support for Intel's Sandy Bridge platform.
A preparatory patch for DHCP snooping where we want to be able to
differentiate between a VM's interface using the tuple of
<VM UUID, Interface MAC address>. We assume that MAC addresses could
possibly be re-used between different networks (VLANs) thus do not only
want to rely on the MAC address to identify an interface.
At the current 'final destination' in virNWFilterInstantiate I am leaving
the vmuuid parameter as ATTRIBUTE_UNUSED until the DHCP snooping patches arrive.
(we may not post the DHCP snooping patches for 0.9.9, though)
Mostly this is a pretty trivial patch. On the lowest layers, in lxc_driver
and uml_conf, I am passing the virDomainDefPtr around until I am passing
only the VM's uuid into the NWFilter calls.
This patch cleans up return codes in the nwfilter subsystem.
Some functions in nwfilter_conf.c (validators and formatters) are
keeping their bool return for now and I am converting their return
code to true/false.
All other functions now have failure return codes of -1 and success
of 0.
[I searched for all occurences of ' 1;' and checked all 'if ' and
adapted where needed. After that I did a grep for 'NWFilter' in the source
tree.]
In some error situations, the function testDomainRestoreFlags() could
unlock the test driver mutex without first locking it. This patch
moves the lock operation earlier, so that it occurs before any
potential jump down to the unlock call.
I found this problem while auditing the test driver lock usage to
determine the cause of a hang while running the following test:
cd tests; while true; do printf x; ./undefine; done
This patch *does not* solve that problem, but we now understand its
actual source, and danpb is working on a patch.
assumptions from generic code.
This implements the minimal set of changes needed in libvirt to launch a
PowerPC-KVM based guest.
It removes x86-specific assumptions about choice of serial driver backend
from generic qemu guest commandline generation code.
It also restricts the ACPI capability to be available for an x86 or
x86_64 domain.
This is not a complete solution -- it still does not guarantee libvirt
the capability to flag non-supported options in guest XML. (Eg, an ACPI
specification in a PowerPC guest XML will still get processed, even
though qemu-system-ppc64 does not support it while qemu-system-x86_64 does.)
This drawback exists because libvirt falls back on qemu to query supported
features, and qemu '-h' blindly lists all capabilities -- irrespective
of whether they are available while emulating a given architecture or not.
The long-term solution would be for qemu to list out capabilities based
on architecture and platform -- so that libvirt can cleanly make out what
devices are supported on an arch (say 'ppc64') and platform (say, 'mac99').
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
This enables libvirt to select the correct qemu binary (qemu-system-ppc64)
for a guest vm based on arch 'ppc64'.
Also, libvirt is enabled to correctly parse the list of supported PowerPC
CPUs, generated by running 'qemu-system-ppc64 -cpu ?'
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Acked-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
/proc/cpuinfo
Libvirt at present depends on /proc/cpuinfo to gather host
details such as CPUs, cores, threads, etc. This is an architecture-
dependent approach. An alternative is to use 'Sysfs', which provides
a platform-agnostic interface to parse host CPU topology.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
On RHEL 5, with libxml2-2.6.26, the build failed with:
virsh.c: In function 'vshNodeIsSuperset':
virsh.c:11951: warning: implicit declaration of function 'xmlChildElementCount'
(or if warnings aren't errors, a link failure later on).
* src/util/xml.h (virXMLChildElementCount): New prototype.
* src/util/xml.c (virXMLChildElementCount): New function.
* src/libvirt_private.syms (xml.h): Export it.
* tools/virsh.c (vshNodeIsSuperset): Use it.
When one thread passes the buck to another thread, it uses
virCondSignal to wake up the target thread. The variable
'haveTheBuck' is not updated in a race-free manner when
this occurs. The current thread sets it to false, and the
woken up thread sets it to true. There is a window where
a 3rd thread can come in and grab the buck.
Even if this didn't lead to crashes & deadlocks, this would
still result in unfairness in the buckpassing algorithm.
A better solution is to *never* set haveTheBuck to false
when we're passing the buck. Only set it to false when there
is no further thread waiting for the buck.
* src/rpc/virnetclient.c: Only set haveTheBuck to false
if no thread is waiting
Commit fd06692544 tried to fix
a race condition in
commit fa9595003d
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Fri Nov 11 15:28:41 2011 +0000
Explicitly track whether the buck is held in remote client
Unfortunately there is a second race condition whereby the
event loop can trigger due to incoming data to read. Revert
this fix, so a complete fix for the problem can be cleanly
applied
* src/rpc/virnetclient.c: Revert fd06692544
With security_driver set to "none" in /etc/libvirt/qemu.conf,
libvirtd would crash when attempted to attach to an existing
qemu process. Only copy the security model if it actually exists.
During virDomainDestroy, QEMU may emit SHUTDOWN event as a response to
SIGTERM and since domain object is still locked, the event is processed
after the domain is destroyed. We need to ignore this event in such case
to avoid changing domain state from shutoff to shutdown.
This patch is to expose the fabric_name of fc_host class, which
might be useful for users who wants to known which fabric the
(v)HBA connects to.
The patch also adds the missed capabilities' XML schema of scsi_host,
(of course, with fabric_wwn added), and update the documents
(docs/formatnode.html.in)
Currently if you try to connect to a local libvirtd when
libvirtd is not in $PATH, you'll get an error
error: internal error invalid use of command API
This is because remoteFindDaemonPath() returns NULL, which
causes us to pass NULL into virNetSocketConnectUNIX which
in turn causes us to pass NULL into virCommandNewArgList.
Adding missing error checks improves this to
error: internal error Unable to locate libvirtd daemon in $PATH
* src/remote/remote_driver.c: Report error if libvirtd
cannot be found
* src/rpc/virnetsocket.c: Report error if caller requested
spawning of daemon, but provided no binary path
The Mingw32 linker highlighted that the symbols for virtime.h
declared in libvirt_private.syms were incorrect
* src/libvirt_private.syms: Fix virtime.h symbols
When QEMU guest finishes its shutdown sequence, qemu stops virtual CPUs
and when started with -no-shutdown waits for us to kill it using
SGITERM. Since QEMU is flushing its internal buffers, some time may pass
before QEMU actually dies. We mistakenly used "paused" state (and
events) for this which is quite confusing since users may see a domain
going to pause while they expect it to shutdown. Since we already have
"shutdown" state with "the domain is being shut down" semantics, we
should use it for this state.
However, the state didn't have a corresponding event so I created one
and called its detail as VIR_DOMAIN_EVENT_SHUTDOWN_FINISHED (guest OS
finished its shutdown sequence) with the intent to add
VIR_DOMAIN_EVENT_SHUTDOWN_STARTED in the future if we have a
sufficiently capable guest agent that can notify us when guest OS starts
to shutdown.
Otherwise connections to older libvirt abort with:
$ virsh -c qemu+ssh://host.example.com/system list
error: invalid connection pointer in virDrvSupportsFeature
error: failed to connect to the hypervisor
Tested against 0.8.3 and 0.9.8-rc2.
https://bugzilla.redhat.com/show_bug.cgi?id=648855 mentioned a
misuse of 'an' where 'a' is proper; that has since been fixed,
but a search found other problems (some were a spelling error for
'and', while most were fixed by 'a').
* daemon/stream.c: Fix grammar.
* src/conf/domain_conf.c: Likewise.
* src/conf/domain_event.c: Likewise.
* src/esx/esx_driver.c: Likewise.
* src/esx/esx_vi.c: Likewise.
* src/rpc/virnetclient.c: Likewise.
* src/rpc/virnetserverprogram.c: Likewise.
* src/storage/storage_backend_fs.c: Likewise.
* src/util/conf.c: Likewise.
* src/util/dnsmasq.c: Likewise.
* src/util/iptables.c: Likewise.
* src/xen/xen_hypervisor.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* src/xen/xs_internal.c: Likewise.
* tools/virsh.c: Likewise.
virBufferContentAndReset (intentionally) returns NULL for a buffer
with no content, but it is feasible to invoke a command with an
explicit empty string.
* src/util/command.c (virCommandAddEnvBuffer): Reject empty string.
(virCommandAddArgBuffer): Allow explicit empty argument.
* tests/commandtest.c (test9): Test it.
* tests/commanddata/test9.log: Adjust.
The RPC fixups needed on Linux are also needed on cygwin, and
worked without further tweaking to the list of fixups. Also,
unlike BSD, Cygwin exports 'struct ifreq', but unlike Linux,
Cygwin lacks the ioctls that we were using 'struct ifreq' to
access. This patch allows compilation under cygwin.
* src/rpc/genprotocol.pl: Also perform fixups on cygwin.
* src/util/virnetdev.c (HAVE_STRUCT_IFREQ): Also require AF_PACKET
definition.
* src/util/virnetdevbridge.c (virNetDevSetupControlFull): Only
compile if SIOCBRADDBR works.
The pathname for the pipe for tunnelled migration is unresolvable. The
libvirt apparmor driver therefore refuses access, causing migration to
fail. If we can't resolve the path, the worst that can happen is that
we should have given permission to the file but didn't. Otherwise
(especially since this is a /proc/$$/fd/N file) the file is already open
and libvirt won't be refused access by apparmor anyway.
Also adjust virt-aa-helper to allow access to the
*.tunnelmigrate.dest.name files.
For more information, see https://launchpad.net/bugs/869553.
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Originaly, the code checked if another client is the queue and infered
ownership of the buck from that. Commit fa9595003d
added a separate variable to track the buck. That caused, that a new
call might enter claiming it has the buck, while another thread was
signalled to take the buck. This ends in two threads claiming they hold
the buck and entering poll(). This happens due to a race on waking up
threads on the client lock mutex.
This caused multi-threaded clients to hang, most prominently visible and
reproducible on python based clients, like virt-manager.
This patch causes threads, that have been signalled to take the buck to
re-check if buck is held by another thread.
This ought to fix the build if you have net/if.h but do
not have struct ifreq
* configure.ac: Check for struct ifreq in net/if.h
* src/util/virnetdev.c: Conditionalize to avoid use of
struct ifreq if it does not exist
probes.h can only be generated on Linux, and then only with dtrace
installed. If it is part of the tarball, then either 'make dist'
will fail if you don't have that setup, or we would have to start
keeping probes.h in libvirt.git. Since we only need it to be
generated when dtrace is in use, it's better to avoid shipping
it in the first place, and avoid tracking it in git.
Meanwhile, there is a build dependency - since the RPC code is
generated, it can be built early; but when dtrace is enabled, we
must ensure probes.h is built even earlier. Commit 1afcfbdd tried
to fix this, but did so in a way that added probes.h into the
tarball, and broke VPATH as well. Commit ecbca767 fixed VPATH,
but didn't fix the more fundamental problem. This patch solves
the issue by adding a dependency instead.
Tested with 'make dist' in a clean VPATH builds, for both
'./configure --without-dtrace' and './configure --with-dtrace';
all configurations were able to correctly build a tarball, and
the dtrace configuration no longer sticks probes.h in the tarball.
* src/Makefile.am (REMOTE_DRIVER_GENERATED): Don't ship probes.h;
rather, make it a dependency.
Fix a logic error, the initial value of ret = -1, if just set --config,
it will goto endjob directly without doing its really job here.
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
The glibc time.h header has an undocumented __isleap macro
that we are using. Since it is undocumented & does not appear
on any other OS, stop using it and just define the macro in
libvirt code instead.
* src/util/virtime.c: Remove __isleap usage
Only one IPv4 DHCP definition is supported. Originally the code checked
for a multiple definition and returned an error, but the new domain
definition was already added to networks. This patch moves the check
before the newly defined network is added to active networks.
*src/network/bridge_driver.c: networkDefine(): - move multiple IPv4
addresses check before
definition is used.
Detected by Coverity. Leak introduced in commit c1df2c1.
Two bugs here:
1. memory leak on successful parse
2. failure to parse still returned success
Signed-off-by: Alex Jia <ajia@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Detected by Coverity. Leak introduced in commit 8866eed.
Two bugs here:
1. logfd wasn't closed on all return paths
2. if we failed to mark a domain autodestroy, then the domain
was not made transient but we still returned success
Signed-off-by: Alex Jia <ajia@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Detected by Coverity. Leak introduced in commit 673adba.
Two separate bugs here:
1. call was not freed on all error paths
2. virCondDestroy was called even if virCondInit failed
Signed-off-by: Alex Jia <ajia@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
To add support for running libvirt on PowerPC, a CPU driver for the
PowerPC platform must be added.
Most generic cpu driver routines such as CPU compare, decode, etc
are based on CPUID comparison and are not relevant for non-x86
platforms.
Here, we introduce stubs for relevant PowerPC routines invoked by libvirt.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@au.ibm.com>
filter 0-device-weight when:
- getting blkio parameters with --config
- starting up a domain
When testing with blkio, I found these issues:
(dom is down)
virsh blkiotune dom --device-weights /dev/sda,300,/dev/sdb,500
virsh blkiotune dom --device-weights /dev/sda,300,/dev/sdb,0
virsh blkiotune dom
weight : 800
device_weight : /dev/sda,200,/dev/sdb,0
# issue 1: shows 0 device weight of /dev/sdb that may confuse user
(continued)
virsh start dom
# issue 2: If /dev/sdb doesn't exist, libvirt refuses to bring the
# dom up because it wants to set the device weight to 0 of a
# non-existing device. Since 0 means no weight-limit, we really don't
# have to set it.
Prior to this patch, for a running dom, the commands:
$ virsh blkiotune dom --device-weights /dev/sda,502,/dev/sdb,498
$ virsh blkiotune dom --device-weights /dev/sda,503
$ virsh blkiotune dom
weight : 500
device_weight : /dev/sda,503
claim that /dev/sdb no longer has a non-default weight, but
directly querying cgroups says otherwise:
$ cat /cgroup/blkio/libvirt/qemu/dom/blkio.weight_device
8:0 503
8:16 498
After this patch, an explicit 0 is required to remove a device path
from the XML, and omitting a device path that was previously
specified leaves that device path untouched in the XML, to match
cgroups behavior.
* src/qemu/qemu_driver.c (parseBlkioWeightDeviceStr): Rename...
(qemuDomainParseDeviceWeightStr): ...and use correct type.
(qemuDomainSetBlkioParameters): After parsing string, modify
rather than replacing existing table.
* tools/virsh.pod (blkiotune): Tweak wording.
The next patch will make it possible to have virDomainSetBlkioParameters
leave device weights unchanged if they are not mentioned in the incoming
string, but this only works if the list of block weights does not allow
duplicate paths. Technically, a user can still confuse libvirt by
passing alternate spellings that resolve to the same device, but it
is not worth worrying about working around that kind of abuse.
* src/conf/domain_conf.c (virDomainDefParseXML): Require unique
paths.
Implement the block I/O throttle setting and getting support to qemu
driver.
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Enable block I/O throttle for per-disk in XML, as the first
per-disk IO tuning parameter.
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Support Block I/O Throttle setting and query to remote driver.
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The virTimestamp and virTimeMs functions in src/util/util.h
duplicate functionality from virtime.h, in a non-async signal
safe manner. Remove them, and convert all code over to the new
APIs.
* src/util/util.c, src/util/util.h: Delete virTimeMs and virTimestamp
* src/lxc/lxc_driver.c, src/qemu/qemu_domain.c,
src/qemu/qemu_driver.c, src/qemu/qemu_migration.c,
src/qemu/qemu_process.c, src/util/event_poll.c: Convert to use
virtime APIs
The logging APIs need to be able to generate formatted timestamps
using only async signal safe functions. This rules out using
gmtime/localtime/malloc/gettimeday(!) and much more.
Introduce a new internal API which is async signal safe.
virTimeMillisNowRaw replacement for gettimeofday. Uses clock_gettime
where available, otherwise falls back to the unsafe
gettimeofday
virTimeFieldsNowRaw replacements for gmtime(), convert a timestamp
virTimeFieldsThenRaw into a broken out set of fields. No localtime()
replacement is provided, because converting to
local time is not practical with only async signal
safe APIs.
virTimeStringNowRaw replacements for strftime() which print a timestamp
virTimeStringThenRaw into a string, using a pre-determined format, with
a fixed size buffer (VIR_TIME_STRING_BUFLEN)
For each of these there is also a version without the Raw postfix
which raises a full libvirt error. These versions are not async
signal safe
* src/Makefile.am, src/util/virtime.c, src/util/virtime.h: New files
* src/libvirt_private.syms: New APis
* configure.ac: Check for clock_gettime in -lrt
* tests/virtimetest.c, tests/Makefile.am: Test new APIs
Fix the build on Mingw32 by removing the now obsolete
virGetPMCapabilities symbol from the private exports file
* src/libvirt_private.syms: Remove virGetPMCapabilities
If suspend failed for some reason (e.g. too short duration) then
subsequent attempts to trigger suspend were rejected because we
had already marked a suspend as being in progress
* src/util/virnodesuspend.c: Don't mark suspend as active
until we've successfully triggered it
The command name for the suspend action does not need to be
strdup'd. The constant string can be used directly. This
also means the code can be trivially rearranged to make the
switch clearer
* src/util/virnodesuspend.c: Remove strdup of cmdString
To avoid probing the host power management features on any
call to virInitialize, only initialize the mutex in
virNodeSuspendInit. Do lazy load of the supported PM target
mask when it is actually needed
* src/util/virnodesuspend.c: Lazy init of supported features
If we ensure that virNodeSuspendGetTargetMask always resets
*bitmask to zero upon failure, there is no need for the
powerMgmt_valid field.
* src/util/virnodesuspend.c: Ensure *bitmask is zero upon
failure
* src/conf/capabilities.c, src/conf/capabilities.h: Remove
powerMgmt_valid field
* src/qemu/qemu_capabilities.c: Remove powerMgmt_valid
The node suspend capabilities APIs should not have been put into
util.[ch]. Instead move them into virnodesuspend.[ch]
* src/util/util.c, src/util/util.h: Remove suspend capabilities APIs
* src/util/virnodesuspend.c, src/util/virnodesuspend.h: Add
suspend capabilities APIs
* src/qemu/qemu_capabilities.c: Include virnodesuspend.h
Rename virGetPMCapabilities to virNodeSuspendGetTargetMask and
virDiscoverHostPMFeature to virNodeSuspendSupportsTarget.
* src/util/util.c, src/util/util.h: Rename APIs
* src/qemu/qemu_capabilities.c, src/util/virnodesuspend.c: Adjust
for new names
Since virDiscoverHostPMFeature is just checking one feature,
there is no reason for it to return a bitmask. Change it to
return a boolean
* src/util/util.c, src/util/util.h: Make virDiscoverHostPMFeature
return a boolean
The virHostPMCapability enum helper was declared in util.h
but implemented in capabilities.c, which is in a completely
separate library at link time. Move the declaration into the
capabilities.c file and rename it to match normal conventions
* src/util/util.h: Remove virHostPMCapability enum decl
* src/conf/capabilities.c: Add virCapsHostPMTarget enum
The capabilities XML uses the x86 specific terms 'S3', 'S4'
and 'Hybrid-Syspend'. Switch it to use the same terminology
as the API constants and virsh options, eg 'suspend_mem'
'suspend_disk' and 'suspend_hybrid'
* docs/formatcaps.html.in, docs/schemas/capability.rng,
src/conf/capabilities.c: Rename suspend constants
The internal virHostPMCapability enum just duplicates the
public virNodeSuspendTarget enum, but with different names.
* src/util/util.c: Use VIR_NODE_SUSPEND_TARGET constants
* src/util/util.h: Remove virHostPMCapability enum
* src/conf/capabilities.c: Use VIR_NODE_SUSPEND_TARGET_LAST
The VIR_NODE_SUSPEND_TARGET constants are not flags, so they
should just be assigned straightforward incrementing values.
* include/libvirt/libvirt.h.in: Change VIR_NODE_SUSPEND_TARGET
values
* src/util/virnodesuspend.c: Fix suspend target checks
Detected by Coverity. the only case is caller passes a NULL to 'format' variable,
then taking 'if (format)' false branch, the function qcow2GetBackingStoreFormat
will directly dereferences the NULL 'format' pointer variable.
Signed-off-by: Alex Jia <ajia@redhat.com>
This patch add new pulic API virDomainSetBlockIoTune and
virDomainGetBlockIoTune.
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This adds per-device weights to <blkiotune>. Note that the
cgroups implementation only supports weights per block device,
and not per-file within the device; hence this option must be
global to the domain definition rather than tied to individual
<devices>/<disk> entries:
<domain ...>
<blkiotune>
<device>
<path>/path/to/block</path>
<weight>1000</weight>
</device>
</blkiotune>
..
This patch also adds a parameter --device-weights to virsh command
blkiotune for setting/getting blkiotune.weight_device for any
hypervisor that supports it. All <device> entries under
<blkiotune> are concatenated into a single string attribute under
virDomain{Get,Set}BlkioParameters, named "device_weight".
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Without this, 'virsh blkiotune --live --config --weight=n'
only affected live.
* src/qemu/qemu_driver.c (qemuDomainSetBlkioParameters): Allow
setting both configurations at once.
After the previous patch, there are now some redundant checks.
* src/qemu/qemu_driver.c (qemudDomainGetVcpuPinInfo)
(qemuGetSchedulerParametersFlags): Drop checks now guaranteed by
libvirt.c.
* src/lxc/lxc_driver.c (lxcGetSchedulerParametersFlags):
Likewise.
Drivers were inconsistent when presented both --live and --config
at once. For example, within qemu, getting memory parameters
favored live, getting blkio tuning favored config, and getting
scheduler parameters errored out. Also, some, but not all,
attempts to mix flags on query were filtered at the virsh level.
We shouldn't have to duplicate efforts in every client app, nor
in every driver. So, it is simpler to just enforce that the two
flags cannot both be used at once on query operations, which has
precedent in libvirt.c, and which matches the documentation of
virDomainModificationImpact.
* src/libvirt.c (virDomainGetMemoryParameters)
(virDomainGetBlkioParameters)
(virDomainGetSchedulerParametersFlags, virDomainGetVcpuPinInfo):
Borrow sanity checking from virDomainGetVcpusFlags.
It requires the domain is running, otherwise fails. Resize to a lower
size is supported, but should be used with extreme caution.
In order to prohibit the "size" overflowing after multiplied by
1024. We do checking in the codes. For QMP mode, the default units
is Bytes, the passed size needs to be multiplied by 1024, however,
for HMP mode, the default units is "Megabytes", the passed "size"
needs to be divided by 1024 then.
Implements functions for both HMP and QMP mode.
For HMP mode, qemu uses "M" as the units by default, so the passed "sized"
is divided by 1024.
For QMP mode, qemu uses "Bytes" as the units by default, the passed "sized"
is multiplied by 1024.
All of the monitor functions return -1 on failure, 0 on success, or -2 if
not supported.
The new API is named as "virDomainBlockResize", intending to add
support for qemu monitor command "block_resize" (both HMP and QMP).
Similar with APIs like "virDomainSetMemoryFlags", the units for
argument "size" is kilobytes.
Add the core functions that implement the functionality of the API.
Suspend is done by using an asynchronous mechanism so that we can return
the status to the caller before the host gets suspended. This asynchronous
operation is achieved by suspending the host in a separate thread of
execution. However, returning the status to the caller is only best-effort,
but not guaranteed.
To resume the host, an RTC alarm is set up (based on how long we want to
suspend) before suspending the host. When this alarm fires, the host
gets woken up.
Suspend-to-RAM operation on a host running Linux can take upto more than 20
seconds, depending on the load of the system. (Freezing of tasks, an operation
preceding any suspend operation, is given up after a 20 second timeout).
And Suspend-to-Disk can take even more time, considering the time required
for compaction, creating the memory image and writing it to disk etc.
So, we do not allow the user to specify a suspend duration of less than 60
seconds, to be on the safer side, since we don't want to prematurely declare
failure when we only had to wait for some more time.
Some systems support a feature known as 'Hybrid-Suspend', apart from the
usual system-wide sleep states such as Suspend-to-RAM (S3) or Suspend-to-Disk
(S4). Add the functionality to discover this power management feature and
export it in the capabilities XML under the <power_management> tag.
When another thread was dispatching while we wanted to send a
non-blocking call, we correctly queued the call and woke up the thread
but the thread just threw the call away since it forgot to recheck if
its socket was writable.
When spawning an ssh connection, the environment variables
DISPLAY, SSH_ASKPASS, ... are passed. However XAUTHORITY,
which is necessary if the .Xauthority is in a non default
place, was not passed.
Signed-off-by: Christian Franke <nobody@nowhere.ws>
virt-xml-validate fails when run on a domain XML file of type 'vbox'.
For failing test case, see https://bugzilla.redhat.com/show_bug.cgi?id=757097
This patch updates the XML schema to accept all valid hypervisor
types, as well as dropping hypervisor types that are not in use
by the current code base.
Signed-off-by: Eric Blake <eblake@redhat.com>
To make lxcSetContainerResources smaller, pull the mem tune
and device ACL setup code out into separate methods
* src/lxc/lxc_controller.c: Introduce lxcSetContainerMemTune
and lxcSetContainerDeviceACL
While LXC does not have the concept of VCPUS, so we can't do
per-VCPU pCPU placement, we can support the VM level CPU
placement. Todo this simply set the CPU affinity of the LXC
controller at startup. All child processes will inherit this
affinity.
* src/lxc/lxc_controller.c: Set process affinity
This partly reverts my previous patch f88de3eb. We need to
get file status after open, as given path could have been symlink,
so fstat() will operate on different file than lstat().
When aligning you need to clear the bits in the mask and leave the
others aside. Likely this code has never run, and will never run.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
One of my latest patches 2e37bf42d2
copy serial console definition. On domain shutdown we save this
info into state XML. However, later on the daemon start we simply
drop this info and since we are not re-reading qemu log,
vm->def->consoles[0] does not get populated with copy. Therefore
we need to avoid dropping console definition if it is just alias
for serial console.
If a connection to destination host is lost during peer-to-peer
migration (because keepalive protocol timed out), we won't be able to
finish the migration and it doesn't make sense to wait for qemu to
transmit all data. This patch automatically cancels such migration
without waiting for virDomainAbortJob to be called.
This API can be used to check if the socket associated with
virConnectPtr is still open or it was closed (probably because keepalive
protocol timed out). If there the connection is local (i.e., no socket
is associated with the connection, it is trivially always alive.
virConnectSetKeepAlive public API can be used by a client connecting to
remote server to start using keepalive protocol. The API is handled
directly by remote driver and not transmitted over the wire to the
server.
The keepalive program has two procedures: PING, and PONG.
Both are used only in asynchronous messages and the sender doesn't wait
for any reply. However, the party which receives PING messages is
supposed to react by sending PONG message the other party, but no
explicit binding between PING and PONG messages is made. For backward
compatibility neither server nor client are allowed to send keepalive
messages before checking that remote party supports them.
When virNetClientIOEventLoop is called for a non-blocking call and not
even a single byte can be sent from this call without blocking, we
properly reported that to the caller which properly frees the call. But
we never removed the call from a call queue.
If something fails while initializing qemu job object in
qemuDomainObjPrivateAlloc(), memory to the private pointer is freed, but
after that, the pointer is still dereferenced, which may result in a
segfault.
* qemuDomainObjPrivateAlloc() - Don't dereference NULL pointer.
Generally, functions which return malloc'd strings should be typed
as 'char *', not 'const char *', to make it obvious that the caller
is responsible to free things. free(const char *) fails to compile,
and although we have a cast embedded in VIR_FREE to work around poor
code that frees const char *, it's better to not rely on that hack.
* src/qemu/qemu_driver.c (qemuDiskPathToAlias): Change return type.
(qemuDomainBlockJobImpl): Update caller.
Given that we can now handle the target's disk shorthand, in addition
to an absolute path to the file or block device used on the host,
the term 'disk' fits a bit better as the parameter name than 'path'.
* include/libvirt/libvirt.h.in: Update some parameter names.
* src/libvirt.c (virDomainBlockStats, virDomainBlockStatsFlags)
(virDomainBlockPeek, virDomainGetBlockInfo, virDomainBlockJobAbort)
(virDomainGetBlockJobInfo, virDomainBlockJobSetSpeed)
(virDomainBlockPull): Likewise.
Commit 89b6284f made it possible to pass either a source name or
the target device to most API demanding a disk designation, but
forgot to update the documentation. It also failed to update
virDomainBlockStats to take both forms. This patch fixes both the
documentation and the remaining function.
Xen continues to use just device shorthand (that is, I did not
implement path lookup there, since xen does not track a domain_conf
to quickly tie a path back to the device shorthand).
* src/libvirt.c (virDomainBlockStats, virDomainBlockStatsFlags)
(virDomainGetBlockInfo, virDomainBlockPeek)
(virDomainBlockJobAbort, virDomainGetBlockJobInfo)
(virDomainBlockJobSetSpeed, virDomainBlockPull): Document
acceptable disk naming conventions.
* src/qemu/qemu_driver.c (qemuDomainBlockStats)
(qemuDomainBlockStatsFlags): Allow lookup by source name.
* src/test/test_driver.c (testDomainBlockStats): Likewise.
