The -audiodev argument is replacing the QEMU_AUDIO_DRV env variable (and
its relations).
Sadly we still have to use the SDL_AUDIODRIVER env variable because that
wasn't mapped into QAPI schema.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable
- VNC - set to "none", unless passthrough of host env variable is set
- SPICE - always set to "spice"
- SDL - always passthrough host env
- No graphics - set to "none", unless passthrough of host env variable is set
The setting of the QEMU_AUDIO_DRV env variable is done in the code which
configures graphics.
If no <audio> element is present, we now auto-populate <audio> elements
to reflect this historical default config. This avoids need to set audio
env when processing graphics.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the QEMU driver secretly sets the QEMU_AUDIO_DRV env variable
depending on how <graphics> are configured.
This introduces support for configuring audio backends from the <audio>
elements in the XML config.
The existing default behaviour is now only used if no <audio> element is
present.
All except the 'jack' audio driver are supported via QEMU's old env
variable config.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The check for ICH6 || ICH9 is repeated in many places in the code. The
new virDomainSoundModelSupportsCodecs() method provides a helper to
standardize this check.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
qemuProcessLaunch() is the correct place to set process limits,
and in fact is where we were dealing with almost all of them,
but the memory locking limit was handled in
qemuBuildCommandLine() instead for some reason.
The code is rewritten so that the desired limit is calculated
and applied in separated steps, which will help with further
changes, but this doesn't alter the behavior.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This allows the VNC client user to perform a shutdown, reboot and reset
of the VM from the host side.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The parent array takes ownership of the inserted value once all checks
pass. Don't make the callers second-guess when that happens and modify
the function to take a double pointer so that it can be cleared once the
ownership is taken.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The preferred syntax for boolean options is to set the value "on" or
"off". QEMU 7.1.0 will deprecate the short format we currently use.
The long format has been supported with -vnc since the change to use
QemuOpts in 2.2.0, so we check based on the new capability flag.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The preferred syntax for boolean options is to set the value "on" or
"off". QEMU 7.1.0 will deprecate the short format we currently use.
The long format has been supported with -spice since at least 1.5.3,
so we don't need to check for it.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The preferred syntax for boolean options is to set the value "on" or
"off". QEMU 7.1.0 will deprecate the short format we currently use.
The long format has been supported with -chardev since at least 1.5.3,
so we don't need to check for it.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To make it easier to split out the parsing/formatting of the <teaming>
element into separate functions (so we can more easily add the
<teaming> element to <hostdev>, change its virDomainNetDef so that it
points to a virDomainNetTeamingInfo rather than containing one.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Starting a VM with swtpm device fails with qemu-system-aarch64.
E.g. with TPM device config
<tpm model='tpm-tis'>
<backend type='emulator' version='2.0'/>
</tpm>
QEMU reports the following error
error: internal error: process exited while connecting to monitor:
2021-02-07T05:15:35.378927Z qemu-system-aarch64: -device
tpm-tis,tpmdev=tpm-tpm0,id=tpm0: 'tpm-tis' is not a valid device model name
Indeed the TPM device name is 'tpm-tis-device' [1][2] for aarch64,
versus the shorter 'tpm-tis' for x86. The devices are the same from
a functional POV, i.e. they both emulate a TPM device conforming to
the TIS specification. Account for the unfortunate name difference
when building the TPM device option in qemuBuildTPMDevStr(). Also
include a test case for 'tpm-tis-device'.
[1] https://qemu.readthedocs.io/en/latest/specs/tpm.html
[2] c294ac327c
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The conversion removes the use of virStringListAdd/virStringListRemove
which try to add dynamic properties to a string list which is really
inefficient.
Storing the dbus VMState ids in a GSList is pretty straightforward and
the slightly increased complexity of the code will be paid back by
removing the string list helpers later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In commit 88957116c9d3cb4705380c3702c9d4315fb500bb I've adapted
libvirt to QEMU's deprecation of -mem-path and -mem-prealloc and
switched to memory-backend-* even for system memory. My claim was
that that's what QEMU does under the hood anyway. And indeed it
was: see QEMU commit 900c0ba373aada4c13d47d95330aa72ec4067ba5 and
look at function create_default_memdev().
However, then commit d96c4d5f193e0e45beec80a6277728b32875bddb was
merged into QEMU. While it was fixing a bug, it also changed the
create_default_memdev() function in which it started turning off
use of canonical path (by setting
"x-use-canonical-path-for-ramblock-id" attribute to false). This
wasn't documented until QEMU commit
8db0b20415c129cf5e577a593a4a0372d90b7cc9. The path affects
migration - the same path has to be used on the source and on the
destination. Therefore, if there is old guest started with '-m X'
it has "pc.ram" block which doesn't use canonical path and thus
when migrating to newer QEMU which uses memory-backend-* we have
to turn off the canonical path explicitly. Otherwise,
"/objects/pc.ram" path would be expected by QEMU which doesn't
match the source.
Ideally, we would need to set it only for some machine types
(4.0 and older) because newer machine types already do what we
are doing. However, we treat machine types as opaque strings and
therefore we don't want to parse nor inspect their versions. But
then again, newer machine types already do what we are doing in
this commit, so when old machine types are deprecated and removed
we can remove our hack and forget it ever happened.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1912201
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The "max" model can be treated the same way as "host" model in general.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For hardware virtualization this is functionally identical to the
existing host-passthrough mode so the same caveats apply.
For emulated guest this exposes the maximum featureset supported by
the emulator. Note that despite being emulated this is not guaranteed
to be migration safe, especially if different emulator software versions
are used on each host.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Implements QEMU support for vhost-user-blk together with live
hotplug/unplug.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In this instance attempting to be correct is really pointless since the
secret is formatted into another string which is not erased securely and
then put on the commandline.
Keep the secure handling for correctness.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Pass the parameter clock rt to qemu to ensure that the
virtual machine is not synchronized with the host time
Signed-off-by: gongwei <gongwei@smartx.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Wire up the QEMU command line for this option.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add virtio related options iommu, ats and packed as driver element attributes
to vsock devices. Ex:
<vsock model='virtio'>
<cid auto='no' address='3'/>
<driver iommu='on'/>
</vsock>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The code handles XML bits and internal definition and should be
in conf directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The _virDomainMemoryDef structure has @uuid member which is
needed for PPC64 guests. No other architectures use it. Since the
member is VIR_UUID_BUFLEN bytes long, the structure is
unnecessary big. If the member is just a pointer then we can also
replace some calls of virUUIDIsValid() with plain test against
NULL and also simplify formatter code which can now also check
the pointer against NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now we have everything prepared for generating the command line.
The device alias prefix was chosen to be 'virtiopmem'.
Since virtio-pmem-pci device goes onto PCI bus generating device
alias must have been changed slightly because
qemuAssignDeviceMemoryAlias() might have used DIMM slot number to
generate the alias. This obviously won't work and thus the "old"
way (which includes qemuDomainDeviceAliasIndex()) must be used.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1735375
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The virtio-pmem is a virtio variant of NVDIMM and just like
NVDIMM virtio-pmem also allows accessing host pages bypassing
guest page cache. The difference is that if a regular file is
used to back guest's NVDIMM (model='nvdimm') the persistence of
guest writes might not be guaranteed while with virtio-pmem it
is.
To express this new model at domain XML level, I've chosen the
following:
<memory model='virtio-pmem' access='shared'>
<source>
<path>/tmp/virtio_pmem</path>
</source>
<target>
<size unit='KiB'>524288</size>
</target>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</memory>
Another difference between NVDIMM and virtio-pmem is that while
the former supports NUMA node locality the latter doesn't. And
also, the latter goes onto PCI bus and not into a DIMM module.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
managed='no' on an <interface> allows an unprivileged libvirt to use a
pre-created tap/macvtap device that libvirt has permission to
open/read/write, but no permission to modify (i.e. set the MTU or MAC
address). But when the XML had an <mtu size='blah'/> setting (which
was put there in order to tell the *guest* OS what MTU to set for the
emulated device at the other end of the tap) we were attempting to set
the MTU of the tap device on the host, paying no attention to the
setting of 'managed'. That would of course end in failure.
This patch only sets the MTU if managed='no' is *not* set (so, if it
is 'yes', or just not set at all).
Note that MTU of the tap is also set when connecting the tap to a
bridge device, but managed='no' is only allowed for <interface
type='ethernet'>, which would never attach to a bridge anyway, so we
don't need the check there.
Resolves: https://bugzilla.redhat.com/1905929
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The monitor code uses 'flags' for the flags of the monitor builder,
while in this function it's a different set of flags. All callers pass a
variable named 'cdevflags', so rename the argument to suit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While the code that's setting default qdisc is clever enough to
not overwrite any bandwidth (potentially) set by
virNetDevBandwidthSet() (and thus the root qdisc htb is not
replaced with noqueue), it does print a debug message when that's
the case. It's needless. We can set the root qdisc beforehand and
let virNetDevBandwidthSet() overwrite it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Currently, we configure QEMU to prealloc memory almost by
default. Well, by default for NVDIMMs, hugepages and if user
asked us to (via memoryBacking <allocation mode="immediate"/>).
However, when guest's NVDIMM is backed by real life NVDIMM this
approach is not the best. In this case users should put <pmem/>
into the <memory/> device <source/>, like this:
<memory model='nvdimm' access='shared'>
<source>
<path>/dev/pmem0</path>
<pmem/>
</source>
</memory>
Instructing QEMU to do prealloc in this case means that each
page of the NVDIMM is "touched" (the first byte is read and
written back - see QEMU commit v2.9.0-rc1~26^2) which cripples
device wear.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1894053
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Although the function currently only returns errors for PCI addresses,
check it here too, in case that changes in the future.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
So far our memory modules could go only into DIMM slots. But with
virtio model this assumption is no longer true - virtio-pmem goes
onto PCI bus. But for formatting PCI address onto command line we
already have a function - qemuBuildDeviceAddressStr(). Therefore,
mode DIMM address generation into it so that we don't have to
special case address building later on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Han Han <hhan@redhat.com>
The virDomainMemoryModel structure has a @type member which is
really type of virDomainMemoryModel but we store it as int
because the virDomainMemoryModelTypeFromString() call stores its
retval right into it. Then, to have compiler do compile time
check for us, every switch() typecasts the @type. This is
needlessly verbose because the parses already has @val - a
variable to store temporary values. Switch @type in the struct to
virDomainMemoryModel and drop all typecasts.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Han Han <hhan@redhat.com>
qemuBuildCommandLine() is calling qemuDomainAlignMemorySizes(),
which is an operation that changes live XML and domain and has
little to do with the command line build process.
Move it to qemuProcessPrepareDomain() where we're supposed to
make live XML and domain changes before launch. qemuProcessStart()
is setting VIR_QEMU_PROCESS_START_NEW if !migrate && !snapshot,
same conditions used in qemuBuildCommandLine() to call
qemuDomainAlignMemorySizes(), making this change seamless.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Do not look up the index of the passed FD in places where
we already have it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
An alternative to qemuVirCommandGetFDSet that takes the index
into the passed FD set as an argument and does not try to look it up.
Use it as well ass virCommandPassFDIndex in qemuBuildChrChardevFileStr
and qemuBuildInterfaceCommandLine.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The ESP SCSI controllers (NCR53C90, DC390, AM53C974) have the same
requirement as the LSI Logic controller for each disk to be set via
the scsi-id=NNN property, not the lun=NNN property.
Switching the code to use an enum will force authors to pay attention
to this difference when adding future SCSI controllers.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The NCR53C90 is the built-in SCSI controller on all sparc machine types,
but not sparc64. Note that it has the fixed alias "scsi", which differs
from our normal naming convention of "scsi0".
The DC390 and AM53C974 are PCI SCSI controllers that can be added to any
PCI machine.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The NCR53C90 is the built-in SCSI controller on all sparc machine types,
and some mips and m68k machine types.
The DC390 and AM53C974 are PCI SCSI controllers that can be added to any
PCI machine.
These are only interesting for emulating obsolete hardware platforms.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU version 4.2 introduced a performance feature under commit
d645e13287 ("kvm: i386: halt poll control MSR support").
This patch adds a new KVM feature 'poll-control' to set this performance
hint for KVM guests. The feature is off by default.
To enable this hint and have libvirt add "-cpu host,kvm-poll-control=on"
to the QEMU command line, the following XML code needs to be added to the
guest's domain description:
<features>
<kvm>
<poll-control state='on'/>
</kvm>
</features>
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are two types of vhostuser ports:
dpdkvhostuser - OVS creates the socket and QEMU connects to it
dpdkvhostuserclient - QEMU creates the socket and OVS connects to it
But of course ovs-vsctl syntax for fetching ifname is different.
So far, we've implemented the former. The lack of implementation
for the latter means that we are not detecting the interface name
and thus not reporting it in domain XML, or failing to get
interface statistics.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1767013
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Although the code in qemuProcessStartValidateTSC works as if the
timer frequency was already unsigned long long (by using an appropriate
temporary variable), the virDomainTimerDef structure actually defines
frequency as unsigned long, which is not guaranteed to be 64b.
Fixes support for frequencies higher than 2^32 - 1 on 32b systems.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add logic to validate and then pass through 'fmode' and 'dmode' to the
QEMU call.
Signed-off-by: Brian Turek <brian.turek@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Coverity reported a potential resource leak. While it's probably not
a real-world scenario, the code could technically jump to cleanup
between the time that vdpafd is opened and when it is used. Ensure that
it gets cleaned up in that case.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Use of the -enable-fips option is being deprecated in QEMU >= 5.2.0. If
FIPS compliance is required, QEMU must be built with libcrypt which will
unconditionally enforce it.
Thus there is no need for libvirt to pass -enable-fips to modern QEMU.
Unfortunately there was never any way to probe for -enable-fips in the
first instance, it was enabled by libvirt based on version number
originally, and then later unconditionally enabled when libvirt dropped
support for older QEMU. Similarly we now use a version number check to
decide when to stop passing -enable-fips.
Note that the qemu-5.2 capabilities are currently from the pre-release
version and will be updated once qemu-5.2 is released.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Enable <interface type='vdpa'> for qemu domains. This provides basic
support and does not support hotplug or migration.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
