Commit Graph

36 Commits

Author SHA1 Message Date
Andrea Bolognani
4ceac4bf29 tests: Rename VIRT_TEST_* macros to VIR_TEST_*
We use the "vir" prefix pretty consistently in our
APIs, both external and internal, which made these
macros stood out.
2017-04-04 17:30:03 +02:00
Laine Stump
98fa8f3ef6 conf: support host-side IP/route information in <interface>
This is place as a sub-element of <source>, where other aspects of the
host-side connection to the network device are located (network or
bridge name, udp listen port, etc). It's a bit odd that the interface
we're configuring with this info is itself named in <target dev='x'/>,
but that ship sailed long ago:

    <interface type='ethernet'>
      <mac address='00:16:3e:0f:ef:8a'/>
      <source>
        <ip address='192.168.122.12' family='ipv4'
            prefix='24' peer='192.168.122.1'/>
        <ip address='192.168.122.13' family='ipv4' prefix='24'/>
        <route family='ipv4' address='0.0.0.0'
               gateway='192.168.122.1'/>
        <route family='ipv4' address='192.168.124.0' prefix='24'
               gateway='192.168.124.1'/>
      </source>
    </interface>

In practice, this will likely only be useful for type='ethernet', so
its presence in any other type of interface is currently forbidden in
the generic device Validate function (but it's been put into the
general population of virDomainNetDef rather than the
ethernet-specific union member so that 1) we can more easily add the
capability to other types if needed, and 2) we can retain the info
when set to an invalid interface type all the way through to
validation and report a proper error, rather than just ignoring it
(which is currently what happens for many other type-specific
settings).

(NB: The already-existing configuration of IP info for the guest-side
of interfaces is in subelements directly under <interface>, and the
name of the guest-side interface (when configurable) is in <guest
dev='x'/>).

(This patch had been pushed earlier in
commit fe6a77898a, but was reverted in
commit d658456530 because it had been
accidentally pushed during the freeze for release 2.0.0)
2016-07-01 21:13:30 -04:00
Ján Tomko
d658456530 Revert "conf: support host-side IP/route information in <interface>"
This reverts commit fe6a77898a.

This feature was accidentally pushed in the feature freeze.
2016-06-27 12:54:55 +02:00
Laine Stump
fe6a77898a conf: support host-side IP/route information in <interface>
This is place as a sub-element of <source>, where other aspects of the
host-side connection to the network device are located (network or
bridge name, udp listen port, etc). It's a bit odd that the interface
we're configuring with this info is itself named in <target dev='x'/>,
but that ship sailed long ago:

    <interface type='ethernet'>
      <mac address='00:16:3e:0f:ef:8a'/>
      <source>
        <ip address='192.168.122.12' family='ipv4'
            prefix='24' peer='192.168.122.1'/>
        <ip address='192.168.122.13' family='ipv4' prefix='24'/>
        <route family='ipv4' address='0.0.0.0'
               gateway='192.168.122.1'/>
        <route family='ipv4' address='192.168.124.0' prefix='24'
               gateway='192.168.124.1'/>
      </source>
    </interface>

In practice, this will likely only be useful for type='ethernet', so
its presence in any other type of interface is currently forbidden in
the generic device Validate function (but it's been put into the
general population of virDomainNetDef rather than the
ethernet-specific union member so that 1) we can more easily add the
capability to other types, and 2) we can retain the info when set to
an invalid interface type all the way through to validation and report
a proper error, rather than just ignoring it (which is currently what
happens for many other type-specific settings).

(NB: The already-existing configuration of IP info for the guest-side
of interfaces is in subelements directly under <interface>, and the
name of the guest-side interface (when configurable) is in <guest
dev='x'/>).
2016-06-26 19:33:10 -04:00
Tomáš Ryšavý
cd7dd1508d tests: Rename virtTestRun to virTestRun.
This function doesn't follow our convention of naming functions.
2016-06-08 11:23:12 -04:00
Laine Stump
002b7704ff lxc: support <interface type='ethernet'>
This is identical to type='bridge', but without the "connect to a
bridge" part, so it can be handled by using the same functions (and
often even the same cases in switch statements), after renaming
virLXCProcessSetupInterfaceBridged() to virLXCProcessInterfaceTap()
and enhancing it to skip bridge-related items when brname == NULL.

To be truly useful, we need to support setting the ip address on the
host side veth as well as guest side veth (already supported for
type='bridge'), as well as setting the peer address for both.

The <script> element (supported by type='ethernet' in qemu) isn't
supported in this patch. An error is logged at domain start time if it
is encountered. This may be changed in a later patch.
2016-05-24 15:21:05 -04:00
Cole Robinson
c493d21642 tests: Enable failure testing with CompareDomXML2XML
This allows tests to check for specific failure scenarios
2016-04-14 12:25:57 -04:00
Ján Tomko
2d40e2da7b tests: add a test for persistent LXC XML parsing
Check if we correctly parse the persistent config even with
the VIR_DOMAIN_DEF_PARSE_SKIP_OSTYPE_CHECKS flag.
2016-02-26 09:47:45 +01:00
Ján Tomko
1d6dcec080 testCompareDomXML2XMLFiles: add parseFlags parameter
Allow testing XML parsing with different flags.
2016-02-26 09:47:45 +01:00
Cole Robinson
8e0fd243f8 tests: utils: Add PreFormat callback for CompareXML2XML helper
This allows individual driver tests to hook in their own code before
the def is formatted and compared.

We will eventually use this in the qemuxml2xml
2016-02-09 16:09:01 -05:00
Cole Robinson
5770c17074 tests: Share domain XML2XML compare helper
This creates a shared function in testutils.c that consolidates all
the slightly different implementations.
2016-01-08 21:21:34 -05:00
ik.nitk
c27553b6e2 lxc: Inherit namespace feature
This patch adds feature for lxc containers to inherit namespaces.
This is very similar to what lxc-tools or docker provides.  Look
for "man lxc-start" and you will find that you can pass command
args as [ --share-[net|ipc|uts] name|pid ]. Or check out docker
networking option in which you can give --net=container:NAME_or_ID
as an option for sharing +namespace.

>From this patch you can add extra libvirt option to share
namespace in following way.

 <lxc:namespace>
   <lxc:sharenet type='netns' value='red'/>
   <lxc:shareipc type='pid' value='12345'/>
   <lxc:shareuts type='name' value='container1'/>
 </lxc:namespace>

The netns option is specific to sharenet. It can be used to
inherit from existing network namespace.

Co-authored: Daniel P. Berrange <berrange@redhat.com>
2015-08-26 11:28:30 +01:00
Cole Robinson
ca32929908 tests: Add virtTestCompareToFile
Replaces a common pattern used in many test files
2015-04-23 17:08:48 -04:00
Cole Robinson
bdbe26b504 tests: Use *DefParseFile more 2015-04-23 17:08:48 -04:00
Cole Robinson
835cf84b7e domain: conf: Drop expectedVirtTypes
This needs to specified in way too many places for a simple validation
check. The ostype/arch/virttype validation checks later in
DomainDefParseXML should catch most of the cases that this was covering.
2015-04-20 16:43:43 -04:00
Daniel P. Berrange
0ecd685109 Give virDomainDef parser & formatter their own flags
The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.

This is seriously confusing & error prone for a number of
reasons:

 - VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
   VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
   formatting operation
 - Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
   to parse or to format, but not both.

This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.

The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
2015-01-13 16:26:12 +00:00
Cédric Bosdonnat
251d75a863 Domain config: write <features/> if some capabilities are set.
If all features are set to default (including the capabilities policy),
but some capabilities are toggled, we need to output the <features>
element when formatting the config.
2014-07-30 14:21:55 +02:00
Ján Tomko
2dcdb7f654 Indent top-level labels by one space in tests/ 2014-03-25 14:58:41 +01:00
Martin Kletzander
cc9c62fef9 Require spaces around equality comparisons
Commit a1cbe4b5 added a check for spaces around assignments and this
patch extends it to checks for spaces around '=='.  One exception is
virAssertCmpInt where comma after '==' is acceptable (since it is a
macro and '==' is its argument).

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-03-18 11:29:44 +01:00
Daniel P. Berrange
53a699a07b Exercise the ABI stability check code in test suite
Any test suite which involves a virDomainDefPtr should
call virDomainDefCheckABIStability with itself just as
a basic sanity check that the identity-comparison always
succeeds. This would have caught the recent NULL pointer
access crash.

Make sure we cope with def->name being NULL since the
VMWare config parser produces NULL names.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-01-10 20:32:48 +00:00
Eric Blake
dd0dda2e4a schema: fix idmap validation
When idmap was added to LXC, we forgot to cover it in the testsuite.
The schema was missing an <element> layer, and as a result,
virt-xml-validate was failing on valid dumpxml output.

Reported by Eduard - Gabriel Munteanu on IRC.

* docs/schemas/domaincommon.rng (idmap): Include <idmap> element,
and support interleaves.
* tests/lxcxml2xmldata/lxc-idmap.xml: New file.
* tests/lxcxml2xmltest.c (mymain): Test it.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-01-10 10:54:14 -07:00
Ján Tomko
eab51940bd Allow root directory in filesystem source dir schema
Use absDirPath instead of absFilePath.

https://bugzilla.redhat.com/show_bug.cgi?id=1028107
2013-11-07 18:43:15 +01:00
Ján Tomko
3f029fb531 LXC: Fix handling of RAM filesystem size units
Since 76b644c when the support for RAM filesystems was introduced,
libvirt accepted the following XML:
<source usage='1024' unit='KiB'/>

This was parsed correctly and internally stored in bytes, but it
was formatted as (with an extra 's'):
<source usage='1024' units='KiB'/>
When read again, this was treated as if the units were missing,
meaning libvirt was unable to parse its own XML correctly.

The usage attribute was documented as being in KiB, but it was not
scaled if the unit was missing. Transient domains still worked,
because this was balanced by an extra 'k' in the mount options.

This patch:
Changes the parser to use 'units' instead of 'unit', as the latter
was never documented (fixing persistent domains) and some programs
(libvirt-glib, libvirt-sandbox) already parse the 'units' attribute.

Removes the extra 'k' from the tmpfs mount options, which is needed
because now we parse our own XML correctly.

Changes the default input unit to KiB to match documentation, fixing:
https://bugzilla.redhat.com/show_bug.cgi?id=1015689
2013-10-09 17:44:45 +02:00
Daniel P. Berrange
eee6eb666c Remove test case average timing
The test case average timing code has not been used by any test
case ever. Delete it to remove complexity.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-10-08 12:39:30 +01:00
Daniel P. Berrange
3debed1bbd Don't clobber 'ret' in LXC XML test case
The testCompareXMLToXMLHelper method clobbered the 'ret' variable
in several places leading to a failure to report OOM errors from
the test suite.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-09-25 18:12:08 +01:00
Michal Privoznik
dc6f2dadac Introduce OOM reporting to virAsprintf
Actually, I'm turning this function into a macro as filename,
function name and line number needs to be passed. The new
function virAsprintfInternal is introduced with the extended set
of arguments.
2013-07-10 11:07:31 +02:00
Daniel P. Berrange
ada14b86cc Add support for storage format in FS <driver>
Extend the <driver> element in filesystem devices to
allow a storage format to be set. The new attribute
uses 'format' to reflect the storage format. This is
different from the <driver> element in disk devices
which use 'type' to reflect the storage format. This
is because the 'type' attribute on filesystem devices
is already used for the driver backend, for which the
disk devices use the 'name' attribute. Arggggh.

Anyway for disks we have

   <driver name="qemu" type="raw"/>

And for filesystems this change means we now have

   <driver type="loop" format="raw"/>

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-05-13 13:15:19 +01:00
Michal Privoznik
7c9a2d88cd virutil: Move string related functions to virstring.c
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
2013-05-02 16:56:55 +02:00
Osier Yang
2beae9c202 cleanup: Only include testutils.h once
No reason to include it in both "if" and "else" branches.
2013-04-17 15:41:04 +08:00
Peter Krempa
ad0d10b2b1 conf callback: Rearrange function parameters
Move the xmlopt and caps arguments to the end of the argument list.
2013-04-04 22:41:19 +02:00
Peter Krempa
e84b19316a maint: Rename xmlconf to xmlopt and virDomainXMLConfig to virDomainXMLOption
This patch is the result of running:

for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
  sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done

and a few manual tweaks.
2013-04-04 22:18:56 +02:00
Peter Krempa
27cf98e2d1 virCaps: conf: start splitting out irrelevat data
The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.

This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:

1) Get rid of the stuff from virCaps

2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.

This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.
2013-03-13 09:27:14 +01:00
Daniel P. Berrange
fed92f08db Turn virCapabilities into a virObject
To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-02-08 11:34:26 +00:00
Daniel P. Berrange
aae0fc2a92 Add support for <hostdev mode="capabilities">
The <hostdev> device type has long had a redundant "mode"
attribute, which has always been "subsys". This finally
introduces a new mode "capabilities", which will be used
by the LXC driver for device assignment. Since container
based virtualization uses a single kernel, the idea of
assigning physical PCI devices doesn't make sense. It is
still reasonable to assign USB devices, but for assigning
arbitrary nodes in /dev, the new 'capabilities' mode is
to be used.

The first capability support is 'storage', which is for
assignment of block devices. Functionally this is really
pretty similar to the <disk> support. The only difference
is the device node name is identical in both host and
container namespaces.

    <hostdev mode='capabilities' type='storage'>
      <source>
        <block>/dev/sdf1</block>
      </source>
    </hostdev>

The second capability support is 'misc', which is for
assignment of character devices. There is no existing
parallel to this. Again the device node is the same
inside & outside the container.

    <hostdev mode='capabilities' type='misc'>
      <source>
        <char>/dev/input/event3</char>
      </source>
    </hostdev>

The reason for keeping the char & storage devices
separate in the domain XML, is to mirror the split
in the node device XML. NB the node device XML does
not yet report character devices, but that's another
new patch to come

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-12-17 17:50:50 +00:00
Eric Blake
e8aa5a16c9 build: silence recent syntax check violations
An upstream gnulib bug[1] meant that some of our syntax checks
weren't being run.  Fix up our offenders before we upgrade to
a newer gnulib.

[1] https://lists.gnu.org/archive/html/bug-gnulib/2012-03/msg00194.html

* src/util/virnetdevtap.c (virNetDevTapCreate): Use flags.
* tests/lxcxml2xmltest.c (mymain): Strip useless ().
2012-03-29 21:23:59 -06:00
Daniel P. Berrange
c91cff255f Add support for setting init argv for LXC
Pass argv to the init binary of LXC, using a new <initarg> element.

* docs/formatdomain.html.in: Document <os> usage for containers
* docs/schemas/domaincommon.rng: Add <initarg> element
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and
  formatting of <initarg>
* src/lxc/lxc_container.c: Setup LXC argv
* tests/Makefile.am, tests/lxcxml2xmldata/lxc-systemd.xml,
  tests/lxcxml2xmltest.c, tests/testutilslxc.c,
  tests/testutilslxc.h: Test parsing/formatting of LXC related
  XML parts
2012-03-27 15:52:25 +01:00