A new type to track USB addresses.
Every <controller type='usb' index='i'/> is represented by an
object of type virDomainUSBAddressHub located at buses[i].
Each of these hubs has up to 'nports' ports.
If a port is occupied, it has the corresponding bit set in
the 'ports' bitmap, e.g. port 1 would have the 0th bit set.
If there is a hub on this port, then hubs[i] will point
to this hub.
Partially resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1301021
If the volume xml was looking to create a luks volume take the necessary
steps in order to make that happen.
The processing will be:
1. create a temporary file (virStorageBackendCreateQemuImgSecretPath)
1a. use the storage driver state dir path that uses the pool and
volume name as a base.
2. create a secret object (virStorageBackendCreateQemuImgSecretObject)
2a. use an alias combinding the volume name and "_luks0"
2b. add the file to the object
3. create/add luks options to the commandline (virQEMUBuildLuksOpts)
3a. at the very least a "key-secret=%s" using the secret object alias
3b. if found in the XML the various "cipher" and "ivgen" options
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation to tracking which USB addresses are occupied.
Introduce two helper functions for printing the port path
as a string and appending it to a virBuffer.
Currently many users of virConf APIs are defining the same
macros for calling virConfValue() and then doing type
checking. To remove this repeated code, add a set of
typesafe accessor methods.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Libxl is the last user and I don't have the toolchain prepared to
compile the libxl driver. Move it to the libxl driver to avoid having to
refactor the code.
Provide a separate method to free a logging filter object. This will come handy
once a method to create an individual logging filter object is introduced.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This is just a convenience method for discarding a list of outputs instead of
using a 'for' loop everywhere. It is safe to pass -1 as the number of elements
in the list as well as passing NULL as list reference.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Provide a separate method to free a logging output object. This will come handy
once a method to create an individual logging output object is introduced.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This patch takes the code out of
lxcContainerRenameAndEnableInterfaces() that adds all IP addresses and
IP routes to the interface, and puts it into a utility function
virNetDevIPInfoAddToDev() in virnetdevip.c so that it can be used by
anyone.
One small change in functionality -
lxcContainerRenameAndEnableInterfaces() previously would add all IP
addresses to the interface while it was still offline, then set the
interface online, and then add the routes. Because I don't want the
utility function to set the interface online, I've moved this up so
the interface is first set online, then IP addresses and routes are
added. This is the same order that the network service from
initscripts (in ifup-ether) does it, so it shouldn't pose any problem
(and hasn't, in the tests that I've run).
(This patch had been pushed earlier in commit
f1e0d0da11, but was reverted in commit
05eab47559 because it had been
accidentally pushed during the freeze for release 2.0.0)
A helper that will execute a callback on every USB device
in the domain definition.
With an ability to skip USB hubs, since we will want to treat
them differently in some cases.
This patch takes the code out of
lxcContainerRenameAndEnableInterfaces() that adds all IP addresses and
IP routes to the interface, and puts it into a utility function
virNetDevIPInfoAddToDev() in virnetdevip.c so that it can be used by
anyone.
One small change in functionality -
lxcContainerRenameAndEnableInterfaces() previously would add all IP
addresses to the interface while it was still offline, then set the
interface online, and then add the routes. Because I don't want the
utility function to set the interface online, I've moved this up so
the interface is first set online, then IP addresses and routes are
added. This is the same order that the network service from
initscripts (in ifup-ether) does it, so it shouldn't pose any problem
(and hasn't, in the tests that I've run).
There are currently two places in the domain where this combination is
used, and there is about to be another. This patch puts them together
for brevity and uniformity.
As with the newly-renamed virNetDevIPAddr and virNetDevIPRoute
objects, the new virNetDevIPInfo object will need to be accessed by a
utility function that calls low level Netlink functions (so we don't
want it to be in the conf directory) and will be called from multiple
hypervisor drivers (so it can't be in any hypervisor directory); the
most appropriate place is thus once again the util directory.
The parse and format functions are in conf/domain_conf.c because only
the domain XML (i.e. *not* the network XML) has this exact combination
of IP addresses plus routes. Note that virDomainNetIPInfoFormat() will
end up being the only caller to virDomainNetRoutesFormat() and
virDomainNetIPsFormat(), so it will just subsume those functions in a
later patch, but we can't do that until they are no longer called.
(It would have been nice to include the interface name within the
virNetDevIPInfo object (with a slight name change), but that can't
be done cleanly, because in each case the interface name is provided
in a different place in the XML relative to the routes and IP
addresses, so putting it in this object would actually make the code
more confused rather than simpler).
These functions all need to be called from a utility function that
must be located in the util directory, so we move them all into
util/virnetdevip.[ch] now that it exists.
Function and struct names were appropriately changed for the new
location, but all code is unchanged aside from motion and renaming.
This patch splits virnetdev.[ch] into multiple files, with the new
virnetdevip.[ch] containing all the functions related to setting and
retrieving IP-related info for a device (both addresses and routes).
I'm tired of mistyping this all the time, so let's do it the same all
the time (similar to how we changed all "Pci" to "PCI" awhile back).
(NB: I've left alone some things in the esx and vbox drivers because
I'm unable to compile them and they weren't obviously *not* a part of
some API. I also didn't change a couple of variables named,
e.g. "somethingIptables", because they were derived from the name of
the "iptables" command)
These had been declared in conf/device_conf.h, but then used in
util/virnetdev.c, meaning that we had to #include conf/device_conf.h
in virnetdev.c (which we have for a long time said shouldn't be done.
This caused a bigger problem when I tried to #include util/virnetdev.h
in a file in src/conf (which is allowed) - for some reason the
"device_conf.h: File not found" error.
The solution is to move the data types and functions used in util
sources from conf to util. Some names were adjusted during the move
("virInterface" --> "virNetDevIf", and "VIR_INTERFACE" -->
"VIR_NETDEV_IF")
virNetDevLinkDump should have been in virnetlink.c, but that file
didn't exist yet when the function was created. It didn't really
matter until now - I found that having virnetlink.h included by
virnetdev.h caused build problems when trying to #include virnetdev.h
in a .c file in src/conf (due to missing directory in -I). Rather than
fix that to further institutionalize the incorrect placement of this
one function, this patch moves the function.
The VIR_STORAGE_POOL_EVENT_REFRESHED constant does not
reflect any change in the lifecycle of the storage pool.
It should thus not be part of the storage pool lifecycle
event set, but rather be a top level event in its own
right. Thus we introduce VIR_STORAGE_POOL_EVENT_ID_REFRESH
to replace it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This kvmGetMaxVCPUs() needs to be used at two different places
so move it to utils with appropriate name and mark it as private
global now.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Move to virsecret.c and rename to virSecretLookupParseSecret. Also convert
to usage xmlNodePtr and virXMLPropString rather than virXPathString.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the enum into a new src/util/virsecret.h, rename it to be
virSecretLookupType. Add a src/util/virsecret.h in order to perform
a couple of simple operations on the secret XML and virSecretLookupTypeDef
for clearing and copying.
This includes quite a bit of collateral damage, but the goal is to remove
the "virStorage*" and replace with the virSecretLookupType so that it's
easier to to add new lookups that aren't necessarily storage pool related.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This will be used for the caller that needs to specify a separator.
Currently identical to virBitmapParse.
Also change one test case to use the new function.
Basically, there are just two functions introduced here:
virDomainRedirdevDefFind which looks up given redirdev in domain
definition, and virDomainRedirdevDefRemove which removes the
device at given index in the array of devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While we need to know the difference between the total memory stored in
<memory> and the actual size not included in the possible memory modules
we can't pre-calculate it reliably. This is due to the fact that
libvirt's XML is copied via formatting and parsing the XML and the
initial memory size can be reliably calculated only when certain
conditions are met due to backwards compatibility.
This patch removes the storage of 'initial_memory' and fixes the helpers
to recalculate the initial memory size all the time from the total
memory size. This conversion is possible when we also make sure that
memory hotplug accounts properly for the update of the total memory size
and thus the helpers for inserting and removing memory devices need to
be tweaked too.
This fixes a bug where a cold-plug and cold-remove of a memory device
would increase the size reported in <memory> in the XML by the size of
the memory device. This would happen as the persistent definition is
copied before attaching the device and this would lead to the loss of
data in 'initial_memory'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1344892
This option allows or disallows detection of zero-writes if it is set to
"on" or "off", respectively. It can be also set to "unmap" in which
case it will try discarding that part of image based on the value of the
"discard" option.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The virQEMUDriverConfig object contains lists of
loader:nvram pairs to advertise firmwares supported by
by the driver, and qemu_conf.c contains code to populate
the lists, all of which is useful for other drivers too.
To avoid code duplication, introduce a virFirmware object
to encapsulate firmware details and switch the qemu driver
to use it.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
In libxl driver we do virObjectRef in libxlDomainObjBeginJob,
If virCondWaitUntil failed, it goes to error, do virObjectUnref,
There's a chance that someone undefine the vm at the same time,
and refs unref to zero, vm is freed in libxlDomainObjBeginJob.
But the vm outside function is not Null, we do virObjectUnlock(vm).
That's how we overwrite the vm memory after it's freed. I fix it.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the 162efa1a commit the function was introduced, but the
commit forgot to update livirt_private.syms accordingly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In preparation for moving all the CPU related APIs out of
the nodeinfo file, give them a virHostCPU name prefix.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In preparation for moving all the memory related APIs out of
the nodeinfo file, give them a virHostMem name prefix.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virCPUData, virCPUx86Feature, and virCPUx86Model all contained a pointer
to virCPUx86Data, which was not very nice since the real CPUID data were
accessible by yet another pointer from virCPUx86Data. Moreover, using
virCPUx86Data directly will make static definitions of internal CPU
features a bit easier.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Since it will not be called from outside of conf we can unexport it too
if we move it to the appropriate place.
Test suite change is necessary since the error will be reported sooner
now.
Until now we weren't able to add checks that would reject configuration
once accepted by the parser. This patch adds a new callback and
infrastructure to add such checks. In this patch all the places where
rejecting a now-invalid configuration wouldn't be a good idea are marked
with a new parser flag.
Move the module from qemu_command.c to a new module virqemu.c and
rename the API to virQEMUBuildObjectCommandline.
This API will then be shareable with qemu-img and the need to build
a security object for luks support.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This function is not used anywhere. Moreover, the code that would
use lives in virperf.c and therefore has access to the FD anyway.
Well, for instance virPerfReadEvent is doing just that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Make virDomainControllerFindUnusedIndex() a global function so that it
can be used outside domain_conf.c (as well as higher up in
domain_conf.c itself)/ Also make its DomainDef arg a const* so that
functions which only have a const* to the domain can use it.
Move the logic from qemuDomainGenerateRandomKey into this new
function, altering the comments, variable names, and error messages
to keep things more generic.
NB: Although perhaps more reasonable to add soemthing to virrandom.c.
The virrandom.c was included in the setuid_rpc_client, so I chose
placement in vircrypto.
Introduce virCryptoHaveCipher and virCryptoEncryptData to handle
performing encryption.
virCryptoHaveCipher:
Boolean function to determine whether the requested cipher algorithm
is available. It's expected this API will be called prior to
virCryptoEncryptdata. It will return true/false.
virCryptoEncryptData:
Based on the requested cipher type, call the specific encryption
API to encrypt the data.
Currently the only algorithm support is the AES 256 CBC encryption.
Adjust tests for the API's
This solution does not keep snapshots cache because vz sdk lacks good support
for snapshot related events.
Libvirt and vz sdk has different approach to snapshot ids. vz sdk always
auto generate them while libvirt has ability to specify id by user.
Thus I have no other choice rather than simply ignore ids set by user
or generated by libvirt.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
For a few cases where we handle secret information it's good to clear
the buffers containing sensitive data before freeing them.
Introduce VIR_DISPOSE, VIR_DISPOSE_N and VIR_DISPOSE_STRING that allow
simple clearing fo the buffers holding sensitive information on cleanup
paths.
Move some parts of virStorageFileRemoveLastPathComponent
into a separate function so they can be reused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For disks sources described by a libvirt volume we don't need to do a
complicated check since virStorageTranslateDiskSourcePool already
correctly determines the actual disk type.
Replace the checks using a new accessor that does not open-code the
whole logic.
We had both and the only difference was that the latter also included
information about multifunction setting. The problem with that was that
we couldn't use functions made for only one of the structs (e.g.
parsing). To consolidate those two structs, use the one in virpci.h,
include that in domain_conf.h and add the multifunction member in it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When the domain definition describes a machine with NUMA, setting the
maximum vCPU count via the API might lead to an invalid config.
Add a check that will forbid this until we add more advanced cpu config
capabilities.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1327499
Add virDomainObjGetShortName() and use it. For now that's used in one
place, but we should expose it so that future patches can use it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Introduce the final accessor's to _virSecretObject data and move the
structure from virsecretobj.h to virsecretobj.c
The virSecretObjSetValue logic will handle setting both the secret
value and the value_size. Some slight adjustments to the error path
over what was in secretSetValue were made.
Additionally, a slight logic change in secretGetValue where we'll
check for the internalFlags and error out before checking for
and erroring out for a NULL secret->value. That way, it won't be
obvious to anyone that the secret value wasn't set rather they'll
just know they cannot get the secret value since it's private.
Move and rename the secretRewriteFile, secretSaveDef, and secretSaveValue
from secret_driver to virsecretobj
Need to make some slight adjustments since the secretSave* functions
called secretEnsureDirectory, but otherwise mostly just a move of code.
Move and rename secretDeleteSaved from secret_driver into virsecretobj and
split it up into two parts since there is error path code that looks to
just delete the secret data file
Move to secret_conf.c and rename to virSecretLoadAllConfigs. Also includes
moving/renaming the supporting virSecretLoad, virSecretLoadValue, and
virSecretLoadValidateUUID.
This patch replaces most of the guts of secret_driver.c with recently
added secret_conf.c APIs in order manage secret lists and objects
using the hashed virSecretObjList* lookup API's.
Since threadpool increments the current number of threads according to current
load, i.e. how many jobs are waiting in the queue. The count however, is
constrained by max and min limits of workers. The logic of this new API works
like this:
1) setting the minimum
a) When the limit is increased, depending on the current number of
threads, new threads are possibly spawned if the current number of
threads is less than the new minimum limit
b) Decreasing the minimum limit has no possible effect on the current
number of threads
2) setting the maximum
a) Icreasing the maximum limit has no immediate effect on the current
number of threads, it only allows the threadpool to spawn more
threads when new jobs, that would otherwise end up queued, arrive.
b) Decreasing the maximum limit may affect the current number of
threads, if the current number of threads is less than the new
maximum limit. Since there may be some ongoing time-consuming jobs
that would effectively block this API from killing any threads.
Therefore, this API is asynchronous with best-effort execution,
i.e. the necessary number of workers will be terminated once they
finish their previous job, unless other workers had already
terminated, decreasing the limit to the requested value.
3) setting priority workers
- both increase and decrease in count of these workers have an
immediate impact on the current number of workers, new ones will be
spawned or some of them get terminated respectively.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In order for the client to see all thread counts and limits, current total
and free worker count getters need to be introduced. Client might also be
interested in the job queue length, so provide a getter for that too. As with
the other getters, preparing for the admin interface, mutual exclusion is used
within all getters.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In a few places in libvirt we busy-wait for events, for example qemu
creating a monitor socket. This is problematic because:
- We need to choose a sufficiently small polling period so that
libvirt doesn't add unnecessary delays.
- We need to choose a sufficiently large polling period so that
the effect of busy-waiting doesn't affect the system.
The solution to this conflict is to use an exponential backoff.
This patch adds two functions to hide the details, and modifies a few
places where we currently busy-wait.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
There are two places in qemu_domain_address.c where we have a switch
statement to convert PCI controller models
(VIR_DOMAIN_CONTROLLER_MODEL_PCI*) into the connection type flag that
is matched when looking for an upstream connection for that model of
controller (VIR_PCI_CONNECT_TYPE_*). This patch makes a utility
function in conf/domain_addr.c to do that, so that when a new PCI
controller is added, we only need to add the new model-->connect-type
in a single place.
commit 30c61901 added new functions to libvirt_private.syms
not alpabetically sorted and erroneously added vz sources to
STATEFUL_DRIVER_SOURCE_FILES, which triggered check-aclrules
running while vz driver isn't ready for it yet.
Pushing under build-breaker rule.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Make it possible to build vz driver as a module and don't link it with
libvirt.so statically.
Remove registering it on client's side as far as we start relying on daemon
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Since we didn't opt to use one single event for device lifecycle for a
VM we are missing one last event if the device removal failed. This
event will be emitted once we asked to eject the device but for some
reason it is not possible.
Those are the last two places that uses the getter functions. Use a
direct access instead and remove those getters.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Removes the check for graphics type, it's not a public API and developer
know what he's doing and this check makes no sense. It also removes
the ability to allocate a new array if there is none. This was used by
the virDomainGraphicsListenAdd* functions and isn't used anymore.
This is now a simple getter with simple check for listens array presence
and whether the index in out of bounds.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This effectively removes virDomainGraphicsListenSetAddress which was
used only to change the address of listen structure and possible change
the listen type. The new function will auto-expand the listens array
and append a new listen.
The old function was used on pre-allocated array of listens and in most
cases it only "add" a new listen. The two remaining uses can access the
listen structure directly.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit id 'fb2bd208' essentially copied the qemuGetSecretString
creating an libxlGetSecretString. Rather than have multiple copies
of the same code, create src/secret/secret_util.{c,h} files and
place the common function in there.
Modify the the build in order to build the module as a library
which is then pulled in by both the qemu and libxl drivers for
usage from both qemu_command.c and libxl_conf.c
Using the existing virUUIDGenerateRandomBytes, move API to virrandom.c
rename it to virRandomBytes and add it to libvirt_private.syms.
This will be used as a fallback for generating a domain master key.
In some cases it's impractical to use the regular APIs as the bitmap
size needs to be pre-declared. These new APIs allow to use bitmaps that
self expand.
The new code adds a property to the bitmap to track the allocation of
memory so that VIR_RESIZE_N can be used.
This patch implement a set of interfaces for perf event. Based on
these interfaces, we can implement internal driver API for perf,
and get the results of perf conuter you care about.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-4-git-send-email-qiaowei.ren@intel.com
This allows setting the address in host and/or network order and makes
the naming consistent. Now you don't need to call [hn]to[nh]l()
functions as that is taken care of by these functions. Also, now
the *NetOrder take the address in network order, the other functions in
host order so the naming and usage is consistent. Some places were
having the address in network order and calling ntohl() just so the
original function can call htonl() again. This makes it nicer to read.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
It's just a combination of AddImplicitControllers, and AddConsoleCompat.
Every caller that wants ImplicitControllers also wants the ConsoleCompat
AFAICT, so lump them together. We also need it for future patches.
If we expose this information, which is one byte in every PCI config
file, we let all mgmt apps know whether the device itself is an endpoint
or not so it's easier for them to decide whether such device can be
passed through into a VM (endpoint) or not (*-bridge).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1317531
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This is a missing counterpart for virSocketAddrSetIPv4Addr()
and is going to be needed later in the tests.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These functions are going to be reused very shortly. So instead
of duplicating the code, lets move them into utils module.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introduce a helper to check supported device and domain config and move
the memory hotplug checks to it.
The advantage of this approach is that by default all new features are
considered unsupported by all hypervisors unless specifically changed
rather than the previous approach where every hypervisor would need to
declare that a given feature is unsupported.
The VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event will be triggered once a job
(such as migration) finishes and it will contain statistics for the job
as one would get by calling virDomainGetJobStats. Thanks to this event
it is now possible to get statistics of a completed migration of a
transient domain on the source host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
While trying to build with -Os I've encountered some build
failures.
util/vircommand.c: In function 'virCommandAddEnvFormat':
util/vircommand.c:1257:1: error: inlining failed in call to 'virCommandAddEnv': call is unlikely and code size would grow [-Werror=inline]
virCommandAddEnv(virCommandPtr cmd, char *env)
^
util/vircommand.c:1308:5: error: called from here [-Werror=inline]
virCommandAddEnv(cmd, env);
^
This function is big enough for the compiler to be not inlined.
This is the error message I'm seeing:
Then virDomainNumatuneNodeSpecified is exported and called from
other places. It shouldn't be inlined then.
In file included from network/bridge_driver_platform.h:30:0,
from network/bridge_driver_platform.c:26:
network/bridge_driver_linux.c: In function 'networkRemoveRoutingFirewallRules':
./conf/network_conf.h:350:1: error: inlining failed in call to 'virNetworkDefForwardIf.constprop': call is unlikely and code size would grow [-Werror=inline]
virNetworkDefForwardIf(const virNetworkDef *def, size_t n)
^
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
qemuProcessSetupEmulator runs at a point in time where there is only
the qemu main thread. Use virCgroupAddTask to put just that one task
into the emulator cgroup. That patch makes virCgroupMoveTask and
virCgroupAddTaskStrController obsolete.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Introduce virPolkitAgentCreate and virPolkitAgentDestroy
virPolkitAgentCreate will run the polkit pkttyagent image as an asynchronous
command in order to handle the local agent authentication via stdin/stdout.
The code makes use of the pkttyagent --notify-fd mechanism to let it know
when the agent is successfully registered.
virPolkitAgentDestroy will close the command effectively reaping our
child process
Since commit 47e5b5ae virCgroupAllowDevice allows to pass -1 as either
the minor or major device number and it automatically uses '*' in place
of that. Reuse the new approach through the code and drop the duplicated
functions.
Apparently we are not the only ones with dumb free functions
because dbus_message_unref() does not accept NULL either. But if
I were to vote, this one is even more evil. Instead of returning
an error just like we do it immediately dereference any pointer
passed and thus crash you app. Well done DBus!
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7f878ebda700 (LWP 31264)]
0x00007f87be4016e5 in ?? () from /usr/lib64/libdbus-1.so.3
(gdb) bt
#0 0x00007f87be4016e5 in ?? () from /usr/lib64/libdbus-1.so.3
#1 0x00007f87be3f004e in dbus_message_unref () from /usr/lib64/libdbus-1.so.3
#2 0x00007f87bf6ecf95 in virSystemdGetMachineNameByPID (pid=9849) at util/virsystemd.c:228
#3 0x00007f879761bd4d in qemuConnectCgroup (driver=0x7f87600a32a0, vm=0x7f87600c7550) at qemu/qemu_cgroup.c:909
#4 0x00007f87976386b7 in qemuProcessReconnect (opaque=0x7f87600db840) at qemu/qemu_process.c:3386
#5 0x00007f87bf6edfff in virThreadHelper (data=0x7f87600d5580) at util/virthread.c:206
#6 0x00007f87bb602334 in start_thread (arg=0x7f878ebda700) at pthread_create.c:333
#7 0x00007f87bb3481bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109
(gdb) frame 2
#2 0x00007f87bf6ecf95 in virSystemdGetMachineNameByPID (pid=9849) at util/virsystemd.c:228
228 dbus_message_unref(reply);
(gdb) p reply
$1 = (DBusMessage *) 0x0
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Move the logic from virDomainDiskDefDstDuplicates into
virDomainDiskDefCheckDuplicateInfo so that we don't have to loop
multiple times through the array of disks. Since the original function
was called in qemuBuildDriveDevStr, it was actually called for every
single disk which was quite wasteful.
Additionally the target uniqueness check needed to be duplicated in
the disk hotplug case, since the disk was inserted into the domain
definition after the device string was formatted and thus
virDomainDiskDefDstDuplicates didn't do anything in that case.
In the reverted commit d2e5538b1, the libxl driver was changed to copy
interface names autogenerated by libxl to the corresponding network def
in the domain's virDomainDef object. The copied name is freed when the
domain transitions to the shutoff state. But when migrating a domain,
the autogenerated name is included in the XML sent to the destination
host. It is possible an interface with the same name already exists on
the destination host, causing migration to fail.
This patch defines a new capability for setting the network device
prefix that will be used in the driver. Valid prefixes are
VIR_NET_GENERATED_PREFIX or the one announced by the driver.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Same as for deserializer, this method might get handy for admin one day.
The major reason for this patch is to stay consistent with idea, i.e.
when deserializer can be shared, why not serializer as well. The only
problem to be solved was that the daemon side serializer uses a code
snippet which handles sparse arrays returned by some APIs as well as
removes any string parameters that can't be returned to older clients.
This patch makes of the new virTypedParameterRemote datatype introduced
by one of the pvious patches.
Since the method is static to remote_driver, it can't even be used by our
daemon. Other than that, it would be useful to be able to use it with admin as
well. This patch uses the new virTypedParameterRemote datatype introduced in
one of previous patches.
Currently, the deserializer is hardcoded into remote_driver which makes
it impossible for admin to use it. One way to achieve a shared implementation
(besides moving the code to another module) would be pass @ret_params_val as a
void pointer as opposed to the remote_typed_param pointer and add a new extra
argument specifying which of those two protocols is being used and typecast
the pointer at the function entry. An example from remote_protocol:
struct remote_typed_param_value {
int type;
union {
int i;
u_int ui;
int64_t l;
uint64_t ul;
double d;
int b;
remote_nonnull_string s;
} remote_typed_param_value_u;
};
typedef struct remote_typed_param_value remote_typed_param_value;
struct remote_typed_param {
remote_nonnull_string field;
remote_typed_param_value value;
};
That would leave us with a bunch of if-then-elses that needed to be used across
the method. This patch takes the other approach using the new datatype
introduced in one of earlier commits.
A pretty nasty deadlock occurs while trying to rename a VM in parallel
with virDomainObjListNumOfDomains.
The short description of the problem is as follows:
Thread #1:
qemuDomainRename:
------> aquires domain lock by qemuDomObjFromDomain
---------> waits for domain list lock in any of the listed functions:
- virDomainObjListFindByName
- virDomainObjListRenameAddNew
- virDomainObjListRenameRemove
Thread #2:
virDomainObjListNumOfDomains:
------> aquires domain list lock
---------> waits for domain lock in virDomainObjListCount
Introduce generic virDomainObjListRename function for renaming domains.
It aquires list lock in right order to avoid deadlock. Callback is used
to make driver specific domain updates.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In some cases it may be better to have a bitmap representing state of
individual vcpus rather than iterating the definition. The new helper
creates a bitmap representing the state from the domain definition.
The name is confusing, and there are just two uses: one is a test case,
and the other will be removed as part of an upcoming refactoring of
the hostdev code.
This patch creates two bitmaps, one for macvlan device names and one
for macvtap. The bitmap position is used to indicate that libvirt is
currently using a device with the name macvtap%d/macvlan%d, where %d
is the position in the bitmap. When requested to create a new
macvtap/macvlan device, libvirt will now look for the first clear bit
in the appropriate bitmap and derive the device name from that rather
than just starting at 0 and counting up until one works.
When libvirtd is restarted, the qemu driver code that reattaches to
active domains calls the appropriate function to "re-reserve" the
device names as it is scanning the status of running domains.
Note that it may seem strange that the retry counter now starts at
8191 instead of 5. This is because we now don't do a "pre-check" for
the existence of a device once we've reserved it in the bitmap - we
move straight to creating it; although very unlikely, it's possible
that someone has a running system where they have a large number of
network devices *created outside libvirt* named "macvtap%d" or
"macvlan%d" - such a setup would still allow creating more devices
with the old code, while a low retry max in the new code would cause a
failure. Since the objective of the retry max is just to prevent an
infinite loop, and it's highly unlikely to do more than 1 iteration
anyway, having a high max is a reasonable concession in order to
prevent lots of new failures.
On the host when we start a container, it will be
placed in a cgroup path of
/machine.slice/machine-lxc\x2ddemo.scope
under /sys/fs/cgroup/*
Inside the containers' namespace we need to setup
/sys/fs/cgroup mounts, and currently will bind
mount /machine.slice/machine-lxc\x2ddemo.scope on
the host to appear as / in the container.
While this may sound nice, it confuses applications
dealing with cgroups, because /proc/$PID/cgroup
now does not match the directory in /sys/fs/cgroup
This particularly causes problems for systems and
will make it create repeated path components in
the cgroup for apps run in the container eg
/machine.slice/machine-lxc\x2ddemo.scope/machine.slice/machine-lxc\x2ddemo.scope/user.slice/user-0.slice/session-61.scope
This also causes any systemd service that uses
sd-notify to fail to start, because when systemd
receives the notification it won't be able to
identify the corresponding unit it came from.
In particular this break rabbitmq-server startup
Future kernels will provide proper cgroup namespacing
which will handle this problem, but until that time
we should not try to play games with hiding parent
cgroups.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION event will be triggered
whenever VIR_DOMAIN_JOB_MEMORY_ITERATION changes its value, i.e.,
whenever a new iteration over guest memory pages is started during
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This new function will add a single controller of the given model,
except the case of ich9-usb-ehci1 (the master controller for a USB2
controller set) in which case a set of related controllers will be
added (EHCI1, UHCI1, UHCI2, UHCI3). These controllers will not be
given PCI addresses, but should be otherwise ready to use.
"-1" is allowed for controller model, and means "default for this
machinetype". This matches the existing practice in
qemuDomainDefPostParse(), which always adds the default controller
with model = -1, and relies on the commandline builder to set a model
(that is wrong, but will be fixed later).
This replaces the virPCIKnownStubs string array that was used
internally for stub driver validation.
Advantages:
* possible values are well-defined
* typos in driver names will be detected at compile time
* avoids having several copies of the same string around
* no error checking required when setting / getting value
The names used mirror those in the
virDomainHostdevSubsysPCIBackendType enumeration.
We only support hotplugging SCSI controllers.
The USB and virtio-serial related code was never reachable because
this function was only called for VIR_DOMAIN_CONTROLLER_TYPE_SCSI
controllers.
This reverts commit ee0d97a and parts of commits 16db8d2
and d6d54cd1.
This function can be used to retrieve the current locked memory
limit for a process, so that the setting can be later restored.
Add a configure check for getrlimit(), which we now use.
On the very first log message we send to any output, we include
the libvirt version number and package string. In some bug reports
we have been given libvirtd.log files that came from a different
host than the corresponding /var/log/libvirt/qemu log files. So
extend the initial log message to include the hostname too.
eg on first log message we would now see:
$ libvirtd
2015-12-04 17:35:36.610+0000: 20917: info : libvirt version: 1.3.0
2015-12-04 17:35:36.610+0000: 20917: info : hostname: dhcp-1-180.lcy.redhat.com
2015-12-04 17:35:36.610+0000: 20917: error : qemuMonitorIO:687 : internal error: End of file from monitor
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Once more stuff will be moved into the vCPU data structure it will be
necessary to get a specific one in some ocasions. Add a helper that will
simplify this task.
Our domain_conf.* files are big enough. Not only they contain XML
parsing code, but they served as a storage of all functions whose
name is virDomain prefixed. This is just wrong as it gathers not
related functions (and modules) into one big file which is then
harder to maintain. Split virDomainObjList module into a separate
file called virdomainobjlist.[ch].
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As we need to provide support for URI aliases in libvirt-admin as well, URI
alias matching needs to be internally visible. Since
virConnectOpenResolveURIAlias does have a compatible signature, it could be
easily reused by libvirt-admin. This patch moves URI alias matching to util,
renaming it accordingly.
virConnectGetConfig and virConnectGetConfigPath were static libvirt
methods, merely because there hasn't been any need for having them
internally exported yet. Since libvirt-admin also needs to reference
its config file, 'xGetConfig' should be exported.
Besides moving, this patch also renames the methods accordingly,
as they are libvirt config specific.
Add the virLogManager API which allows for communication with
the virtlogd daemon to RPC program. This provides the client
side API to open log files for guest domains.
The virtlogd daemon is setup to auto-spawn on first use when
running unprivileged. For privileged usage, systemd socket
activation is used instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add virRotatingFileReader and virRotatingFileWriter objects
which allow reading & writing from/to files with automation
rotation to N backup files when a size limit is reached. This
is useful for guest logging when a guaranteed finite size
limit is required. Use of external tools like logrotate is
inadequate since it leaves the possibility for guest to DOS
the host in between invokations of logrotate.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce a new helper function "virDiskNameParse" which extends
virDiskNameToIndex but handling both disk index and partition index.
Also rework virDiskNameToIndex to be based on virDiskNameParse.
A test is also added for this function testing both valid and
invalid disk names.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
commit db488c79 assumed that dnsmasq would complete IPv6 DAD before
daemonizing, but in reality it doesn't wait, which creates problems
when libvirt's bridge driver sets the matching "dummy tap device" to
IFF_DOWN prior to DAD completing.
This patch waits for DAD completion by periodically polling the kernel
using netlink to check whether there are any IPv6 addresses assigned
to bridge which have a 'tentative' state (if there are any in this
state, then DAD hasn't yet finished). After DAD is finished, execution
continues. To avoid an endless hang in case something was wrong with
the kernel's DAD, we wait a maximum of 5 seconds.
Let's check to ensure we can find the Partition Table in the label
and that libvirt actually recognizes that type; otherwise, when we
go to read the partitions during a refresh operation we may not be
reading what we expect.
This will expand upon the types of errors or reason that a build
would fail, so we can create more direct error messages.
Add 'initial_memory' member to struct virDomainMemtune so that the
memory size can be pre-calculated once instead of inferring it always
again and again.
Separating of the fields will also allow finer granularity of decisions
in later patches where it will allow to keep the old initial memory
value in cases where we are handling incomming migration from older
versions that did not always update the size from NUMA as the code did
previously.
The change also requires modification of the qemu memory alignment
function since at the point where we are modifying the size of NUMA
nodes the total size needs to be recalculated too.
The refactoring done in this patch also fixes a crash in the hyperv
driver that did not properly initialize def->numa and thus
virDomainNumaGetMemorySize(def->numa) crashed.
In summary this patch should have no functional impact at this point.
Similar to commit id '35847860', it's possible to attempt to create
a 'netfs' directory in an NFS root-squash environment which will cause
the 'vol-delete' command to fail. It's also possible error paths from
the 'vol-create' would result in an error to remove a created directory
if the permissions were incorrect (and disallowed root access).
Thus rename the virFileUnlink to be virFileRemove to match the C API
functionality, adjust the code to following using rmdir or unlink
depending on the path type, and then use/call it for the VIR_STORAGE_VOL_DIR
I always felt like this function is qemu specific rather than
libvirt-wide. Other drivers may act differently on virDomainDef
change and in fact may require talking to underlying hypervisor
even if something else's than disk->src has changed. I know that
the function is still incomplete, but lets break that into two
commits that are easier to review. This one is pure code
movement.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These functions were made static as a part of commit cbfe38c since
they were no longer called from outside virnetdev.c. We once again
need to call them from another file, so this patch makes them once
again public.
In an NFS root-squashed environment the 'vol-delete' command will fail to
'unlink' the target volume since it was created under a different uid:gid.
This code continues the concepts introduced in virFileOpenForked and
virDirCreate[NoFork] with respect to running the unlink command under
the uid/gid of the child. Unlike the other two, don't retry on EACCES
(that's why we're here doing this now).
That function takes string list and returns first string in that list
that starts with the @prefix parameter with that prefix being skipped as
the caller knows what it starts with (also for easier manipulation in
future).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In order to share as much virsh' logic as possible with upcomming
virt-admin client we need to split virsh logic into virsh specific and
client generic features.
Since majority of virsh methods should be generic enough to be used by
other clients, it's much easier to rename virsh specific data to virshX
than doing this vice versa. It moved generic virsh commands (including info
and opts structures) to generic module vsh.c.
Besides renaming methods and structures, this patch also involves introduction
of a client specific control structure being referenced as private data in the
original control structure, introduction of a new global vsh Initializer,
which currently doesn't do much, but there is a potential for added
functionality in the future.
Lastly it introduced client hooks which are especially necessary during
client connecting phase.
We just need to update the entry in the second hash table. Since commit 8728a56
we have two hash tables for the domain list so that we can do O(1) lookup
regardless of looking up by UUID or name. Since with renaming a domain UUID does
not change, we only need to update the second hash table, where domains are
referenced by their name.
We will call both functions from the qemuDomainRename().
Signed-off-by: Tomas Meszaros <exo@tty.sk>
This new subelement is used in PCI controllers: the toplevel
*attribute* "model" of a controller denotes what kind of PCI
controller is being described, e.g. a "dmi-to-pci-bridge",
"pci-bridge", or "pci-root". But in the future there will be different
implementations of some of those types of PCI controllers, which
behave similarly from libvirt's point of view (and so should have the
same model), but use a different device in qemu (and present
themselves as a different piece of hardware in the guest). In an ideal
world we (i.e. "I") would have thought of that back when the pci
controllers were added, and used some sort of type/class/model
notation (where class was used in the way we are now using model, and
model was used for the actual manufacturer's model number of a
particular family of PCI controller), but that opportunity is long
past, so as an alternative, this patch allows selecting a particular
implementation of a pci controller with the "name" attribute of the
<model> subelement, e.g.:
<controller type='pci' model='dmi-to-pci-bridge' index='1'>
<model name='i82801b11-bridge'/>
</controller>
In this case, "dmi-to-pci-bridge" is the kind of controller (one that
has a single PCIe port upstream, and 32 standard PCI ports downstream,
which are not hotpluggable), and the qemu device to be used to
implement this kind of controller is named "i82801b11-bridge".
Implementing the above now will allow us in the future to add a new
kind of dmi-to-pci-bridge that doesn't use qemu's i82801b11-bridge
device, but instead uses something else (which doesn't yet exist, but
qemu people have been discussing it), all without breaking existing
configs.
(note that for the existing "pci-bridge" type of PCI controller, both
the model attribute and <model> name are 'pci-bridge'. This is just a
coincidence, since it turns out that in this case the device name in
qemu really is a generic 'pci-bridge' rather than being the name of
some real-world chip)
This function should return the greatest CPU number set in
/domain/cpu/numa/cell/@cpus. The idea is that we should compare
the returned value against /domain/vcpu value. Yes, there exist
users who think the following is a good idea:
<vcpu placement='static'>4</vcpu>
<cpu mode='host-model'>
<model fallback='allow'/>
<numa>
<cell id='0' cpus='0-1' memory='1048576' unit='KiB'/>
<cell id='1' cpus='9-10' memory='2097152' unit='KiB'/>
</numa>
</cpu>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Qemu reports physical size 0 for block devices. As 15fa84acbb
changed the behavior of qemuDomainGetBlockInfo to just query the monitor
this created a regression since we didn't report the size correctly any
more.
This patch adds code to refresh the physical size of a block device by
opening it and seeking to the end and uses it both in
qemuDomainGetBlockInfo and also in qemuDomainGetStatsOneBlock that was
broken since it was introduced in this respect.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1250982
The nodeinfo is reporting incorrect number of cpus and incorrect host
topology on PPC64 KVM hosts. The KVM hypervisor on PPC64 needs only
the primary thread in a core to be online, and the secondaries offlined.
While scheduling a guest in, the kvm scheduler wakes up the secondaries to
run in guest context.
The host scheduling of the guests happen at the core level(as only primary
thread is online). The kvm scheduler exploits as many threads of the core
as needed by guest. Further, starting POWER8, the processor allows splitting
a physical core into multiple subcores with 2 or 4 threads each. Again, only
the primary thread in a subcore is online in the host. The KVM-PPC
scheduler allows guests to exploit all the offline threads in the subcore,
by bringing them online when needed.
(Kernel patches on split-core http://www.spinics.net/lists/kvm-ppc/msg09121.html)
Recently with dynamic micro-threading changes in ppc-kvm, makes sure
to utilize all the offline cpus across guests, and across guests with
different cpu topologies.
(https://www.mail-archive.com/kvm@vger.kernel.org/msg115978.html)
Since the offline cpus are brought online in the guest context, it is safe
to count them as online. Nodeinfo today discounts these offline cpus from
cpu count/topology calclulation, and the nodeinfo output is not of any help
and the host appears overcommited when it is actually not.
The patch carefully counts those offline threads whose primary threads are
online. The host topology displayed by the nodeinfo is also fixed when the
host is in valid kvm state.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The new name makes it clear that the returned bitmap contains the
information about which CPUs are online, not eg. which CPUs are
present.
No behavioral change.
If one calls update-device with information that is not updatable,
libvirt reports success even though no data were updated. The example
used in the bug linked below uses updating device with <boot order='2'/>
which, in my opinion, is a valid thing to request from user's
perspective. Mainly since we properly error out if user wants to update
such data on a network device for example.
And since there are many things that might happen (update-device on disk
basically knows just how to change removable media), check for what's
changing and moreover, since the function might be usable in other
drivers (updating only disk path is a valid possibility) let's abstract
it for any two disks.
We can't possibly check for everything since for many fields our code
does not properly differentiate between default and unspecified values.
Even though this could be changed, I don't feel like it's worth the
complexity so it's not the aim of this patch.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1007228
This is a self-locking wrapper around virHashTable. Only a limited set
of APIs are implemented now (the ones which are used in the following
patch) as more can be added on demand.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
While working in qemu_monitor_json, I repeatedly found myself
getting a value then checking if it was an object. Add some
wrappers to make this task easier.
* src/util/virjson.c (virJSONValueObjectGetByType)
(virJSONValueObjectGetObject, virJSONValueObjectGetArray): New
functions.
(virJSONValueObjectGetString, virJSONValueObjectGetNumberInt)
(virJSONValueObjectGetNumberUint)
(virJSONValueObjectGetNumberLong)
(virJSONValueObjectGetNumberUlong)
(virJSONValueObjectGetNumberDouble)
(virJSONValueObjectGetBoolean): Simplify.
(virJSONValueIsNull): Change return type.
* src/util/virjson.h: Reflect changes.
* src/libvirt_private.syms (virjson.h): Export them.
* tests/jsontest.c (testJSONLookup): New test.
Signed-off-by: Eric Blake <eblake@redhat.com>
The wrapper is useful for calling qemuBlockJobEventProcess with the
event details stored in disk's privateData, which is the most likely
usage of qemuBlockJobEventProcess.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Complex jobs, such as migration, need to monitor several events at once,
which is impossible when each of the event uses its own condition
variable. This patch adds a single condition variable to each domain
object. This variable can be used instead of the other event specific
conditions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Add multikey API:
* virTypedParamsFilter that filters all the parameters with specified name.
* virTypedParamsGetStringList that returns a list with all the values for
specified name and string type.
Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virDomainObjGetOneDef will help to retrieve the correct definition
pointer from @vm in cases where VIR_DOMAIN_AFFECT_LIVE and
VIR_DOMAIN_AFFECT_CONFIG are mutually exclusive. The function simply
returns the correct pointer. This similarly to virDomainObjGetDefs will
greatly simplify the code.
https://bugzilla.redhat.com/show_bug.cgi?id=1220527
This type of information defines attributes of a system
baseboard. With one exception: board type is yet not implemented
in qemu so it's not introduced here either.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Move all the system_* fields into a separate struct. Not only this
simplifies the code a bit it also helps us to identify whether BIOS
info is present. We don't have to check all the four variables for
being not-NULL, but we can just check the pointer to the struct.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Move all the bios_* fields into a separate struct. Not only this
simplifies the code a bit it also helps us to identify whether BIOS
info is present. We don't have to check all the four variables for
being not-NULL, but we can just check the pointer to the struct.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virDomainLiveConfigHelperMethod that is used for this job now does
modify the flags but still requires the callers to extract the correct
definition objects.
In addition coverity and other static analyzers are usually unhappy as
they don't grasp the fact that @flags are upadted according to the
correct def to be present.
To work this issue around and simplify the calling chain let's add a new
helper that will work only on drivers that always copy the persistent
def to a transient at start of a vm. This will allow to drop a few
arguments. The new function syntax will also fill two definition
pointers rather than modifying the @flags parameter.
Since some functions can be optimized by reusing the buffers that they
already have instead of allocating and copying new ones, lets split
virBitmapToData to two functions where one only converts the data and
the second one is a wrapper that allocates the buffer if necessary.
Store the emulator pinning cpu mask as a pure virBitmap rather than the
virDomainPinDef since it stores only the bitmap and refactor
qemuDomainPinEmulator to do the same operations in a much saner way.
As a side effect virDomainEmulatorPinAdd and virDomainEmulatorPinDel can
be removed since they don't add any value.
Sometimes the only thing we need is the pointer to virDomainDiskDef and
having to call virDomainDiskIndexBy* APIs, storing the disk index, and
looking it up in the disks array is ugly. After this patch, we can just
call virDomainDiskBy* and get the pointer in one step.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Two new domain configuration XML elements are added to enable/disable
the protected key management operations for a guest:
<domain>
...
<keywrap>
<cipher name='aes|dea' state='on|off'/>
</keywrap>
...
</domain>
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Because there are multiple potential reasons for an error, this
function logs any errors before returning NULL (since the caller won't
have the information needed to determine which was the reason for
failure).
