Commit 5c43e2e introduced a NULL deref if there is a failure
in virStorageFileGetMetadataInternal.
* src/util/virstoragefile.c (virStorageFileGetMetadataFromBuf):
Fix error handling.
Signed-off-by: Eric Blake <eblake@redhat.com>
SO_REUSEADDR on Windows is actually akin to SO_REUSEPORT
on Linux/BSD. ie it allows 2 apps to listen to the same
port at once. Thus we must not set it on Win32 platforms
See http://msdn.microsoft.com/en-us/library/windows/desktop/ms740621.aspx
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When EIO comes to qemu while it's replying to
qemuMigrationUpdateJobStatus(), qemu blocks, the migration of RAM can
complete in the meantime, and when qemu unblocks, it sends us
BLOCK_IO_ERROR plus migrations "status": "complete". Even though we
act upon the BLOCK_IO_ERROR by setting the proper state of the domain,
the call still waits for the proper reply on monitor for query_migrate
and after it gets it, it checks that migration is completed and the
migration is finished. This is what abort_on_error flag was meant for
(we can migrate with these errors, but this flag must inhibit such
behaviour). Changing the order of the steps guarantees the flag works
properly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1045833
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The stripe_unit and stripe_count arguments are passed to rbd_create3 in
the wrong order, resulting in a stripe size of 1 byte with 4194304
stripes on newly created RBD volumes.
https://bugzilla.redhat.com/show_bug.cgi?id=1092208
Signed-off-by: Steven McDonald <steven.mcdonald@anchor.net.au>
Now that all clients have been adjusted, ensure that no future
misuse of readdir is introduced into the code base.
* cfg.mk (sc_prohibit_readdir): New rule.
* src/util/virfile.c (virDirRead): Exempt the wrapper.
Signed-off-by: Eric Blake <eblake@redhat.com>
More instances of failure to report (unlikely) readdir errors.
In one case, I chose to ignore them, given that a readdir error
would be no different than timing out on the loop, where the
fallback path behaves correctly either way.
* src/storage/storage_backend.c (virStorageBackendStablePath):
Ignore readdir errors.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemRefresh): Report readdir errors.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSIGetHostNumber): Likewise.
* src/storage/storage_backend_scsi.c (getNewStyleBlockDevice)
(getBlockDevice, virStorageBackendSCSIFindLUs): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Convert all remaining clients of readdir to use the new
interface, so that we can ensure (unlikely) errors while
reading a directory are reported.
* src/openvz/openvz_conf.c (openvzAssignUUIDs): Use new
interface.
* src/parallels/parallels_storage.c (parallelsFindVolumes)
(parallelsFindVmVolumes): Report readdir failures.
* src/qemu/qemu_driver.c (qemuDomainSnapshotLoad): Ignore readdir
failures.
* src/secret/secret_driver.c (loadSecrets): Likewise.
* src/qemu/qemu_hostdev.c
(qemuHostdevHostSupportsPassthroughVFIO): Report readdir failures.
* src/xen/xen_inotify.c (xenInotifyOpen): Likewise.
* src/xen/xm_internal.c (xenXMConfigCacheRefresh): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
In making the conversion to the new API, I fixed a couple bugs:
virSCSIDeviceGetSgName would leak memory if a directory
unexpectedly contained multiple entries;
virNetDevTapGetRealDeviceName could report a spurious error
from a stale errno inherited before starting the readdir search.
The decision on whether to store the result of virDirRead into
a variable is based on whether the end of the loop falls through
to cleanup code automatically. In some cases, we have loops that
are documented to return NULL on failure, and which raise an
error on most failure paths but not in the case where the directory
was unexpectedly empty; it may be worth a followup patch to
explicitly report an error if readdir was successful but the
directory was empty, so that a NULL return always has an error set.
* src/util/vircgroup.c (virCgroupRemoveRecursively): Use new
interface.
(virCgroupKillRecursiveInternal, virCgroupSetOwner): Report
readdir failures.
* src/util/virfile.c (virFileLoopDeviceOpenSearch)
(virFileNBDDeviceFindUnused, virFileDeleteTree): Use new
interface.
* src/util/virnetdevtap.c (virNetDevTapGetRealDeviceName):
Properly check readdir errors.
* src/util/virpci.c (virPCIDeviceIterDevices)
(virPCIDeviceFileIterate, virPCIGetNetName): Report readdir
failures.
(virPCIDeviceAddressIOMMUGroupIterate): Use new interface.
* src/util/virscsi.c (virSCSIDeviceGetSgName): Report readdir
failures, and avoid memory leak.
(virSCSIDeviceGetDevName): Report readdir failures.
* src/util/virusb.c (virUSBDeviceSearch): Report readdir
failures.
* src/util/virutil.c (virGetFCHostNameByWWN)
(virFindFCHostCapableVport): Report readdir failures.
Signed-off-by: Eric Blake <eblake@redhat.com>
This makes sure that errno is reset before readdir is called, even if
the loop does a 'continue'.
This fixes issue with musl libc which sets errno on sscanf. The
following 'continue' makes the errno be set before calling readdir.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Eric Blake <eblake@redhat.com>
Introduce a wrapper for readdir. This helps us make sure that we always
set errno before calling readdir and it will make sure errors are
properly logged.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Eric Blake <eblake@redhat.com>
With xend on the way out, installations may not even have
/usr/sbin/xend, which results in the following error when the
drivers are probed
2014-04-28 18:21:19.271+0000: 22129: error : virCommandWait:2426 :
internal error: Child process (/usr/sbin/xend status) unexpected exit
status 127: libvirt: error : cannot execute binary /usr/sbin/xend:
No such file or directory
Check for existence of /usr/sbin/xend before trying to run it with
the 'status' option.
The virFirewallAddRuleFull method originally had a single
compulsory virFirewallQueryCallback parameter. During dev
work though the ignoreErrors parameter was added and the
callback parameter made optional. The ATTRIBUTE_NONNULL
annotation was never removed though.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virnetsocket.c API is hardcoded to pass --timeout=30 to
any daemon it auto-starts. For inexplicable reasons the virtlockd
daemon did not implement the --timeout option, so it would
immediately exit on autostart with an error.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Make the lock plugin use virFileFindResource to find the
virtlockd daemon path, so that it executes the in-builddir
daemon if run from source tree.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Make the remote driver use virFileFindResource to find the
libvirt daemon path, so that it executes the in-builddir
daemon if run from source tree.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When a snapshot operation finishes we have to recheck the backing chain
of all disks involved in the snapshot. And we need to do that even if
the operation failed because some of the disks might have changed if
QEMU did not support transactions.
The check for a network being active during interface attach was being
done individually in several places (by both the lxc driver and the
qemu driver), but those places were too specific, leading to it *not*
being checked when allocating a connection/device from a macvtap or
hostdev network.
This patch puts a single check in networkAllocateActualDevice(), which
is always called before the any network interface is attached to any
type of domain. It also removes all the other now-redundant checks
from the lxc and qemu drivers.
NB: the following patches are prerequisites for this patch, in the
case that it is backported to any branch:
440beeb network: fix virNetworkObjAssignDef and persistence
8aaa5b6 network: create statedir during driver initialization
b9e9549 network: change location of network state xml files
411c548 network: set macvtap/hostdev networks active if their state
file exists
This fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=880483
libvirt attempts to determine at startup time which networks are
already active, and set their active flags. Previously it has done
this by assuming that all networks are inactive, then setting the
active flag if the network has a bridge device associated with it and
that bridge device exists. This is not useful for macvtap and hostdev
based networks, since they do not use a bridge device.
Of course the reason that such a check had to be done was that the
presence of a status file in the network "stateDir" couldn't be
trusted as an indicator of whether or not a network was active. This
was due to the network driver mistakenly using
/var/lib/libvirt/network to store the status files, rather than
/var/run/libvirt/network (similar to what is done by every other
libvirt driver that stores status xml for its objects). The difference
is that /var/run is cleared out when the host reboots, so you can be
assured that the state file you are seeing isn't just left over from a
previous boot of the host.
Now that the network driver has been switched to using
/var/run/libvirt/network for status, we can also modify it to assume
that any network with an existing status file is by definition active
- we do this when reading the status file. To fine tune the results,
networkFindActiveConfigs() is changed to networkUpdateAllState(),
and only sets active = 0 if the conditions for particular network
types are *not* met.
The result is that during the first run of libvirtd after the host
boots, there are no status files, so no networks are active. Any time
libvirtd is restarted, any network with a status file will be marked
as active (unless the network uses a bridge device and that device for
some reason doesn't exist).
For some reason these have been stored in /var/lib, although other
drivers (e.g. qemu and lxc) store their state files in /var/run.
It's much nicer to store state files in /var/run because it is
automatically cleared out when the system reboots. We can then use
existence of the state file as a convenient indicator of whether or
not a particular network is active.
Since changing the location of the state files by itself will cause
problems in the case of a *live* upgrade from an older libvirt that
uses /var/lib (because current status of active networks will be
lost), the network driver initialization has been modified to migrate
any network state files from /var/lib to /var/run.
This will not help those trying to *downgrade*, but in practice this
will only be problematic in two cases
1) If there are networks with network-wide bandwidth limits configured
*and in use* by a guest during a downgrade to "old" libvirt. In this
case, the class ID's used for that network's tc rules, as well as
the currently in-use bandwidth "floor" will be forgotten.
2) If someone does this: 1) upgrade libvirt, 2) downgrade libvirt, 3)
modify running state of network (e.g. add a static dhcp host, etc),
4) upgrade. In this case, the modifications to the running network
will be lost (but not any persistent changes to the network's
config).
This directory should be created when the network driver is first
started up, not just when a dhcp daemon is run. This hasn't posed a
problem in the past, because the directory has always been
pre-existing.
Experimentation showed that if virNetworkCreateXML() was called for a
network that was already defined, and then the network was
subsequently shutdown, the network would continue to be persistent
after the shutdown (expected/desired), but the original config would
be lost in favor of the transient config sent in with
virNetworkCreateXML() (which would then be the new persistent config)
(obviously unexpected/not desired).
To fix this, virNetworkObjAssignDef() has been changed to
1) properly save/free network->def and network->newDef for all the
various combinations of live/active/persistent, including some
combinations that were previously considered to be an error but didn't
need to be (e.g. setting a "live" config for a network that isn't yet
active but soon will be - that was previously considered an error,
even though in practice it can be very useful).
2) automatically set the persistent flag whenever a new non-live
config is assigned to the network (and clear it when the non-live
config is set to NULL). the libvirt network driver no longer directly
manipulates network->persistent, but instead relies entirely on
virNetworkObjAssignDef() to do the right thing automatically.
After this patch, the following sequence will behave as expected:
virNetworkDefineXML(X)
virNetworkCreateXML(X') (same name but some config different)
virNetworkDestroy(X)
At the end of these calls, the network config will remain as it was
after the initial virNetworkDefine(), whereas previously it would take
on the changes given during virNetworkCreateXML().
Another effect of this tighter coupling between a) setting a !live def
and b) setting/clearing the "persistent" flag, is that future patches
which change the details of network lifecycle management
(e.g. upcoming patches to fix detection of "active" networks when
libvirtd is restarted) will find it much more difficult to break
persistence functionality.
This fixes the following make rpm warning:
warning: Installed (but unpackaged) file(s) found:
/usr/lib64/libvirt/connection-driver/libvirt_driver_nwfilter.so.0
/usr/lib64/libvirt/connection-driver/libvirt_driver_nwfilter.so.0.0.0
introduced in comit 8d559864
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently the driver only exposes the ability to connect to the serial console
of a Xen guest, which doesn't work for a PV guest. Since for an HVM guest the
serial devices are duplicated as consoles it is sufficient to just use the
console devices unconditionally.
Tested with the following bit of config XML:
<domain type='xen'>
...
<devices>
<console type='pty'>
<target type='xen'/>
</console>
</devices>
</domain>
I have observed and tested this on ARM but I believe it also applies to x86 PV
guests.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Jim Fehlig <jfehlig@suse.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Cc: Clark Laughlin <clark.laughlin@linaro.org>
Create a nwfilterxml2firewalltest to exercise the
ebiptables_driver.applyNewRules method with a variety of
different XML input files. The XML input files are taken
from the libvirt-tck nwfilter tests. While the nwfilter
tests verify the final state of the iptables chains, this
test verifies the set of commands invoked to create the
chains.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove all the left over code related to the direct invocation
of firewall-cmd/iptables/ip6tables/ebtables. This is all handled
by the virFirewallPtr APIs now.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Conver the ebiptablesDriverProbeStateMatch initialization
check to use the virFirewall APIs for querying iptables
version.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the nwfilter ebtablesApplyNewRules method to use the
virFirewall object APIs instead of creating shell scripts
using virBuffer APIs. This provides a performance improvement
through allowing direct use of firewalld dbus APIs and will
facilitate automated testing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the nwfilter ebtablesApplyDropAllRules method to use the
virFirewall object APIs instead of creating shell scripts
using virBuffer APIs. This provides a performance improvement
through allowing direct use of firewalld dbus APIs and will
facilitate automated testing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the nwfilter ebtablesApplyDHCPOnlyRules method to use the
virFirewall object APIs instead of creating shell scripts
using virBuffer APIs. This provides a performance improvement
through allowing direct use of firewalld dbus APIs and will
facilitate automated testing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the nwfilter ebtablesApplyBasicRules method to use the
virFirewall object APIs instead of creating shell scripts
using virBuffer APIs. This provides a performance improvement
through allowing direct use of firewalld dbus APIs and will
facilitate automated testing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the nwfilter ebiptablesTearNewRules method to use the
virFirewall object APIs instead of creating shell scripts
using virBuffer APIs. This provides a performance improvement
through allowing direct use of firewalld dbus APIs and will
facilitate automated testing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the nwfilter ebtablesRemoveBasicRules method to use the
virFirewall object APIs instead of creating shell scripts
using virBuffer APIs. This provides a performance improvement
through allowing direct use of firewalld dbus APIs and will
facilitate automated testing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the nwfilter ebiptablesTearOldRules method to use the
virFirewall object APIs instead of creating shell scripts
using virBuffer APIs. This provides a performance improvement
through allowing direct use of firewalld dbus APIs and will
facilitate automated testing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the nwfilter ebiptablesAllTeardown method to use the
virFirewall object APIs instead of creating shell scripts
using virBuffer APIs. This provides a performance improvement
through allowing direct use of firewalld dbus APIs and will
facilitate automated testing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the virebtables.{c,h} files to use the new virFirewall
APIs for changing ebtables rules.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The networkCheckRouteCollision, networkAddFirewallRules and
networkRemoveFirewallRules APIs all take a virNetworkObjPtr
instance, but only ever access the 'def' member. It thus
simplifies testing if the APIs are changed to just take a
virNetworkDefPtr instead
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the iptablesXXXX methods so that instead of directly
executing iptables commands, they populate rules in an
instance of virFirewallPtr. The bridge driver can thus
construct the ruleset and then invoke it in one operation
having rollback handled automatically.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The network and nwfilter drivers both have a need to update
firewall rules. The currently share no code for interacting
with iptables / firewalld. The nwfilter driver is fairly
tied to the concept of creating shell scripts to execute
which makes it very hard to port to talk to firewalld via
DBus APIs.
This patch introduces a virFirewallPtr object which is able
to represent a complete sequence of rule changes, with the
ability to have multiple transactional checkpoints with
rollbacks. By formally separating the definition of the rules
to be applied from the mechanism used to apply them, it is
also possible to write a firewall engine that uses firewalld
DBus APIs natively instead of via the slow firewalld-cmd.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When a VM fails to launch due to error creating nwfilter
rules, we must avoid overwriting the original error when
tearing down the partially created rules.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The nwfilter ebiptables driver will build up commands to run in
two phases. The first phase contains all of the command, except
for the '-A' part. Instead it has a '%c' placeholder, along with
a '%s' placeholder for a position arg. The second phase than
substitutes these placeholders. The only values ever used for
these substitutions though is '-A' and '', so it is entirely
pointless. Remove the second phase entirely, since it will make
it harder to convert to the new firewall APIs
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The current nwfilter tech driver API has a 'createRuleInstance' method
which populates virNWFilterRuleInstPtr with a command line string
containing variable placeholders. The 'applyNewRules' method then
expands the variables and executes the commands. This split of
responsibility won't work when switching to the virFirewallPtr
APIs, since we can't just build up command line strings. This patch
this merges the functionality of 'createRuleInstance' into the
applyNewRules method.
The virNWFilterRuleInstPtr struct is changed from holding an array
of opaque pointers, into holding generic metadata about the rules
to be processed. In essence this is the result of taking a linked
set of virNWFilterDefPtr's and flattening the tree to get a list
of virNWFilterRuleDefPtr's. At the same time we must keep track of
any nested virNWFilterObjPtr instances, so that the locks are held
for the duration of the 'applyNewRules' method.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Later refactoring will change use of the virNWFilterRuleInstPtr struct.
Prepare for this by pushing use of the virNWFilterRuleInstPtr parameter
out of the ebtablesCreateRuleInstance and iptablesCreateRuleInstance
methods. Instead they simply string(s) with the constructed rule data.
The ebiptablesCreateRuleInstance method will make use of the
virNWFilterRuleInstPtr struct instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add virNWFilterRuleIsProtocol{Ethernet,IPv4,IPv6} helper methods
to avoid having to write a giant switch statements with many cases.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'displayRuleInstance' callback in the nwfilter tech driver
is never invoked, so can be deleted.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virNWFilterHashTable struct contains a virHashTable and
then a 'char **names' field which keeps a copy of all the
hash keys. Presumably this was intended to record the ordering
of the hash keys. No code ever uses this and the ordering is
mangled whenever a variable is removed from the hash, because
the last element in the list is copied into the middle of the
list when shrinking the array.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'virDomainNetType' is unused in every impl of the
virNWFilterRuleCreateInstance driver method. Remove it
from the code to avoid the dependancy on the external
enum.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virNWFilterTechDriver struct is nothing to do with the nwfilter
XML configuration. It stores data specific to the driver implementation
so should be in a header in the driver directory instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If virNWFilterVarValueCreateSimple fails with OOM, then
'val' will be leaked by virNWFilterVarValueCreateSimpleCopyValue
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit c4206d7 fixed the overflow for running domains. However, we need
a similar check when setting migration speed on inactive domains.
At first look, it may seem the check in c4206d7 is now redundant but
qemuDomainMigrateSetMaxSpeed is not the only caller of
qemuMonitorSetMigrationSpeed so we need to check the bandwidth in both
places.
https://bugzilla.redhat.com/show_bug.cgi?id=1083483
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Instead of hardcoding LIBEXECDIR as the location of the libvirt_iohelper
binary, use virFileFindResource to optionally find it in the current
build directory.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of hardcoding LIBEXECDIR as the location of the libvirt_parthelper
binary, use virFileFindResource to optionally find it in the current
build directory.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of hardcoding LIBEXECDIR as the location of the libvirt_lxc
binary set in the LXC driver capabilities, use virFileFindResource
to optionally find it in the current build directory.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of hardcoding LIBEXECDIR as the location of the libvirt_iohelper
binary, use virFileFindResource to optionally find it in the current
build directory.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add virFileFindResource which will try to locate files
in the local build tree if the calling binary (eg libvirtd or
test suite) is being run from the build tree. The corresponding
virFileActivateDirOverride should be called at startup passing
in argv[0]. This will be examined for evidence of libtool magic
binary prefix / sub-directory in order to activate the override.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Each backing store of a given disk is associated with a unique index
(which is also formatted in domain XML) for easier addressing of any
particular backing store. With this patch, any backing store can be
addressed by its disk target and the index. For example, "vdc[4]"
addresses the backing store with index equal to 4 of the disk identified
by "vdc" target. Such shorthand can be used in any API in place for a
backing file path:
virsh blockcommit domain vda --base vda[3] --top vda[2]
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virStorageFileChainLookup is able to give use virStorageSourcePtr which
contains the pointer to its canonical path. Let's use a more general
virStorageSourcePtr instead of just canonical path.
Former base_canon maps to baseSource->path.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virStorageFileChainLookup is able to give use virStorageSourcePtr which
contains the pointer to its canonical path. There's no need for the
caller to store both of them.
Former top_meta maps to topSource and top_canon maps to topSource->path.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Once again, gcc 4.4.7 (hello RHEL) rears its ugly head:
conf/domain_conf.c: In function 'virDomainDiskBackingStoreFormat':
conf/domain_conf.c:14940: error: declaration of 'index' shadows a global declaration [-Wshadow]
/usr/include/string.h:489: error: shadowed declaration is here [-Wshadow]
* src/conf/domain_conf.c (virDomainDiskBackingStoreFormat): Pacify
older gcc.
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch implements formating and parsing code for the backing store
schema defined and documented by the previous patch.
This patch does not aim at providing full persistent storage of disk
backing chains yet. The formatter is supposed to provide the backing
chain detected when starting a domain and thus it is not formatted into
an inactive domain XML. The parser is implemented mainly for the purpose
of testing the XML generated by the formatter and thus it does not
distinguish between no backingStore element and an empty backingStore
element. This will have to change once we fully implement support for
user-supplied backing chains.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Recent discussions around naming of 'pci' vs 'pci.0' for PPC
made me go back and look at the PPC emulator in every historical
version of QEMU since 1.0. The results were worse than I imagined.
This patch adds the logic required to make libvirt work with PPC
correctly with naming variations across all versions & machine
types.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To avoid having the root of a backing chain present twice in the list we
need to invert the working of virStorageFileGetMetadataRecurse.
Until now the recursive worker created a new backing chain element from
the name and other information passed as arguments. This required us to
pass the data of the parent in a deconstructed way and the worker
created a new entry for the parent.
This patch converts this function so that it just fills in metadata
about the parent and creates a backing chain element from those. This
removes the duplication of the first element.
To avoid breaking the test suite, virstoragetest now calls a wrapper
that creates the parent structure explicitly and pre-fills it with the
test data with same function signature as previously used.
Switch over to storing of the backing chain as a recursive
virStorageSource structure.
This is a string based move. Currently the first element will be present
twice in the backing chain as currently the retrieval function stores
the parent in the newly detected chain. This will be fixed later.
Add the required fields that are missing from the new structure that
will allow us to switch the storage file metadata code entirely to the
new structure.
Add "relPath" and "relDir" and the raw backing store name. Also allow
creating linked lists of virStorageSourcePtrs to express backing chains.
Remove the obsolete field replaced by data in "path".
The testsuite requires tweaking as the name of the backing file is now
stored one layer deeper in the backing chain linked list.
As a temporary step to allow killing of the "backingStore" field of
struct virStorageFileMetadata the recursive metadata retrieval function
will be converted not to use the field in the lookup process.
As for the previous patch, this change is needed to achieve
compatibility with all the existing code, where we expect a fully
qualified path of local files to be present.
To allow future change of virStorageFileMetadata to virStorageSource we
need to store a full path in the "path" variable as rest of the code
expects it to be a full path. Rename the "path" field to "relPath" to
keep tracking the info but allowing a real "path" field.
Avoid passing lot of arguments into guts of metadata retrieval to fill
the actual structure. Temporarily fill the structure before passing it
down to the actual metadata extractor.
This will later help the inversion of the steps taken to extract the
metadata so that this function can be fully converted to
virStorageSource as the data struct.
This patch also fixes regression when starting a gluster storage pool
where the volumes don't have local representation so that the
canonicalization of the volume's file name failed. Broken by commit
79f11b35
Move the code checking the presence of the backing file to the recursive
worker function instead of the metadata parser. The recursive worker
will later be changed to parse more than just local files and this
change will help the separation.
As we already pass the whole structure down the call path there's no
need to return some stuff in a separate argument. Remove the argument
and tweak callers to avoid breaking semantics.
virStorageFileGetMetadataFromBuf will be refactored later along with the
storage driver.
Don't use the backingStoreRaw as a indication of broken chains. Fill it
always and tweak the broken image chain detector to avoid changing the
semantics.
The new semantics to detect a broken chain is the presence of string in
backingStoreRaw but the lack of the backing chain metadata structure in
the chain.
Now that the raw backing store name is always filled there's no need to
pass the raw name variable separately to fill in case the backing is not
a file. Tweak the function so that it can handle a NULL in that case.
- do not lose new definition for an active domain
- do not leak oldDef
- do not set dom->id if virDomainSaveConfig() fails
- do not call virObjectUnlock(vm) if vm is NULL
Currently, libvirt is using legacy USB controller as default. There
are problems with VGA which can't work correctly with USB Keyboard and
USB Mouse.
While providing -nodefaults, ppc64 should be specifying the usb
controller explicitly in place of using the legacy
controller(-usb). Qemu spapr initialization code when sees "-usb" adds a
USB Keyboard and USB Mouse by default. And libvirt has added a USB
keyboard and USB mouse.
A recent fix in the in qemu VGA code uncoverd this problem, which
resulted in addition of extra keyboard and mouse to the qemu machine.
This patch is to set pci-ohci as USB default controller.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Remove the pointer from def->cputune.vcpupin after unplugging
the CPU and also free the bitmap contained in the structure
by calling virDomainVcpuPinDel instead of VIR_FREE.
Introduced by commit 0df1a79.
This makes virDomainLookupVcpuPin redundant.
https://bugzilla.redhat.com/show_bug.cgi?id=1088165
Implement bhyveDomainCreateXML function.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
While running virstoragetest, valgrind pointed out the following
memory leak:
==8142== 2 bytes in 1 blocks are definitely lost in loss record 1 of 92
==8142== at 0x4A069EE: malloc (vg_replace_malloc.c:270)
==8142== by 0x4E7B53E: mdir_name (dirname-lgpl.c:78)
==8142== by 0x4CBE2B0: virStorageFileGetMetadataInternal (virstoragefile.c:595)
==8142== by 0x4CBE651: virStorageFileGetMetadataFromFDInternal (virstoragefile.c:1086)
==8142== by 0x4CBEEB4: virStorageFileGetMetadataRecurse (virstoragefile.c:1175)
==8142== by 0x4CBF1DE: virStorageFileGetMetadata (virstoragefile.c:1270)
==8142== by 0x4028AD: testStorageChain (virstoragetest.c:275)
==8142== by 0x407B91: virtTestRun (testutils.c:201)
==8142== by 0x4039D7: mymain (virstoragetest.c:534)
==8142== by 0x40830D: virtTestMain (testutils.c:789)
==8142== by 0x3E6CE1ED1C: (below main) (libc-start.c:226)
...62 times
Commit id '18642d10' caused a virt-test regression for NFS backend
storage error path checks when running the command:
'virsh find-storage-pool-sources-as netfs Unknown '
when the host did not have Gluster installed. Prior to the commit,
the test would fail with the error:
error: internal error: Child process (/usr/sbin/showmount --no-headers
--exports Unknown) unexpected exit status 1: clnt_create: RPC: Unknown host
After the commit, the error would be ignored, the call would succeed,
and an empty list of pool sources returned. This was tucked into the
commit message as an expected outcome.
When the target host does not have a GLUSTER_CLI this is a regression
over the previous release. Furthermore, even if Gluster CLI was present,
but had a failure to get devices, the API would return a failure even if
the NFS backend had found devices.
Modify the logic to return failure when the NFS backend check fails and
there's no GLUSTER_CLI or when both backend checks fail.
If either returns success and GLUSTER_CLI is defined, then fetch and return
a list of source devices even if it's empty
I noticed that depending on the <driver> attributes the user passed
in, the output may omit the <driver> element altogether. For example,
the rerror_policy has had this problem since commit 4bb4109 in Oct
2011. But in adding testsuite coverage to expose it, I found another
problem: the C code is just fine without a driver name, but the
XML validator required either a name or a cache mode.
* src/conf/domain_conf.c (virDomainDiskDefFormat): Update
conditional.
* docs/schemas/domaincommon.rng (diskDriver): Simplify.
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-copy-on-read.xml:
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-copy-on-read.args:
New files.
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-discard.xml:
Enhance test.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-drive-discard.xml:
Likewise.
* tests/qemuxml2argvtest.c (mymain): New test.
* tests/qemuxml2xmltest.c (mymain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Domain snapshots should only permit an external snapshot into
a storage format that permits a backing chain, since the new
snapshot file necessarily must be backed by the existing file.
The C code for the qemu driver is a little bit stricter in
currently enforcing only qcow2 or qed, but at the XML parser
level, including virt-xml-validate, it is fairly easy to
enforce that a user can't request a 'raw' external snapshot.
* docs/schemas/storagecommon.rng (storageFormat): Split out...
(storageFormatBacking): ...new sublist.
* docs/schemas/domainsnapshot.rng (disksnapshotdriver): Use new
type.
* src/util/virstoragefile.h (virStorageFileFormat): Rearrange for
easier code management.
* src/util/virstoragefile.c (virStorageFileFormat, fileTypeInfo):
Likewise.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefParseXML): Use
new marker to limit selection of formats.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit 4897698 fixed the build without dbus by only building
the virSystemdPMSupportTarget with SYSTEMD_DAEMON.
Introduce a virDBusMessageUnref wrapper for dbus_message_unref
to let virsystemd.c build without dbus, while still allowing
virsystemdtest to run without SYSTEM_DAEMON.
In order to do that, virNodeSuspendSupportsTargetPMUtils() and
virSystemdPMSupportTarget() are created even when pm-utils and dbus
are compiled out, respectively, but in that case returning -2 meaning
"unavailable" (this return code was already used for unavailability
before). Error is reported in virNodeSuspendSupportsTarget() only if
both functions returned -2, otherwise the error (or success) is properly
propagated up the stack.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When passing migration bandwidth to QEMU, we multiply it by 1024 * 1024
to convert the speed to B/s and the result still needs to fit in
int64_t.
https://bugzilla.redhat.com/show_bug.cgi?id=1083483
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Another field no longer needed, getting us one step closer to
merging virStorageFileMetadata and virStorageSource.
* src/util/virstoragefile.h (_virStorageFileMetadata): Drop
field.
* src/util/virstoragefile.c (virStorageFileGetMetadataInternal)
(virStorageFileGetMetadataFromFDInternal): Alter signature.
(virStorageFileFreeMetadata, virStorageFileGetMetadataFromBuf)
(virStorageFileGetMetadataFromFD): Adjust clients.
* tests/virstoragetest.c (_testFileData, testStorageChain)
(mymain): Simplify test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Thanks to the testsuite, I feel quite confident that this rewrite
is correct; it gives the same results for all cases except for one.
I can make the argument that _that_ case was a pre-existing bug:
when looking up relative names, the lookup is supposed to be
pegged to the directory that contains the parent qcow2 file. Thus,
this resolves the fixme first mentioned in commit 367cd69 (even
though I accidentally removed the fixme comment early in 74430fe).
* src/util/virstoragefile.c (virStorageFileChainLookup): Depend on
new rather than old fields.
* tests/virstoragetest.c (mymain): Adjust test to match fix.
Signed-off-by: Eric Blake <eblake@redhat.com>
The original chain lookup code had to pass in the starting name,
because it was not available in the chain. But now that we have
added fields to the struct, this parameter is redundant.
* src/util/virstoragefile.h (virStorageFileChainLookup): Alter
signature.
* src/util/virstoragefile.c (virStorageFileChainLookup): Adjust
handling of top of chain.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Adjust caller.
* tests/virstoragetest.c (testStorageLookup, mymain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The chain lookup function was inconsistent on whether it left
a message in the log when looking up a name that is not found
on the chain (leaving a message for OOM or if name was
relative but not part of the chain), and could litter the log
even when successful (when name was relative but deep in the
chain, use of virFindBackingFile early in the chain would complain
about a file not found). It's easier to make the function
consistently emit a message exactly once on failure, and to let
all callers rely on the clean semantics.
* src/util/virstoragefile.c (virStorageFileChainLookup): Always
report error on failure. Simplify relative lookups.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Avoid
overwriting error.
Signed-off-by: Eric Blake <eblake@redhat.com>
When checking if two filenames point to the same inode (whether
by hardlink or symlink), sometimes one of the names might be
relative. This convenience function makes it easier to check.
* src/util/virfile.h (virFileRelLinkPointsTo): New prototype.
* src/util/virfile.c (virFileRelLinkPointsTo): New function.
* src/libvirt_private.syms (virfile.h): Export it.
* src/xen/xm_internal.c (xenXMDomainGetAutostart): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Drop another redundant field from virStorageFileMetadata.
* src/util/virstoragefile.h (_virStorageFileMetadata): Drop
field.
* src/util/virstoragefile.c
(virStorageFileGetMetadataFromFDInternal)
(virStorageFileGetMetadataFromFD)
(virStorageFileGetMetadataRecurse): Adjust callers.
* tests/virstoragetest.c (_testFileData, testStorageChain)
(mymain): Simplify test.
Signed-off-by: Eric Blake <eblake@redhat.com>
A couple pieces of virStorageFileMetadata are used only while
collecting information about the chain, and don't need to
live permanently in the struct. This patch refactors external
callers to collect the information separately, so that the
next patch can remove the fields.
* src/util/virstoragefile.h (virStorageFileGetMetadataFromBuf):
Alter signature.
* src/util/virstoragefile.c (virStorageFileGetMetadataInternal):
Likewise.
(virStorageFileGetMetadataFromFDInternal): Adjust callers.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Finally starting to prune away some of the old fields that have
been made redundant by the new fields, on my way towards directly
reusing virStorageSource.
* src/util/virstoragefile.h (_virStorageFileMetadata): Drop
field.
* src/util/virstoragefile.c (virStorageFileGetMetadataInternal)
(virStorageFileChainLookup): Adjust callers.
* tests/virstoragetest.c (_testFileData, testStorageChain)
(mymain): Simplify test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Deciding if a user string represents a local file instead of a
network path is an operation worth exposing directly, particularly
since the next patch will be removing a redundant variable that
was caching the information.
* src/util/virstoragefile.h (virStorageIsFile): New declaration.
* src/util/virstoragefile.c (virBackingStoreIsFile): Rename...
(virStorageIsFile): ...export, and allow NULL input.
(virStorageFileGetMetadataInternal)
(virStorageFileGetMetadataRecurse, virStorageFileGetMetadata):
Update callers.
* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Use it.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
* src/libvirt_private.syms (virstoragefile.h): Export function.
Signed-off-by: Eric Blake <eblake@redhat.com>
So far, my work has been merely preserving the status quo of
backing file analysis. But this patch starts to tread in the
territory of making the backing chain code more powerful - we
will eventually support network storage containing non-raw
formats. Here, we expose metadata information about a network
backing store, even if that information is still hardcoded to
a raw format for now.
* src/util/virstoragefile.c (virStorageFileGetMetadataRecurse):
Also populate struct for non-file backing.
(virStorageFileGetMetadata, virStorageFileGetMetadatainternal):
Recognize non-file top image.
(virFindBackingFile): Add comment.
(virStorageFileChainGetBroken): Adjust comment, ensure output
is set.
* tests/virstoragetest.c (mymain): Update test to reflect it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of the APIs in CPU driver do not expect to get NULL for input
parameters. Let's mark them with ATTRIBUTE_NONNULL and also check for
some members of virCPUDef when the APIs expect them have some specific
values.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The iterator is checked for being less than or equal to need_cpus.
The 'n' variable is incremented need_cpus + 1 times.
Simplify the computation of need_cpus and make its value one larger,
to let it be used instead of 'n' and compared without the equal sign
in loop conditions.
Just index the sum_cpu_time array instead of using a helper variable.
Start the loop at start_cpu instead of continuing for all lower values.
total_cpus is the total number of CPUs on the host
need_cpus is the number of CPUs we need to look at
(need_cpus can be larger than ncpus, because we need to look
at CPUs before the startcpu too, even if we aren't reporting
their stats)
Currently, virCgroupGetPercpuStats is only used by the LXC driver,
filling out the CPUTIME stats. qemuDomainGetPercpuStats does this
and also filles out VCPUTIME stats.
Extend virCgroupGetPercpuStats to also report VCPUTIME stats if
nvcpupids is non-zero. In the LXC driver, we don't have cpupids.
In the QEMU driver, there is at least one cpupid for a running domain,
so the behavior shouldn't change for QEMU either.
Also rename getSumVcpuPercpuStats to virCgroupGetPercpuVcpuSum.
The current use of virStorageFileMetadata is awkward; to learn
some of the information about a child node, you have to read
fields in the parent node. This does not lend itself well to
modifying backing chains (whether inserting a new node in the
chain, or consolidating existing nodes); better would be to
learn about a child node directly in that node. This patch
sets up some new fields which contain redundant information,
although not necessarily in the final desired state for the
new fields (see the next patch for actual tests of what is there
now). Then later patches will do any refactoring necessary to
get the fields to their desired states, and update clients to
get the information from the new fields, so we can finally
delete the fields that are tracking information about the wrong
node.
More concretely, compare these three example backing chains:
good <- one
missing <- two
gluster://server/vol/img <- three
Pre-patch, querying the chains gives:
{ .backingStore = "/path/to/good",
.backingStoreRaw = "good",
.backingStoreIsFile = true,
.backingStoreFormat = VIR_STORAGE_FILE_RAW,
.backingMeta = {
.backingStore = NULL,
.backingStoreRaw = NULL,
.backingStoreIsFile = false,
.backingMeta = NULL,
}
}
{ .backingStore = NULL,
.backingStoreRaw = "missing",
.backingStoreIsFile = false,
.backingStoreFormat = VIR_STORAGE_FILE_NONE,
.backingMeta = NULL,
}
{ .backingStore = "gluster://server/vol/img",
.backingStoreRaw = NULL,
.backingStoreIsFile = false,
.backingStoreFormat = VIR_STORAGE_FILE_RAW,
.backingMeta = NULL,
}
Deciding whether to ignore a missing backing file (as in virsh
vol-dumpxml) or report an error (as in security manager sVirt
labeling) requires reading multiple fields. Plus, the format
is hard-coded to treat all network protocols as end-of-the-chain,
as if they were raw. By the end of this patch series, the goal
is to instead represent these three situations as:
{ .path = "one",
.canonPath = "/path/to/one",
.type = VIR_STORAGE_TYPE_FILE,
.format = VIR_STORAGE_FILE_QCOW2,
.backingStoreRaw = "good",
.backingMeta = {
.path = "good",
.canonPath = "/path/to/good",
.type = VIR_STORAGE_TYPE_FILE,
.format = VIR_STORAGE_FILE_RAW,
.backingStoreRaw = NULL,
.backingMeta = NULL,
}
}
{ .path = "two",
.canonPath = "/path/to/two",
.type = VIR_STORAGE_TYPE_FILE,
.format = VIR_STORAGE_FILE_QCOW2,
.backingStoreRaw = "missing",
.backingMeta = NULL,
}
{ .path = "three",
.canonPath = "/path/to/three",
.type = VIR_STORAGE_TYPE_FILE,
.format = VIR_STORAGE_FILE_QCOW2,
.backingStoreRaw = "gluster://server/vol/img",
.backingMeta = {
.path = "gluster://server/vol/img",
.canonPath = "gluster://server/vol/img",
.type = VIR_STORAGE_TYPE_NETWORK,
.format = VIR_STORAGE_FILE_RAW,
.backingStoreRaw = NULL,
.backingMeta = NULL,
}
}
or, for the second file, maybe also allowing:
{ .path = "two",
.canonPath = "/path/to/two",
.type = VIR_STORAGE_TYPE_FILE,
.format = VIR_STORAGE_FILE_QCOW2,
.backingStoreRaw = "missing",
.backingMeta = {
.path = "missing",
.canonPath = NULL,
.type = VIR_STORAGE_TYPE_NONE,
.format = VIR_STORAGE_FILE_NONE,
.backingStoreRaw = NULL,
.backingMeta = NULL,
}
}
* src/util/virstoragefile.h (_virStorageFileMetadata): Add
path, canonPath, relDir, type, and format fields. Reorder
existing fields, and add lots of comments.
* src/util/virstoragefile.c (virStorageFileFreeMetadata): Clean
new fields.
(virStorageFileGetMetadataInternal)
(virStorageFileGetMetadataFromFDInternal): Start populating new
fields.
Signed-off-by: Eric Blake <eblake@redhat.com>
Right now, we are allocating virStorageFileMetadata near the bottom
of the callchain, only after we have identified that we are visiting
a file (and not a network resource). I'm hoping to eventually
support parsing the backing chain from XML, where the backing chain
crawl then validates what was parsed rather than allocating a fresh
structure. Likewise, I'm working towards a setup where we have a
backing element even for networks. Both of these use cases are
easier to code if the allocation is hoisted earlier.
* src/util/virstoragefile.c (virStorageFileGetMetadataInternal)
(virStorageFileGetMetadataFromFDInternal): Change signature.
(virStorageFileGetMetadataFromBuf)
(virStorageFileGetMetadataRecurse, virStorageFileGetMetadata):
Update callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous patch started a separation of error messages
reported against the user-specified name, vs. tracking the
canonical path that was actually opened. This patch extends
that notion, by hoisting directory detection up front, passing
the canonical path through the entire call chain, and
simplifying lower-level functions that can now assume that
a canonical path and directory have been supplied.
* src/util/virstoragefile.c
(virStorageFileGetMetadataFromFDInternal)
(virStorageFileGetMetadataInternal): Add parameter, require
directory.
(virFindBackingFile): Require directory.
(virStorageFileGetMetadataFromFD): Pass canonical path.
(virStorageFileGetMetadataFromBuf): Likewise.
(virStorageFileGetMetadata): Determine initial directory.
Signed-off-by: Eric Blake <eblake@redhat.com>
Refactor the function to avoid multiple wrappers splitting identical
fields from the now common metadata struct.
The refactor is done by folding in the wrapper used for disk sources
which allows us to lookup secrets via the secret driver. This may allow
using stored secrets for snapshot disk images too in the future.
Now that we store all metadata about a storage image in a
virStorageSource struct let's use it also to store information needed by
the storage driver to access and do operations on the files.
https://bugzilla.redhat.com/show_bug.cgi?id=1024159
If adding a volume to a storage pool fails during the CreateXML or
CreateXMLFrom API's, we don't want to adjust the available and
allocation values for the storage pool during storageVolDelete
since we haven't adjusted the values for the create.
Refactor storageVolDelete() a bit to create a storageVolDeleteInternal()
which will handle the primary deletion activities. Add a parameter
updateMeta which will signify whether to update the values or not.
Adjust the calls from CreateXML and CreateXMLFrom to directly call the
DeleteInternal with the pool lock held. This does bypass the call
to virStorageVolDeleteEnsureACL().
While trying to refactor the backing file chain, I noticed that
if you have a self-referential qcow2 file via a relative name:
qemu-img create -f qcow2 loop 10M
qemu-img rebase -u -f qcow2 -F qcow2 -b loop loop
then libvirt was creating a chain 2 deep before realizing it
had hit a loop; furthermore, virStorageFileChainCheckBroken
was not identifying the chain as broken. With this patch,
the loop is detected when the chain is only 1 deep; still
enough for storage volume XML to display the file, but now
with a proper error report about where the loop was found.
This patch adds a parameter to virStorageFileGetMetadataRecurse,
so that errors at the top of the chain remain unchanged; messages
issued for backing files now use the name provided by the user
instead of the canonical name (for VDSM, which uses relative
symlinks to device mapper block devices, this is actually more
useful).
* src/util/virstoragefile.c (virStorageFileGetMetadataRecurse):
Add parameter, require canonical path up front. Mark chain
broken on OOM or loop detection.
(virStorageFileGetMetadata): Pass in canonical name.
Signed-off-by: Eric Blake <eblake@redhat.com>
Fix incorrect ATTRIBUTE_NONNULL usage introduced in 17b17565
which caused build failure:
bhyve/bhyve_driver.c:127:48: error: expected ')'
bhyveDriverGetCapabilities(bhyveConnPtr driver ATTRIBUTE_NONNULL)
^
bhyve/bhyve_driver.c:127:27: note: to match this '('
bhyveDriverGetCapabilities(bhyveConnPtr driver ATTRIBUTE_NONNULL)
Pushed under the build breaker rule.
Commit b9dd878f (util: make it easier to grab only regular command exit)
changed the call semantics of virCommandRun() and therefore of virRun()
too. But lxcCheckNetNsSupport() was not updated.
As consequence of this lxcCheckNetNsSupport always failed and broke LXC.
Signed-off-by: Richard Weinberger <richard@nod.at>
Now that we ditched our custom pthread impl for Win32, we can
use PTHREAD_MUTEX_INITIALIZER for static mutexes. This avoids
the need to use a virOnce one-time global initializer in a
number of places.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since it is an abbreviation, PCI should always be fully
capitalized or full lower case, never Pci.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since it is an abbreviation, USB should always be fully
capitalized or full lower case, never Usb.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since it is an abbreviation, SCSI should always be fully
capitalized or full lower case, never Scsi.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Functions virNetDevRestoreMacAddress() and virNetDevRestoreMacAddress()
allocate memory for variable @path using virAsprintf(), but they
haven't freed that memory before returning out.
Signed-off-by: Zhang bo <oscar.zhangbo@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
At the beginning of the function we gain a reference to the driver
capabilities. Then, we call format function (*) which if failed, unref
over caps is called. Then, at the end another unref occurs.
* - Moreover, the format was not called over gained caps, but over
privconn->caps directly which is not allowed anymore.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The driver passed as the only argument to the function should never be
NULL so there's no need to check it. After removing it, the whole
function collapses to a single line doing ref over driver
capabilities.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since b15a2bbd we have the new bhyve_capabilities.[ch] files.
However, the copyright is held by both Roman and Semihalf.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I noticed that the apparmor code could request metadata even
for a cdrom with no media, which would cause a memory leak of
the hash table used to look for loops in the backing chain.
But even before that, we blindly dereferenced the path for
printing a debug statement, so it is just better to enforce
that this is only used on non-NULL names.
* src/util/virstoragefile.c (virStorageFileGetMetadata): Assume
non-NULL path.
* src/util/virstoragefile.h: Annotate this.
* src/security/virt-aa-helper.c (get_files): Fix caller.
Signed-off-by: Eric Blake <eblake@redhat.com>
Other drivers in libvirt (e.g. network, qemu) will automatically
return the "inactive" (persistent configuration) XML of an object when
that object is inactive. The netcf backend of the interface driver
would always try to return the live status XML of the interface, even
when it was down. Although netcf does return valid XML in that case,
for bond interfaces it is missing almost all of its content, including
the <bond> subelement itself, leading to this error message from
"virsh iface-dumpxml" of a bond interface that is inactive:
error: XML error: bond interface misses the bond element
(this is because libvirt's validation of the XML returned by netcf
always requires a <bond> element be present).
This patch modifies the interface driver netcf backend to check if the
interface is inactive, and in that case always return the inactive XML
(which will always have a <bond> element, thus eliminating the error
message, as well as making operation more in line with other drivers.
This fixes the following bug:
https://bugzilla.redhat.com/show_bug.cgi?id=878394
I almost wrote a hash value free function that just called
VIR_FREE, then realized I couldn't be the first person to
do that. Sure enough, it was worth factoring into a common
helper routine.
* src/util/virhash.h (virHashValueFree): New function.
* src/util/virhash.c (virHashValueFree): Implement it.
* src/util/virobject.h (virObjectFreeHashData): New function.
* src/libvirt_private.syms (virhash.h, virobject.h): Export them.
* src/nwfilter/nwfilter_learnipaddr.c (virNWFilterLearnInit): Use
common function.
* src/qemu/qemu_capabilities.c (virQEMUCapsCacheNew): Likewise.
* src/qemu/qemu_command.c (qemuDomainCCWAddressSetCreate):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorGetBlockInfo): Likewise.
* src/qemu/qemu_process.c (qemuProcessWaitForMonitor): Likewise.
* src/util/virclosecallbacks.c (virCloseCallbacksNew): Likewise.
* src/util/virkeyfile.c (virKeyFileParseGroup): Likewise.
* tests/qemumonitorjsontest.c
(testQemuMonitorJSONqemuMonitorJSONGetBlockInfo): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Up until now the traffic control filters for the vNIC QoS were
matching only ip traffic. For egress traffic that was unnoticed
because the unmatched traffic would just go to the default htb class
and be shaped anyway. For ingress, though, since the policing of the
rate is done by the filter itself.
The problem is solved by changing protocol to all and making anything
match the filter.
Bug-Url: https://bugzilla.redhat.com/1084444
Signed-off-by: Antoni S. Puimedon <asegurap@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
nmdm is a FreeBSD driver which allows to create a pair of tty
devices one of which is passed to the guest and second is used
by the client.
This patch adds new 'nmdm' character device type. Its definition
looks this way:
<serial type='nmdm'>
<source master='/dev/nmdm0A' slave='/dev/nmdm0B'/>
</serial>
Master is passed to the hypervisior and slave is used for client
connection.
Also implement domainOpenConsole() for bhyve driver based on that.
Right now, virStorageFileMetadata tracks bool backingStoreIsFile
for whether the backing string specified in metadata can be
resolved as a file (covering both block and regular file
resources) or is treated as a network protocol. But when
merging this struct with virStorageSource, it will be easier
to just actually track which type of resource it is, as well
as have a reserved value for the case where the resource type
is unknown (or had an error during probing).
* src/util/virstoragefile.h (virStorageType): Add a placeholder
value, swap order to match similar public enum.
* src/util/virstoragefile.c (virStorage): Update string mapping.
* src/conf/domain_conf.c (virDomainDiskSourceParse)
(virDomainDiskDefParseXML, virDomainDiskDefFormat)
(virDomainDiskSourceFormat): Adjust clients.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefParseXML):
Likewise.
* src/qemu/qemu_driver.c
(qemuDomainSnapshotPrepareDiskExternalBackingInactive)
(qemuDomainSnapshotPrepareDiskExternalOverlayActive)
(qemuDomainSnapshotPrepareDiskExternalOverlayInactive)
(qemuDomainSnapshotPrepareDiskInternal)
(qemuDomainSnapshotCreateSingleDiskActive): Likewise.
* src/qemu/qemu_command.c (qemuGetDriveSourceString): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit id '18642d10' refactored the call to virCommandRunRegex()
inside a new function virStorageBackendFileSystemNetFindNFSPoolSources(),
but the cut-n-paste didn't remove the "&state". Now that state is passed
by reference, it results in a libvirtd core with a messages entry:
"...internal error: unknown storage pool type Unknow"
For example, the file /proc/cpuinfo for 24 cores PowerPC platform is larger than
the previous maximum size 2KB.
It will fail to start libvirtd with the error message as below:
virFileReadAll: Failed to read file '/proc/cpuinfo': Value too large for defined
data type
virSysinfoRead: internal error Failed to open /proc/cpuinfo
This patch defines CPUINFO_FILE_LEN as 10KB which is enough for most architectures.
Signed-off-by: Olivia Yin <Hong-Hua.Yin@freescale.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The XML config for a CDROM device can be without a source path,
indicating that there is no media present. Without this change
the libxl driver fails to start a guest in that case because
the libxl library checks for the LIBXL_DISK_FORMAT_EMPTY format
type and tries to stat the NULL pointer that gets passed on.
> libxl: error: libxl_device.c:265:libxl__device_disk_set_backend:
> Disk vdev=hdc failed to stat: (null): Bad address
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
There is a domain id in the virDomain structure as well as in the
virDomainObj structure. While the former can become stale the latter
is kept up to date. So it is safer to always (virDomainObjPtr)->def->id
internally.
This will fix issues seen when managing Xen guests through libvirt from
virt-manager (not being able to get domain info after define or reboot).
This was caused both though libxlDomainGetInfo() only but there were
a lot of places that might potentially cause issues, too.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Commit 5b3492fa aimed to fix this and caught one error but exposed
another one. When agent command is being executed and the thread
waiting for the reply is woken up by an event (e.g. EOF in case of
shutdown), the command finishes with no data (rxObject == NULL), but
no error is reported, since this might be desired by the caller
(e.g. suspend through agent). However, in other situations, when the
data are required (e.g. getting vCPUs), we proceed to getting desired
data out of the reply, but none of the virJSON*() functions works well
with NULLs. I chose the way of a new parameter for qemuAgentCommand()
function that specifies whether reply is required and behaves
according to that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1058149
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When looking up a net device by a MAC and PCI address, it is possible
that we've got a match on the MAC address but failed to match the
PCI address.
In that case, outputting just the MAC address can be confusing.
Partially resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=872028
Every caller checked the return value and logged an error
- one if no device with the specified MAC was found,
other if there were multiple devices matching the MAC address
(except for qemuDomainUpdateDeviceConfig which logged the same
message in both cases).
Move the error reporting into virDomainNetFindIdx, since in both cases,
we couldn't find one single match - it's just the error messages that
differ.
Currently VolOpen notifies the user of a potentially non-fatal failure by
returning -2 and logging a VIR_WARN or VIR_INFO. Unfortunately most
callers treat -2 as fatal but don't actually report any message with
the error APIs.
Rename the VOL_OPEN_ERROR flag to VOL_OPEN_NOERROR. If NOERROR is specified,
we preserve the current behavior of returning -2 (there's only one caller
that wants this).
However in the default case, only return -1, and actually use the error
APIs. Fix up a couple callers as a result.
Coverity complains about a possible leak of seclabel if
!sec_managers[i]->drv->domainGenSecurityLabel is true
and the seclabel might be overwritten by the next iteration
of the loop.
This leak should never happen, because every security driver
has domainGenSecurityLabel defined.
A future patch will merge virStorageFileMetadata and virStorageSource,
but I found it easier to do if both structs use the same information
for tracking whether a source file needs encryption keys.
* src/util/virstoragefile.h (_virStorageFileMetadata): Prepare
full encryption struct instead of just a bool.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Use transfer semantics.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
* src/util/virstoragefile.c (virStorageFileGetMetadataInternal):
Populate struct.
(virStorageFileFreeMetadata): Adjust clients.
* tests/virstoragetest.c (testStorageChain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that each virStorageSource can track allocation information,
and given that we already have the information without extra
syscalls, it's easier to just always populate the information
directly into the struct than it is to sometimes pass the address
of the struct members down the call chain.
* src/storage/storage_backend.h (virStorageBackendUpdateVolInfo)
(virStorageBackendUpdateVolTargetInfo)
(virStorageBackendUpdateVolTargetInfoFD): Update signature.
* src/storage/storage_backend.c (virStorageBackendUpdateVolInfo)
(virStorageBackendUpdateVolTargetInfo)
(virStorageBackendUpdateVolTargetInfoFD): Always populate struct
members instead.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskMakeDataVol): Update client.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget)
(virStorageBackendFileSystemRefresh)
(virStorageBackendFileSystemVolRefresh): Likewise.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalMakeVol): Likewise.
* src/storage/storage_backend_mpath.c
(virStorageBackendMpathNewVol): Likewise.
* src/storage/storage_backend_scsi.c
(virStorageBackendSCSINewLun): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
One of the features of qcow2 is that a wrapper file can have
more capacity than its backing file from the guest's perspective;
what's more, sparse files make tracking allocation of both
the active and backing file worthwhile. As such, it makes
more sense to show allocation numbers for each file in a chain,
and not just the top-level file. This sets up the fields for
the tracking, although it does not modify XML to display any
new information.
* src/util/virstoragefile.h (_virStorageSource): Add fields.
* src/conf/storage_conf.h (_virStorageVolDef): Drop redundant
fields.
* src/storage/storage_backend.c (virStorageBackendCreateBlockFrom)
(createRawFile, virStorageBackendCreateQemuImgCmd)
(virStorageBackendCreateQcowCreate): Update clients.
* src/storage/storage_driver.c (storageVolDelete)
(storageVolCreateXML, storageVolCreateXMLFrom, storageVolResize)
(storageVolWipeInternal, storageVolGetInfo): Likewise.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget)
(virStorageBackendFileSystemRefresh)
(virStorageBackendFileSystemVolResize)
(virStorageBackendFileSystemVolRefresh): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalMakeVol)
(virStorageBackendLogicalCreateVol): Likewise.
* src/storage/storage_backend_scsi.c
(virStorageBackendSCSINewLun): Likewise.
* src/storage/storage_backend_mpath.c
(virStorageBackendMpathNewVol): Likewise.
* src/storage/storage_backend_rbd.c
(volStorageBackendRBDRefreshVolInfo)
(virStorageBackendRBDCreateImage): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskMakeDataVol)
(virStorageBackendDiskCreateVol): Likewise.
* src/storage/storage_backend_sheepdog.c
(virStorageBackendSheepdogBuildVol)
(virStorageBackendSheepdogParseVdiList): Likewise.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
* src/conf/storage_conf.c (virStorageVolDefFormat)
(virStorageVolDefParseXML): Likewise.
* src/test/test_driver.c (testOpenVolumesForPool)
(testStorageVolCreateXML, testStorageVolCreateXMLFrom)
(testStorageVolDelete, testStorageVolGetInfo): Likewise.
* src/esx/esx_storage_backend_iscsi.c (esxStorageVolGetXMLDesc):
Likewise.
* src/esx/esx_storage_backend_vmfs.c (esxStorageVolGetXMLDesc)
(esxStorageVolCreateXML): Likewise.
* src/parallels/parallels_driver.c (parallelsAddHddByVolume):
Likewise.
* src/parallels/parallels_storage.c (parallelsDiskDescParseNode)
(parallelsStorageVolDefineXML, parallelsStorageVolCreateXMLFrom)
(parallelsStorageVolDefRemove, parallelsStorageVolGetInfo):
Likewise.
* src/vbox/vbox_tmpl.c (vboxStorageVolCreateXML)
(vboxStorageVolGetXMLDesc): Likewise.
* tests/storagebackendsheepdogtest.c (test_vdi_list_parser):
Likewise.
* src/phyp/phyp_driver.c (phypStorageVolCreateXML): Likewise.
A fairly smooth transition. And now that domain disks and
storage volumes share a common struct, it opens the doors for
a future patch to expose more details in the XML for both
objects.
* src/conf/storage_conf.h (_virStorageVolTarget): Delete.
(_virStorageVolDef): Use common type.
* src/conf/storage_conf.c (virStorageVolDefFree)
(virStorageVolTargetDefFormat): Update clients.
* src/storage/storage_backend.h: Likewise.
* src/storage/storage_backend.c
(virStorageBackendDetectBlockVolFormatFD)
(virStorageBackendUpdateVolTargetInfo)
(virStorageBackendUpdateVolTargetInfoFD): Likewise.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Another step towards unification of structures. While we might
not expose everything in XML via domain disk as we do for
storage volume pointer, both places want to deal with (at least
part of) the backing chain; therefore, moving towards a single
struct usable from both contexts will make the backing chain
code more reusable.
* src/conf/storage_conf.h (_virStoragePerms)
(virStorageTimestamps): Move...
* src/util/virstoragefile.h: ...here.
(_virStorageSource): Add more fields.
* src/util/virstoragefile.c (virStorageSourceClear): Clean
additional fields.
Signed-off-by: Eric Blake <eblake@redhat.com>
Some preparatory work before consolidating storage volume
structs with the rest of virstoragefile. Making these
changes allows a volume target to be much closer to (a
subset of) the virStorageSource struct.
Making perms be a pointer allows it to be optional if we
have a storage pool that doesn't expose permissions in a
way we can access. It also allows future patches to
optionally expose permissions details learned about a disk
image via domain <disk> listings, rather than just
limiting it to storage volume listings.
Disk partition types was only used by internal code to
control what type of partition to create when carving up
an MS-DOS partition table storage pool (and is not used
for GPT partition tables or other storage pools). It was
not exposed in volume XML, and as it is more closely
related to extent information of the overall block device
than it is to the <target> information describing the host
file. Besides, if we ever decide to expose it in XML down
the road, we can move it back as needed.
* src/conf/storage_conf.h (_virStorageVolTarget): Change perms to
pointer, enhance comments. Move partition type...
(_virStorageVolSource): ...here.
* src/conf/storage_conf.c (virStorageVolDefFree)
(virStorageVolDefParseXML, virStorageVolTargetDefFormat): Update
clients.
* src/storage/storage_backend_fs.c (createFileDir): Likewise.
* src/storage/storage_backend.c (virStorageBackendCreateBlockFrom)
(virStorageBackendCreateRaw, virStorageBackendCreateExecCommand)
(virStorageBackendUpdateVolTargetInfoFD): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalCreateVol): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskMakeDataVol)
(virStorageBackendDiskPartTypeToCreate): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that we have a dedicated type for representing a disk source,
we might as well parse and format directly into that type instead
of piecemeal into pointers to members of the type.
* src/conf/domain_conf.h (virDomainDiskSourceDefFormatInternal)
(virDomainDiskSourceDefParse): Rename...
(virDomainDiskSourceFormat, virDomainDiskSourceParse): ...and
compress signatures.
* src/conf/domain_conf.c (virDomainDiskSourceParse)
(virDomainDiskSourceFormat): Rewrite to use common struct.
(virDomainDiskSourceDefFormat): Delete.
(virDomainDiskDefParseXML, virDomainDiskDefFormat): Update
callers.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefParseXML)
(virDomainSnapshotDiskDefFormat): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The phyp code claims that it wants a non-zero value, but actually
enforces a capacity of zero. It has been this way since commit
ebc46fe in June 2010. Bummer that it has my name as the committer
- I guess I should have been much more stubborn about not blindly
taking someone else's 1600-line patch.
* src/phyp/phyp_driver.c (phypStorageVolCreateXML): Use correct
logic.
Signed-off-by: Eric Blake <eblake@redhat.com>
On all the places where qemuAgentComand() was called, we did a check
for errors in the reply. Unfortunately, some of the places called
qemuAgentCheckError() without checking for non-null reply which might
have resulted in a crash.
So this patch makes the error-checking part of qemuAgentCommand()
itself, which:
a) makes it look better,
b) makes the check mandatory and, most importantly,
c) checks for the errors if and only if it is appropriate.
This actually fixes a potential crashers when qemuAgentComand()
returned 0, but reply was NULL. Having said that, it *should* fix the
following bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1058149
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Noticed during my work on storage struct cleanups.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskPartBoundaries): Fix spelling errors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that we have a common struct, it's time to start using it!
Since external snapshots make a longer backing chain, it is
only natural to use the same struct for the file created by
the snapshot as what we use for <domain> disks.
* src/conf/snapshot_conf.h (_virDomainSnapshotDiskDef): Use common
struct instead of open-coded duplicate fields.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefClear)
(virDomainSnapshotDiskDefParseXML, virDomainSnapshotAlignDisks)
(virDomainSnapshotDiskDefFormat)
(virDomainSnapshotDiskGetActualType): Adjust clients.
* src/qemu/qemu_conf.c (qemuTranslateSnapshotDiskSourcePool):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskGetSourceString)
(qemuDomainSnapshotCreateInactiveExternal)
(qemuDomainSnapshotPrepareDiskExternalOverlayActive)
(qemuDomainSnapshotPrepareDiskExternal)
(qemuDomainSnapshotPrepare)
(qemuDomainSnapshotCreateSingleDiskActive): Likewise.
* src/storage/storage_driver.c
(virStorageFileInitFromSnapshotDef): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Move some functions out of domain_conf for use in the next
patch where snapshot starts to directly use structs in
virstoragefile.
* src/conf/domain_conf.c (virDomainDiskDefFree)
(virDomainDiskSourcePoolDefParse): Adjust callers.
(virDomainDiskSourceDefClear, virDomainDiskSourcePoolDefFree)
(virDomainDiskAuthClear): Move...
* src/util/virstoragefile.c (virStorageSourceClear)
(virStorageSourcePoolDefFree, virStorageSourceAuthClear): ...and
rename.
* src/conf/domain_conf.h (virDomainDiskAuthClear): Drop
declaration.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Adjust
caller.
* src/util/virstoragefile.h: Declare them.
* src/libvirt_private.syms (virstoragefile.h): Export them.
Signed-off-by: Eric Blake <eblake@redhat.com>
The only remaining reason that virt-login-shell was trying to
link against virstoragefile was because of a call to
virStorageFileFormatTypeToString when spawning a qemu-nbd
process - but setuid processes shouldn't be spawning qemu-nbd.
* src/util/virfile.c (virFileLoopDeviceAssociate)
(virFileNBDDeviceAssociate): Cripple in setuid builds.
* src/Makefile.am (libvirt_setuid_rpc_client_la_SOURCES):
Drop virstoragefile from the list.
Signed-off-by: Eric Blake <eblake@redhat.com>
The code in virstoragefile.c is getting more complex as I
consolidate backing chain handling code. But for the setuid
virt-login-shell, we don't need to crawl backing chains. It's
easier to audit things for setuid security if there are fewer
files involved, so this patch moves the one function that
virFileOpen() was actually relying on to also live in virfile.c.
* src/util/virstoragefile.c (virStorageFileIsSharedFS)
(virStorageFileIsSharedFSType): Move...
* src/util/virfile.c (virFileIsSharedFS, virFileIsSharedFSType):
...to here, and rename.
(virFileOpenAs): Update caller.
* src/security/security_selinux.c
(virSecuritySELinuxSetFileconHelper)
(virSecuritySELinuxSetSecurityAllLabel)
(virSecuritySELinuxRestoreSecurityImageLabelInt): Likewise.
* src/security/security_dac.c
(virSecurityDACRestoreSecurityImageLabelInt): Likewise.
* src/qemu/qemu_driver.c (qemuOpenFileAs): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsSafe): Likewise.
* src/util/virstoragefile.h: Adjust declarations.
* src/util/virfile.h: Likewise.
* src/libvirt_private.syms (virfile.h, virstoragefile.h): Move
symbols as appropriate.
Signed-off-by: Eric Blake <eblake@redhat.com>
With this patch, all information related to a host resource in
a storage file backing chain now lives in util/virstoragefile.h.
The next step will be to consolidate various places that have
been tracking backing chain details to all use a common struct.
The changes to tools/Makefile.am were made necessary by the
fact that virstorageencryption includes uses of libxml, and is
now pulled in by inclusion from virstoragefile.h. No
additional libraries are linked into the final image, and in
comparison, the build of the setuid library in src/Makefile.am
already was using LIBXML_CFLAGS via AM_CFLAGS.
* src/conf/domain_conf.h (virDomainDiskSourceDef): Move...
* src/util/virstoragefile.h (virStorageSource): ...and rename.
* src/conf/domain_conf.c (virDomainDiskSourceDefClear)
(virDomainDiskAuthClear): Adjust clients.
* tools/Makefile.am (virt_login_shell_CFLAGS)
(virt_host_validate_CFLAGS): Add libxml headers.
Signed-off-by: Eric Blake <eblake@redhat.com>
This one is a relatively easy move. We don't ever convert the
enum to or from strings (it is inferred from other elements in
the xml, rather than directly represented).
* src/conf/domain_conf.h (virDomainDiskSecretType): Move...
* src/util/virstoragefile.h (virStorageSecreteType): ...and
rename.
* src/conf/domain_conf.c (virDomainDiskSecretType): Drop unused
enum conversion.
(virDomainDiskAuthClear, virDomainDiskDefParseXML)
(virDomainDiskDefFormat): Adjust clients.
* src/qemu/qemu_command.c (qemuGetSecretString): Likewise.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePoolAuth):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Another struct being moved to util. This one doesn't have as
much use yet, thankfully.
* src/conf/domain_conf.h (virDomainDiskSourcePoolMode)
(virDomainDiskSourcePoolDef): Move...
* src/util/virstoragefile.h (virStorageSourcePoolMode)
(virStorageSourcePoolDef): ...and rename.
* src/conf/domain_conf.c (virDomainDiskSourcePoolDefFree)
(virDomainDiskSourceDefClear, virDomainDiskSourcePoolDefParse)
(virDomainDiskDefParseXML, virDomainDiskSourceDefParse)
(virDomainDiskSourceDefFormatInternal)
(virDomainDiskDefForeachPath, virDomainDiskSourceIsBlockType):
Adjust clients.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Likewise.
* src/libvirt_private.syms (domain_conf.h): Move symbols...
(virstoragefile.h): ...as appropriate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Encryption keys can be associated with each source file in a
backing chain; as such, this file belongs more in util/ where
it can be used by virstoragefile.h.
* src/conf/storage_encryption_conf.h: Rename...
* src/util/virstorageencryption.h: ...to this.
* src/conf/storage_encryption_conf.c: Rename...
* src/util/virstorageencryption.c: ...to this.
* src/Makefile.am (ENCRYPTION_CONF_SOURCES, CONF_SOURCES)
(UTIL_SOURCES): Update to new file names.
* src/libvirt_private.syms: Likewise.
* src/conf/domain_conf.h: Update client.
* src/conf/storage_conf.h: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
In order to reuse the newly-created host-side disk struct in
the virstoragefile backing chain code, I first have to move
it to util/. This starts the process, by first moving the
security label structures.
* src/conf/domain_conf.h (virDomainDefGenSecurityLabelDef)
(virDomainDiskDefGenSecurityLabelDef, virSecurityLabelDefFree)
(virSecurityDeviceLabelDefFree, virSecurityLabelDef)
(virSecurityDeviceLabelDef): Move...
* src/util/virseclabel.h: ...to new file.
(virSecurityLabelDefNew, virSecurityDeviceLabelDefNew): Rename the
GenSecurity functions.
* src/qemu/qemu_process.c (qemuProcessAttach): Adjust callers.
* src/security/security_manager.c (virSecurityManagerGenLabel):
Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxSetSecurityFileLabel): Likewise.
* src/util/virseclabel.c: New file.
* src/conf/domain_conf.c: Move security code, and fix fallout.
* src/Makefile.am (UTIL_SOURCES): Build new file.
* src/libvirt_private.syms (domain_conf.h): Move symbols...
(virseclabel.h): ...to new section.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1072714
Use the "gluster" command line tool to retrieve information about remote
volumes on a gluster server to allow storage pool source lookup.
Unfortunately gluster doesn't provide a management library so that we
could use that directly, instead the RPC calls are hardcoded in the
command line tool.
Extract the NFS related stuff into a separate function and tidy up the
rest of the code so we can reuse it to add gluster backend detection.
Additionally avoid reporting of errors from "showmount" and return an
empty source list instead. This will help when adding other detection
backends.
According to our documentation the "key" value has the following
meaning: "Providing an identifier for the volume which identifies a
single volume." The currently used keys for gluster volumes consist of
the gluster volume name and file path. This can't be considered unique
as a different storage server can serve a volume with the same name.
Unfortunately I wasn't able to figure out a way to retrieve the gluster
volume UUID which would avoid the possibility of having two distinct
keys identifying a single volume.
Use the full URI as the key for the volume to avoid the more critical
ambiguity problem and document the possible change to UUID.
On failures, virBhyveProcessStart() does not cleanup network
interfaces that could be created by virBhyveProcessBuildBhyveCmd(),
which results in a leaked tap device.
To fix that, extract network cleanup code to bhyveNetCleanup()
and use it in cleanup stage of virBhyveProcessStart().
When virStorageFileGetMetadata is called with NULL path argument, the
invalid pointer boils down through the recursive worker and is caught by
virHashAddEntry which is thankfully resistant to NULL arguments. As it
doesn't make sense to pursue backing chains of NULL volumes, exit
earlier.
This was noticed in the virt-aahelper-test with a slightly modified
codebase.
The libgfapi function glfs_fini doesn't tolerate NULL pointers. Add a
check on the error paths as it's possible to crash libvirtd if the
gluster volume can't be initialized.
virNodeDeviceListCaps will always return empty for a pci nodedevice,
actually it should return 'pci'.
It is because the loop variable ncaps isn't increased.
Introduced by commit be2636f.
https://bugzilla.redhat.com/show_bug.cgi?id=1081932
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
See lp#1276719 for the bug description. As virt-aa-helper doesn't know
the VFIO groups to use for the guest, allow access to all
/dev/vfio/[0-9]* and /dev/vfio/vfio files if there is a potential need
for vfio
Signed-off-by: Eric Blake <eblake@redhat.com>
While running qemucaps2xmltest, it was found that valgrind pointed out
the following memory leaks:
==29896== 0 bytes in 1 blocks are definitely lost in loss record 1 of 65
==29896== at 0x4A0577B: calloc (vg_replace_malloc.c:593)
==29896== by 0x4C6B45E: virAllocN (viralloc.c:191)
==29896== by 0x4232A9: virQEMUCapsGetMachineTypesCaps (qemu_capabilities.c:1999)
==29896== by 0x4234E7: virQEMUCapsInitGuestFromBinary (qemu_capabilities.c:789)
==29896== by 0x41F10B: testQemuCapsXML (qemucaps2xmltest.c:118)
==29896== by 0x41FFD1: virtTestRun (testutils.c:201)
==29896== by 0x41EE7A: mymain (qemucaps2xmltest.c:203)
==29896== by 0x42074D: virtTestMain (testutils.c:789)
==29896== by 0x3E6CE1ED1C: (below main) (libc-start.c:226)
==29896==
==29896== 0 bytes in 1 blocks are definitely lost in loss record 2 of 65
==29896== at 0x4A0577B: calloc (vg_replace_malloc.c:593)
==29896== by 0x4C6B45E: virAllocN (viralloc.c:191)
==29896== by 0x4232A9: virQEMUCapsGetMachineTypesCaps (qemu_capabilities.c:1999)
==29896== by 0x4234E7: virQEMUCapsInitGuestFromBinary (qemu_capabilities.c:789)
==29896== by 0x41F10B: testQemuCapsXML (qemucaps2xmltest.c:118)
==29896== by 0x41FFD1: virtTestRun (testutils.c:201)
==29896== by 0x41EEA3: mymain (qemucaps2xmltest.c:204)
==29896== by 0x42074D: virtTestMain (testutils.c:789)
==29896== by 0x3E6CE1ED1C: (below main) (libc-start.c:226)
Signed-off-by: Eric Blake <eblake@redhat.com>
To ease mocking for bhyve unit tests move virBhyveTapGetRealDeviceName()
out of bhyve_command.c to virnetdevtap and rename it to
virNetDevTapGetRealDeviceName().
A patch submitted by Steven Malin last week pointed out a problem with
libvirt's DNS SRV record configuration:
https://www.redhat.com/archives/libvir-list/2014-March/msg00536.html
When searching for that message later, I found another series that had
been posted by Guannan Ren back in 2012 that somehow slipped between
the cracks:
https://www.redhat.com/archives/libvir-list/2012-July/msg00236.html
That patch was very much out of date, but also pointed out some real
problems.
This patch fixes all the noted problems by refactoring
virNetworkDNSSrvDefParseXML() and networkDnsmasqConfContents(), then
verifies those fixes by added several new records to the test case.
Problems fixed:
* both service and protocol now have an underscore ("_") prepended on
the commandline, as required by RFC2782.
<srv service='sip' protocol='udp' domain='example.com'
target='tests.example.com' port='5060' priority='10'
weight='150'/>
before: srv-host=sip.udp.example.com,tests.example.com,5060,10,150
after: srv-host=_sip._udp.example.com,tests.example.com,5060,10,150
* if "domain" wasn't specified in the <srv> element, the extra
trailing "." will no longer be added to the dnsmasq commandline.
<srv service='sip' protocol='udp' target='tests.example.com'
port='5060' priority='10' weight='150'/>
before: srv-host=sip.udp.,tests.example.com,5060,10,150
after: srv-host=_sip._udp,tests.example.com,5060,10,150
* when optional attributes aren't specified, the separating comma is
also now not placed on the dnsmasq commandline. If optional
attributes in the middle of the line are not specified, they are
replaced with a default value in the commandline (1 for port, 0 for
priority and weight).
<srv service='sip' protocol='udp' target='tests.example.com'
port='5060'/>
before: srv-host=sip.udp.,tests.example.com,5060,,
after: srv-host=_sip._udp,tests.example.com,5060
(actually the would have generated an error, because "optional"
attributes weren't really optional.)
* The allowed characters for both service and protocol are now limited
to alphanumerics, plus a few special characters that are found in
existing names in /etc/services and /etc/protocols. (One exception
is that both of these files contain names with an embedded ".", but
"." can't be used in these fields of an SRV record because it is
used as a field separator and there is no method to escape a "."
into a field.) (Previously only the strings "tcp" and "udp" were
allowed for protocol, but this restriction has been removed, since
RFC2782 specifically says that it isn't limited to those, and that
anyway it is case insensitive.)
* the "domain" attribute is no longer required in order to recognize
the port, priority, and weight attributes during parsing. Only
"target" is required for this.
* if "target" isn't specified, port, priority, and weight are not
allowed (since they are meaningless - an empty target means "this
service is *not available* for this domain").
* port, priority, and weight are now truly optional, as the comments
originally suggested, but which was not actually true.
In all other drivers we are doing so. Moreover, we don't want to parse
runtime information in attach (even if the attach is meant as live)
because we are generating the runtime info ourselves. We can't trust
users they supply sane values anyway.
==1140== 9 bytes in 1 blocks are definitely lost in loss record 72 of 1,151
==1140== at 0x4A06C2B: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==1140== by 0x623C758: xmlStrndup (in /usr/lib64/libxml2.so.2.9.1)
==1140== by 0x50FD763: virXMLPropString (virxml.c:483)
==1140== by 0x510F8B7: virDomainDeviceInfoParseXML (domain_conf.c:3685)
==1140== by 0x511ACFD: virDomainChrDefParseXML (domain_conf.c:7535)
==1140== by 0x5121D13: virDomainDeviceDefParse (domain_conf.c:9918)
==1140== by 0x13AE6313: qemuDomainAttachDeviceFlags (qemu_driver.c:6926)
==1140== by 0x13AE65FA: qemuDomainAttachDevice (qemu_driver.c:7005)
==1140== by 0x51C77DA: virDomainAttachDevice (libvirt.c:10231)
==1140== by 0x127FDD: remoteDispatchDomainAttachDevice (remote_dispatch.h:2404)
==1140== by 0x127EC5: remoteDispatchDomainAttachDeviceHelper (remote_dispatch.h:2382)
==1140== by 0x5241F81: virNetServerProgramDispatchCall (virnetserverprogram.c:437)
When doing live attach, we are passing the inactive definition anyway
since we are passing the result of virDomainDeviceDefCopy() which does
inactive copy by default.
Moreover, we are doing the same mistake in qemuhotplugtest.
Just a side note - it makes perfect sense to parse the runtime info
like alias in qemuDomainDetachDevice and qemuDomainUpdateDeviceFlags()
as in some cases the only difference to distinguish two devices can be
just their alias.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds an element to QEMU's capability XML, to
show if the underlying QEMU binary supports the live disk
snapshotting or not.
This allows any client to know ahead of time if the feature
is available.
Without this information available, the only way to check
for the snapshot support is to request one and check for
errors.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Currently, the Linux kernel treats values of '0' and '1' as
the minimum of 2. Values larger than the maximum are changed
to the maximum.
Re-reading the shares value after setting it reflects this in
the live domain XML.
Currently, <cputune><shares>0</shares></cputune> is treated
as if it were not specified.
Treat is as a valid value if it was explicitly specified
and write it to the cgroups.
Recent changes to the module seemed to have caused Coverity to find a new
issue regarding the failure to check the return from a sendmsg. The code
doesn't seem to care about the return status, so just added an ignore_value
to keep Coverity quiet.
qemuDomainSetSchedulerParametersFlags() calls virQEMUDriverGetConfig() twice
and makes the reference counter leak. This removes redundant call.
Problem introduced in commit 45ad1ad
Signed-off-by: Eric Blake <eblake@redhat.com>
We use virBhyveTapGetRealDeviceName() to map network interface name
to a real device path, trying to open possible devices and getting
names by ioctl.
Make it skip devices that fail to open with EBUSY because they're
most likely already used by other VMs.
Commit d9f19c30d0 moved a lot of the
configuration setup into libxlDriverConfigNew().
However that tries to create the libxl/libxl-driver.log before the
libxl directory gets created in libxlStateInitialize().
This causes the daemon to fail on systems that have not had the directory
created before.
Move the code to create the libxl directory into libxlDriverConfigNew().
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
https://bugzilla.redhat.com/show_bug.cgi?id=905282https://bugzilla.redhat.com/show_bug.cgi?id=967494
When lock failure is detected by sanlock, our sanlock_helper kill script
will try to restart (shutdown followed by start) the affected domain
when RESTART action is configured for it. While shutting down kills QEMU
and removes all its leases (which is what sanlock wants to happen),
trying to start it again just hangs because libvirt tries reacquire the
locks in the failed lock space. Hence, this action cannot be supported
by sanlock driver.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=905280https://bugzilla.redhat.com/show_bug.cgi?id=967493
Sanlock expects that the configured kill script either kills the PID on
lock failure or removes all locks the PID owns. If none of the two
options happen, sanlock will reboot the host. Although IGNORE action is
supposed to ignore the request to kill the PID or remove all leases,
it's certainly not designed to cause the host to be rebooted. That said,
IGNORE action is incompatible with sanlock and should be forbidden by
libvirt.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Some of the function attributes marked as nonnull actually explicitly
handle the arguments for NULL. All changed functions handle missing
"initiatoriqn" argument well and virISCSIScanTargets also handles well
if the return pointers are missing. Remove some of the liberaly used
ATTRIBUTE_NONNULLs as coverity and possibly other compilers that honor
the attribute fail to compile the code.
Flaw introduced in commit 5e1d5dde
This patch adds qemuMonitorGetDumpGuestMemoryCapability, which is used to check
whether the specified dump-guest-memory format is supported by qemu.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
--memory-only option is introduced without compression supported. Now qemu
has support for dumping domain's memory in kdump-compressed format. This
patch adds a new virDomainCoreDumpWithFormat API, so that the format in
which qemu dumps domain's memory can be specified.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
It's finally time to start tracking disk backing chains in
<domain> XML. The first step is to start refactoring code
so that we have an object more convenient for representing
each host source resource in the context of a single guest
<disk>. Ultimately, I plan to move the new type into src/util
where it can be reused by virStorageFile, but to make the
transition easier to review, this patch just creates the
new type then fixes everything until it compiles again.
* src/conf/domain_conf.h (_virDomainDiskDef): Split...
(_virDomainDiskSourceDef): ...to new struct.
(virDomainDiskAuthClear): Use new type.
* src/conf/domain_conf.c (virDomainDiskDefFree): Split...
(virDomainDiskSourceDefClear): ...to new function.
(virDomainDiskGetType, virDomainDiskSetType)
(virDomainDiskGetSource, virDomainDiskSetSource)
(virDomainDiskGetDriver, virDomainDiskSetDriver)
(virDomainDiskGetFormat, virDomainDiskSetFormat)
(virDomainDiskAuthClear, virDomainDiskGetActualType)
(virDomainDiskDefParseXML, virDomainDiskSourceDefFormat)
(virDomainDiskDefFormat, virDomainDiskDefForeachPath)
(virDomainDiskDefGetSecurityLabelDef)
(virDomainDiskSourceIsBlockType): Adjust all users.
* src/lxc/lxc_controller.c (virLXCControllerSetupDisk):
Likewise.
* src/lxc/lxc_driver.c (lxcDomainAttachDeviceMknodHelper):
Likewise.
* src/qemu/qemu_command.c (qemuAddRBDHost, qemuParseRBDString)
(qemuParseDriveURIString, qemuParseGlusterString)
(qemuParseISCSIString, qemuParseNBDString)
(qemuDomainDiskGetSourceString, qemuBuildDriveStr)
(qemuBuildCommandLine, qemuParseCommandLineDisk)
(qemuParseCommandLine): Likewise.
* src/qemu/qemu_conf.c (qemuCheckSharedDevice)
(qemuAddISCSIPoolSourceHost, qemuTranslateDiskSourcePool):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainUpdateDeviceConfig)
(qemuDomainPrepareDiskChainElement)
(qemuDomainSnapshotCreateInactiveExternal)
(qemuDomainSnapshotPrepareDiskExternalBackingInactive)
(qemuDomainSnapshotPrepareDiskInternal)
(qemuDomainSnapshotPrepare)
(qemuDomainSnapshotCreateSingleDiskActive)
(qemuDomainSnapshotUndoSingleDiskActive)
(qemuDomainBlockPivot, qemuDomainBlockJobImpl)
(qemuDomainBlockCopy, qemuDomainBlockCommit): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsSafe): Likewise.
* src/qemu/qemu_process.c (qemuProcessGetVolumeQcowPassphrase)
(qemuProcessInitPasswords): Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxSetSecurityFileLabel): Likewise.
* src/storage/storage_driver.c (virStorageFileInitFromDiskDef):
Likewise.
* tests/securityselinuxlabeltest.c (testSELinuxLoadDef):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Part of a series of cleanups to use new accessor methods.
* src/xenxs/xen_sxpr.c (xenParseSxprDisks, xenParseSxpr)
(xenFormatSxprDisk, xenFormatSxpr): Use accessors.
* src/xenxs/xen_xm.c (xenParseXM, xenFormatXMDisk, xenFormatXM):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Part of a series of cleanups to use new accessor methods.
* src/xen/xend_internal.c (virDomainXMLDevID): Use accessors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Part of a series of cleanups to use new accessor methods.
* src/vmx/vmx.c (virVMXHandleLegacySCSIDiskDriverName)
(virVMXParseDisk, virVMXFormatDisk, virVMXFormatFloppy): Use
accessors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Part of a series of cleanups to use new accessor methods.
* src/vmware/vmware_conf.c (vmwareVmxPath): Use accessors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Part of a series of cleanups to use new accessor methods.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc, vboxAttachDrives)
(vboxDomainAttachDeviceImpl, vboxDomainDetachDevice): Use
accessors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Part of a series of cleanups to use new accessor methods.
* src/uml/uml_conf.c (umlBuildCommandLine): Use accessors.
* src/uml/uml_driver.c (umlDomainAttachUmlDisk): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Part of a series of cleanups to use new accessor methods.
* src/security/security_dac.c (virSecurityDACSetSecurityImageLabel)
(virSecurityDACRestoreSecurityImageLabelInt)
(virSecurityDACSetSecurityAllLabel): Use accessors.
* src/security/security_selinux.c
(virSecuritySELinuxRestoreSecurityImageLabelInt)
(virSecuritySELinuxSetSecurityImageLabel)
(virSecuritySELinuxSetSecurityAllLabel): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Part of a series of cleanups to use new accessor methods.
* src/phyp/phyp_driver.c (phypDomainAttachDevice, phypBuildLpar):
Use accessors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Part of a series of cleanups to use new accessor methods.
* src/parallels/parallels_driver.c (parallelsGetHddInfo)
(parallelsAddHdd, parallelsApplyDisksParams, parallelsCreateVm):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Part of a series of cleanups to use new accessor methods.
* src/lxc/lxc_cgroup.c (virLXCCgroupSetupDeviceACL): Use
accessors.
* src/lxc/lxc_controller.c (virLXCControllerSetupLoopDeviceDisk)
(virLXCControllerSetupNBDDeviceDisk)
(virLXCControllerSetupLoopDevices, virLXCControllerSetupDisk):
Likewise.
* src/lxc/lxc_driver.c (lxcDomainAttachDeviceDiskLive)
(lxcDomainDetachDeviceDiskLive): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Part of a series of cleanups to use new accessor methods.
* src/locking/domain_lock.c (virDomainLockManagerAddDisk): Use
accessors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Part of a series of cleanups to use new accessor methods.
* src/libxl/libxl_conf.c (libxlMakeDisk): Use accessors.
* src/libxl/libxl_driver.c (libxlDomainChangeEjectableMedia)
(libxlDomainAttachDeviceDiskLive): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Part of a series of cleanups to use new accessor methods.
* src/esx/esx_driver.c (esxAutodetectSCSIControllerModel)
(esxDomainDefineXML): Use accessors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Part of a series of cleanups to use new accessor methods.
* src/bhyve/bhyve_command.c (bhyveBuildDiskArgStr)
(virBhyveProcessBuildLoadCmd): Use accessors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Part of a series of cleanups to use new accessor methods.
Several places in domain_conf.c still open-code raw field access,
but that code will be touched later with the diskDef struct split
so I'm avoiding churn here.
* src/conf/domain_audit.c (virDomainAuditStart): Use accessors.
* src/conf/domain_conf.c (virDomainDiskIndexByName)
(virDomainDiskPathByName, virDomainDiskDefForeachPath)
(virDomainDiskSourceIsBlockType): Likewise.
* src/conf/snapshot_conf.c (virDomainSnapshotAlignDisks):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
A future patch will split virDomainDiskDef, in order to track
multiple host resources per guest <disk>. To reduce the size
of that patch, I've factored out the four most common accesses
into functions, so that I can incrementally upgrade the code
base to use the accessors, and so that code that doesn't care
about the distinction of per-file details won't have to be
changed when the struct changes.
* src/conf/domain_conf.h (virDomainDiskGetType)
(virDomainDiskSetType, virDomainDiskGetSource)
(virDomainDiskSetSource, virDomainDiskGetDriver)
(virDomainDiskSetDriver, virDomainDiskGetFormat)
(virDomainDiskSetFormat): New prototypes.
* src/conf/domain_conf.c (virDomainDiskGetType)
(virDomainDiskSetType, virDomainDiskGetSource)
(virDomainDiskSetSource, virDomainDiskGetDriver)
(virDomainDiskSetDriver, virDomainDiskGetFormat)
(virDomainDiskSetFormat): Implement them.
* src/libvirt_private.syms (domain_conf.h): Export them.
Signed-off-by: Eric Blake <eblake@redhat.com>
While writing disk source refactoring, I discovered that conversion
from XML to vmware modified the disk source in place; if the same
code is reached twice, the second call behaves differently because
the first call didn't clean up its mess.
* src/vmware/vmware_conf.c (vmwareParsePath): Avoid munging input
string.
* src/vmware/vmware_conf.h (vmwareParsePath): Make static.
Signed-off-by: Eric Blake <eblake@redhat.com>
It's easy to shed the daemon these days. With this XML snippet:
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/some/dummy/path/test.bin'>
<seclabel model='dac' relabel='no'/>
</source>
<target dev='vdb' bus='virtio'/>
<readonly/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</disk>
I get the SIGSEGV when starting the domain. The thing is, when
starting a domain, we check for its disk presence. For some reason,
when determining the disk chain, we parse the <seclabel/> (don't ask
me why). However, there's no label attribute in the XML, so we end up
calling virParseOwnershipIds() over NULL string:
[Switching to Thread 0x7ffff10c4700 (LWP 30956)]
__strchr_sse42 () at ../sysdeps/x86_64/multiarch/strchr.S:136
136 ../sysdeps/x86_64/multiarch/strchr.S: No such file or directory.
(gdb) bt
#0 __strchr_sse42 () at ../sysdeps/x86_64/multiarch/strchr.S:136
#1 0x00007ffff749f800 in virParseOwnershipIds (label=0x0, uidPtr=uidPtr@entry=0x7ffff10c2df0, gidPtr=gidPtr@entry=0x7ffff10c2df4) at util/virutil.c:2115
#2 0x00007fffe929f006 in qemuDomainGetImageIds (gid=0x7ffff10c2df4, uid=0x7ffff10c2df0, disk=0x7fffe40cb000, vm=0x7fffe40a6410, cfg=0x7fffe409ae00) at qemu/qemu_domain.c:2385
#3 qemuDomainDetermineDiskChain (driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, disk=disk@entry=0x7fffe40cb000, force=force@entry=false) at qemu/qemu_domain.c:2414
#4 0x00007fffe929f128 in qemuDomainCheckDiskPresence (driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, cold_boot=cold_boot@entry=true) at qemu/qemu_domain.c:2250
#5 0x00007fffe92b6fc8 in qemuProcessStart (conn=conn@entry=0x7fffd4000b60, driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, migrateFrom=migrateFrom@entry=0x0, stdin_fd=stdin_fd@entry=-1, stdin_path=stdin_path@entry=0x0, snapshot=snapshot@entry=0x0,
vmop=vmop@entry=VIR_NETDEV_VPORT_PROFILE_OP_CREATE, flags=flags@entry=1) at qemu/qemu_process.c:3813
#6 0x00007fffe93087e8 in qemuDomainObjStart (conn=0x7fffd4000b60, driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, flags=flags@entry=0) at qemu/qemu_driver.c:6051
#7 0x00007fffe9308e32 in qemuDomainCreateWithFlags (dom=0x7fffcc000d50, flags=0) at qemu/qemu_driver.c:6105
#8 0x00007ffff753c5cc in virDomainCreate (domain=domain@entry=0x7fffcc000d50) at libvirt.c:8861
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add virFDStreamOpenPTY() function which is a wrapper around
virFDStreamOpenFileInternal() with putting the device it opens into a
raw mode.
Make virChrdevOpen() use virFDStreamOpenPTY() for
VIR_DOMAIN_CHR_TYPE_PTY devices.
This fixes mangled console output when libvirt runs on FreeBSD as it
requires device it opens to be placed into a raw mode explicitly.
Busy enterprise workloads hosted on large sized VM's tend to dirty
memory faster than the transfer rate achieved via live guest migration.
Despite some good recent improvements (& using dedicated 10Gig NICs
between hosts) the live migration may NOT converge.
Recently support was added in qemu (version 1.6) to allow a user to
choose if they wish to force convergence of their migration via a
new migration capability : "auto-converge". This feature allows for qemu
to auto-detect lack of convergence and trigger a throttle-down of the
VCPUs.
This patch includes the libvirt support needed to trigger this
feature. (Testing is in progress)
Signed-off-by: Chegu Vinod <chegu_vinod@hp.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When I start multi VMs coincidently and any of the cgroup directories
named machine doesn't exist. There's a chance that VM start failed because
of creating directory failed:
Unable to initialize /machine cgroup: File exists
When the errno returned by mkdir in virCgroupMakeGroup is EEXIST,
we should pass it through and continue to start the VM.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
The caller may not want all DBus error conditions to be turned
into libvirt errors, so provide a way for the caller to get
back the full DBusError object. They can then check the errors
and only report those that they consider to be fatal.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the DBus helper APIs require the values for an array
to be passed inline in the variadic argument list. This change
introduces support for passing arrays using a pointer to a plain
C array of the basic type. This is of particular benefit for
decoding messages when you don't know how many array elements
are being received.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The dbus_connection_send_with_reply_and_block method will
automatically call dbus_set_error_from_message for us. We
mistakenly thought we had todo it because of a flaw in the
systemd unit test mock impl. The latter should have directly
set the error object, instead of creating an error message
object.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virDBusMessageRead method should not have side-effects on
the message parameter passed in, so unref'ing it is wrong.
The caller should unref only when they decided they are done
with it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The test suites often have to create DBus method reply messages
with payloads. Create two helpers for simplifying the process
of creating replies with payloads.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Split the virDBusMethodCall method into a couple of new methods
virDBusCall, virDBusCreateMethod and virDBusCreateMethodV.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virLogParseDefaultPriority's successful return value is the same as
virLogSetDefaultPriority's successful return value. So it should be 0
rather than the parsed log level.
Signed-off-by: Zhou Yimin <zhouyimin@huawei.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1007754
When attaching a new device, we need to check if its boot order
configuration is compatible with current domain definition.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The offset of virDomainDeviceInfo structure within a device definition
varies with device type and some types do not contain the info structure
at all. This new API makes it easier to access the info structure from a
generic virDomainDeviceDef structure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When checking compatibility of a device with a domain definition, we
should know what we're going to do with the device. Because we may need
to check for different things when we're attaching a new device versus
detaching an existing device.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
A device needs to be checked for compatibility with the domain
definition it corresponds to. Specifically, for VIR_DOMAIN_AFFECT_CONFIG
case we should check against persistent def rather than active def.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=844378
When qemu dies early after connecting to its monitor but before we
actually try to read something from the monitor, we would just fail
domain start with useless message:
"An error occurred, but the cause is unknown"
This is because the real error gets reported in a monitor EOF handler
executing within libvirt's event loop.
The fix is to take any error set in qemuMonitor structure and propagate
it into the thread-local error when qemuMonitorClose is called and no
thread-local error is set.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When listening for a subset of monitor events, it can be tedious
to register for each event name in series; nicer is to register
for multiple events in one go. Implement a flag to use regex
interpretation of the event filter.
While at it, prove how much I hate the shift key, by adding a
way to filter for 'shutdown' instead of 'SHUTDOWN'. :)
* include/libvirt/libvirt-qemu.h
(virConnectDomainQemuMonitorEventRegisterFlags): New enum.
* src/libvirt-qemu.c (virConnectDomainQemuMonitorEventRegister):
Document flags.
* tools/virsh-domain.c (cmdQemuMonitorEvent): Expose them.
* tools/virsh.pod (qemu-monitor-event): Document this.
* src/conf/domain_event.c
(virDomainQemuMonitorEventStateRegisterID): Add flags.
(virDomainQemuMonitorEventFilter): Handle regex, and optimize
client side.
(virDomainQemuMonitorEventCleanup): Clean up regex.
Signed-off-by: Eric Blake <eblake@redhat.com>
Filtering monitor events by name requires tracking the name for
the duration of the filtering. In order to free the name, I
found it easiest to just piggyback on the user's freecb function,
which gets called when the event is deregistered.
For events without a name filter, we have the design of multiple
client registrations sharing a common server registration, because
the server side uses the same callback function and we reject
duplicate use of the same function. But with events in the mix,
we want to be able to allow the same function pointer to be used
with more than one event name. The solution is to tweak the
duplicate detection code to only act when there is no additional
filtering; if name filtering is in use, there is exactly one
client registration per server registration. Yes, this means
that there is no longer a bound on the number of server
registrations possible, so a malicious client could repeatedly
register for the same name event to exhaust server memory. On
the other hand, we already restricted monitor events to require
write access (compared to normal events only needing read access),
and separated it into the intentionally unsupported
libvirt-qemu.so, with documentation that using this function is
for debug purposes only; so it is not a security risk worth
worrying about a client trying to abuse multiple registrations.
* src/conf/domain_event.c (virDomainQemuMonitorEventData): New
struct.
(virDomainQemuMonitorEventFilter)
(virDomainQemuMonitorEventCleanup): New functions.
(virDomainQemuMonitorEventDispatchFunc)
(virDomainQemuMonitorEventStateRegisterID): Use new struct.
* src/conf/object_event.c (virObjectEventCallbackListCount)
(virObjectEventCallbackListAddID)
(virObjectEventCallbackListRemoveID)
(virObjectEventCallbackListMarkDeleteID): Drop duplicate detection
when filtering is in effect.
Signed-off-by: Eric Blake <eblake@redhat.com>
Wire up all the pieces to send arbitrary qemu events to a
client using libvirt-qemu.so. If the extra bookkeeping of
generating event objects even when no one is listening turns
out to be noticeable, we can try to further optimize things
by adding a counter for how many connections are using events,
and only dump events when the counter is non-zero; but for
now, I didn't think it was worth the code complexity.
* src/qemu/qemu_driver.c
(qemuConnectDomainQemuMonitorEventRegister)
(qemuConnectDomainQemuMonitorEventDeregister): New functions.
* src/qemu/qemu_monitor.h (qemuMonitorEmitEvent): New prototype.
(qemuMonitorDomainEventCallback): New typedef.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONIOProcessEvent):
Report events.
* src/qemu/qemu_monitor.c (qemuMonitorEmitEvent): New function, to
pass events through.
* src/qemu/qemu_process.c (qemuProcessHandleEvent): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
These are the first async events in the qemu protocol, so this
patch looks rather big compared to most RPC additions. However,
a large majority of this patch is just mechanical copy-and-paste
from recently-added network events. It didn't help that this
is also the first virConnect rather than virDomain prefix
associated with a qemu-specific API.
* src/remote/qemu_protocol.x (qemu_*_domain_monitor_event_*): New
structs and RPC messages.
* src/rpc/gendispatch.pl: Adjust naming conventions.
* daemon/libvirtd.h (daemonClientPrivate): Track qemu events.
* daemon/remote.c (remoteClientFreeFunc): Likewise.
(remoteRelayDomainQemuMonitorEvent)
(qemuDispatchConnectDomainMonitorEventRegister)
(qemuDispatchConnectDomainMonitorEventDeregister): New functions.
* src/remote/remote_driver.c (qemuEvents): Handle qemu events.
(doRemoteOpen): Register for events.
(remoteNetworkBuildEventLifecycle)
(remoteConnectDomainQemuMonitorEventRegister)
(remoteConnectDomainQemuMonitorEventDeregister): New functions.
* src/qemu_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Create qemu monitor events as a distinct class to normal domain
events, because they will be filtered differently. For ease of
review, the logic for filtering by event name is saved for a later
patch.
* src/conf/domain_event.c (virDomainQemuMonitorEventClass): New
class.
(virDomainEventsOnceInit): Register it.
(virDomainQemuMonitorEventDispose, virDomainQemuMonitorEventNew)
(virDomainQemuMonitorEventDispatchFunc)
(virDomainQemuMonitorEventStateRegisterID): New functions.
* src/conf/domain_event.h (virDomainQemuMonitorEventNew)
(virDomainQemuMonitorEventStateRegisterID): New prototypes.
* src/libvirt_private.syms (conf/domain_conf.h): Export them.
Several times in the past, qemu has implemented a new event,
but libvirt has not yet caught up to reporting that event to
the user applications. While it is possible to track libvirt
logs to see that an unknown event was received and ignored,
it would be nicer to copy what 'virsh qemu-monitor-command'
does, and expose this information to the end developer as
one of our unsupported qemu-specific commands.
If you find yourself needing to use this API for more than
just development purposes, please ask on the libvirt list
for a supported counterpart event to be added in libvirt.so.
While the supported virConnectDomainEventRegisterAny() API
takes an id which determines the signature of the callback,
this version takes a string filter and always uses the same
signature. Furthermore, I chose to expose this as a new API
instead of trying to add a new eventID at the top level, in
part because the generic option lacks event name filtering,
and in part because the normal domain event namespace should
not be polluted by a qemu-only event. I also added a flags
argument; unused for now, but we might decide to use it to
allow a user to request event names by glob or regex instead
of literal match.
This API intentionally requires full write access (while
normal event registration is allowed on read-only clients);
this is in part due to the fact that it should only be used
by debugging situations, and in part because the design of
per-event filtering in later patches ended up allowing for
duplicate registrations that could potentially be abused to
exhaust server memory - requiring write privileges means
that such abuse will not serve as a denial of service attack
against users with higher privileges.
* include/libvirt/libvirt-qemu.h
(virConnectDomainQemuMonitorEventCallback)
(virConnectDomainQemuMonitorEventRegister)
(virConnectDomainQemuMonitorEventDeregister): New prototypes.
* src/libvirt-qemu.c (virConnectDomainQemuMonitorEventRegister)
(virConnectDomainQemuMonitorEventDeregister): New functions.
* src/libvirt_qemu.syms (LIBVIRT_QEMU_1.2.1): Export them.
* src/driver.h (virDrvConnectDomainQemuMonitorEventRegister)
(virDrvConnectDomainQemuMonitorEventDeregister): New callbacks.
Signed-off-by: Eric Blake <eblake@redhat.com>
If we cannot stat/open a file on pool refresh, returning -1 aborts
the refresh and the pool is undefined.
Only treat missing files as fatal unless VolOpenCheckMode is called
with the VIR_STORAGE_VOL_OPEN_ERROR flag. If this flag is missing
(when it's called from virStorageBackendProbeTarget in
virStorageBackendFileSystemRefresh), only emit a warning and return
-2 to let the caller skip over the file.
https://bugzilla.redhat.com/show_bug.cgi?id=977706
Without this, using /dev/mapper as a directory pool
fails in virStorageBackendUpdateVolTargetInfoFD:
cannot seek to end of file '/dev/mapper/control': Illegal seek
Skip over character devices by default.
https://bugzilla.redhat.com/show_bug.cgi?id=710866
virStorageBackendISCSISession only needs the path of the source
device and virStorageBackendISCSIRescanLUNs doesn't need the pool
at all.
This will allow the functions to be moved to src/util.
Per the documentation, is_selinux_enabled() returns -1 on error.
Account for this. Previously when -1 was being returned the condition
would still be true. I was noticing this because on my system that has
selinux disabled I was getting this in the libvirt.log every 5
seconds:
error : virIdentityGetSystem:173 : Unable to lookup SELinux process context: Invalid argument
With this patch applied, I no longer get these messages every 5
seconds. I am submitting this in case its deemed useful for inclusion.
Anyone have any comments on this change? This is a patch off current
master.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
New functionalities:
- connectGetMaxVcpus - on bhyve hardcode this value to 16
- nodeGetFreeMemory - do not use physmem_get on FreeBSD, since
it might get wrong value on systems with
more than 100GB of RAM
- nodeGetCPUMap - wrapper only for mapping function, currently not
supported by FreeBSD
- nodeSet/GetMemoryParameters - wrapper only for future improvements,
currently not supported by FreeBSD
The virSocketAddrMask method did not initialize all fields
in the sockaddr_in6 struct. In paticular the 'sin6_scope_id'
field could contain random garbage, which would in turn
affect the result of any later virSocketAddrFormat calls.
This led to ip6tables rules in the FORWARD chain which
matched on random garbage sin6_scope_id. Fortunately these
were ACCEPT rules, so the impact was merely that desired
traffic was blocked, rather than undesired traffic allowed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Valgrind reported leaking of maxCpus and arch strings from
virXPathString, as well as the leak of the machineMaxCpus array.
Don't use 'str' for the strings we don't want to free, to allow
freeing of 'str' in the cleanup label and free machineMaxCpus
in virCapsReset too.
Move the domain event handler and shutdown thread out of the main
driver module and into libxl_domain module
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Include a pointer to the libxl driver in libxlDomainObjPrivate
object so it can be used in the domain event handler and
shutdown thread.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlVmStart from libxl_driver to libxl_domain for
use by other libxl modules. For consistency, rename to
libxlDomainStart.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlFreeMem from libxl_driver to libxl_domain for
use by other libxl modules. For consistency, rename to
libxlDomainFreeMem.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlDoNodeGetInfo from libxl_driver to libxl_conf
for use by other libxl modules. For consistency, rename to
libxlDriverNodeGetInfo.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlDomEventsRegister from libxl_driver to libxl_domain for
use by other libxl modules. For consistency, rename to
libxlDomainEventsRegister.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlVmCleanup and libxlVmCleanupJob from libxl_driver to
libxl_domain for use by other libxl modules. For consistency,
rename to libxlDomainCleanup and libxlDomainCleanupJob.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move libxlSaveImageOpen from libxl_driver to libxl_domain for
use by other libxl modules. For consistency, rename to
libxlDomainSaveImageOpen.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Currently, we use pthread_sigmask(SIG_BLOCK, ...) prior to calling
poll(). This is okay, as we don't want poll() to be interrupted.
However, then - immediately as we fall out from the poll() - we try to
restore the original sigmask - again using SIG_BLOCK. But as the man
page says, SIG_BLOCK adds signals to the signal mask:
SIG_BLOCK
The set of blocked signals is the union of the current set and the set argument.
Therefore, when restoring the original mask, we need to completely
overwrite the one we set earlier and hence we should be using:
SIG_SETMASK
The set of blocked signals is set to the argument set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1071181
Commit 49b59a15 fixed one problem but masks another one related to pointer
freeing.
Avoid putting of the virNWFilterSnoopReq once the thread has been started.
It belongs to the thread and the thread will call virNWFilterSnoopReqPut() on it.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Before refactoring this struct, I found it helpful to track which
'int' fields really contain an enum value.
* src/conf/domain_conf.h (_virDomainDiskDef): Add comments.
Signed-off-by: Eric Blake <eblake@redhat.com>
Ancient automake (such as from RHEL5) does not provide abs_srcdir and
abs_builddir variables which are used by a recent commit of mine
(e562e82).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
To allow for fault injection of the virCommand dry run,
add the ability to register a callback. The callback will
be passed the argv, env and stdin buffer and is expected
to return the exit status and optionally fill stdout and
stderr buffers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The CMD_STOPONERR macro uses its parameter as a boolean, so should
be passed true rather than 1.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'int isTempChain' parameter to various nwfilter methods
only takes two values so should be a bool type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Many nwfilter methods have an int return value but only ever
return 0 and their callers never check the return value either.
These methods can all be void.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Many nwfilter methods have an 'int stopOnError' parameter but
with 1 exception, the callers always pass '1'. The parameter
can therefore be removed from all except one method. That method
will be changed to 'bool stopOnError'
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A lot of methods have a 'bool incoming' parameter but then
do (incoming) ? ... : .... The round brackets here add nothing
to the code so can be removed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Many methods in the nwfilter code have an 'int incoming' parameter
that only takes 0 or 1, so should use a bool instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In libxl driver oldStateDir is NULL when calling
virHostdevReAttachDomainHostdevs. This is allowed.
Remove ATTRIBUTE_NONNULL setting from oldStateDir.
Introduced by commit 6225cb3.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
libxl uses the libxl_vnc_info and libxl_sdl_info fields from the
hvm union in libxl_domain_build_info struct when generating QEMU
args for VNC or SDL. These fields were left unset by the libxl
driver, causing libxl to ignore any user settings. E.g. with
<graphics type='vnc' port='5950'/>
port would be ignored and QEMU would instead be invoked with
-vnc 127.0.0.1:0,to=99
Unlike the libxl_domain_config struct, the libxl_domain_build_info
contains only a single libxl_vnc_info and libxl_sdl_info, so
populate these fields from the first vfb in
libxl_domain_config->vfbs.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: David Kiarie <davidkiarie4@gmail.com>
Emacs is fairly good about navigating across function and scope
boundaries, provided that the code has balanced {}. The vbox
code, however, violated that premise, by splitting 'if () {'
across several #ifdef branches, but sharing the '} else {...}'
outside of the branches. The extra lines of code is worth my
sanity, in a function that is already a horrendous 1100+ lines
long.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc) Duplicate code
rather than trying to share else branch across #ifdef.
Signed-off-by: Eric Blake <eblake@redhat.com>
A earlier commit changed the global log buffer so that it only
records messages that are explicitly requested via the log
filters setting. This removes the performance burden, and
improves the signal/noise ratio for messages in the global
buffer. At the same time though, it is somewhat pointless, since
all the recorded log messages are already going to be sent to an
explicit log output like syslog, stderr or the journal. The
global log buffer is thus just duplicating this data on stderr
upon crash.
The log_buffer_size config parameter is left in the augeas
lens to prevent breakage for users on upgrade. It is however
completely ignored hereafter.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the log filter strings are used in a string comparison
against the source filename each time log message is emitted.
If no log filters at all are set, there's obviously no string
comparison to be done. If any single log filter is set though,
this imposes a compute burden on every logging call even if logs
from the file in question are disabled. This string comparison
must also be done while the logging mutex is held, which has
implications for concurrency when multiple threads are emitting
log messages.
This changes the log filtering to be done based on the virLogSource
object name. The virLogSource struct is extended to contain
'serial' and 'priority' fields. Any time the global log filter
rules are changed a global serial number is incremented. When a
log message is emitted, the serial in the virLogSource instance
is compared with the global serial number. If out of date, then
the 'priority' field in the virLogSource instance is updated based
on the new filter rules. The 'priority' field is checked to see
whether the log message should be sent to the log outputs.
The comparisons of the 'serial' and 'priority' fields are done
with no locks held. So in the common case each logging call has
an overhead of 2 integer comparisons, with no locks held. Only
if the decision is made to forward the message to the log output,
or if the 'serial' value is out of date do locks need to be
acquired.
Technically the comparisons of the 'serial' and 'priority' fields
should be done with locks held, or using atomic operations. Both
of these options have a notable performance impact, however, and
since all writes a protected by a global mutex, it is believed
that worst case behaviour where the fields are read concurrently
with being written would merely result in an mistaken emission
or dropping of the log message in question. This is an acceptable
tradeoff for the performance benefit of avoiding locking.
As a quick benchmark, a demo program that registers 500 file
descriptors with the event loop (eg equiv of 500 QEMU monitor
commands), creates pending read I/O on every FD, and then runs
virEventRunDefaultImpl() took 4.6 seconds to do 51200 iterations.
After this optimization it only takes 3.3 seconds, with the log
APIs no longer being a relevant factor in the running time.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As part of the goal to get away from doing string matching on
filenames when deciding whether to emit a log message, turn
the virLogSource enum into a struct which contains a log
"name". There will eventually be one virLogSource instance
statically declared per source file. To minimise churn in this
commit though, a single global instance is used.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The dtrace probe macros rely on the logging API. We can't make
the internal.h header include the virlog.h header though since
that'd be a circular include. Instead simply split the dtrace
probes into their own header file, since there's no compelling
reason for them to be in the main internal.h header.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The error reporting code will invoke a callback when any error
is raised and the default callback will print to stderr. The
virRaiseErrorFull method also sends all error messages on to the
logging code, which also prints to stderr by default. To avoid
duplicated data on stderr, the logging code has some logic to
skip emission when no log outputs are configured, which checks
whether the virLogSource == VIR_LOG_FROM_ERROR.
Meanwhile the libvirtd daemon can register another callback which
is used to reduce log message priority from error to a lower level.
When this is used we do want messages to end up on stderr, so the
error code will conditionally use either VIR_LOG_FROM_FILE or
VIR_LOG_FROM_ERROR depending on whether such a callback is provided.
This will all complicate later refactoring. By pushing the checks
for whether a log output is present up a level into the error code,
the special cases can be isolated in one place.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
With the vast number of log debug statements in the code, the
logging framework has a measurable performance impact on libvirt
code, particularly in the daemon event loop.
The global log buffer records every single log message triggered
whether anyone cares to see them or not. This makes it impossible
to eliminate the overhead of printf format expansions in any of
the logging code. It is possible to disable the global log buffer
in libvirtd itself, but this doesn't help client side library
code. Also even if disabled by the config file, the existence of
the feature makes other performance improvements in the logging
layer impossible.
Instead of logging every single message to the global buffer, only
log messages that pass the log filters. This if libvirtd is set
to have log_filters="1:libvirt 1:qemu" the global log buffer will
only get filled with those messages instead of everything. This
reduces the performance burden, as well as improving the signal
to noise ratio of the log buffer.
As a quick benchmark, a demo program that registers 500 file
descriptors with the event loop (eg equiv of 500 QEMU monitor
commands), creates pending read I/O on every FD, and then runs
virEventRunDefaultImpl() took 1 minute 40 seconds to do 51200
iterations with nearly all the time shown against the logging
code. After this optimization it only takes 4.6 seconds.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Coverity spotted a use of possibly undefined variable. If a server is
restarting as an result of update, the JSON file that keeps current
value of some variables will not contain the new variables. This is
the case of @max_anonymous_clients too. We are correctly querying if
there's "max_anonymous_clients" in the JSON, however, we are not
setting a sane default if there's none.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We allow translation from no_bandwidth to has_bandwidth for a vnic.
However, going in the opposite direction is not implemented. It's not
limitation of the API rather than internal implementation. The problem
is, we correctly detect that user hasn't specified any outbound (say
he wants to clear out outbound). However, this gets overwritten by
current vnic outbound settings. Then, virNetDevBandwidthSet doesn't
change anything. We need to stop overwriting the outbound if users
don't want us to. Same applies for inbound.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If there should be some sort of separator it is better to use comment
with the filename, copyright, description, license information and
authors.
Found by:
git grep -nH '^$' | grep '\.[ch]:1:'
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch is not trying to fix every switch, just the ones I worked
with last time, because some of these were especially unreadable.
Covers enums virDomainGraphicsType and virDomainChrType (where
applicable).
Also sort its cases by their value.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit a1cbe4b5 added a check for spaces around assignments and this
patch extends it to checks for spaces around '=='. One exception is
virAssertCmpInt where comma after '==' is acceptable (since it is a
macro and '==' is its argument).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
While running qemuxml2xmltest, it was found that valgrind pointed out
the following memory leak:
==21905== 26 bytes in 1 blocks are definitely lost in loss record 23 of 69
==21905== at 0x4A069EE: malloc (vg_replace_malloc.c:270)
==21905== by 0x3E782A754D: xmlStrndup (in /usr/lib64/libxml2.so.2.7.6)
==21905== by 0x4CD986D: virDomainChrSourceDefParseXML (domain_conf.c:7233)
==21905== by 0x4CE4199: virDomainChrDefParseXML (domain_conf.c:7512)
==21905== by 0x4CFAF3F: virDomainDefParseXML (domain_conf.c:12303)
==21905== by 0x4CFB46E: virDomainDefParseNode (domain_conf.c:13031)
==21905== by 0x4CFB5E9: virDomainDefParse (domain_conf.c:12973)
==21905== by 0x41E9D8: testCompareXMLToXMLFiles (qemuxml2xmltest.c:40)
==21905== by 0x41EBAA: testCompareXMLToXMLHelper (qemuxml2xmltest.c:93)
==21905== by 0x421D21: virtTestRun (testutils.c:199)
==21905== by 0x41FCE9: mymain.part.0 (qemuxml2xmltest.c:244)
==21905== by 0x42249D: virtTestMain (testutils.c:782)
==21905==
... and 7 more
Make virt-aa-helper create rules to allow VMs access to filesystem
mounts from the host.
Signed-off-by: Felix Geyer <debfx@fobos.de>
Signed-off-by: Hiroshi Miura <miurahr@linux.com>
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
While running domainsnapshotxml2xmltest, it was found that valgrind pointed out
the following memory leak:
==32176== 42 (32 direct, 10 indirect) bytes in 1 blocks are definitely lost in loss record 42 of 66
==32176== at 0x4A069EE: malloc (vg_replace_malloc.c:270)
==32176== by 0x4A06B62: realloc (vg_replace_malloc.c:662)
==32176== by 0x4C65A07: virReallocN (viralloc.c:243)
==32176== by 0x4C65B2E: virExpandN (viralloc.c:292)
==32176== by 0x4C65E30: virInsertElementsN (viralloc.c:434)
==32176== by 0x4CD71F3: virDomainDiskSourceDefParse (domain_conf.c:5078)
==32176== by 0x4CF6EF4: virDomainSnapshotDefParseNode (snapshot_conf.c:151)
==32176== by 0x4CF7314: virDomainSnapshotDefParseString (snapshot_conf.c:410)
==32176== by 0x41FB8D: testCompareXMLToXMLHelper (domainsnapshotxml2xmltest.c:100)
==32176== by 0x420FD1: virtTestRun (testutils.c:199)
==32176== by 0x41F859: mymain (domainsnapshotxml2xmltest.c:222)
==32176== by 0x42174D: virtTestMain (testutils.c:782)
==32176==
... and one more.
The virNWFilterVarCombIterNext method will free its
parameter when it gets to the end of the iterator.
This is somewhat misleading design, making it appear
as if the caller has a memory leak. Remove the free'ing
of the parameter and ensure that the calling method
ebiptablesCreateRuleInstanceIterate free's it instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The ebiptablesAddRuleInst method would leak an instance
of ebiptablesRuleInstPtr if it hit OOM when adding it
to the list of instances. Remove the pointless helper
method virNWFilterRuleInstAddData and just inline the
call to VIR_APPEND_ELEMENT and free the instance on
failure.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The libxl driver reads /proc/xen/capabilities to see if it
is on a Dom0 kernel. If that file does not even exist though,
an error is logged. Check for the file existance before trying
to read its contents to avoid the log message.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Addition of the hostbridge device was mistakenly placed to
bhyveBuildNetArgStr(). This could result in hostbridge device not being
added to the commandline if there are no network devices specified, but
hostbridge device should be added unconditionally.
Fix by placing it to virBhyveProcessBuildBhyveCmd().
https://bugzilla.redhat.com/show_bug.cgi?id=992980
This config tunable allows users to determine the maximum number of
accepted but yet not authenticated users.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The counter gets incremented on each unauthenticated client added to the
server and decremented whenever the client authenticates.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
- As of commit 2ff4c137, all virGet*() functions in datatypes.c always
return pointers to new objects. Objects are not cached in a
per-connection hashtable.
- Fix variable names in comments for all vir*Dispose() functions in
datatypes.c.
- Add comments for virGetStream(), virStreamDispose(),
virGetDomainSnapshot(), virDomainSnapshotDispose().
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Our current pidfile acquire APis (virPidFileAcquire) simply return -1 upon
failure to acquire a lock. This patch adds a parameter 'bool waitForLock'
which instructs the APIs if we want to make it block and wait for the lock
or not.
Thre was a syntax error in checking virRegisterStateDriver in
the remote driver, and bogus checking of a void return type
of virDomainConfNWFilterRegister in nwfilter.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Coverity found an issue in lxc_driver and uml_driver that we don't
check the return value of register functions.
I've also updated all other places and unify the way we check the
return value.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Right now we are parsing the XML as though it's live, which for example
will choke on hardcoded XML like:
<seclabel type='dynamic' model='selinux' relabel='yes'/>
Erroring with:
$ sudo virsh domxml-to-native qemu-argv f
error: XML error: security label is missing
All drivers are fixed, but only qemu was tested.
We have to explicitly destroy TAP devices on FreeBSD because
they're not freed after being closed, otherwise we end up with
orphaned TAP devices after destroying a domain.
A recent change to openvz_driver.c caused Coverity to make additional
comparisons and find that the openvzRegister() was not checking the
status of virRegisterDriver() call like other callers and thus generated
a CHECKED_RETURN condition
There were a lot of changes here, but all very mechanical. For some
reason, the virBufferPtr had been named "xml" instead of "buf" in this
file, so since the indentation changing touched almost every line
using the buffer, I took this chance to change its name for "buf" for
consistency with every other file.
This file was using multiple virBuffers, inserting the contents of
buf3 into buf2, then inserting the contents of buf2 into buf1, rather
than the more conventional method of just passing around a single
virBufferPtr and streaming everything into that single buffer. This
was unnecessary, and also made it more difficult to make indentation
relative, because when you insert a string into a buffer, the
indentation of the buffer is only applied once at the beginning of the
string, *not* each time a newline is encountered in the string.
These format functions needed the ability to be indented by an
arbitrary amount, but were written before the introduction of
virBufferAdjustIndent(). They instead used the much more clunky method
of adding a "level" arg to every format function, and padding with
spaces using the "%*s" printf format specifier (giving it the level,
and "", which has the effect of adding level spaces to the output).
While eliminating the hardcoded indentation in other xml, I decided it
was finally time to also modernize the interface formatter code to
make it more consistent.
All leading spaces in domain snapshot xml format functions have been
replaced with appropriate calls to virBufferAdjustIndent(). This will
make it easier to call other similarly fixed format functions
(e.g. domain device format functions).
Many of the domain xml format functions (including all of the device
format functions) had hard-coded spaces, which made for incorrect
indentation when those functions were called in a different context
(for example, commit 2122cf39 added <interface> XML into the document
provided to a network hook script, and in this case it should have
been indented by 2 spaces, but was instead indented by 6 spaces).
To make it possible to insert a properly indented device anywhere into
an XML document, this patch removes hardcoded spaces from the
formatting functions, and calls virBufferAdjustIndent() at appropriate
places instead. (a regex search of domain_conf.c was done to assure
that all occurrences of hardcoded spaces were removed).
virDomainDiskSourceDefFormatInternal() is also called from
snapshot_conf.c, so two virBufferAdjustIndent() calls were temporarily
added around that call - those functions will have hardcoded spaces
removed in a separate patch.
This could cause some conflicts when backporting future changes to the
formatting functions to older branches, but fortunately the changes
are almost all trivial, so conflict resolution will be obvious.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=862887
Add a netmask for the source and destination IP address for the
ebtables --arp-ip-src and --arp-ip-dst options. Extend the XML
parser with support for XML attributes for these netmasks similar
to already supported netmasks. Extend the documentation.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1072292
Fix a problem related to rule priorities that did not allow to
have rules applied that had a higher priority than the chain they
were in. In this case the chain did not exist yet when the rule
was instantiated. The solution is to adjust the priority of rules
if the priority of the chain is of higher value. That way the chain
will be created before the rule.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Commit 6b306d66 converted virHostdevManager to a virObject, but
missed adding a virObject field to the virHostdevManager struct.
Result is memory corruption when taking a reference on an instance
of the object, where atomic inc is done on the stateDir field.
Later use of stateDir crashes libvirtd.
When I played with virtlockd I was stunned by lacking
documentation. My frustration got bigger when I had to
read the patches to get the correct value to set in
qemu.conf.
Moreover, from pure libvirt-pride I'm changing commented
value from sanlock to lockd. We want to favor our own
implementation after all.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When ABI stability check fails, we only log the error message describing
the incompatibility. Let's log both XMLs in case of an error to make it
easier to analyze where and why the stability check failed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The kernel didn't support the unprivileged SGIO for SCSI generic
device finally, and since it's unknow whether the way to support
unprivileged SGIO for SCSI generic device will be similar as for
SCSI block device or not, even it's simliar (I.e. via sysfs, for
SCSI block device, it's /sys/dev/block/8\:0/queue/unpriv_sgio,
for example), the file name might be different, So it's better not
guess what it should be like currently.
This patch removes the related code (mainly about the "shareable"
checking on the "sgio" setting, it's not supported at all, why
we leave checking code there? :-), and error out if "sgio" is
specified in the domain config.
As soon as any guest mounts xenfs to /proc/xen, there is a capabilities
file in that directory. However it returns nothing when reading from it.
Change the test to actually check the contents of the file.
BugLink: http://bugs.launchpad.net/bugs/1248025
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
While running vircryptotest, it was found that valgrind pointed out the
following error:
==27453== Invalid write of size 1
==27453== at 0x4C7D7C9: virCryptoHashString (vircrypto.c:76)
==27453== by 0x401C4E: testCryptoHash (vircryptotest.c:41)
==27453== by 0x402A11: virtTestRun (testutils.c:199)
==27453== by 0x401AD5: mymain (vircryptotest.c:76)
==27453== by 0x40318D: virtTestMain (testutils.c:782)
==27453== by 0x3E6CE1ED1C: (below main) (libc-start.c:226)
==27453== Address 0x51f0541 is 0 bytes after a block of size 65 alloc'd
==27453== at 0x4A0577B: calloc (vg_replace_malloc.c:593)
==27453== by 0x4C69F2E: virAllocN (viralloc.c:189)
==27453== by 0x4C7D76B: virCryptoHashString (vircrypto.c:69)
==27453== by 0x401C4E: testCryptoHash (vircryptotest.c:41)
==27453== by 0x402A11: virtTestRun (testutils.c:199)
==27453== by 0x401AD5: mymain (vircryptotest.c:76)
==27453== by 0x40318D: virtTestMain (testutils.c:782)
==27453== by 0x3E6CE1ED1C: (below main) (libc-start.c:226)
==27453==
...and many more. Two observations: hashstrlen was already set
to include the trailing NUL byte (so writing to hashstrlen as
the array offset was indeed writing one byte beyond bounds), and
VIR_ALLOC_N already guarantees zero-initialization (so we already
have a trailing NUL without needing to explicitly write one).
Signed-off-by: Eric Blake <eblake@redhat.com>
Changes parameter from vm def to specific hostdevs info and name info, so that
it could be used more widely, e.g, could be used without full vm def info.
Change any variable names with Usb, Pci or Scsi to use
USB, PCI and SCSI since they are abbreviations.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some virHostdevXXXX methods included the string Hostdev again
as a suffix. Change the latter to Device instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Change any method names with Usb, Pci or Scsi to use
USB, PCI and SCSI since they are abbreviations.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Various methods in virnetdev.c and virhostdev.c were missing
const-ness for several char * parameters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
For extracting hostdev codes from qemu_hostdev.c to common library, change qemu
specific COLD_BOOT handling to be a flag, and pass it to hostdev functions.
For extracting hostdev codes from qemu_hostdev.c to common library, change qemu
specific cfg->relaxedACS handling to be a flag, and pass it to hostdev
functions.
Same logic of preparing/reattaching hostdevs could be used in attach/detach
hotplug places, so reuse hostdev interfaces to avoid duplicate, also for later
extracting general code to common library.
Update parameters from vm->def to specific name, hostdevs, nhostdevs to keep
consistentcy with PreparePCIDevices and PrepareSCSIDevices. And, at the same
time, make it reusable in later patch.
Use virObject to virHostdevManager, so that each driver using virHostdevManager
can keep a reference to it, and through counting refs to make virHostdevManager
get freed.
When libvirtd is run from a build directory without being installed, it
should not depend on files from a libvirt package installed in the
system. Not only because there may not be any libvirt installed at all.
We already do a good job for plugins but cpu_map.xml was still loaded
from the system.
The Makefile.am change is necessary to make this all work from VPATH
builds since libvirtd has no idea where to find libvirt sources. It only
knows the path from which it was started, i.e, a builddir.
https://bugzilla.redhat.com/show_bug.cgi?id=1074327
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This allows it to be used by the VIR_*_ELEMENT macros.
Also use them for parsing the definiton and remove the redundant
freeing of 'nodeset' before jumping to the cleanup label.
https://bugzilla.redhat.com/show_bug.cgi?id=1071095
Add a missing goto err_exit in the error path where an unsupported
value is assigned to the CTRL_IP_LEARNING key.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
When attaching to a QEMU process, the def->seclabels array is
going to be empty. The qemuProcessAttach method must thus
populate it with data for the security drivers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
While investigating https://bugzilla.redhat.com/show_bug.cgi?id=1061827
I noticed that we pass user input unscathed for block-pull, but
always pass a canonical absolute name through for block-commit.
[Note that we probably _ought_ to validate that the user's request
for block-pull actually matches the backing chain, the way we already
do for block-commit - but that's a separate issue. Further note that
the ability to pass user input through unscathed allows backdoors
such as specifying a backing image that is a network URI such as
a gluster disk, instead of forcing things to the local file system;
which is an area still under active investigation on whether libvirt
needs to behave differently for network disks.]
Since qemu may write the name that the user passed in as the backing
file, a user may have a reason to want a relative file name passed
through to qemu, and always munging things to absolute prevents that.
Put another way, if you have the backing chain:
[A] <- [B(back=./A)] <- [C(back=./B)]
and commit B into A (virsh blockcommit $dom vda --base A --top B),
the metadata of C will have to be re-written. But should it be
rewritten as [C(back=./A)] or as [C(back=/path/to/A)]? Still up in
the air is whether qemu's decision should be based on whether B
and/or C had relative paths, or on whether the --base and/or
--top arguments to the command were relative paths; but if we always
pass a canonical name, we've prevented the spelling of the command
arguments from being part of the hueristics that qemu uses.
I also audited the code, and verified that we never call
qemuMonitorBlockCommit() with a NULL base, either before or after
the change to qemu_driver.c.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Preserve user's
spelling, since absolute vs. relative matters to qemu.
* src/qemu/qemu_monitor.h (qemuMonitorBlockCommit): Base is never
null.
* src/qemu/qemu_monitor.c (qemuMonitorBlockCommit): Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockCommit):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockCommit):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit b9dd878f caused a regression in iptables interaction by
logging non-zero status at a higher level than VIR_INFO. Revert
that portion of the commit, as well as adding a comment explaining
why we check the status ourselves.
Reported by Nehal J Wani.
* src/util/viriptables.c (virIpTablesOnceInit): Undo log regression.
Signed-off-by: Eric Blake <eblake@redhat.com>
Supporting sexpr in connectDomainXMLFromNative in the libxl driver
adds flexibility for users importing legacy Xen configuration into
libvirt. E.g. this patch allows importing previous xend-managed
domains from /var/lib/xend/domains/<dom-uuid>/config.sxp into the
libvirt libxl driver.
From commit id 'd53bbfd1'
Found one core and one possible memory leak. Core seen during local
virt-test/tp_libvirt run for the vol_create_from test. The memory leak
was seen by inspection during a review of all VIR_APPEND_ELEMENT changes
In storage_backend_disk/virStorageBackendDiskMakeDataVol(), the 'vol'
needs to be kept around since it's used later, so use the _COPY macro.
This caused a segv in libvirtd:
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fffe87c3700 (LWP 6919)]
virStorageBackendDiskMakeDataVol (vol=0x0, groups=0x7fffc8000d70, pool=0x7fffc8002460) at storage/storage_backend_disk.c:66
66 if (vol->target.path == NULL) {
In storage_backend_rbd/virStorageBackendRBDRefreshPool() there's a failure
path where the 'vol' needs to go through virStorageVolDefFree() since it
wouldn't be appended.
The qemu_bridge_filter.c file had some helpers for calling
the ebtablesXXX functions todo bridge filtering. The only
thing these helpers did was to overwrite the original error
message from the ebtables code. For added fun, the callers
of these helpers overwrote the errors yet again. For even
more fun, one of the helpers called another helper and
overwrite its errors too.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The ebtablesRemoveForwardPolicyReject method was unused and
would not do anything useful even if called.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The ebtRules data structure serves no useful purpose as
the table name is never used and only 1 single chain name
needs to be stored. Just store the chain name directly
in the ebtablesContext instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When adding/removing ebtables rules, the code would keep
an array of all rules in memory. This list of rules was
never used for any purpose and would be lost if libvirtd
restarted. Delete all the unused code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The ebtablesForwardPolicyReject method is only used internally
to the ebtables code and thus should have been static.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The bridge_driver_platform.h defines many functions that
a platform driver must implement. Only two of these
functions are actually called from the main bridge driver
code. The remainder can be made internal to the linux
driver only.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Extracting capabilities from QEMU takes a notable amount of time
when all QEMU binaries are installed. Each system emulator
needs about 200-300ms multiplied by 26 binaries == ~5-8 seconds.
This change causes the QEMU driver to save an XML file containing
the content of the virQEMUCaps object instance in the cache
dir eg /var/cache/libvirt/qemu/capabilities/$SHA256(binarypath).xml
or $HOME/.cache/libvirt/qemu/cache/capabilities/$SHA256(binarypath).xml
We attempt to load this and only if it fails, do we fallback to
probing the QEMU binary. The ctime of the QEMU binary and libvirtd
are stored in the cached file and its data discarded if either
of them change.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Debian's package manager will preserve mtime timestamp on binaries
from the time they are built, rather than installed. So if a
user downgrades their QEMU dpkg, the libvirt capabilities
cache will not refresh. The fix is to use ctime instead of mtime
since it cannot be faked.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The future QEMU capabilities cache needs to be able to invalidate
itself if the libvirtd binary or any loadable modules are changed
on disk. Record the 'ctime' value for these binaries and provide
helper APIs to query it. This approach assumes that if libvirt.so
is changed, then libvirtd will also change, which should usually
be the case with libtool's wrapper scripts that cause libvirtd to
get re-linked
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Avoid the freeing of an array of zero file descriptors in case
of error. Initialize the array to -1 using memset.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Convert the sanlock and lockd lock driver plugins over to use
the new virCryptoHashString APIs instead of having their own
duplicated code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
GNULIB provides APIs for calculating md5 and sha256 hashes,
but these APIs only return you raw byte arrays. Most users
in libvirt want the hash in printable string format. Add
some helper APIs in util/vircrypto.{c,h} for doing this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This fixes a possible double free. In virNetworkAssignDef() if
virBitmapNew() fails, then virNetworkObjFree(network) is called.
However, with network->def pointing to actual @def. So if caller
frees @def again, ...
Moreover, this fixes one possible memory leak too. In
virInterfaceAssignDef() if appending to the list of interfaces
fails, we ought to call virInterfaceObjFree() instead of bare
VIR_FREE().
Although, in order to do that some array size variables needs
to be turned into size_t rather than int.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The nwfilter conf update mutex previously serialized
updates to the internal data structures for firewall
rules, and updates to the firewall itself. The latter
was recently turned into a read/write lock, and filter
instantiation allowed to proceed in parallel. It was
believed that this was ok, since each filter is created
on a separate iptables/ebtables chain.
It turns out that there is a subtle lock ordering problem
on virNWFilterObjPtr instances. __virNWFilterInstantiateFilter
will hold a lock on the virNWFilterObjPtr it is instantiating.
This in turn invokes virNWFilterInstantiate which then invokes
virNWFilterDetermineMissingVarsRec which then invokes
virNWFilterObjFindByName. This iterates over every single
virNWFilterObjPtr in the list, locking them and checking their
name. So if 2 or more threads try to instantiate a filter in
parallel, they'll all hold 1 lock at the top level in the
__virNWFilterInstantiateFilter method which will cause the
other thread to deadlock in virNWFilterObjFindByName.
The fix is to add an exclusive mutex to serialize the
execution of __virNWFilterInstantiateFilter.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This resolves a Coverity RESOURCE_LEAK issue introduced by commit
id 'de6fa535' where the virSCSIDeviceSetUsedBy() didn't VIR_FREE
the 'copy' or possibly VIR_STRDUP()'d values. It also ensures that
the VIR_APPEND_ELEMENT is successful...
If SELinux is compiled into libvirt but it is disabled on the host,
libvirtd logs:
error : virIdentityGetSystem:173 : Unable to lookup SELinux process
context: Invalid argument
on each and every client connection.
Use is_selinux_enabled() to skip retrieval of the process's SELinux
context if SELinux is disabled.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
When domain is started with setting that cannot be done, i.e. those
that require cgroups, there is no error reported and it succeeds
without any message whatsoever.
When setting with API, virsh, an error is reported, but only due to
the fact that no cgroups are mounted (priv->cgroup == NULL).
Given the above it seems reasonable to reject such unsupported
settings.
This patch effectively changes the error message from:
$ virsh -c qemu:///session schedinfo dummy
Scheduler : Unknown
error: Requested operation is not valid: cgroup CPU controller is not mounted
to:
$ virsh -c qemu:///session schedinfo dummy
Scheduler : Unknown
error: Operation not supported: CPU tuning is not available in session mode
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1023366
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
As of commit 46ec5f85, the conn.lock mutex does not need to be held
when calling any vir*Dispose() function in datatypes.c (via virObjectUnref()).
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The qemuMonitorJSONBlockJob handles a few errors internally. If qemu
returns a different error we would report a rather unhelpful message:
$ virsh blockpull gluster-job vda --base /dev/null
error: internal error: Unexpected error
As the actual message from qemu contains a bit more info, let's use it
to report something a little more useful:
$ virsh blockpull gluster-job vda --base /dev/null
error: internal error: Unexpected error: (GenericError) 'Base '/dev/null' not found'
In storageVolLookupByPath the provided path is "sanitized" at first.
This removes some extra slashes and stuff. When the lookup of the volume
fails the original path is used which makes it hard to trace errors in
some cases.
Improve the error message to print the sanitized path along with the
user provided path if they are not equal.
When looking up a volume by path on a non-local filesystem don't use the
"cleaned" path that might be mangled in such a way that it will differ
from a path provided by a storage backend.
Skip the cleanup step for gluster, sheepdog and RBD.
Pools that are not backed by files in the filesystem cause problems with
some APIs. Error out when attempting to upload a volume in such a pool
as currently we expect a local file representation for it.
use_apparmor() was first designed to be called from withing libvirtd,
but libvirt_lxc also uses it. in libvirt_lxc, there is no need to check
whether to use apparmor or not: just use it if possible.
In qemuMonitorJSONExtractCPUInfo an error message hinted on missing
character device data which is wrong.
Also a comment states that only qemu-kvm tree includes the thread_id
field. This is no longer true.
https://bugzilla.redhat.com/show_bug.cgi?id=1071264
Reverting of external snapshots is not supported currently. The check
that is present doesn't properly check for all aspects that make a
snapshot external. Use virDomainSnapshotIsExternal() to do the check.
As I did previously in 4f588a1b46, libvirt needs to set virtio vectors.
Previously, we were advised to use vectors=N, where
N = 2 * (number of queues) + 1
However, just recently this advisory has changed on the Multiquue wiki
page [1] to:
N = 2 * (number of queues) + 2
1: http://www.linux-kvm.org/page/Multiqueue#Enable_MQ_feature
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If systemd is installed, but is not the init system,
systemd-machined fails with an unhelpful error message:
Launch helper exited with unknown return code 1
Currently we only check if the "machine1" service is
available (in ListActivatableNames).
Also check if "systemd1" service is registered with DBus
(ListNames).
This fixes https://bugs.gentoo.org/show_bug.cgi?id=493246#c22
Introduce virDBusIsServiceInList which can be used to call other
methods for listing services (ListNames), not just ListActivatableNames.
No functional change, fixed the 'Retruns' typo.
Jenkins pointed out that the previous commit violates syntax
check when cppi is installed.
* src/nwfilter/nwfilter_dhcpsnoop.c (SNOOP_POLL_MAX_TIMEOUT_MS):
Update indentation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Libpcap 1.5 requires a larger buffer than previous pcap versions.
Adjust the size of the buffer to 128kb.
This patch should address symptoms in BZ 1071181 and BZ 731059
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Cap the poll timeout in the DHCP Snooping code to a max. of 10 seconds
to not hold up the libvirt shutdown longer than this.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
The old semantics of virFork() violates the priciple of good
usability: it requires the caller to check the pid argument
after use, *even when virFork returned -1*, in order to properly
abort a child process that failed setup done immediately after
fork() - that is, the caller must call _exit() in the child.
While uses in virfile.c did this correctly, uses in 'virsh
lxc-enter-namespace' and 'virt-login-shell' would happily return
from the calling function in both the child and the parent,
leading to very confusing results. [Thankfully, I found the
problem by inspection, and can't actually trigger the double
return on error without an LD_PRELOAD library.]
It is much better if the semantics of virFork are impossible
to abuse. Looking at virFork(), the parent could only ever
return -1 with a non-negative pid if it misused pthread_sigmask,
but this never happens. Up until this patch series, the child
could return -1 with non-negative pid if it fails to set up
signals correctly, but we recently fixed that to make the child
call _exit() at that point instead of forcing the caller to do
it. Thus, the return value and contents of the pid argument are
now redundant (a -1 return now happens only for failure to fork,
a child 0 return only happens for a successful 0 pid, and a
parent 0 return only happens for a successful non-zero pid),
so we might as well return the pid directly rather than an
integer of whether it succeeded or failed; this is also good
from the interface design perspective as users are already
familiar with fork() semantics.
One last change in this patch: before returning the pid directly,
I found cases where using virProcessWait unconditionally on a
cleanup path of a virFork's -1 pid return would be nicer if there
were a way to avoid it overwriting an earlier message. While
such paths are a bit harder to come by with my change to a direct
pid return, I decided to keep the virProcessWait change in this
patch.
* src/util/vircommand.h (virFork): Change signature.
* src/util/vircommand.c (virFork): Guarantee that child will only
return on success, to simplify callers. Return pid rather than
status, now that the situations are always the same.
(virExec): Adjust caller, also avoid open-coding process death.
* src/util/virprocess.c (virProcessWait): Tweak semantics when pid
is -1.
(virProcessRunInMountNamespace): Adjust caller.
* src/util/virfile.c (virFileAccessibleAs, virFileOpenForked)
(virDirCreate): Likewise.
* tools/virt-login-shell.c (main): Likewise.
* tools/virsh-domain.c (cmdLxcEnterNamespace): Likewise.
* tests/commandtest.c (test23): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Auditing all callers of virCommandRun and virCommandWait that
passed a non-NULL pointer for exit status turned up some
interesting observations. Many callers were merely passing
a pointer to avoid the overall command dying, but without
caring what the exit status was - but these callers would
be better off treating a child death by signal as an abnormal
exit. Other callers were actually acting on the status, but
not all of them remembered to filter by WIFEXITED and convert
with WEXITSTATUS; depending on the platform, this can result
in a status being reported as 256 times too big. And among
those that correctly parse the output, it gets rather verbose.
Finally, there were the callers that explicitly checked that
the status was 0, and gave their own message, but with fewer
details than what virCommand gives for free.
So the best idea is to move the complexity out of callers and
into virCommand - by default, we return the actual exit status
already cleaned through WEXITSTATUS and treat signals as a
failed command; but the few callers that care can ask for raw
status and act on it themselves.
* src/util/vircommand.h (virCommandRawStatus): New prototype.
* src/libvirt_private.syms (util/command.h): Export it.
* docs/internals/command.html.in: Document it.
* src/util/vircommand.c (virCommandRawStatus): New function.
(virCommandWait): Adjust semantics.
* tests/commandtest.c (test1): Test it.
* daemon/remote.c (remoteDispatchAuthPolkit): Adjust callers.
* src/access/viraccessdriverpolkit.c (virAccessDriverPolkitCheck):
Likewise.
* src/fdstream.c (virFDStreamCloseInt): Likewise.
* src/lxc/lxc_process.c (virLXCProcessStart): Likewise.
* src/qemu/qemu_command.c (qemuCreateInBridgePortWithHelper):
Likewise.
* src/xen/xen_driver.c (xenUnifiedXendProbe): Simplify.
* tests/reconnect.c (mymain): Likewise.
* tests/statstest.c (mymain): Likewise.
* src/bhyve/bhyve_process.c (virBhyveProcessStart)
(virBhyveProcessStop): Don't overwrite virCommand error.
* src/libvirt.c (virConnectAuthGainPolkit): Likewise.
* src/openvz/openvz_driver.c (openvzDomainGetBarrierLimit)
(openvzDomainSetBarrierLimit): Likewise.
* src/util/virebtables.c (virEbTablesOnceInit): Likewise.
* src/util/viriptables.c (virIpTablesOnceInit): Likewise.
* src/util/virnetdevveth.c (virNetDevVethCreate): Fix debug
message.
* src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Add comment.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSINodeUpdate): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Right now, a caller waiting for a child process either requires
the child to have status 0, or must use WIFEXITED() and friends
itself. But in many cases, we want the middle ground of treating
fatal signals as an error, and directly accessing the normal exit
value without having to use WEXITSTATUS(), in order to easily
detect an expected non-zero exit status. This adds the middle
ground to the low-level virProcessWait; the next patch will add
it to virCommand.
* src/util/virprocess.h (virProcessWait): Alter signature.
* src/util/virprocess.c (virProcessWait): Add parameter.
(virProcessRunInMountNamespace): Adjust caller.
* src/util/vircommand.c (virCommandWait): Likewise.
* src/util/virfile.c (virFileAccessibleAs): Likewise.
* src/lxc/lxc_container.c (lxcContainerHasReboot)
(lxcContainerAvailable): Likewise.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* tools/virt-login-shell.c (main): Likewise.
* tools/virsh-domain.c (cmdLxcEnterNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* tests/commandtest.c (test23): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The documentation of namespace callbacks was inconsistent on whether
it preserved positive return values. Now that we have a dedicated
EXIT_CANCELED to flag all errors before getting to the callback,
it is possible to use positive return values (not that any of the
current callers do, but it is better to match the docs).
Also, while vircommand.c is careful to close fds that a child should
not have, it's still better to be in the practice of setting
FD_CLOEXEC up front.
* src/util/virprocess.c (virProcessRunInMountNamespace): Tweak
return value to pass back non-zero status. Avoid leaking pipe fds
to other threads.
* src/util/virprocess.h: Fix comment.
Signed-off-by: Eric Blake <eblake@redhat.com>
Thanks to namespaces, we have a couple of places in the code
base that want to reflect a child exit status, including the
ability to detect death by a signal, back to a grandparent.
Best to make it a reusable function.
* src/util/virprocess.h (virProcessExitWithStatus): New prototype.
* src/libvirt_private.syms (util/virprocess.h): Export it.
* src/util/virprocess.c (virProcessExitWithStatus): New function.
* tests/commandtest.c (test23): Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
When a child fails without exec'ing, we want a well-known status;
best is to match what env(1), nice(1), su(1), and other wrapper
programs do. This patch adds enum values that later patches will
use, and sets up virFork as the first client of EXIT_CANCELED
for errors detected prior to even attempting exec, as well as
virExec to distinguish between a missing executable vs. a binary
that cannot be executed.
This is a slight semantic change in the unlikely case of a child
process failing to restore its signal mask - we now kill the
child with a known status instead of relying on the caller to
notice and do an appropriate _exit(). A subsequent patch will
make further cleanups based on an audit of all callers.
* src/internal.h (EXIT_CANCELED, EXIT_CANNOT_INVOKE)
(EXIT_ENOENT): New enum.
* src/util/vircommand.c (virFork): Document specific exit value if
child aborts early.
(virExec): Distinguish between various exec failures.
* tests/commandtest.c (test1): Enhance test.
(test22): New test.
Signed-off-by: Eric Blake <eblake@redhat.com>
While auditing all callers of virCommandRun, I noticed that nwfilter
code never paid attention to commands with a non-zero status; they
were merely passing a pointer to avoid spamming the logs with a
message about commands that might indeed fail. But proving this
required chasing through a lot of code; refactoring things to
localize the decision of whether to ignore non-zero status makes
it easier to prove that later changes to virFork don't negatively
affect this code.
While at it, I also noticed that ebiptablesRemoveRules would
actually report success if the child process failed for a
reason other than non-zero status, such as OOM.
* src/nwfilter/nwfilter_ebiptables_driver.c (ebiptablesExecCLI):
Change parameter from pointer to bool.
(ebtablesApplyBasicRules, ebtablesApplyDHCPOnlyRules)
(ebtablesApplyDropAllRules, ebtablesCleanAll)
(ebiptablesApplyNewRules, ebiptablesTearNewRules)
(ebiptablesTearOldRules, ebiptablesAllTeardown)
(ebiptablesDriverInitWithFirewallD)
(ebiptablesDriverTestCLITools, ebiptablesDriverProbeStateMatch):
Adjust all clients.
(ebiptablesRemoveRules): Likewise, and fix return value on failure.
Signed-off-by: Eric Blake <eblake@redhat.com>
Openstack Nova calls virConnectBaselineCPU() during initialization
of the instance to get a full list of CPU features.
This patch adds a stub to arm-specific code to handle
this request (no actual work is done).
Signed-off-by: Oleg Strikov <oleg.strikov@canonical.com>
When probing QEMU capabilities fails for a binary generate a
log message with MESSAGE_ID==8ae2f3fb-2dbe-498e-8fbd-012d40afa361.
This can be directly queried from journald based on the UUID
instead of needing string grep. This lets tools like libguestfs'
bug reporting tool trivially do automated sanity tests on the
host they're running on.
$ journalctl MESSAGE_ID=8ae2f3fb-2dbe-498e-8fbd-012d40afa361
Feb 21 17:11:01 localhost.localdomain lt-libvirtd[9196]:
Failed to probe capabilities for /bin/qemu-system-alpha:
internal error: Child process (LC_ALL=C LD_LIBRARY_PATH=
/home/berrange/src/virt/libvirt/src/.libs PATH=/usr/lib64/
ccache:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:
/usr/bin:/root/bin HOME=/root USER=root LOGNAME=root
/bin/qemu-system-alpha -help) unexpected exit status 127:
/bin/qemu-system-alpha: error while loading shared libraries:
libglapi.so.0: cannot open shared object file: No such file
or directory
$ journalctl MESSAGE_ID=8ae2f3fb-2dbe-498e-8fbd-012d40afa361 --output=json
{ ...snip...
"LIBVIRT_SOURCE" : "file",
"PRIORITY" : "3",
"CODE_FILE" : "qemu/qemu_capabilities.c",
"CODE_LINE" : "2770",
"CODE_FUNC" : "virQEMUCapsLogProbeFailure",
"MESSAGE_ID" : "8ae2f3fb-2dbe-498e-8fbd-012d40afa361",
"LIBVIRT_QEMU_BINARY" : "/bin/qemu-system-xtensa",
"MESSAGE" : "Failed to probe capabilities for /bin/qemu-system-xtensa:
internal error: Child process (LC_ALL=C LD_LIBRARY_PATH=/home/berrange
/src/virt/libvirt/src/.libs PATH=/usr/lib64/ccache:/usr/local/sbin:
/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin HOME=/root
USER=root LOGNAME=root /bin/qemu-system-xtensa -help) unexpected
exit status 127: /bin/qemu-system-xtensa: error while loading shared
libraries: libglapi.so.0: cannot open shared object file: No such
file or directory\n" }
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When a virError is raised, pass the error domain and code
onto the systemd journald using metadata fields.
This allows error messages to be queried by code eg
$ journalctl LIBVIRT_CODE=43
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The systemd journal expects log record PRIORITY values to
be encoded using the syslog compatible numbering scheme,
not libvirt's own native numbering scheme. We must therefore
apply a conversion.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The systemd journal accepts arbitrary user specified log
fields. These can be passed into virLogMessage via the
virLogMetadata structure. Allow up to 5 custom fields to
be reported by libvirt callers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch allows libvirt user to specify 'host-passthrough'
cpu mode while using qemu/kvm backend on arm (arm32).
It uses 'host' as a CPU model name instead of some other stub
(correct CPU detection is not implemented yet) to allow libvirt
user to specify 'host-model' cpu mode as well.
Signed-off-by: Oleg Strikov <oleg.strikov@canonical.com>
As of 0bd2ccdec an empty disk path for virDomainBlockStats (or the one
with Flags) is allowed meaning "get me overall summarized statistics".
However, running 'virsh domblkstat $dom' throws a misleading error:
# ./tools/virsh domblkstat dom
error: Failed to get block stats dom
error: invalid argument: invalid path:
while after this commit
# virsh domblkstat dom
error: Operation not supported: summary statistics are not supported yet
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Libvirt uses a domain name to fill in owner_name in sanlock_options in
virLockManagerSanlockAcquire. Unfortunately, owner_name is limited to
SANLK_NAME_LEN characters (including trailing '\0'), which means domains
with longer names fail to start when sanlock is enabled. However, we can
truncate the name when setting owner_name as explained by sanlock's
author:
Setting sanlk_options or the owner_name is unnecessary, and has very
little to no benefit. If you do provide something in owner_name, it can
be anything, sanlock doesn't care or use it.
If you run the command "sanlock status", the output will display a list
of clients connected to the sanlock daemon. This client list is
displayed as "pid owner_name" if the client has provided an owner_name
via sanlk_options. This debugging output is the only usage of
owner_name, so its only benefit is to potentially provide a more human
friendly output for debugging purposes.
Only tested on v7 but the v8 equivalent seems pretty obvious.
XEN_CAP_REGEX already accepts more than it should (e.g. x86_64p or x86_32be)
but I have stuck with the existing pattern.
With this I can create a guest from:
<domain type='xen'>
<name>libvirt-test</name>
<uuid>6343998e-9eda-11e3-98f6-77252a7d02f3</uuid>
<memory>393216</memory>
<currentMemory>393216</currentMemory>
<vcpu>1</vcpu>
<os>
<type arch='armv7l' machine='xenpv'>linux</type>
<kernel>/boot/vmlinuz-arm-native</kernel>
<cmdline>console=hvc0 earlyprintk debug root=/dev/xvda1</cmdline>
</os>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
<devices>
<disk type='block' device='disk'>
<source dev='/dev/marilith-n0/debian-disk'/>
<target dev='xvda1'/>
</disk>
<interface type='bridge'>
<mac address='8e:a7:8e:3c:f4:f6'/>
<source bridge='xenbr0'/>
</interface>
</devices>
</domain>
Using virsh create and I can destroy it too.
Currently virsh console fails with:
Connected to domain libvirt-test
Escape character is ^]
error: internal error: cannot find character device <null>
I haven't investigated yet.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
According to commit b4e0299d if networkAllocateActualDevice() was
successful, it will *always* allocate an iface->data.network.actual,
so we can use this during networkReleaseActualDevice() to know if
there is really anything to undo. We were properly using this
information to only decrement the network connections counter if it
had previously been incremented, but we were unconditionally
unplugging bandwidth and calling the "unplugged" network hook for
*all* interfaces (during qemuProcessStop()) whether they had been
previously plugged or not. This caused problems if a domain failed to
start at some time prior to all interfaces being allocated. (I
encountered this when an interface had a bandwidth floor set but no
inbound QoS).
This patch changes both the call to networkUnplugBandwidth() and the
call to networkRunHook() to only be called if there was a previous
call to "plug" for the same interface.
networkAllocateActualDevice() is called for *all* interfaces, not just
those with type='network'. In that case, it will jump down to its
validate: label immediately, without allocating anything. After
validation is done, two counters are potentially updated (one for the
network, and one for any particular physical device that is chosen),
and then networkRunHook() is called.
This patch refactors that code a slight bit so that networkRunHook()
doesn't get called if netdef is NULL (i.e. type != network) and to
place the conditional increment of dev->connections inside the "if
(netdef)" as well - dev can never be non-null if netdef is null
(because "dev" is the pointer to a device in a network's pool of
devices), so this doesn't have any functional effect, it just makes
the code clearer.
While running virscsitest, it was found that valgrind pointed out the following
memory leak:
==320== 5 bytes in 1 blocks are definitely lost in loss record 4 of 37
==320== at 0x4A069EE: malloc (vg_replace_malloc.c:270)
==320== by 0x3E6CE81171: strdup (strdup.c:43)
==320== by 0x4CB28DF: virStrdup (virstring.c:554)
==320== by 0x4CAC987: virSCSIDeviceSetUsedBy (virscsi.c:289)
==320== by 0x402321: test2 (virscsitest.c:100)
==320== by 0x403231: virtTestRun (testutils.c:199)
==320== by 0x402121: mymain (virscsitest.c:180)
==320== by 0x4039AD: virtTestMain (testutils.c:782)
==320== by 0x3E6CE1ED1C: (below main) (libc-start.c:226)
==320==
Introduced by commit fd243fc.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Consider dozen of LXC domains, each of them having this type of interface:
<interface type='network'>
<mac address='52:54:00:a7:05:4b'/>
<source network='default'/>
</interface>
When starting these domain in parallel, all workers may meet in
virNetDevVethCreate() where a race starts. Race over allocating veth
pairs because allocation requires two steps:
1) find first nonexistent '/sys/class/net/vnet%d/'
2) run 'ip link add ...' command
Now consider two threads. Both of them find N as the first unused veth
index but only one of them succeeds allocating it. The other one fails.
For such cases, we are running the allocation in a loop with 10 rounds.
However this is very flaky synchronization. It should be rather used
when libvirt is competing with other process than when libvirt threads
fight each other. Therefore, internally we should use mutex to serialize
callers, and do the allocation in loop (just in case we are competing
with a different process). By the way we have something similar already
since 1cf97c87.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Running ./autobuild.sh detected a mingw failure:
CCLD libvirt.la
Cannot export virCgroupGetPercpuStats: symbol not defined
Cannot export virCgroupSetOwner: symbol not defined
* src/util/vircgroup.c (virCgroupGetPercpuStats)
(virCgroupSetOwner): Implement stubs.
Signed-off-by: Eric Blake <eblake@redhat.com>
The shutdown handler may restart a domain when handling a reboot
event or when <on_*> is set to 'restart'. Restarting consists of
calling libxlVmCleanup followed by libxlVmStart. libxlVmStart will
emit a VIR_DOMAIN_EVENT_STARTED event, but the SHUTDOWN event is
not emitted until exiting the shutdown handler, after the STARTED
event.
This patch changes the logic a bit to queue the event at the start
of the shutdown action, ensuring it is queued before any subsequent
events that may be generated while executing the shutdown action.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The network hook script gets called whenever an interface is plugged
into or unplugged from a network, but even though the full XML of both
the network and the domain is included, there is no reasonable way to
determine what exact resources the plugged interface is using:
1) Prior to a recent patch which modified the status XML of interfaces
to include the information about actual hardware resources used, it
would be possible to scan through the domain XML output sent to the
hook, and from there find the correct interface, but that interface
definition would not include any runtime info (e.g. bandwidth or vlan
taken from a portgroup, or which physdev was used in case of a macvtap
network).
2) After the patch modifying the status XML of interfaces, the network
name would no longer be included in the domain XML, so it would be
completely impossible to determine which interface was the one being
plugged.
To solve that problem, this patch includes a single <interface>
element at the beginning of the XML sent to the network hook for
"plugged" and "unplugged" (just inside <hookData>) that is the status
XML of the interface being plugged. This XML will include all info
gathered from the chosen network and portgroup.
NB: due to hardcoded spaces in all of the device *Format() functions,
the <interface> element inside the <hookData> will be indented by 6
spaces rather than 2. I had intended to fix this, but it turns out
that to make virDomainNetDefFormat() indentation relative, I would
have to do the same to virDomainDeviceInfoFormat(), and that function
is called from 19 places - making that a prerequisite of this patch
would cause too many merge difficulties if we needed to backport
network hooks, so I chose to ignore the problem here and fix the
problem for *all* devices in a followup later.
Until now, the "live" XML status of an <interface type='network'>
device would always show the network information, rather than the
exact hardware device that was used. It would also show the name of
any portgroup the interface belonged to, rather than providing the
configuration that was derived from that portgroup. As an example,
given the following network definition:
[A]
<network>
<name>testnet</name>
<forward type='bridge' dev='p4p1_0'>
<interface dev='p4p1_0'/>
<interface dev='p4p1_1'/>
<interface dev='p4p1_2'/>
<interface dev='p4p1_3'/>
</forward>
<portgroup name='admin'>
<bandwidth>
<inbound average='1000' peak='5000' burst='1024'/>
<outbound average='128' peak='256' burst='256'/>
</bandwidth>
</portgroup>
</network>
and the following domain <interface>:
[B]
<interface type='network'>
<source network='testnet' portgroup='admin'/>
</interface>
the output of "virsh dumpxml $domain" while the domain was running
would yield something like this:
[C]
<interface type='network'>
<source network='testnet' portgroup='admin'/>
<target dev='macvtap0'/>
<alias name='net0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</interface>
In order to learn the exact bandwidth information of the interface, a
management application would need to retrieve the XML for testnet,
then search for the portgroup named "admin". Even worse, there was no
simple and standard way to learn which host physdev the macvtap0
device is attached to.
Internally, libvirt has always kept this information in the
virDomainDef that is held in memory, as well as storing it in the
(libvirt-internal-only) domain status XML (in
/var/run/libvirt/qemu/$domain.xml). In order to not confuse the runtime
"actual state" with the config of the device, it's internally stored
like this:
[D]
<interface type='network'>
<source network='testnet' portgroup='admin'/>
<actual type='direct'>
<source dev='p4p1_0' mode='bridge'/>
<bandwidth>
<inbound average='1000' peak='5000' burst='1024'/>
<outbound average='128' peak='256' burst='256'/>
</bandwidth>
</actual>
<target dev='macvtap0'/>
<alias name='net0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</interface>
This was never exposed outside of libvirt though, because I thought it
would be too awkward for a management application to need to look in
two places for the same information, but I also wasn't sure that it
would be okay to overwrite the config info (in this case "<source
network='testnet' portgroup='admin'/>") with the actual runtime info
(everything inside <actual> above).
Now we have a need for this information to be made available to
management applications (in particular, so that a network "plugged"
hook will have full information about the device that is being plugged
in), so it's time to take the leap and decide that it is acceptable
for the config info to be replaced with actual runtime state (but
*only* when reporting domain live status, *not* when saving state in
/var/run/libvirt/qemu/$domain.xml - that remains the same so that
there is no loss of information). That is what this patch does - once
applied, the output of "virsh dumpxml $domain" when the domain is
running will contain something like this:
[E]
<interface type='direct'>
<source dev='p4p1_0' mode='bridge'/>
<bandwidth>
<inbound average='1000' peak='5000' burst='1024'/>
<outbound average='128' peak='256' burst='256'/>
</bandwidth>
<target dev='macvtap0'/>
<alias name='net0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</interface>
In effect, everything that is internally stored within <actual> is
moved up a level to where a management application will expect
it. This means that the management application will only look in a
single place to learn - the type of interface in use, the name of the
physdev (if relevant), the <bandwidth>, <vlan>, and <virtualport>
settings in use.
The potential downside is that a management app looking at this output
will not see that the physdev 'p4p1_0' was actually allocated from the
network named 'testnet', or that the bandwidth numbers were taken from
the portgroup 'admin'. However, if they are interested in that info,
they can always get the "inactive" XML for the domain.
An example of where this could cause problems is in virt-manager's
network device display, which shows the status of the device, but
allows you to edit that status info and save it as the new
config. Previously virt-manager would always display the information
in example [C] above, and allow editing that. With this patch, it will
instead display what is in [E] and allow editing it directly, which
could lead to some confusion. I would suggest that virt-manager have
an "edit" button which would change the display from the "live" xml to
the "inactive" xml, so that editing would be done on that; such a
change would both handle the new situation, and also be compatible
with older releases.
This function is currently only called from one place, but in a
subsequent patch will be called from a 2nd place.
The new function exactly replicates the original behavior of the part
of virDomainActualNetDefFormat() that it replaces, but takes a
virDomainNetDefPtr instead of virDomainActualNetDefPtr, and uses the
virDomainNetGetActual*() functions whenever possible, rather than
reaching into def->data.network.actual - this is to be sure that we
are reporting exactly what is being used internally, just in case
there are any discrepancies (there shouldn't be).
This moves the call to virNetDevBandwidthFormat() in
virDomainNetDefFormat() to be called right after the call to
virNetDevVPortProfileFormat(), so that a single chunk of that function
can be placed inside an if that conditionally calls
virDomainActualNetDefContentsFormat() instead (next patch). The
re-ordering necessitates modifying a couple of test data files.
Other *Format() functions (e.g. virNetDevBandwidthFormat()) return
with no action when called with a NULL *Def pointer. This makes
virNetDevVlanFormat() consistent with that behavior.
In practice, if a virDomainNetDef has a virDomainActualNetDef
allocated, the ActualNetDef will *always* contain the bandwidth and
vlan data from the NetDef (unless there was also a portgroup involved
- see networkAllocateActualDevice()).
However, virDomainNetGetActual(Bandwidth|Vlan)() were coded to make it
appear as if it might be possible to have a valid bandwidth/vlan in
the NetDef, but a NULL in the ActualNetDef. Believing this un-truth
could lead to writing unnecessarily defensive code when dealing with
the virDomainGetActual*() functions, so this patch makes it more
obvious:
If there is an ActualNetDef, it will always have a copy of the
various appropriate bits from its parent NetDef, and the
virDomainGetActual* function will *always* return the data from the
ActualNetDef, not from the NetDef.
The reason for this effective-NOP patch is that a subsequent patch to
change virDomainNetDefFormat will rely on the above rule.
These timeout values make librados/librbd return -ETIMEDOUT when a
operation is blocking due to a failing/unreachable Ceph cluster.
By having the operations time out libvirt will not block.
The libxl driver was ignoring the <on_*> domain event configuration,
causing e.g. a domain to be rebooted even when on_reboot is set to
destroy.
This patch honors the <on_*> configuration in the shutdown event
handler.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This function is needed for user namespaces, where we need to chmod()
the cgroup to the initial uid/gid such that systemd is allowed to
use the cgroup.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a virStringSearch method to virstring.{c,h} which performs
a regex match against a string and returns the matching substrings.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Systemd does not forget about the cases, where client service needs to
wait for daemon service to initialize and start accepting new clients.
Setting a dependency in client is not enough as systemd doesn't know
when the daemon has initialized itself and started accepting new
clients. However, it offers a mechanism to solve this. The daemon needs
to call a special systemd function by which the daemon tells "I'm ready
to accept new clients". This is exactly what we need with
libvirtd-guests (client) and libvirtd (daemon). So now, with this
change, libvirt-guests.service is invoked not any sooner than
libvirtd.service calls the systemd notify function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1031696
When creating a new domain, we let systemd know about it by calling
CreateMachine() function via dbus. Systemd then creates a scope and
places domain into it. However, later when the host is shutting
down, systemd computes the shutdown order to see what processes can
be shut down in parallel. And since we were not setting
dependencies at all, the slices (and thus domains) were most likely
killed before libvirt-guests.service. So user domains that had to
be saved, shut off, whatever were in fact killed. This problem can
be solved by letting systemd know that scopes we're creating must
not be killed before libvirt-guests.service.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 6515889 broke the build on FreeBSD:
In function `qemuDomainGetCPUStats':
/../../src/qemu/qemu_driver.c:16102:
undefined reference to `virCgroupGetDomainTotalCpuStats'
https://bugzilla.redhat.com/show_bug.cgi?id=1038363
If a domain has a different maximum for persistent and live maxmem
or max vcpus, then it is possible to hit cases where libvirt
refuses to adjust the current values or gets halfway through
the adjustment before failing. Better is to determine up front
if the change is possible for all requested flags.
Based on an idea by Geoff Franks.
* src/qemu/qemu_driver.c (qemuDomainSetMemoryFlags): Compute
correct maximum if both live and config are being set.
(qemuDomainSetVcpusFlags): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The virDomainGetRootFilesystem method can be generalized to allow
any filesystem path to be obtained.
While doing this, start a new test case for purpose of testing various
helper methods in the domain_conf.{c,h} files, such as this one.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCgroupXXX APIs' return value must be checked for
being less than 0, not equal to 0.
An VIR_ERR_OPERATION_INVALID error must also be raised
when the VM is not running to prevent a crash on NULL
priv->cgroup field.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
And provide domain summary stat in that case, for lxc backend.
Use case is a container inheriting all devices from the host,
e.g. when doing application containerization.
Destroying a suspended domain needs special action.
We cannot simply terminate all process because they are frozen.
Do deal with that we send them SIGKILL and thaw them.
Upon wakeup the process sees the pending signal and dies immediately.
Signed-off-by: Richard Weinberger <richard@nod.at>
IN6ADDR_ANY_INIT does not seem to be working as expected on MinGW:
error: missing braces around initializer [-Werror=missing-braces]
.sin6_addr = IN6ADDR_ANY_INIT,
Use the in6addr_any variable instead.
Reported by Daniel P. Berrange.
Currently, networkRunHook() is called in networkAllocateActualDevice and
friends. These functions, however, doesn't necessarily work on networks,
For example, if domain's interface is defined in this fashion:
<interface type='bridge'>
<mac address='52:54:00:0b:3b:16'/>
<source bridge='virbr1'/>
<model type='rtl8139'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/>
</interface>
The networkAllocateActualDevice jumps directly onto 'validate' label as
the interface is not type of 'network'. Hence, @network is left
initialized to NULL and networkRunHook(network, ...) is called. One of
the things that the hook function does is dereference @network. Soupir.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Dumping a domain's core can take considerable time. Use the
recently added job functions and unlock the virDomainObj while
dumping core.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Saving domain memory and cpu state can take considerable time.
Use the recently added job functions and unlock the virDomainObj
while saving the domain.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When explicitly destroying a domain (libxlDomainDestroyFlags), or
handling an out-of-band domain shutdown event, cleanup the domain
in the context of a job. Introduce libxlVmCleanupJob to wrap
libxlVmCleanup in a job block.
Large balloon operation can be time consuming. Use the recently
added job functions and unlock the virDomainObj while ballooning.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Creating a large domain could potentially be time consuming. Use the
recently added job functions and unlock the virDomainObj while
the create operation is in progress.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This function, which only has five call sites, simply calls
libxl_domain_destroy and libxlVmCleanup. Call those functions
directly at the call sites, allowing more control over how a
domain is destroyed and cleaned up. This patch maintains the
existing semantic, leaving changes to a subsequent patch.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This patch changes network device type used by default from rtl8139
to virtio when architecture type is aarch64 and machine type is virt.
Qemu doesn't support any other machine types for aarch64 right now and
we can't make any other aarch64-specific tuning in this function yet.
Signed-off-by: Oleg Strikov <oleg.strikov@canonical.com>
At this point it has a limited functionality and is highly
experimental. Supported domain operations are:
* define
* start
* destroy
* dumpxml
* dominfo
It's only possible to have only one disk device and only one
network, which should be of type bridge.
There is no keyboard working on PPC64 and PS2 mouse is only for X86
when graphics are enabled.
Add a USB keyboard and USB mouse for PPC64 when graphics are enabled.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Format qemu command line for USB keyboard
and add test cases for it.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
PS2 devices only work on X86 platform, other platforms may need
USB devices instead. Athough it doesn't influence the QEMU command line,
it's not right to add PS2 mouse/keyboard for non-X86 platform.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
There is no keyboard support currently in libvirt.
For some platforms (PPC64 QEMU) this makes graphics unusable,
since the keyboard is not implicit and it can't be added via libvirt.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The networkNotifyActualDevice function is accepting two arguments, not
one:
qemu/qemu_process.c: In function 'qemuProcessNotifyNets':
qemu/qemu_process.c:2776:47: error: macro "networkNotifyActualDevice" passed 2 arguments, but takes just 1
if (networkNotifyActualDevice(def, net) < 0)
^
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
aebbcdd didn't change the non-linux definition of the function,
breaking the build on FreeBSD:
../../src/util/virinitctl.c:164: error: conflicting types for
'virInitctlSetRunLevel'
../../src/util/virinitctl.h:40: error: previous declaration of
'virInitctlSetRunLevel' was here
Basically, the idea is copied from domain code, where tainting
exists for a while. Currently, only one taint reason exists -
VIR_NETWORK_TAINT_HOOK to mark those networks which caused invoking
of hook script.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There might be some use cases, where user wants to prepare the host or
its environment prior to starting a network and do some cleanup after
the network has been shut down. Consider all the functionality that
libvirt doesn't currently have as an example what a hook script can
possibly do.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the next patch I'm going to need the network format function that
takes virBuffer as argument. However, slightly change of name is more
appropriate then: virNetworkDefFormatBuf to match the rest of functions
that format an object to buffer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Rewrite multiple hotunplug functions to to use the
virProcessRunInMountNamespace helper. This avoids
risk of a malicious guest replacing /dev with an absolute
symlink, tricking the driver into changing the host OS
filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rewrite lxcDomainAttachDeviceHostdevMiscLive function
to use the virProcessRunInMountNamespace helper. This avoids
risk of a malicious guest replacing /dev with a absolute
symlink, tricking the driver into changing the host OS
filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rewrite lxcDomainAttachDeviceHostdevStorageLive function
to use the virProcessRunInMountNamespace helper. This avoids
risk of a malicious guest replacing /dev with a absolute
symlink, tricking the driver into changing the host OS
filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rewrite lxcDomainAttachDeviceHostdevSubsysUSBLive function
to use the virProcessRunInMountNamespace helper. This avoids
risk of a malicious guest replacing /dev with a absolute
symlink, tricking the driver into changing the host OS
filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rewrite lxcDomainAttachDeviceDiskLive function to use the
virProcessRunInMountNamespace helper. This avoids risk of
a malicious guest replacing /dev with a absolute symlink,
tricking the driver into changing the host OS filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use helper virProcessRunInMountNamespace in lxcDomainShutdownFlags and
lxcDomainReboot. Otherwise, a malicious guest could use symlinks
to force the host to manipulate the wrong file in the host's namespace.
Idea by Dan Berrange, based on an initial report by Reco
<recoverym4n@gmail.com> at
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=732394
Signed-off-by: Eric Blake <eblake@redhat.com>
Implement virProcessRunInMountNamespace, which runs callback of type
virProcessNamespaceCallback in a container namespace. This uses a
child process to run the callback, since you can't change the mount
namespace of a thread. This implies that callbacks have to be careful
about what code they run due to async safety rules.
Idea by Dan Berrange, based on an initial report by Reco
<recoverym4n@gmail.com> at
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=732394
Signed-off-by: Daniel Berrange <berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Add a helper function which takes a file path and ensures
that all directory components leading up to the file exist.
IOW, it strips the filename part of the path and passes
the result to virFileMakePath.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The check for whether the cgroup devices ACL is available is
done quite late during LXC hotplug - in fact after the device
node is already created in the container in some cases. Better
to do it upfront so we fail immediately.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC disk hotplug code was allowing block or character devices
to be given as disk. A disk is always a block device.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When detaching a USB device from an LXC guest we must remove
the device from the cgroup ACL. Unfortunately we were telling
the cgroup code to use the guest /dev path, not the host /dev
path, and the guest device node had already been unlinked.
This was, however, fortunate since the code passed &priv->cgroup
instead of priv->cgroup, so would have crash if the device node
were accessible.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
After hotplugging a USB device, the LXC driver forgot
to add the device def to the virDomainDefPtr.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC code missed the 'usb' component out of the path
/dev/bus/usb/$BUSNUM/$DEVNUM, so it failed to actually
setup cgroups for the device. This was in fact lucky
because the call to virLXCSetupHostUsbDeviceCgroup
was also mistakenly passing '&priv->cgroup' instead of
just 'priv->cgroup'. So once the path is fixed, libvirtd
would then crash trying to access the bogus virCgroupPtr
pointer. This would have been a security issue, were it
not for the bogus path preventing the pointer reference
being reached.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virDomainDefCompatibleDevice blocks use of USB if no USB
controller is present. This is not correct for containers
since devices can be assigned directly regardless of any
controllers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently, there's just one place where we care if hook script is
changing the domain XML: migration hook for incoming migration. In
all other places where a hook script is executed, we don't read the
XML back from the script.
Anyway, the hook script can alter domain XML and hence we should taint
it if the script did.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This new flag is to be used for tainting domains which
XML definition was altered at runtime by a hook script.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The internal pools were an idea in one of the first iterations of the
gluster series, which we decided not to use. Somehow the patch still
got pushed. Remove it as the internal flag isn't needed.
This reverts commit 362da8209d.
Also try to bind on IPv6 to check if the port is occupied.
Change the mocked bind in the test to return EADDRINUSE
for some ports only for the IPv4/IPv6 socket if we're testing
on a host with IPv6 compiled in.
Also mock socket() to make it fail with EAFNOTSUPPORTED
if LIBVIRT_TEST_IPV4ONLY is set in the environment, to
simulate a host without IPv6 support in the kernel. The
tests are repeated again with this variable set.
https://bugzilla.redhat.com/show_bug.cgi?id=1025407
In a44b7b87bc I've introduced a function
that initializes a storage file wrapper object on gluster based volumes.
The initialization function leaks the private data pointer in case of
failure. This patch fixes it.
Reported by John Ferlan.
In commit e32268184b I accidentally added
twice a typedef for virStorageFileBackend when I moved it between files
across patch iterations. The double declaration breaks build on older
compilers in RHEL5 and FreeBSD.
Remove the spurious definition.
Add support for gluster backed images as sources for snapshots in the
qemu driver. This will also simplify adding further network backed
volumes as sources for snapshot in case qemu will support them.
Use the new storage driver APIs to delete snapshot backing files in case
of failure instead of directly relying on "unlink". This will help us in
the future when we will be adding network based storage without local
representation in the host.
Add APIs that will allow to use the storage driver to assist in
operations on files even for remote filesystems without native
representation as files in the host.
All the data for getting the actual type is present in the snapshot
config. There is no need to have this function private to the qemu
driver and it will be re-used later in other parts of libvirt
All the data for getting the actual type is present in the domain
config. There is no need to have this function private to the qemu
driver and it will be re-used later in other parts of libvirt
The problem with VLAN is that the user still has to manually create the
vlan interface on the host. Then the generated configuration will use
it as a nerwork hostdev device. So the generated configurations of the
following two fragments are equivalent (see rhbz#1059637).
lxc.network.type = phys
lxc.network.link = eth0.5
lxc.network.type = vlan
lxc.network.link = eth0
lxc.network.vlan.id = 5
Some of the LXC configuration properties aren't migrated since they
would only cause problems in libvirt-lxc:
* lxc.network.ipv[46]: LXC driver doesn't setup IP address of guests,
see rhbz#1059624
* lxc.network.name, see rhbz#1059630
If no network configuration is provided, LXC only provides the loopback
interface. To match this, we need to use the privnet feature. LXC will
also define a 'none' network type in its 1.0.0 version that fits
libvirt LXC driver's default.
LXC rootfs can be either a directory or a block device or an image
file. The first two types have been implemented, but the image file is
still to be done since LXC auto-guesses the file format at mount time
and the LXC driver doesn't support the 'auto' format.
This function aims at converting LXC configuration into a libvirt
domain XML description to help users migrate from LXC to libvirt.
Here is an example of how the lxc configuration works:
virsh -c lxc:/// domxml-from-native lxc-tools /var/lib/lxc/migrate_test/config
It is possible that some parts couldn't be properly mapped into a
domain XML fragment, so users should carefully review the result
before creating the domain.
fstab files in lxc.mount lines will need to be merged into the
configuration file as lxc.mount.entry.
As we can't know the amount of memory of the host, we have to set a
default value for max_balloon that users will probably want to adjust.
virConf now honours a VIR_CONF_FLAG_LXC_FORMAT flag to handle LXC
configuration files. The differences are that property names can
contain '.' character and values are all strings without any bounding
quotes.
Provide a new virConfWalk function calling a handler on all non-comment
values. This function will be used by the LXC conversion code to loop
over LXC configuration lines.
Commit 57ddcc23 (v0.9.11) introduced the pmwakeup event, with
an optional 'reason' field reserved for possible future expansion.
But it failed to wire the field through RPC, so even if we do
add a reason in the future, we will be unable to get it back
to the user.
Worse, commit 7ba5defb (v1.0.0) repeated the same mistake with
the pmsuspend_disk event.
As long as we are adding new RPC calls, we might as well fix
the events to actually match the signature so that we don't have
to add yet another RPC in the future if we do decide to start
using the reason field.
* src/remote/remote_protocol.x
(remote_domain_event_callback_pmwakeup_msg)
(remote_domain_event_callback_pmsuspend_msg)
(remote_domain_event_callback_pmsuspend_disk_msg): Add reason
field.
* daemon/remote.c (remoteRelayDomainEventPMWakeup)
(remoteRelayDomainEventPMSuspend)
(remoteRelayDomainEventPMSuspendDisk): Pass reason to client.
* src/conf/domain_event.h (virDomainEventPMWakeupNewFromDom)
(virDomainEventPMSuspendNewFromDom)
(virDomainEventPMSuspendDiskNewFromDom): Require additional
parameter.
* src/conf/domain_event.c (virDomainEventPMClass): New class.
(virDomainEventPMDispose): New function.
(virDomainEventPMWakeupNew*, virDomainEventPMSuspendNew*)
(virDomainEventPMSuspendDiskNew*)
(virDomainEventDispatchDefaultFunc): Use new class.
* src/remote/remote_driver.c (remoteDomainBuildEvent*PM*): Pass
reason through.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Following the patterns established by lifecycle events, this
creates all the new RPC calls needed to pass callback IDs
for every domain event, and changes the limits in client and
server codes to use modern style when possible.
I've tested all combinations: both 'old client and new server'
and 'new client and old server' continue to work with the old
RPCs, and 'new client and new server' benefit from server-side
filtering with the new RPCs.
* src/remote/remote_protocol.x (REMOTE_PROC_DOMAIN_EVENT_*): Add
REMOTE_PROC_DOMAIN_EVENT_CALLBACK_* counterparts.
* daemon/remote.c (remoteRelayDomainEvent*): Send callbackID via
newer RPC when used with new-style registration.
(remoteDispatchConnectDomainEventCallbackRegisterAny): Extend to
cover all domain events.
* src/remote/remote_driver.c (remoteDomainBuildEvent*): Add new
Callback and Helper functions.
(remoteEvents): Match order of RPC numbers, register new handlers.
(remoteConnectDomainEventRegisterAny)
(remoteConnectDomainEventDeregisterAny): Extend to cover all
domain events.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
The counterpart to the server RPC additions; here, a single
function can serve both old and new calls, while incoming
events must be serviced by two different functions. Again,
some wise choices in our XDR made it easier to share code
managing similar events.
While this only supports lifecycle events, it covers the
harder part of how Register and RegisterAny interact; the
remaining 15 events will be a mechanical change in a later
patch. For Register, we now have a callbackID locally for
more efficient cleanup if the RPC fails; we also prefer to
use the newer RPC where we know it is supported (the older
RPC must be used if we don't know if RegisterAny is
supported).
* src/remote/remote_driver.c (remoteEvents): Register new RPC
event handler.
(remoteDomainBuildEventLifecycle): Move guts...
(remoteDomainBuildEventLifecycleHelper): ...here.
(remoteDomainBuildEventCallbackLifecycle): New function.
(remoteConnectDomainEventRegister)
(remoteConnectDomainEventDeregister)
(remoteConnectDomainEventRegisterAny)
(remoteConnectDomainEventDeregisterAny): Use new RPC when supported.
We want to convert over to server-side events, even for older
APIs. To do that, the client side of the remote driver wants
to distinguish between legacy virConnectDomainEventRegister and
normal virConnectDomainEventRegisterAny, while knowing the
client callbackID and the server's serverID for both types of
registration. The client also needs to probe whether the
server supports server-side filtering. However, for ease of
review, we don't actually use the new RPCs until a later patch.
* src/conf/object_event_private.h (virObjectEventStateCallbackID):
Add parameter.
* src/conf/object_event.c (virObjectEventCallbackListAddID)
(virObjectEventStateRegisterID): Separate legacy from callbackID.
(virObjectEventStateCallbackID): Pass through parameter.
(virObjectEventCallbackLookup): Let legacy and global domain
lifecycle events share a common remoteID.
* src/conf/network_event.c (virNetworkEventStateRegisterID):
Update caller.
* src/conf/domain_event.c (virDomainEventStateRegister)
(virDomainEventStateRegisterID, virDomainEventStateDeregister):
Likewise.
(virDomainEventStateRegisterClient)
(virDomainEventStateCallbackID): Implement new functions.
* src/conf/domain_event.h (virDomainEventStateRegisterClient)
(virDomainEventStateCallbackID): New prototypes.
* src/remote/remote_driver.c (private_data): Add field.
(doRemoteOpen): Probe server feature.
(remoteConnectDomainEventRegister)
(remoteConnectDomainEventRegisterAny): Use new function.
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch adds some new RPC call numbers, but for ease of review,
they sit idle until a later patch adds the client counterpart to
drive the new RPCs. Also for ease of review, I limited this patch
to just the lifecycle event; although converting the remaining
15 domain events will be quite mechanical. On the server side,
we have to have a function per RPC call, largely with duplicated
bodies (the key difference being that we store in our callback
opaque pointer whether events should be fired with old or new
style); meanwhile, a single function can drive multiple RPC
messages. With a strategic choice of XDR struct layout, we can
make the event generation code for both styles fairly compact.
I debated about adding a tri-state witness variable per
connection (values 'unknown', 'legacy', 'modern'). It would start
as 'unknown', move to 'legacy' if any RPC call is made to a legacy
event call, and move to 'modern' if the feature probe is made;
then the event code could issue an error if the witness state is
incorrect (a legacy RPC call while in 'modern', a modern RPC call
while in 'unknown' or 'legacy', and a feature probe while in
'legacy' or 'modern'). But while it might prevent odd behavior
caused by protocol fuzzing, I don't see that it would prevent
any security holes, so I considered it bloat.
Note that sticking @acl markers on the new RPCs generates unused
functions in access/viraccessapicheck.c, because there is no new
API call that needs to use the new checks; however, having a
consistent .x file is worth the dead code.
* src/libvirt_internal.h (VIR_DRV_FEATURE_REMOTE_EVENT_CALLBACK):
New feature.
* src/remote/remote_protocol.x
(REMOTE_PROC_CONNECT_DOMAIN_EVENT_CALLBACK_REGISTER_ANY)
(REMOTE_PROC_CONNECT_DOMAIN_EVENT_CALLBACK_DEREGISTER_ANY)
(REMOTE_PROC_DOMAIN_EVENT_CALLBACK_LIFECYCLE): New RPCs.
* daemon/remote.c (daemonClientCallback): Add field.
(remoteDispatchConnectDomainEventCallbackRegisterAny)
(remoteDispatchConnectDomainEventCallbackDeregisterAny): New
functions.
(remoteDispatchConnectDomainEventRegisterAny)
(remoteDispatchConnectDomainEventDeregisterAny): Mark legacy use.
(remoteRelayDomainEventLifecycle): Change message based on legacy
or new use.
(remoteDispatchConnectSupportsFeature): Advertise new feature.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
virGetStorageVol can return NULL on out-of-memory. If it does, cleanly
abort the volume clone operation.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
This reverts commit 67ccf91bf2.
We only generate the volume key after we've built it, but the storage
driver expects it to be filled after createVol finishes.
Squash the volume building back with creating to fulfill this
expectation.
Openstack Nova calls virConnectBaselineCPU() during initialization
of the instance to get a full list of CPU features.
This patch adds a stub to aarch64-specific code to handle
this request (no actual work is done). That's enough to have
this stub with limited functionality because qemu/kvm backend
supports only 'host-passthrough' cpu mode on aarch64.
Signed-off-by: Oleg Strikov <oleg.strikov@canonical.com>
A small fix for the possiblitiy of jumping to an error path before
registering for domain events, preventing receiving important ones
like shutdown and death.
This shadows the index function on some systems (RHEL-6.4, FreeBSD 9):
../../src/conf/capabilities.c: In function 'virCapabilitiesGetCpusForNode':
../../src/conf/capabilities.c:1005: warning: declaration of'index'
shadows a global declaration [-Wshadow]
/usr/include/strings.h:57: warning: shadowed declaration is here [-Wshadow]
On some platforms like IBM PowerNV the NUMA node numbers can be
non-sequential. For eg. numactl --hardware o/p from such a machine looks
as given below
node distances:
node 0 1 16 17
0: 10 40 40 40
1: 40 10 40 40
16: 40 40 10 40
17: 40 40 40 10
The NUMA nodes are 0,1,16,17
Libvirt uses sequential index as NUMA node numbers and this can
result in crash or incorrect results.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
Add a new backend for any character device. This backend uses channel
in spice connection. This channel is similar to spicevmc, but
all-purpose in contrast to spicevmc.
Apart from spicevmc, spiceport-backed chardev will not be formatted
into the command-line if there is no spice to use (with test for that
as well). For this I moved the def->graphics counting to the start
of the function so its results can be used in rest of the code even in
the future.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch is here just to ease the code review and make related
changes look more sensible. Apart from removing the condition this is
merely a whitespace (indentation) change.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Limiting ourselves to qemu without QEMU_CAPS_DEVICE capability, we
used '-serial none' only if there was no serial device defined in the
domain XML. This means that if we want to have a possibility of the
device being defined in XML, but not used in the command-line
(e.g. when it's pointless), we'll fail to attach '-serial none' to the
command-line (when skipping the device's command-line building and the
device being the only one).
Since there is no such device, this patch doesn't actually do
anything, but enables easier future additions in this manner.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add a new character device backend called 'spiceport' that uses
spice's channel for communications and apart from spicevmc can be used
as a backend for any character device from libvirt's point of view.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This new RBD format supports snapshotting and cloning. By having
libvirt create images in format 2 end-users of the created images
can benefit from the new RBD format.
Older versions of libvirt can work with this new RBD format as long
as librbd supports format 2. RBD format is supported by librbd since
version 0.56 (Ceph Bobtail).
Signed-off-by: Wido den Hollander <wido@widodh.nl>
When restarting sheepdog pool, all volumes are missing.
This patch add automatically all volume from the added pool.
Adding last Daniel P. Berrange's syntaxes correction.
Adding vol on separeted function 'inspired' from parallels_storage :
parallelsAddDiskVolume
In order to make a client-only build successful on RHEL4 (yes, you
read that correctly!), commit 3ed2e54 modified src/util/virnetdev.c so
that the functional version of virNetDevGetVLanID() was only compiled
if GET_VLAN_VID_CMD was defined. However, it is *never* defined, but
is only an enum value, so the proper version was no longer compiled
even on platforms that support it. This resulted in the vlan tag not
being properly set for guest traffic on VEPA mode guest macvtap
interfaces that were bound to a vlan interface (that's the only place
that libvirt currently uses virNetDevGetVLanID)
Since there is no way to compile conditionally based on the presence
of an enum value, this patch modifies configure.ac to check for said
enum value with AC_CHECK_DECLS(), which #defines
HAVE_DECL_GET_VLAN_VID_CMD to 1 if it's successful compiling a test
program that uses GET_VLAN_VID_CMD (and still #defines it, but to 0,
if it's not successful). We can then make the compilation of
virNetDevGetVLanID() conditional on the value of
HAVE_DECL_GET_VLAN_VID_CMD.
Reset line numbering on each input file in check-aclrules.pl. Otherwise
it reports wrong line numbers in its error messages.
Signed-off-by: Yuri Myasoedov <ymyasoedov@yandex.ru>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In the network status XML we may have the <floor/> element with the
'sum' attribute. The attribute represents sum of all 'floor'-s of
computed over each interface connected to the network (this is needed to
guarantee certain bandwidth for certain domain). The sum is therefore a
number. However, if the number was mangled (e.g. by an user's
interference to network status file), we've just ignored it without
refusing to parse such file. This was all due to 'goto error' missing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The code took into account only the global permissions. The domains now
support per-vm DAC labels and per-image DAC labels. Use the most
specific label available.
The lack of debug printings might be frustrating in the future.
Moreover, this function doesn't follow the usual pattern we have in the
rest of the code:
int ret = -1;
/* do some work */
ret = 0;
cleanup:
/* some cleanup work */
return ret;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add a new <timer> for the HyperV reference time counter enlightenment
and the iTSC reference page for Windows guests.
This feature provides a paravirtual approach to track timer events for
the guest (similar to kvmclock) with the option to use real hardware
clock on systems with a iTSC with compensation across various hosts.
According to the documentation various timer options are only supported
by certain timer types. Add a post parse check to verify that the user
didn't specify invalid options.
Also fix the qemu command line parsing function to set correct default
values for the kvmclock timer so that it passes the new check.
According to the documentation describing various tunables for domain
timers not all the fields are supported by all the driver types. Express
these in the RNG:
- rtc, platform: Only these support the "track" attribute.
- tsc: only one to support "frequency" and "mode" attributes
- hpet, pit: tickpolicy/catchup attribute/element
- kvmclock: no extra attributes are supported
Additionally the attributes of the <catchup> element for
tickpolicy='catchup' are optional according to the parsing code. Express
this in the XML and fix a spurious space added while formatting the
<catchup> element and add tests for it.
Coverity complains about "USE_AFTER_FREE" due to how virPCIDeviceSetStubDriver
"could" return either -1, 0, or 1 from the VIR_STRDUP() and then possibly makes
a call to virPCIDeviceDetach().
The only way this could happen is if NULL were passed as the "driver" name
and virStrdup() returned 0. Since the calling functions check < 0 on the
initial function call, the 0 possibility causes Coverity to complain.
To fix this - enforce that the second parameter is not NULL using
ATTRIBUTE_NONNULL(2) for the function prototype, then in virPCIDeviceDetach
add an sa_assert(dev->stubDriver). This will result in Coverity not complaining
any more.
Couple of codepaths shared the same code which can be moved out to a
function and on one of such places, qemuMigrationConfirmPhase(), the
domain was resumed even if it wasn't running before the migration
started.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1057407
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
libxlDomainRestoreFlags acquires the driver lock while reading the
domain config from the save file and adding it to
libxlDriverPrivatePtr->domains. But virDomainObjList provides
self-locking APIs, so remove the needless driver locking.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
If available, let libxl handle reaping any children it creates by
specifying libxl_sigchld_owner_libxl_always_selective_reap. This
feature was added to improve subprocess handling in libxl when used
in an application that does not install a SIGCHLD handler like
libvirt
http://lists.xen.org/archives/html/xen-devel/2014-01/msg01555.html
Prior to this patch, it is possible to hit asserts in libxl when
reaping subprocesses, particularly during simultaneous operations
on multiple domains. With this patch, and the corresponding changes
to libxl, I no longer see the asserts. Note that the libxl changes
will be included in Xen 4.4.0. Previous Xen versions will be
susceptible to hitting the asserts even with this patch applied to
the libvirt libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Handling the domain shutdown event within the event handler seems
a bit unfair to libxl's event machinery. Domain "shutdown" could
take considerable time. E.g. if the shutdown reason is reboot,
the domain must be reaped and then started again.
Spawn a shutdown handler thread to do this work, allowing libxl's
event machinery to go about its business.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Due to some misunderstanding of requirements libxl places on timer
handling, I introduced the half-brained idea of maintaining a list
of timeouts that the driver could force to expire before freeing a
libxlDomainObjPrivate (and hence libxl_ctx). But testing all
the latest versions of Xen supported by the libxl driver (4.2.3,
4.3.1, 4.4.0 RC3), I see that libxl will handle this just fine and
there is no need to force expiration behind libxl's back. Indeed it
may be harmful to do so.
This patch removes the timer list, allowing libxl to handle cleanup
of its timer registrations.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When libxl registers an FD with the libxl driver, the refcnt of the
associated libxlDomainObjPrivate object is incremented. The refcnt
is decremented when libxl deregisters the FD. But some FDs are only
deregistered when their libxl ctx is freed, which unfortunately is
done in the libxlDomainObjPrivate dispose function. With references
held by the FDs, libxlDomainObjPrivate is never disposed.
I added the ref/unref in FD registration/deregistration when adding
the same in timer registration/deregistration. For timers, this
is a simple approach to ensuring the libxlDomainObjPrivate is not
disposed prior to their expirtation, which libxl guarantees will
occur. It is not needed for FDs, and only causes
libxlDomainObjPrivate to leak.
This patch removes the reference on libxlDomainObjPrivate for FD
registrations, but retains them for timer registrations. Tested on
the latest releases of Xen supported by the libxl driver: 4.2.3,
4.3.1, and 4.4.0 RC3.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This commit allows to attach/detach a <filesystem> device in qemu. For
this purpose I'm introducing two new functions: virDomainFSInsert() and
virDomainFSRemove() and adding necessary code in the qemu driver. It
compares filesystems based on their "destination" folder. So if two
filesystems share the same destination, they are considered equal and
the qemu driver would reject the insertion.
Signed-off-by: Matthieu Coudron <mattator@gmail.com>
If virDomainMemoryStats was run on a domain with virtio balloon driver
running on an old qemu which supports QMP but does not support qom-list
QMP command, libvirtd would crash. The reason is we did not check if
qemuMonitorJSONGetObjectListPaths failed and moreover we even stored its
result in an unsigned integer type.
When attempting a blockcommit from the top layer, the base argument
passed is NULL. This will be dereferenced when attempting a commit with
an empty image chain. Output the real volume path instead:
virsh blockcommit --verbose --path vda --domain DOMNAME --wait
error: invalid argument: top '/path/somefile' in chain for 'vda' has no backing file
instead of:
error: invalid argument: top '(null)' in chain for 'vda' has no backing file
Eric Blake suggested to change this message to be different from the
glibc's NULL deref protection message in printf to be able to
differentiate errors.
https://bugzilla.redhat.com/show_bug.cgi?id=1046192
Commit b8bf79a, which adds clock='variable', forgets to check
localtime basis in qemuBuildClockArgStr(). So that localtime
basis could not be used.
Reported-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 2ce63c1 added imagelabel generation when relabeling is turned
off. But we weren't filling out the sensitivity for type 'none' labels,
resulting in an invalid label:
$ virsh managedsave domain
error: unable to set security context 'system_u:object_r:svirt_image_t'
on fd 28: Invalid argument
Noticed a misuse of 'to' while testing my event regression under
polkit ACLs, and decided to review the entire conf files for
other legibility bugs.
* daemon/libvirtd.conf: Use correct grammar.
* src/qemu/qemu.conf: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1058839
Commit f9f56340 for CVE-2014-0028 almost had the right idea - we
need to check the ACL rules to filter which events to send. But
it overlooked one thing: the event dispatch queue is running in
the main loop thread, and therefore does not normally have a
current virIdentityPtr. But filter checks can be based on current
identity, so when libvirtd.conf contains access_drivers=["polkit"],
we ended up rejecting access for EVERY event due to failure to
look up the current identity, even if it should have been allowed.
Furthermore, even for events that are triggered by API calls, it
is important to remember that the point of events is that they can
be copied across multiple connections, which may have separate
identities and permissions. So even if events were dispatched
from a context where we have an identity, we must change to the
correct identity of the connection that will be receiving the
event, rather than basing a decision on the context that triggered
the event, when deciding whether to filter an event to a
particular connection.
If there were an easy way to get from virConnectPtr to the
appropriate virIdentityPtr, then object_event.c could adjust the
identity prior to checking whether to dispatch an event. But
setting up that back-reference is a bit invasive. Instead, it
is easier to delay the filtering check until lower down the
stack, at the point where we have direct access to the RPC
client object that owns an identity. As such, this patch ends
up reverting a large portion of the framework of commit f9f56340.
We also have to teach 'make check' to special-case the fact that
the event registration filtering is done at the point of dispatch,
rather than the point of registration. Note that even though we
don't actually use virConnectDomainEventRegisterCheckACL (because
the RegisterAny variant is sufficient), we still generate the
function for the purposes of documenting that the filtering
takes place.
Also note that I did not entirely delete the notion of a filter
from object_event.c; I still plan on using that for my upcoming
patch series for qemu monitor events in libvirt-qemu.so. In
other words, while this patch changes ACL filtering to live in
remote.c and therefore we have no current client of the filtering
in object_event.c, the notion of filtering in object_event.c is
still useful down the road.
* src/check-aclrules.pl: Exempt event registration from having to
pass checkACL filter down call stack.
* daemon/remote.c (remoteRelayDomainEventCheckACL)
(remoteRelayNetworkEventCheckACL): New functions.
(remoteRelay*Event*): Use new functions.
* src/conf/domain_event.h (virDomainEventStateRegister)
(virDomainEventStateRegisterID): Drop unused parameter.
* src/conf/network_event.h (virNetworkEventStateRegisterID):
Likewise.
* src/conf/domain_event.c (virDomainEventFilter): Delete unused
function.
* src/conf/network_event.c (virNetworkEventFilter): Likewise.
* src/libxl/libxl_driver.c: Adjust caller.
* src/lxc/lxc_driver.c: Likewise.
* src/network/bridge_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/test/test_driver.c: Likewise.
* src/uml/uml_driver.c: Likewise.
* src/vbox/vbox_tmpl.c: Likewise.
* src/xen/xen_driver.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1057321
pointed out that we weren't honoring the <bandwidth> element in
libvirt networks using <forward mode='bridge'/>. In fact, these
networks are just a method of giving a libvirt network name to an
existing Linux host bridge on the system, and libvirt doesn't have
enough information to know where to set such limits. We are working on
a method of supporting network bandwidths for some specific cases of
<forward mode='bridge'/>, but currently libvirt doesn't support it. So
the proper thing to do now is just log an error when someone tries to
put a <bandwidth> element in that type of network. (It's unclear if we
will be able to do proper bandwidth limiting for macvtap networks, and
most definitely we will not be able to support it for hostdev
networks).
While looking through the network XML documentation and comparing it
to the networkValidate function, I noticed that we also ignore the
presence of a mac address in the config in the same cases, rather than
failing so that the user will understand that their desired action has
not been taken.
This patch updates networkValidate() (which is called any time a
persistent network is defined, or a transient network created) to log
an error and fail if it finds either a <bandwidth> or <mac> element
and the network forward mode is anything except 'route'. 'nat', or
nothing. (Yes, neither of those elements is acceptable for any macvtap
mode, nor for a hostdev network).
NB: This does *not* cause failure to start any existing network that
contains one of those elements, so someone might have erroneously
defined such a network in the past, and that network will continue to
function unmodified. I considered it too disruptive to suddenly break
working configs on the next reboot after a libvirt upgrade.
https://bugzilla.redhat.com/show_bug.cgi?id=1045124
When loading modules, libvirt does not honor the modprobe blacklist.
Use the new virKModLoad() API in order to attempt load with blacklist check.
Use the new virKModIsBlacklisted() API to check if the failure to load
was due to the blacklist
Signed-off-by: John Ferlan <jferlan@redhat.com>
virKModConfig() - Return a buffer containing kernel module configuration
virKModLoad() - Load a specific module into the kernel configuration
virKModUnload() - Unload a specific module from the kernel configuration
virKModIsBlacklisted() - Determine whether a module is blacklisted within
the kernel configuration
commit f094aaac changed qemuPrepareHostdevPCIDevices() such that it
may modify the "backend" (vfio vs. legacy kvm) setting in the
virHostdevDef. However, qemuDomainAttachHostPciDevice() (used by
hotplug) copies the backend setting into a local *before* calling
qemuPrepareHostdevPCIDevices(), and then later makes a decision based
on that pre-change value.
The result is that, if the backend had been set to "default" (i.e. not
specified in the config) and was later updated to "VFIO" by
qemuPrepareHostdevPCIDevices(), the qemu process' MacMemLock is not
increased (as is required for VFIO device assignment).
This patch delays making the local copy of backend until after its
potential modification.
The previous patch fixed "forwardPlainNames" so that it really is
doing only what is intended, but left the default to be
"forwardPlainNames='no'". Discussion around the initial version of
that patch led to the decision that the default should instead be
"forwardPlainNames='yes'" (i.e. the original behavior before commit
f3886825). This patch makes that change to the default.
In commit f386825 we began adding the options
--domain-needed
--local=/$mydomain/
to all dnsmasq commandlines with the stated reason of preventing
forwarding of DNS queries for names that weren't fully qualified
domain names ("FQDN", i.e. a name that included some "."s and a domain
name). This was later changed to
domain-needed
local=/$mydomain/
when we moved the options from the dnsmasq commandline to a conf file.
The original patch on the list, and discussion about it, is here:
https://www.redhat.com/archives/libvir-list/2012-August/msg01594.html
When a domain name isn't specified (mydomain == ""), the addition of
"domain-needed local=//" will prevent forwarding of domain-less
requests to the virtualization host's DNS resolver, but if a domain
*is* specified, the addition of "local=/domain/" will prevent
forwarding of any requests for *qualified* names within that domain
that aren't resolvable by libvirt's dnsmasq itself.
An example of the problems this causes - let's say a network is
defined with:
<domain name='example.com'/>
<dhcp>
..
<host mac='52:54:00:11:22:33' ip='1.2.3.4' name='myguest'/>
</dhcp>
This results in "local=/example.com/" being added to the dnsmasq options.
If a guest requests "myguest" or "myguest.example.com", that will be
resolved by dnsmasq. If the guest asks for "www.example.com", dnsmasq
will not know the answer, but instead of forwarding it to the host, it
will return NOT FOUND to the guest. In most cases that isn't the
behavior an admin is looking for.
A later patch (commit 4f595ba) attempted to remedy this by adding a
"forwardPlainNames" attribute to the <dns> element. The idea was that
if forwardPlainNames='yes' (default is 'no'), we would allow
unresolved names to be forwarded. However, that patch was botched, in
that it only removed the "domain-needed" option when
forwardPlainNames='yes', and left the "local=/mydomain/".
Really we should have been just including the option "--domain-needed
--local=//" (note the lack of domain name) regardless of the
configured domain of the network, so that requests for names without a
domain would be treated as "local to dnsmasq" and not forwarded, but
all others (including those in the network's configured domain) would
be forwarded. We also shouldn't include *either* of those options if
forwardPlainNames='yes'. This patch makes those corrections.
This patch doesn't remedy the fact that default behavior was changed
by the addition of this feature. That will be handled in a subsequent
patch.
We support only one spicevmc channel name anyway and the code is
prepared to use the default one, there's only one check missing. It
is also mentioned in the documentation already and helps defining
domains with spice vdagent for people using virsh.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Coverity complains about default: label in libxl_driver.c not be able
to be reached. It's by design for the code and since it's not necessary
in the code nor does it elicit any compiler/make check warnings - just
remove it rather than adding a coverity[dead_error_begin] tag.
While I'm at it, lxc_driver.c and nodeinfo.c have the same design, so I
removed the default labels and the existing coverity tags.
The NWFilter code has as a deadlock race condition between
the virNWFilter{Define,Undefine} APIs and starting of guest
VMs due to mis-matched lock ordering.
In the virNWFilter{Define,Undefine} codepaths the lock ordering
is
1. nwfilter driver lock
2. virt driver lock
3. nwfilter update lock
4. domain object lock
In the VM guest startup paths the lock ordering is
1. virt driver lock
2. domain object lock
3. nwfilter update lock
As can be seen the domain object and nwfilter update locks are
not acquired in a consistent order.
The fix used is to push the nwfilter update lock upto the top
level resulting in a lock ordering for virNWFilter{Define,Undefine}
of
1. nwfilter driver lock
2. nwfilter update lock
3. virt driver lock
4. domain object lock
and VM start using
1. nwfilter update lock
2. virt driver lock
3. domain object lock
This has the effect of serializing VM startup once again, even if
no nwfilters are applied to the guest. There is also the possibility
of deadlock due to a call graph loop via virNWFilterInstantiate
and virNWFilterInstantiateFilterLate.
These two problems mean the lock must be turned into a read/write
lock instead of a plain mutex at the same time. The lock is used to
serialize changes to the "driver->nwfilters" hash, so the write lock
only needs to be held by the define/undefine methods. All other
methods can rely on a read lock which allows good concurrency.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are a number of pthreads impls available on Win32
these days, in particular the mingw64 project has a good
impl. Delete the native windows thread implementation and
rely on using pthreads everywhere.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The check-augeas-lockd test depends on the file
locking/qemu-lockd.conf, so must be skipped when QEMU
is disabled.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 10c9ceff6d intended to introduce new argument for the
testing purpose, but it missed the similar changing of the
device's sg_path. The problem was hidden since my laptop has
the /dev/sg0 and /dev/sg1. A later patch will modify the tests
accordingly.
Signed-off-by: Osier Yang <jyang@redhat.com>
Reported-by: Pavel Hrdina <phrdina@redhat.com>
To support passing the path of the test data to the utils, one
more argument is added to virSCSIDeviceGetSgName,
virSCSIDeviceGetDevName, and virSCSIDeviceNew, and the related
code is changed accordingly.
Later tests for the scsi utils will be based on this patch.
Signed-off-by: Osier Yang <jyang@redhat.com>
It doesn't make sense to fail if the SCSI host device is specified
as "shareable" explicitly between domains (NB, it works if and only
if the device is specified as "shareable" for *all* domains,
otherwise it fails).
To fix the problem, this patch introduces an array for virSCSIDevice
struct, which records all the names of domain which are using the
device (note that the recorded domains must specify the device as
shareable). And the change on the data struct brings on many
subsequent changes in the code.
Prior to this patch, the "shareable" tag didn't work as expected,
it actually work like "non-shareable". So this patch also added notes
in formatdomain.html to declare the fact.
* src/util/virscsi.h:
- Remove virSCSIDeviceGetUsedBy
- Change definition of virSCSIDeviceGetUsedBy and virSCSIDeviceListDel
- Add virSCSIDeviceIsAvailable
* src/util/virscsi.c:
- struct virSCSIDevice: Change "used_by" to be an array; Add
"n_used_by" as the array count
- virSCSIDeviceGetUsedBy: Removed
- virSCSIDeviceFree: frees the "used_by" array
- virSCSIDeviceSetUsedBy: Copy the domain name to avoid potential
memory corruption
- virSCSIDeviceIsAvailable: New
- virSCSIDeviceListDel: Change the logic, for device which is already
in the list, just remove the corresponding entry in "used_by". And
since it's only used in one place, we can safely removing the code
to find out the dev in the list first.
- Copyright updating
* src/libvirt_private.sys:
- virSCSIDeviceGetUsedBy: Remove
- virSCSIDeviceIsAvailable: New
* src/qemu/qemu_hostdev.c:
- qemuUpdateActiveScsiHostdevs: Check if the device existing before
adding it to the list;
- qemuPrepareHostdevSCSIDevices: Error out if the not all domains
use the device as "shareable"; Also don't try to add the device
to the activeScsiHostdevs list if it already there; And make
more sensible error w.r.t the current "shareable" value in
driver->activeScsiHostdevs.
- qemuDomainReAttachHostScsiDevices: Change the logic according
to the changes on helpers.
Signed-off-by: Osier Yang <jyang@redhat.com>
This reverts commit 2996e6be19
and some parts of 2636dc8c4d.
The former one tried to implement QoS setting on bridgeless networks.
However, as discussed upstream [1], the patch is far away from being
useful in even a single case. The whole idea of network QoS is to have
aggregated limits over several interfaces. This patch is doing
completely the opposite when merging two QoS settings (from the network
and the domain interface) into one which is then set at the domain
interface itself, not the network.
The latter one is the test for the previous one. Now none of them makes
sense.
1: https://www.redhat.com/archives/libvir-list/2014-January/msg01441.html
Conflicts:
tests/virnetdevbandwidthtest.c: New test has been introduced since
then.
There are some units within libvirt that utilize virCommand API to run
some commands and deserve own unit testing. These units are, however,
not desired to be rewritten to dig virCommand API usage out. As a great
example virNetDevBandwidth could be used. The problem with the bandwidth
unit is: it uses virCommand API heavily. Therefore we need a mechanism
to not really run a command, but rather see its string representation
after which we can decide if the unit construct the correct sequence of
commands or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add support for specifying various types when doing snapshots. This will
later allow to do snapshots on network backed volumes. Disks of type
'volume' are not supported by snapshots (yet).
Also amend the test suite to check parsing of the various new disk
types that can now be specified.
Commit df36af58 broke parsing of http response from xend. The prior
use of atoi() would happily parse e.g. a string containing "200 OK\r\n",
whereas virStrToLong_i() will fail when called with a NULL end_ptr.
Change the calls to virStrToLong_i() to provide a non-NULL end_ptr.
https://bugzilla.redhat.com/show_bug.cgi?id=1049391
When all source CPU XMLs contain just a single CPU model (with a
possibly varying set of additional feature elements),
virConnectBaselineCPU will try to use this CPU model in the computed
guest CPU. Thus, when used on just a single CPU (useful with
VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES), the result will not use a
different CPU model.
If the computed CPU uses the source model, set fallback mode to 'forbid'
to make sure the guest CPU will always be as close as possible to the
source CPUs.
https://bugzilla.redhat.com/show_bug.cgi?id=1049391
VIR_CONNECT_BASELINE_CPU_EXPAND_FEATURES flag for virConnectBaselineCPU
did not work if the resulting guest CPU would disable some features
present in its base model. This patch makes sure we won't try to add
such features twice.
Implement virProcess{Get,Set}Affinity() using cpuset_getaffinity()
and cpuset_setaffinity() calls. Quick search showed that they are
only available on FreeBSD, so placed it inside existing #ifdef
blocks for FreeBSD instead of adding configure checks.
Creating a qemu VM with /dev/hwrng as backend RNG device throws the
following error - "Could not open '/dev/hwrng': Permission denied"
This patch fixes the issue
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1055484
Currently, libvirt's XML schema of network allows QoS to be defined for
every network even though it has no bridge. For instance:
<network>
<name>vdsm-no-bridge</name>
<forward mode='passthrough'>
<interface dev='em1.10'/>
</forward>
<bandwidth>
<inbound average='1000' peak='5000' burst='1024'/>
<outbound average='1000' burst='1024'/>
</bandwidth>
</network>
The bandwidth limitations can be, however, applied even on such
networks. In fact, they are going to be applied on the interface that
will be connected to the network on a domain startup. This approach,
however, has one limitation. With bridged networks, there are two points
where QoS can be set: bridge and domain interface. The lower limit of
the two is enforced then. For instance, if the interface has 10Mbps
average, but the network only 1Mbps, there's no way for interface to
transmit packets faster than the 1Mbps limit. With two points this is
enforced by kernel. With only one point, we must combine both QoS
settings into one which is set afterwards. Look at
virNetDevBandwidthMinimal() and you'll understand immediately what I
mean.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
