The patch described above introduced two problems caught by the compiler
and thus breaking the build.
One of the problems was comparison of unsigned with < 0 and the second
one jumped a variable init.
Before:
virsh # dominfo chx3
State: shut off
Max memory: 92160 KiB
Used memory: 92160 KiB
After:
virsh # dominfo container1
State: shut off
Max memory: 92160 KiB
Used memory: 0 KiB
Similar to qemu cases.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Added <capabilities> in the <features> section of LXC domains
configuration. This section can contain elements named after the
capabilities like:
<mknod state="on"/>, keep CAP_MKNOD capability
<sys_chroot state="off"/> drop CAP_SYS_CHROOT capability
Users can restrict or give more capabilities than the default using
this mechanism.
kernel commit 7dc5dbc879bd0779924b5132a48b731a0bc04a1e
forbid us doing a fresh mount for sysfs
when enable userns but disable netns.
This patch will create a bind mount in this senario.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
In the fbd91d49 commit, new scsihostdata dir is added to EXTRA_DIST in
the tests/Makefile.am. However, the directory itself is not created
anywhere, nor in the commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Firstly, there's no sigaction() nor struct sigaction on mingw. We have
to use the one implemented by gnulib (and hence link with gnulib).
Then, for some reason one header file from windows defines ERROR
symbol. Yes it does. Sigh.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Under ./configure --without-numactl but with numactl-devel installed,
the build fails with:
../../src/util/virnuma.c: In function 'virNumaNodeIsAvailable':
../../src/util/virnuma.c:407:5: error: implicit declaration of function 'numa_bitmask_isbitset' [-Werror=implicit-function-declaration]
return numa_bitmask_isbitset(numa_nodes_ptr, node);
^
and other failures, all because the configure results for particular
functions were used without regard to whether libnuma was even being
linked in.
* src/util/virnuma.c (virNumaGetPages): Fix message typo.
(virNumaNodeIsAvailable): Correct build when not using numactl.
Signed-off-by: Eric Blake <eblake@redhat.com>
virStorageBackendLogicalCreateVol contains a piece like:
if (vol->target.path != NULL) {
/* A target path passed to CreateVol has no meaning */
VIR_FREE(vol->target.path);
}
The 'if' is useless here, but 'syntax-check' doesn't catch that
because of the comment, so drop the 'if'.
Commit ef48a1b introduced virFindSCSIHostByPCI for Linux and
a stub for other platforms that returns -1 while the function
should return 'char *', so use 'return NULL' instead.
Commit fbd91d4 introduced virReadSCSIUniqueId with the third
argument 'int *result', however the stub for non-Linux patform
uses 'unsigned int *result', so change it to 'int *result'.
Pushed under the build breaker rule.
If a parentaddr was provided in the XML, have getAdapterName lookup
the stable address. This allows virStorageBackendSCSICheckPool() and
virStorageBackendSCSIRefreshPool() to automagically find the scsi_host
by its PCI address and unique_id
Introduce a new function to parse the provided scsi_host parent address
and unique_id value in order to find the /sys/class/scsi_host directory
which will allow a stable SCSI host address
Add a test to scsihosttest to lookup the host# name by using the PCI address
and unique_id value
Add an optional unique_id parameter to nodedev. Allows for easier lookup
and display of the unique_id value in order to document for use with
scsi_host code.
Introduce a new function to read the current scsi_host entry and return
the value found in the 'unique_id' file.
Add a 'scsihosttest' test (similar to the fchosttest, but incorporating some
of the concepts of the mocked pci test library) in order to read the
unique_id file like would be found in the /sys/class/scsi_host tree.
Between reboots and kernel reloads, the SCSI host number used for SCSI
storage pools may change requiring modification to the storage pool XML
in order to use a specific SCSI host adapter.
This patch introduces the "parentaddr" element and "unique_id" attribute
for the SCSI host adapter in order to uniquely identify the adapter
between reboots and kernel reloads. For now the goal is to only parse
and format the XML. Both will be required to be provided in order to
uniquely identify the desired SCSI host.
The new XML is expected to be as follows:
<adapter type='scsi_host'>
<parentaddr unique_id='3'>
<address domain='0x0000' bus='0x00' slot='0x1f' func='0x2'/>
</parentaddr>
</adapter>
where "parentaddr" is the parent device of the SCSI host using the PCI
address on which the device resides and the value from the unique_id file
for the device. Both the PCI address and unique_id values will be used
to traverse the /sys/class/scsi_host/ directories looking at each link
to match the PCI address reformatted to the directory link format where
"domain🚌slot:function" is found. Then for each matching directory
the unique_id file for the scsi_host will be used to match the unique_id
value in the xml.
For a PCI address listed above, this will be formatted to "0000:00:1f.2"
and the links in /sys/class/scsi_host will be used to find the host#
to be used for the 'scsi_host' device. Each entry is a link to the
/sys/bus/pci/devices directories, e.g.:
% ls -al /sys/class/scsi_host/host2
lrwxrwxrwx. 1 root root 0 Jun 1 00:22 /sys/class/scsi_host/host2 -> ../../devices/pci0000:00/0000:00:1f.2/ata3/host2/scsi_host/host2
% cat /sys/class/scsi_host/host2/unique_id
3
The "parentaddr" and "name" attributes are mutually exclusive to identify
the SCSI host number. Use of the "parentaddr" element will be the preferred
mechanism.
This patch only supports to parse and format the XMLs. Later patches will
add code to find out the scsi host number.
Rather than assume that NOT FC_HOST is SCSI_HOST, let's call them out
specifically. Makes it easier to find SCSI_HOST code/structs and ensures
something isn't missed in the future
Gluster volumes don't start with a leading slash. Our schema for netfs
gluster pools enforces it though. Luckily mount.glusterfs skips it.
Allow a slashless volume name for glusterfs netfs mounts in the schema.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1101999
We do so in the vast majority of places, so there's no problem of adding
the attribute to enforce it by the complier and fix a few leftover
places.
This was originally pointed out by Coverity as a recent change triggered
it's warning that our code checked the vast majority of returns from
virStrToLong_ui.
Use the virTypedParamsFree unconditionally as it handles NULL well and
has the benefit of freeing a typed parameter array even if it wasn't yet
assigned, but only allocated.
Convert the target snapshot state selector to a switch statement
enumerating all possible values. This points out a few mistakes in the
original selector.
The logic of the code is preserved until later patches.
Try to reconnect to the running domains after libvirtd restart. To
achieve that, do:
* Save domain state
- Modify virBhyveProcessStart() to save domain state to the state
dir
- Modify virBhyveProcessStop() to cleanup the pidfile and the state
* Detect if the state information loaded from the driver's state
dir matches the actual state. Consider domain active if:
- PID it points to exist
- Process title of this PID matches the expected one with the
domain name
Otherwise, mark the domain as shut off.
Note: earlier development bhyve versions before FreeBSD 10.0-RELEASE
didn't set proctitle we expect, so the current code will not detect
it. I don't plan adding support for this unless somebody requests
this.
libvirt supports pci domain already, so update the documentation.
Otherwise users who lookup the documentation for how to use hostdev may
miss the domain and encounter error when pass-through a pci device in a
domain other than 0.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
As with the local SCSI passthrough devicesm qemu can't support snapshots
on those as the block ops are handled by the device. This is also true
for iSCSI backing of the disk. Remove the check for the local block
device and just forbid snapshot when the disk is of type 'lun'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1073368
Disk type 'lun' enables SCSI command passthrough for a disk. We stated
that it works only with "block" disks. Qemu supports it also when using
the iSCSI protocol.
There's this question on the list that is asked over and over again.
How do I get {cpu, memory, ...} usage in percentage? Or its modified
version: How do I plot nice graphs like virt-manager does?
It would be nice if we have an example to inspire people. And that's
what domtop should do. Yes, it could be written in different ways, but
I've chosen this one as I think it show explicitly what users need to
implement in order to imitate virt-manager's graphing.
Note: The usage is displayed from host perspective. That is, how much
host CPUs the domain is using. But it should be fairly simple to
switch do just guest CPU usage if needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's no need to use it since we have this shiny functions
that even checks for conversion and overflow errors.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
LXC network devices can now be assigned a custom NIC device name on the
container side. For example, this is configured with:
<interface type='network'>
<source network='default'/>
<guest dev="eth1"/>
</interface>
In this example the network card will appear as eth1 in the guest.
Decisions whether qemu driver and libvirt-daemon-{qemu,kvm} packages
should be built on various OS/arch combinations were scattered around
the spec file. Let's make it easier to see where qemu driver is going to
be built.
https://bugzilla.redhat.com/show_bug.cgi?id=1091866
Add a new boolean 'sparse'. This will be used by the logical backend
storage driver to determine whether the target volume is sparse or not
(also known by a snapshot or thin logical volume). Although setting sparse
to true at creation could be seen as duplicitous to setting during
virStorageBackendLogicalMakeVol() in case there are ever other code paths
between Create and FindLVs that need to know about the volume be sparse.
Use the 'sparse' in a new virStorageBackendLogicalVolWipe() to decide whether
to attempt to wipe the logical volume or not. For now, I have found no
means to wipe the volume without writing to it. Writing to the sparse
volume causes it to be filled. A sparse logical volume is not completely
writeable as there exists metadata which if overwritten will cause the
sparse lv to go INACTIVE which means pool-refresh will not find it.
Access to whatever lvm uses to manage data blocks is not provided by
any API I could find.
Commit 93e82727 introduced numatune_conf.h file that contains
typedefs already defined in domain_conf.h, such as:
- virDomainNumatune
- virDomainNumatunePtr
- virDomainDef
- virDomainDefPtr
As numatune_conf.h is included by domain_conf.h, clang
complains about redefinition of typedef and the build fails.
In order to fix it, drop typedefs already defined by numatume_conf.h
from domain_conf.h.
Commit id '0e2d7305' modified the code to allow a negative value to be
supplied for the bandwidth argument of the various block virsh commands
and the migrate-setspeed; however, it failed to update the man page to
describe the "feature" whereby a very large value could be interpreted
by the hypervisor to mean maximum value allowed. Although initially
designed to handle a -1 value, the reality is just about any negative
value could be provided and essentially perform the same feature.
https://bugzilla.redhat.com/show_bug.cgi?id=1087104
Commit id 'c6212539' explicitly allowed a negative value to be used for
offset and length as a shorthand for the largest value after commit id
'f18c02ec' modified virStrToLong_ui() to essentially disallow a negative
value.
However, allowing a negative value for offset ONLY worked if the negative
value was -1 since the eventual lseek() does allow a -1 to mean the end
of the file. Providing other negative values resulted in errors such as:
$ virsh vol-download --pool default qcow3-vol2 /home/vm-images/raw \
--offset -2 --length -1000
error: cannot download from volume qcow3-vol2
error: Unable to seek /home/vm-images/qcow3-vol2 to 18446744073709551614: Invalid argument
$
Thus, it seems unreasonable to expect or allow a negative value for offset
since the only benefit is to lseek() to the end of the file and then only
take advantage of how the OS would handle such a seek. For the purposes of
upload or download of volume data, that seems to be a no-op. Therefore,
disallow a negative value for offset.
Additionally, modify the man page for vol-upload and vol-download to provide
more details regarding the valid values for both offset and length.
Coverity complains about the return value of ioctl not being checked.
Even though we carry on when this fails (just like qemu-img does),
we can log an error.
For non-local storage drivers we can't expect to use the "scrub" tool to
wipe the volume. Split the code into a separate backend function so that
we can add protocol specific code later.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1118710
The next patch will move the storage volume wiping code into the
individual backends. This patch splits out the common code to wipe a
local volume into a separate backend helper so that the next patch is
simpler.
The previous commit 09d4d26 put the interleave at the wrong point;
it didn't allow interleaving with <memory>.
* docs/schema/domaincommon.rng (numatune): Fix interleave location.
* tests/qemuxml2argvdata/qemuxml2argv-numatune-memnode.xml: Adjust test.
Signed-off-by: Eric Blake <eblake@redhat.com>
