Commit Graph

2435 Commits

Author SHA1 Message Date
Peter Krempa
41345f6201 virsh: Allow extracting 'return' section of QMP command in 'qemu-monitor-command'
Simplify gathering the actual return value from a passed-through QMP
command when using 'qemu-monitor-command' by adding '--return-value'
switch which just extracts the 'return' section and alternatively
reports an error if the section is not present.

This simplifies gathering of some test data where the full reply would
need to be trimmed just for the actual return value.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2020-02-10 17:26:26 +01:00
Daniel P. Berrangé
2621d48f00 gnulib: delete all gnulib integration
This deletes all trace of gnulib from libvirt. We still
have the keycodemapdb submodule to deal with. The simple
solution taken was to update it when running autogen.sh.

Previously gnulib could auto-trigger refresh when running
'make' too. We could figure out a solution for this, but
with the pending meson rewrite it isn't worth worrying
about, given how infrequently keycodemapdb changes.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-02-07 15:03:54 +00:00
Daniel P. Berrangé
dc0771cfa2 tools: rewrite interactive job monitoring logic
For long running jobs (save, managed save, dump & live migrate)
virsh runs a background thread for executing the job and then
has the main thread catch Ctrl-C for graceful shutdown, as well
as displaying progress info.

The monitoring code is written using poll, with a pipe used
to get the completion status from the thread. Using a pipe
and poll is problematic for Windows portability. This rewrites
the code to use a GMainLoop instance for monitoring stdin and
doing progress updates. The use of a pipe is entirely eliminated,
instead there is just a shared variable between both threads
containing the job completion status.

No mutex locking is used because the background thread writes
to the variable only when the main loop is still running,
while the foreground thread only reads it after the main loop
has exited.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-02-07 15:03:53 +00:00
zhenwei pi
26badd13e8 qemu: support Panic Crashloaded event handling
Pvpanic device supports bit 1 as crashloaded event, it means that
guest actually panicked and run kexec to handle error by guest side.

Handle crashloaded as a lifecyle event in libvirt.

Test case:
Guest side:
before testing, we need make sure kdump is enabled,
1, build new pvpanic driver (with commit from upstream
   e0b9a42735f2672ca2764cfbea6e55a81098d5ba
   191941692a3d1b6a9614502b279be062926b70f5)
2, insmod new kmod
3, enable crash_kexec_post_notifiers,
  # echo 1 > /sys/module/kernel/parameters/crash_kexec_post_notifiers
4, trigger kernel panic
  # echo 1 > /proc/sys/kernel/sysrq
  # echo c > /proc/sysrq-trigger

Host side:
1, build new qemu with pvpanic patches (with commit from upstream
   600d7b47e8f5085919fd1d1157f25950ea8dbc11
   7dc58deea79a343ac3adc5cadb97215086054c86)
2, build libvirt with this patch
3, handle lifecycle event and trigger guest side panic
  # virsh event stretch --event lifecycle
  event 'lifecycle' for domain stretch: Crashed Crashloaded
  events received: 1

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
2020-02-07 14:05:25 +00:00
Daniel P. Berrangé
c7aac54bc1 tools: conditionalize use of O_SYNC flag
The O_SYNC flag is not defined on Windows platforms.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-02-04 14:00:45 +00:00
Daniel P. Berrangé
cc46e137eb src: convert code to use virPipe APIs
This addreses portability to Windows and standardizes
error reporting. This fixes a number of places which
failed to set O_CLOEXEC or failed to report errors.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-02-04 14:00:44 +00:00
Ján Tomko
0a125c7144 virBufferTrim: do not accept len
Always trim the full specified suffix.

All of the callers outside of tests were passing either
strlen or the actual length of the string.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2020-02-03 19:44:38 +01:00
Ján Tomko
4838e8b3fc Use virBufferTrimLen when applicable
Replace all the cases that only supply the length
and do not care about matching a suffix, as well
as that one test case that does.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2020-02-03 19:44:38 +01:00
Jim Fehlig
72ed254b38 build: Drop execute permissions on virsh bash completion command
rpmlint complains about "script-without-shebang" due to the execute
permissions on /usr/share/bash-completion/completions/vsh. Use
INSTALL_DATA instead of INSTALL_SCRIPT to avoid the unnecessary
execute permissions.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-01-31 08:49:04 -07:00
Ján Tomko
49882b3337 Add a space before ending a comment
Also add a space after the start in some of the cases.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2020-01-30 12:32:03 +01:00
Daniel P. Berrangé
ff627b4726 rpc: conditionalize signal handling
The Windows platform does not have the signal handling
support we need, so it must be disabled in several parts
of the codebase.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:40 +00:00
Daniel P. Berrangé
6485c2c0ae tools: replace wcwidth() with g_unichar_* APIs
The combination of g_unichar_iszerowidth and
g_unichar_iswide is sufficient to replicate the logic
of wcwidth() for libvirt.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:39 +00:00
Daniel P. Berrangé
f80c009cb3 build: generate configmake.h in root directory
Currently we rely on gnulib creating configmake.h, but we
can easily create it ourselves instead.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:39 +00:00
Daniel P. Berrangé
db72866310 util: add API for reading password from the console
This imports a simpler version of GNULIB's getpass() function
impl for Windows. Note that GNULIB's impl was buggy as it
returned a static string on UNIX, and a heap allocated string
on Windows. This new impl always heap allocates.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-29 14:51:39 +00:00
Peter Krempa
70c7453895 tools: virsh: Add --interactive flag for secret-set-value command
Simplify human usage of secret-set-value by adding --interactive which
will read the value of the secret from the terminal.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-28 18:09:57 +01:00
Peter Krempa
ff5f75f561 virsh: secret: Add --plain switch for secret-set-value
Allow using the contents of --file without base64 decoding.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-28 18:09:57 +01:00
Peter Krempa
3c5c90ca19 virsh: secret: Print warning that passing secret on command-line is insecure
Print a warning if users pass in secrets as command line arguments and
mention it in the man page.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-28 18:09:57 +01:00
Peter Krempa
dbbc74e4ce virsh: secret: Add --file 'filename' support for secret-set-value
The necessity to specify the secret value as command argument is
insecure. Allow reading the secret from a file.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-28 18:09:57 +01:00
Peter Krempa
5611795b2b virsh: secret: Add --plain flag for secret-get-value
Users might want to get the raw value instead of dealing with base64
encoding. This might be useful for redirection to file and also for
simple human-readable secrets.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-28 18:09:57 +01:00
Peter Krempa
1a552eccf1 virsh: secret: Refactor cleanup in cmdSecretGetValue
Automatically clean the secret object and get rid of the cleanup label
and 'ret' valiable.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-28 18:09:57 +01:00
Peter Krempa
66770bc6f5 virsh: secret: Refactor cleanup in cmdSecretSetValue
Automatically clean the secret object and get rid of the cleanup label
and 'ret' valiable.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-28 18:09:57 +01:00
Peter Krempa
7e8ed7d782 virsh: Work around virSecretFree quirks
Similarly to other libvirt object freeing APIs the function resets the
libvirt error when called and doesn't take NULL gracefully. Install the
workaround and g_autoptr handlers similarly to the 'virshDomain' type.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-28 18:09:57 +01:00
Daniel P. Berrangé
3caa28dc50 src: replace gmtime_r/localtime_r/strftime with GDateTime
gmtime_r/localtime_r are mostly used in combination with
strftime to format timestamps in libvirt. This can all
be replaced with GDateTime resulting in simpler code
that is also more portable.

There is some boundary condition problem in parsing POSIX
timezone offsets in GLib which tickles our test suite.
The test suite is hacked to avoid the problem. The upsteam
GLib bug report is

  https://gitlab.gnome.org/GNOME/glib/issues/1999

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-17 10:02:01 +00:00
Daniel P. Berrangé
7c828af858 src: conditionally exclude cfmakeraw/termios.h on WIN32
The GNULIB termios module ensures termios.h exists (but
is none the less empty) when building for Windows. We
already exclude usage of the functions that would exist
in a real termios.h, so having an empty termios.h is
not especially useful.

It is simpler to just put all use of termios.h related
functions behind a "#ifndef WIN32" conditional.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-17 10:02:01 +00:00
Daniel P. Berrangé
fa434739a0 src: replace verify(expr) with G_STATIC_ASSERT(expr)
G_STATIC_ASSERT() is a drop-in functional equivalent of
the GNULIB verify() macro.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-17 10:02:01 +00:00
Daniel P. Berrangé
117353f9e5 src: replace use of INT_BUFSIZE_BOUND macros
Introduce a vastly simpler VIR_INT64_STR_BUFLEN constant
which is large enough for all cases where we currently
use INT_BUFSIZE_BOUND. This eliminates most use of the
gnulib intprops.h header.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-17 09:58:43 +00:00
Julio Faracco
0f814c0fed virsh: Expose virDomainGetHostnameFlags
Our virsh already has 'domhostname' command. Add '--source'
argument to it so that users can chose between 'lease' and
'agent' sources. Also, implement completer for the argument.

Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-01-16 09:02:35 +01:00
Jiri Denemark
143b71a8ec virsh migrate: Require --tls for --tls-destination
--tls-destination would be just ignored unless --tls is not specified,
which is correct, but let's provide a bit of a guidance is a user
forgets to add --tls.

This is just a virsh-only check targeted to end users as we don't
currently have such checks at the API level for migration parameters
that depend on flags.

https://bugzilla.redhat.com/show_bug.cgi?id=1784345

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
2020-01-10 09:12:57 +01:00
Michal Privoznik
44791eaf8b cmdDomIfAddr: Move domain lookup down a few lines
The 'domifaddr' command accepts several arguments. Let's validate
them first and look up domain to work with only after to save
some RPC cycles should validation fail.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-07 16:12:55 +01:00
Michal Privoznik
13fa7b587f virsh: Fix virshDomainInterfaceSourceCompleter
Introduced in v5.10.0-449-gcf44ec5577 it used
virshCommaStringListComplete() to generate list of options. But
this is not correct because the '--source' argument of the
'domifaddr' doesn't accept a string list (for instance
"arp,agent,lease") rather than a single string. Therefore, the
completer must return these strings separately and thus must
refrain from using virshCommaStringListComplete().

At the same time, now that we have strings we need declared as
an enum we can use TypeToString() instead of copying strings.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-07 16:12:55 +01:00
Michal Privoznik
79b9328d76 virsh: Use VIR_ENUM_* instead of open coding string -> enum conversion
There are more occurrences, but I'm converting --source argument
of domifaddr command only, because I will need it in next commit.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-07 16:12:55 +01:00
Wang Huaqiang
65a63d8864 Introduce command 'virsh domstats --memory' for reporting memory BW
Introduce an option '--memory' for showing memory related
information. The memory bandwidth infomatio is listed as:

Domain: 'libvirt-vm'
 memory.bandwidth.monitor.count=4
 memory.bandwidth.monitor.0.name=vcpus_0-4
 memory.bandwidth.monitor.0.vcpus=0-4
 memory.bandwidth.monitor.0.node.count=2
 memory.bandwidth.monitor.0.node.0.id=0
 memory.bandwidth.monitor.0.node.0.bytes.total=10208067584
 memory.bandwidth.monitor.0.node.0.bytes.local=4807114752
 memory.bandwidth.monitor.0.node.1.id=1
 memory.bandwidth.monitor.0.node.1.bytes.total=8693735424
 memory.bandwidth.monitor.0.node.1.bytes.local=5850161152
 memory.bandwidth.monitor.1.name=vcpus_7
 memory.bandwidth.monitor.1.vcpus=7
 memory.bandwidth.monitor.1.node.count=2
 memory.bandwidth.monitor.1.node.0.id=0
 memory.bandwidth.monitor.1.node.0.bytes.total=853811200
 memory.bandwidth.monitor.1.node.0.bytes.local=290701312
 memory.bandwidth.monitor.1.node.1.id=1
 memory.bandwidth.monitor.1.node.1.bytes.total=406044672
 memory.bandwidth.monitor.1.node.1.bytes.local=229425152

Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
2020-01-06 14:04:10 +00:00
Daniel P. Berrangé
0b4598b183 src: replace getcwd() with g_get_current_dir()
commandhelper.c is not converted since this is a standalone
program only run on UNIX, so can rely on getcwd().

Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-03 15:42:13 +00:00
Daniel P. Berrangé
f5e9bdb87f src: replace clock_gettime()/gettimeofday() with g_get_real_time()
g_get_real_time() returns the time since epoch in microseconds.
It uses gettimeofday() internally while libvirt used clock_gettime
because it is declared async signal safe. In practice gettimeofday
is also async signal safe *provided* the timezone parameter is
NULL. This is indeed the case in g_get_real_time().

Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-03 15:42:13 +00:00
Daniel P. Berrangé
f7df985684 src: switch from fnmatch to g_pattern_match_simple
The g_pattern_match function_simple is an acceptably close
approximation of fnmatch for libvirt's needs.

In contrast to fnmatch(), the '/' character can be matched
by the wildcards, there are no '[...]' character ranges and
'*' and '?' can not be escaped to include them literally in
a pattern.

Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-03 15:42:13 +00:00
Daniel P. Berrangé
2c33532423 src: switch to use g_setenv/g_unsetenv
Eliminate direct use of normal setenv/unsetenv calls in
favour of GLib's wrapper. This eliminates two gnulib
modules

Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-03 15:42:12 +00:00
Julio Faracco
cf44ec5577 virsh: Add a completer for domifaddr --source parameter.
The command `domifaddr` can use three different sources to grab IP
address of a Virtual Machine: lease, agent and arp. This parameter does
not have a completer function to return source options.

Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-01-03 13:35:45 +01:00
Cole Robinson
f854e051b9 Remove phyp driver
The phyp driver was added in 2009 and does not appear to have had any
real feature change since 2011. There's virtually no evidence online
of users actually using it. IMO it's time to kill it.

This was discussed a bit in April 2016:
https://www.redhat.com/archives/libvir-list/2016-April/msg01060.html

Final discussion is here:
https://www.redhat.com/archives/libvir-list/2019-December/msg01162.html

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-12-20 12:25:42 -05:00
Fabiano Fidêncio
bee366a9ca tools: Don't check the output of virGetUserCacheDirectory()
virGetUserCacheDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.

Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-12-20 09:38:43 +01:00
Fabiano Fidêncio
dd478cc538 tools: Use g_autofree in cmdCd()
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-12-20 09:38:43 +01:00
John Ferlan
ce7af78e39 virsh: Adjust logic checks in virshUpdateDiskXML
Make it clearer that what we're trying to do is find @source and
@target_node so that the unattentive or code analysis utility
doesn't believe 'source' and 'target' could be found in the same
node element.

Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-12-18 17:21:51 -05:00
Ján Tomko
5657608b5e build: warn on a large frame by default
My commit e73889b631
split the -Wframe-larger-than warning setting into
two different variables - STRICT_FRAME_LIMIT_CFLAGS
for the library code and RELAXED_FRAME_LIMIT_CFLAGS
which was needed for tests.

Use the strict limit by default and specify the warning
flag twice for the parts that require a larger stack
frame, relying on the fact that the compiler will pick
up the latter value.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-12-17 14:39:56 +01:00
Michal Privoznik
67010e8749 virsh: Introduce nvme disk to domblklist
This is slightly more complicated because NVMe disk source is not
a simple attribute to <source/> element. The format in which the
PCI address and namespace ID are printed is the same as QEMU
accepts them:

  nvme://XXXX:XX:XX.X/X

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-12-17 10:04:44 +01:00
Christian Ehrhardt
8ea9e032dd tools: do not loop in libvirt-guests test_connect
These days libvirt is pretty reliable and even remote connections
(not the default for libvirt-guests anyway) either work or fail but are
uncommon to be flaky.

On the other hand users might have disabled the service and while we are
After=libvirtd for ordering we are not Requiring it. Adding that or any
harder dependency might break our ordering. But if people have disabled
libvirt they will do a full retry loop until timeout.

Lets drop the loop to be much faster if a remote is not reachable.

Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1854653

This reverts

  commit 4e7fc8305a
  Author: Michal Prívozník <mprivozn@redhat.com>
  Date:   Fri Feb 21 12:46:08 2014 +0100

    libvirt-guests: Wait for libvirtd to initialize

The race described in that commit no longer exists using systemd as
we now have socket activation. If not using systemd, then it is also
safe if using the libvirtd --daemon flag, since the parent process
won't return to the caller until the child is accepting connections.

Reported-by: Doug Smythies <dsmythies@telus.net>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
2019-12-16 10:10:49 +00:00
Ján Tomko
7318bff551 Remove VIR_STRNDUP usage with checked pointers
Remove the usage where sanity of the length argument is verified
by other conditions not matching the previous patches.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-12-12 14:24:34 +01:00
Ján Tomko
997340588b vsh: remove vshErrorOOM
We abort on allocation errors now so there is no need to
have a function for it.

Replace the only use by return -1, chosen by fair dice roll.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-12-12 14:24:34 +01:00
Daniel P. Berrangé
e8dfddfa21 docs: remove build recipes related to pod2man usage
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-11 14:28:41 +00:00
Daniel P. Berrangé
ab06dd9db3 docs: convert virsh man page from pod to rst
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-11 14:28:41 +00:00
Daniel P. Berrangé
10251eae0e docs: convert virt-admin man page from pod to rst
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-11 14:28:41 +00:00
Daniel P. Berrangé
9aca11ac6a docs: convert virt-login-shell man page from pod to rst
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-11 14:28:41 +00:00