There are some stateless drivers which implement subdrivers
(typically vbox and its own network and storage subdrivers). However,
as of ba5f3c7c8e the vbox driver lives in the daemon, not the
client library. This means, in order for vbox (or any stateless domain
driver) to use its subdrivers, it must register before the general
drivers. Later, when the virConnectOpen function goes through the
subdrivers, stateless drivers are searched first. If the connection
request is aiming at stateless driver, it will be opened. Otherwise
the generic subdriver is opened.
The other change done in this commit is moving interface module load a
bit earlier to match the ordering in case libvirt is built without
driver modules.
Reported-by: Taowei Luo <uaedante@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Libvirt is really chatty when the DEBUG log level is enabled. When a
host uses journald we'd enable debug logging to journald when only
specifying the debug log level. As journald may employ rate throttling
this would lock up the daemon until it's able to flush all debug
messages.
This patch changes the default log level to VIR_LOG_INFO when using the
default (unconfigured) log output to journald.
To still allow debug logging to journald the user now has to explicitly
specify journald as a log output with priority 1 in the "log_outputs"
configuration option. This patch also changes the config file template
to be explicit about this change and notify the user about the possible
consequence of debug logging into journald.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1121955
Fixes leak introduced by e562e82f
==4937== 64 bytes in 1 blocks are definitely lost in loss record 270 of 405
==4937== at 0x4A06BE0: realloc (vg_replace_malloc.c:662)
==4937== by 0x6FA41C4: __vasprintf_chk (vasprintf_chk.c:90)
==4937== by 0x50C8D29: virVasprintfInternal (stdio2.h:199)
==4937== by 0x50C8E3A: virAsprintfInternal (virstring.c:362)
==4937== by 0x11D01A: main (libvirtd.c:1170)
Signed-off-by: Ján Tomko <jtomko@redhat.com>
A earlier commit changed the global log buffer so that it only
records messages that are explicitly requested via the log
filters setting. This removes the performance burden, and
improves the signal/noise ratio for messages in the global
buffer. At the same time though, it is somewhat pointless, since
all the recorded log messages are already going to be sent to an
explicit log output like syslog, stderr or the journal. The
global log buffer is thus just duplicating this data on stderr
upon crash.
The log_buffer_size config parameter is left in the augeas
lens to prevent breakage for users on upgrade. It is however
completely ignored hereafter.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=992980
This config tunable allows users to determine the maximum number of
accepted but yet not authenticated users.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Our current pidfile acquire APis (virPidFileAcquire) simply return -1 upon
failure to acquire a lock. This patch adds a parameter 'bool waitForLock'
which instructs the APIs if we want to make it block and wait for the lock
or not.
When libvirtd is run from a build directory without being installed, it
should not depend on files from a libvirt package installed in the
system. Not only because there may not be any libvirt installed at all.
We already do a good job for plugins but cpu_map.xml was still loaded
from the system.
The Makefile.am change is necessary to make this all work from VPATH
builds since libvirtd has no idea where to find libvirt sources. It only
knows the path from which it was started, i.e, a builddir.
https://bugzilla.redhat.com/show_bug.cgi?id=1074327
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The future QEMU capabilities cache needs to be able to invalidate
itself if the libvirtd binary or any loadable modules are changed
on disk. Record the 'ctime' value for these binaries and provide
helper APIs to query it. This approach assumes that if libvirt.so
is changed, then libvirtd will also change, which should usually
be the case with libtool's wrapper scripts that cause libvirtd to
get re-linked
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Right now, a caller waiting for a child process either requires
the child to have status 0, or must use WIFEXITED() and friends
itself. But in many cases, we want the middle ground of treating
fatal signals as an error, and directly accessing the normal exit
value without having to use WEXITSTATUS(), in order to easily
detect an expected non-zero exit status. This adds the middle
ground to the low-level virProcessWait; the next patch will add
it to virCommand.
* src/util/virprocess.h (virProcessWait): Alter signature.
* src/util/virprocess.c (virProcessWait): Add parameter.
(virProcessRunInMountNamespace): Adjust caller.
* src/util/vircommand.c (virCommandWait): Likewise.
* src/util/virfile.c (virFileAccessibleAs): Likewise.
* src/lxc/lxc_container.c (lxcContainerHasReboot)
(lxcContainerAvailable): Likewise.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* tools/virt-login-shell.c (main): Likewise.
* tools/virsh-domain.c (cmdLxcEnterNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* tests/commandtest.c (test23): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
At this point it has a limited functionality and is highly
experimental. Supported domain operations are:
* define
* start
* destroy
* dumpxml
* dominfo
It's only possible to have only one disk device and only one
network, which should be of type bridge.
https://bugzilla.redhat.com/show_bug.cgi?id=1033061
Currently, initialization of drivers is done in a separate thread. This
is done for several reasons: a driver that is initialized may require
running event loop, it may take ages to initialize driver (e.g. due to
autostarting domains). While the thread is spawn and run, the main()
continues its execution. However, if something goes bad, or the event
loop is just exited (e.g. due to a --timeout or SIGINT) we try to
cleanup all the drivers. So we have two threads running Initialize() and
Cleanup() concurrently. This may result in accessing stale pointers -
e.g. netcf driver will free() itself in stateCleanup callback, while the
init thread may come, open a dummy connection in order to autostart some
domains and voilà: do_open() iterates over interface drivers and
accesses stale netcf driver.
The fix consists in not running stateCleanup if the init thread is still
running.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Unconditional use of getenv is not secure in setuid env.
While not all libvirt code runs in a setuid env (since
much of it only exists inside libvirtd) this is not always
clear to developers. So make all the code paranoid, even
if it only ever runs inside libvirtd.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A previous patch used existing #define for the various files in /etc/pki
instead of hardcoding them in the help output. However I missed that
remote_driver.h contains #define for more paths that are present
in the daemon help output.
This commit uses the existing constants for the path to the
configuration file and to the libvirt sockets.
There are constants for these paths in remote_driver.h so we can
use these rather than duplicating them in the help output.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The help message indicates that the CA certificate is
$sysconfdir/pki/CA/caert.pem while the actual path is
$sysconfdir/pki/CA/cacert.pem
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The virtlockd/libvirtd daemons had listed '?' as the short option
for --help. getopt_long uses '?' for any unknown option. We want
to be able to distinguish unknown options (which use EXIT_FAILURE)
from correct usage of help (which should use EXIT_SUCCESS). Thus
we should use 'h' as a short option for --help. Also add this to
the man page docs
The virtlockd/libvirtd daemons did not list any short option
for the --version arg. Add -V as a valid short option, since
-v is already used for --verbose.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This configuration knob lets user to set the length of queue of
connection requests waiting to be accept()-ed by the daemon. IOW, it
just controls the @backlog passed to listen:
int listen(int sockfd, int backlog);
Add a new 'access_drivers' config parameter to the libvirtd.conf
configuration file. This allows admins to setup the default
access control drivers to use for API authorization. The same
driver is to be used by all internal drivers & APIs
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Change the build process & driver initialization so that the
VirtualBox driver is built into libvirtd, instead of libvirt.so
This change avoids the VirtualBox GPLv2-only license causing
compatibility problems with libvirt.so which is under the
GPLv2-or-later license.
NB this change prevents use of the VirtualBox driver on the
Windows platform, until such time as libvirtd can be made
to work there.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
Detected by a simple Shell script:
for i in $(git ls-files -- '*.[ch]'); do
awk 'BEGIN {
fail=0
}
/# *include.*\.h/{
match($0, /["<][^">]*[">]/)
arr[substr($0, RSTART+1, RLENGTH-2)]++
}
END {
for (key in arr) {
if (arr[key] > 1) {
fail=1
printf("%d %s\n", arr[key], key)
}
}
if (fail == 1)
exit 1
}' $i
if test $? != 0; then
echo "Duplicate header(s) in $i"
fi
done;
A later patch will add the syntax-check to avoid duplicate
headers.
As of 1a50ba2cb0 qemu capabilities probing
takes longer since we timeout waiting for the monitor socket. When
probing qemu for different architectures this can add up so the daemon
auto shutdown timeout is reached and the client doesn't have a chance
to connect. To avoid that inhibit daemon shutdown during driver
initialization (which includes capabilities probing).
This fixes
http://honk.sigxcpu.org:8001/job/libvirt-tck-debian-wheezy-qemu-session/227/
When the session dies or when the system is going to be shut down
we issue a virStateStop() call to instruct drivers to prepare to
be stopped. This will remove any previously acquire inhibitions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently to deal with auto-shutdown libvirtd must periodically
poll all stateful drivers. Thus sucks because it requires
acquiring both the driver lock and locks on every single virtual
machine. Instead pass in a "inhibit" callback to virStateInitialize
which drivers can invoke whenever they want to inhibit shutdown
due to existance of active VMs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 905be03d2 quit using the abstract namespace, but didn't
update the --help text to match.
* daemon/libvirtd.c (daemonUsage): Correct socket listing.
This commit changes the behavior of LIBVIRT_DEBUG=1 libvirtd:
$ git show 7022b09111
commit 7022b09111
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Thu Sep 27 13:13:09 2012 +0100
Automatically enable systemd journal logging
Probe to see if the systemd journal is accessible, and if
so enable logging to the journal by default, rather than
stderr (current default under systemd).
Previously 'LIBVIRT_DEBUG=1 /usr/sbin/libvirtd' would show all debug
output to stderr, now it send debug output to the journal.
Only use the journal by default if running in daemon mode, or
if stdin is _not_ a tty. This should make libvirtd launched from
systemd use the journal, but preserve the old behavior in most
situations.
Add two new APIs virNetServerClientNewPostExecRestart and
virNetServerClientPreExecRestart which allow a virNetServerClientPtr
object to be created from a JSON object and saved to a
JSON object, for the purpose of re-exec'ing a process.
This includes serialization of the connected socket associated
with the client
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Probe to see if the systemd journal is accessible, and if
so enable logging to the journal by default, rather than
stderr (current default under systemd).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virInitialize function initializes logging from the env,
so there is no need for another call to virLogSetFromEnv
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Continue consolidation of process functions by moving some
helpers out of command.{c,h} into virprocess.{c,h}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
Based exclusively on work by Eric Blake in a patch posted with the same
subject. However some modifications related to comments and my plans to
add another backend.
Added WITH_INTERFACE as the only automake variable deciding whether to
build the driver and using WITH_NETCF to identify that we're wanting to
use the netcf library as the backend.
* configure.ac: Added with_interface
* src/interface/netcf_driver.c: Renamed..
* src/interface/interface_backend_netcf.c: ..to this to match storage.
* src/interface/netcf_driver.h: Renamed..
* src/interface/interface_driver.h: ..to this.
* daemon/Makefile.am: Respect WITH_INTERFACE and WITH_NETCF.
* libvirt.spec.in: Add RPM support for --with-interface
Recent work to improve support for loadable driver modules introduced
a regression in the xen driver. The legacy xen driver is now a
stateful, libvirtd driver but was not being registered when building
without driver modules.
A slight behavior change was also noted in the xen drivers when
built as driver modules. Previously, explicitly specifying a
connection URI was not necessary, but now
Compiled against library: libvirt 0.10.0
Using library: libvirt 0.10.0
Using API: QEMU 0.10.0
error: failed to get the hypervisor version
error: internal error Cannot find suitable emulator for x86_64
The xen drivers need to be registered before the qemu driver since
the qemu driver will return success with a null connection URI.
This ordering is safe since the xen drivers will decline when not
running the xen kernel.
The commits d575679401 and
080bf330e3 made use directly of
macro defined in recent linux netlink version. Make those
part conditional on the definition
* daemon/libvirtd.c: do not use NETLINK_ROUTE and NETLINK_KOBJECT_UEVENT
without some check first
This patch introduce virNetlinkEventServiceStopAll() to stop
all the monitors to receive netlink messages for libvirtd.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
This patch improve all the API in virnetlink.c to support
all kinds of netlink protocols, and make all netlink sockets
be able to join in groups.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
When running libvirtd from a build directory, libvirtd would load lock
drivers from system directory unless explicitly overridden by setting
LIBVIRT_LOCK_MANAGER_PLUGIN_DIR environment variable. Since we already
autodetect driver directory if libvirt is build with driver modules, we
can use the same trick to automagically set lock driver directory.
Currently there is a hook function that is invoked when a
new client connection comes in, which allows an app to
setup private data. This setup will make it difficult to
serialize client state during process re-exec(). Change to
a model where the app registers a callback when creating
the virNetServerPtr instance, which is used to allocate
the client private data immediately during virNetClientPtr
construction.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When running libvirtd from a build directory on a system with unmodified
libtool, libvirtd's binary is not renamed as "lt-libvirtd". Check for
"/daemon/.libs/libvirtd" in addition to "lt-libvirtd".
Remove the use of a manually run virLogStartup and
virNodeSuspendInitialize methods. Instead make sure they
are automatically run using VIR_ONCE_GLOBAL_INIT
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
WITH_INTERFACE is not defined, it should be WITH_NETCF there to load
the interface driver.
Eric posted patch weeks ago to resolve the problems in the whole
build system, but it's not finalised yet:
https://www.redhat.com/archives/libvir-list/2012-June/msg01299.html
I'm going to simply fix the wrong macro name here so that the
interface driver could loaded, and continue the work on the listing
API for interface driver.
When running directly from GIT, libvirtd attempts to locate
the directory containing loadable modules. This currently
only works if executing libvirtd with a CWD inside the libvirt
source tree. Switch to locate based on the path to the current
binary instead
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
The callback that is invoked when a new RPC client is
initialized does not have any opaque parameter. Add
one so that custom data can be passed into the callback
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Previous commit
commit 32a9aac2e0
Author: William Jon McCann <william.jon.mccann@gmail.com>
Date: Thu May 3 12:36:27 2012 -0400
Use XDG Base Directories instead of storing in home directory
Accidentally changed the umask when creating /var/run/libvirt
to 077. This prevents /var/run/libvirt being readable by non-root,
which is required for non-root to connect to libvirtd. Fix the
code so that umask 077 is only used for the non-privileged libvirtd
instance.
Only the non-privileged libvirtd instance uses $HOME. So avoid
running the code for migrating to XDG directories unless using
a non-privileged libvirtd
Commit 1c275e9a accidentally dropped the storage driver from
libvirtd, because it depended on a C preprocessor macro that
was not defined. Furthermore, if you do './configure
--without-storage-dir --with-storage-disk' or any other combination
where you explicitly build a subset of storage backends excluding
the dir backend, then the build is broken.
Based on analysis by Osier Yang.
* configure.ac (WITH_STORAGE): Define top-level conditional.
* src/Makefile.am (mod_LTLIBRARIES): Build driver even when
storage_dir is disabled.
* daemon/libvirtd.c: Pick up storage driver for any backend, not
just dir.
* daemon/Makefile.am (libvirtd_LDADD): Likewise.
Remove the uid param from virGetUserConfigDirectory,
virGetUserCacheDirectory, virGetUserRuntimeDirectory,
and virGetUserDirectory
These functions were universally called with the
results of getuid() or geteuid(). To make it practical
to port to Win32, remove the uid parameter and hardcode
geteuid()
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* daemon/libvirtd.c: Set custom driver module dir if the current
binary name is 'lt-libvirtd' (indicating execution directly
from GIT checkout)
* src/driver.c, src/driver.h, src/libvirt_driver_modules.syms: Add
virDriverModuleInitialize to allow driver module location to
be changed
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The driver modules all use symbols which are defined in libvirt.so.
Thus for loading of modules to work, the binary that libvirt.so
is linked to must export its symbols back to modules. If the
libvirt.so itself is dlopen()d then the RTLD_GLOBAL flag must
be set. Unfortunately few, if any, programming languages use
the RTLD_GLOBAL flag when loading modules :-( This means is it
not practical to use driver modules for any libvirt client side
drivers (OpenVZ, VMWare, Hyper-V, Remote client, test).
This patch changes the build process so only server side drivers
are built as modules (Xen, QEMU, LXC, UML)
* daemon/libvirtd.c: Add missing load of 'interface' driver
* src/Makefile.am: Only build server side drivers as modules
* src/libvirt.c: Don't load any driver modules
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Due to a bug in editing /etc/sysconfig/libvirtd, VDSM was causing
libvirt processes to run with the following command line args
/usr/sbin/libvirtd --listen '#' 'by vdsm'
While it correctly rejects any invalid option flags, libvirtd
was not rejecting any non-option command line arguments
* daemon/libvirtd.c: Reject non-option argv
The current unprivileged user libvirtd sockets are in the abstract
namespace. This has a number of problems
- You can't connect to them remotely using the nc/ssh tunnel
- This is not portable for OS-X, BSD & probably others
- Parent directory permissions don't apply
As defined in:
http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html
This offers a number of advantages:
* Allows sharing a home directory between different machines, or
sessions (eg. using NFS)
* Cleanly separates cache, runtime (eg. sockets), or app data from
user settings
* Supports performing smart or selective migration of settings
between different OS versions
* Supports reseting settings without breaking things
* Makes it possible to clear cache data to make room when the disk
is filling up
* Allows us to write a robust and efficient backup solution
* Allows an admin flexibility to change where data and settings are stored
* Dramatically reduces the complexity and incoherence of the
system for administrators
DBus connection. The HAL device code further requires that
the DBus connection is integrated with the event loop and
provides such glue logic itself.
The forthcoming FirewallD integration also requires a
dbus connection with event loop integration. Thus we need
to pull the current event loop glue out of the HAL driver.
Thus we create src/util/virdbus.{c,h} files. This contains
just one method virDBusGetSystemBus() which obtains a handle
to the single shared system bus instance, with event glue
automagically setup.
Rename existing daemonConfigLoad API to daemonConfigLoadFile and
add an alternative daemonConfigLoadData
* daemon/libvirtd-config.c, daemon/libvirtd-config.h: Add
daemonConfigLoadData and rename daemonConfigLoad to
daemonConfigLoadFile
* daemon/libvirtd.c: Update for renamed API
To enable creation of unit tests, split the libvirtd config file
loading code out into separate files.
* daemon/libvirtd.c: Delete config loading code / structs
* daemon/libvirtd-config.c, daemon/libvirtd-config.h: Config
file loading APIs
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The code is splattered with a mix of
sizeof foo
sizeof (foo)
sizeof(foo)
Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* Don't advertise information on the network without consent of
the user, either through manual configuration, or a user
interface that drives this option.
* Since libvirtd must be configured for network access anyway
(for all but ssh), this setting was not useful "out of the box",
so changing this default setting does not remove "out of the box"
functionality.
No thanks to 64-bit windows, with 64-bit pid_t, we have to avoid
constructs like 'int pid'. Our API in libvirt-qemu cannot be
changed without breaking ABI; but then again, libvirt-qemu can
only be used on systems that support UNIX sockets, which rules
out Windows (even if qemu could be compiled there) - so for all
points on the call chain that interact with this API decision,
we require a different variable name to make it clear that we
audited the use for safety.
Adding a syntax-check rule only solves half the battle; anywhere
that uses printf on a pid_t still needs to be converted, but that
will be a separate patch.
* cfg.mk (sc_correct_id_types): New syntax check.
* src/libvirt-qemu.c (virDomainQemuAttach): Document why we didn't
use pid_t for pid, and validate for overflow.
* include/libvirt/libvirt-qemu.h (virDomainQemuAttach): Tweak name
for syntax check.
* src/vmware/vmware_conf.c (vmwareExtractPid): Likewise.
* src/driver.h (virDrvDomainQemuAttach): Likewise.
* tools/virsh.c (cmdQemuAttach): Likewise.
* src/remote/qemu_protocol.x (qemu_domain_attach_args): Likewise.
* src/qemu_protocol-structs (qemu_domain_attach_args): Likewise.
* src/util/cgroup.c (virCgroupPidCode, virCgroupKillInternal):
Likewise.
* src/qemu/qemu_command.c(qemuParseProcFileStrings): Likewise.
(qemuParseCommandLinePid): Use pid_t for pid.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* src/conf/domain_conf.h (_virDomainObj): Likewise.
* src/probes.d (rpc_socket_new): Likewise.
* src/qemu/qemu_command.h (qemuParseCommandLinePid): Likewise.
* src/qemu/qemu_driver.c (qemudGetProcessInfo, qemuDomainAttach):
Likewise.
* src/qemu/qemu_process.c (qemuProcessAttach): Likewise.
* src/qemu/qemu_process.h (qemuProcessAttach): Likewise.
* src/uml/uml_driver.c (umlGetProcessInfo): Likewise.
* src/util/virnetdev.h (virNetDevSetNamespace): Likewise.
* src/util/virnetdev.c (virNetDevSetNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* src/conf/storage_conf.h (_virStoragePerms): Use mode_t, uid_t,
and gid_t rather than int.
* src/security/security_dac.c (virSecurityDACSetOwnership): Likewise.
* src/conf/storage_conf.c (virStorageDefParsePerms): Avoid
compiler warning.
This code adds a netlink event interface to libvirt.
It is based upon the event_poll code and makes use of
it. An event is generated for each netlink message sent
to the libvirt pid.
Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
Valgrind detected a pipe fd leak before the parent exits on success,
introduced in commit 4296cea; by itself, the leak is not bad, since
we immediately called _exit(), but we might as well be clean to make
valgrind analysis easier. Meanwhile, if the daemon grandchild detects
an error, the parent failed to flush the error message before exiting.
Also, we had the possibility of both parent and child returning to the
caller, such that the user could see duplicated reports of failure
from the two return paths. And we might as well be robust to the
(unlikely) situation of being started with stdin closed.
* daemon/libvirtd.c (daemonForkIntoBackground): Use exit if an
error message was generated, avoid fd leaks for valgrind's sake,
avoid returning to caller in both parent and child, and don't
close a just-dup'd stdin.
Based on a report by Alex Jia.
* How to reproduce?
% service libvirtd stop
% valgrind -v --track-fds=yes /usr/sbin/libvirtd --daemon
* Actual valgrind result:
==16804== FILE DESCRIPTORS: 7 open at exit.
==16804== Open file descriptor 7:
==16804== at 0x321FAD8B87: pipe (in /lib64/libc-2.12.so)
==16804== by 0x41F34D: daemonForkIntoBackground (libvirtd.c:186)
==16804== by 0x4207A0: main (libvirtd.c:1420)
Signed-off-by: Alex Jia <ajia@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Based on a report by Coverity. waitpid() can leak resources if it
fails with EINTR, so it should never be used without checking return
status. But we already have a helper function that does that, so
use it in more places.
* src/lxc/lxc_container.c (lxcContainerAvailable): Use safer
virWaitPid.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput, virtTestMain):
Likewise.
* src/libvirt.c (virConnectAuthGainPolkit): Simplify with virCommand.
This is a regression introduced by new RPC codes, previously
we advertise the service via ssh even if the daemon doesn't
listen on TLS port (TCP is not choosed). Now the service is
only advertised when it listens on TLS or TCP port. This breaks
upper layer apps which intends to discover the service, such
as virt-manager.
This is a bit painful for example when starting virt-manager
it tends to clutter libvirtd.log with invalid operation on cpu pinning
for defined but not running domains. A priori those kind of errors
don't indicate an error when executing the command but on a precondition
for running the API, and honnestly while the application should report
it, logging it as an error in libvirtd.log is not really useful,
Related bug: https://bugzilla.redhat.com/show_bug.cgi?id=590807
* daemon/libvirtd.c: extend daemonErrorLogFilter() to filter out
errors of type VIR_ERR_OPERATION_INVALID
This patch annotates APIs with low or high priority.
In low set MUST be all APIs which might eventually access monitor
(and thus block indefinitely). Other APIs may be marked as high
priority. However, some must be (e.g. domainDestroy).
For high priority calls (HPC), there are some high priority workers
(HPW) created in the pool. HPW can execute only HPC, although normal
worker can process any call regardless priority. Therefore, only those
APIs which are guaranteed to end in reasonable small amount of time
can be marked as HPC.
The size of this HPC pool is static, because HPC are expected to end
quickly, therefore jobs assigned to this pool will be served quickly.
It can be configured in libvirtd.conf via prio_workers variable.
Default is set to 5.
To mark API with low or high priority, append priority:{low|high} to
it's comment in src/remote/remote_protocol.x. This is similar to
autogen|skipgen. If not marked, the generator assumes low as default.
When libvirtd is running at non-root user, it won't create ${HOME}/.libvirt.
It will show error message:
17:44:16.838: 7035: error : virPidFileAcquirePath:322 : Failed to open pid file
Signed-off-by: Xu He Jie <xuhj@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
