Ever since commit ace4aecd, running 'make check' on RHEL 6 produces:
./test-lib.sh: line 21: realpath: command not found
for every shell script test, because 'realpath' was not part of
coreutils back then.
* tests/test-lib.sh (_scriptdir): Compute with only portable shell.
Signed-off-by: Eric Blake <eblake@redhat.com>
The name is confusing, and there are just two uses: one is a test case,
and the other will be removed as part of an upcoming refactoring of
the hostdev code.
The current code was a little bit odd. At first we've removed all
possible implicit input devices from domain definition to add them later
back if there was any graphics device defined while parsing XML
description. That's not all, while formating domain definition to XML
description we at first ignore any input devices with bus different to
USB and VIRTIO and few lines later we add implicit input devices to XML.
This seems to me as a lot of code for nothing. This patch may look
to be more complicated than original approach, but this is a preferred
way to modify/add driver specific stuff only in those drivers and not
deal with them in common parsing/formating functions.
The update is to add those implicit input devices into config XML to
follow the real HW configuration visible by guest OS.
There was also inconsistence between our behavior and QEMU's in the way,
that in QEMU there is no way how to disable those implicit input devices
for x86 architecture and they are available always, even without graphics
device. This applies also to XEN hypervisor. VZ driver already does its
part by putting correct implicit devices into live XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Those tests are in qemuargv2xmltest and it makes sense to include them
also in qemuxml2xmltest and qemuxml2argvtest.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This will enable regenerate functionality for those tests to make
developer lives easier while updating tests.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Report
error: invalid argument: requested vcpu '100' is not present in the domain
instead of
error: invalid argument: requested vcpu is higher than allocated vcpus
A future patch will refactor the storage of the pinning information in a
way where the ordering will be lost. Order them numerically to avoid
changing the tests later.
Make bhyveload respect boot order as specified by os.boot section of the
domain XML or by "boot order" for specific devices. As bhyve does not
support a real boot order specification right now, it's just about
choosing a single device to boot from.
... and consolidate the cmdline/extra/root parsing to facilitate doing
so.
The logic is the same as xl's parse_cmdline from the current xen.git master
branch (e6f0e099d2c17de47fd86e817b1998db903cab61).
On the formatting side switch to producing cmdline= instead of extra=.
Update a few tests and add serveral more.
- test-cmdline is added to test the exclusive use of cmdline.
- test-fullvirt-direct-kernel-boot.cfg is updated due to the switch
on the formatting side and now tests the exclusive use of cmdline=.
- Tests are added for both paravirt and fullvirt where the .cfg uses
extra= and (paravirt only) root=. These are format (xl->xml) only
since the inverse will generate cmdline= hence is not a round trip
(which was already true if using root=, which used to generate
extra= on the way back).
- Tests are added for both paravirt and fullvirt where the .cfg
declares cmdline= as well as bogus extra= and (paravirt only) root=
entries which should be ignored. Again these are format only tests
since the inverse won't include the bogus lines.
The last two bullets here required splitting the DO_TEST macro into
two halves, as is done in the xmconfigtest.c case.
In order to introduce a use of VIR_WARN for logging I had to add
virerror.h and VIR_LOG_INIT.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Add a new storage pool source device attribute 'part_separator=[yes|no]'
in order to allow a 'disk' storage pool using a device mapper multipath
device to not add the "p" partition separator to the generated device
name when libvirt_parthelper is run.
This will allow libvirt to find device mapper multipath devices which were
configured in /etc/multipath.conf to use 'user_friendly_names' or custom
'alias' names for the LUN.
In the commit aea47e48c4 we have fixed a single pointer within
driver structure. Since all callers pass statically allocated
driver on stack other pointers within driver may contain random
values too. Before touching it lets overwrite it with zeroes and
thus fix all dangling pointers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Autodeflate can be enabled/disabled for memballon device
of model 'virtio'.
xml:
<devices>
<memballoon model='virtio' autodeflate='on'/>
</devices>
qemu:
qemu -device virtio-balloon-pci,...,deflate-on-oom=on
Autodeflate cannot be enabled/disabled for running domain.
Use virDomainDefAddUSBController() to add an EHCI1+UHCI1+UHCI2+UHCI3
controller set to newly defined Q35 domains that don't have any USB
controllers defined.
The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4))
on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A,
so let's attempt to make the virtual machine match that for
controllers with auto-assigned addresses when possible.
Three test cases were added to assure that the proper addresses are
assigned - one with a single set of unaddressed USB controllers, one
with 3 (to grab both preferred slots plus one more), and one with the
order of the controller definitions reordered, to assure that the
auto-assignment isn't mixed up by order.
If the q35 specific disable s3/s4 setting isn't supported, fallback to
specifying the PIIX setting, which is the previous behavior. It doesn't
have any effect, but qemu will just warn about it rather than error:
qemu-system-x86_64: Warning: global PIIX4_PM.disable_s3=1 not used
qemu-system-x86_64: Warning: global PIIX4_PM.disable_s4=1 not used
Since it doesn't error, I don't think we should either, since there
may be configs in the wild that already have q35 + disable_s3/4 (via
virt-manager)
The condition was checking for UHCI (and OHCI for ppc64) availability so
that it can specify the proper device instead of legacy usb. However,
for ppc64, we don't need to check both OHCI and UHCI, but only OHCI as
that is the legacy default. The condition is so big that it was just a
matter of time when someone will make a mistake there, so let's use more
lines so that it is visible what the condition checks for.
This fixes usage of -device instead of -usb for ppc64 that supports
pci-usb-ohci and does not support piix3-usb-uhci.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1297020
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
For some reason we are not setting the driver with memset() to zeros.
But since commit 74abc3deac
driver->securityManager is being accessed and qemuagenttest started
crashing due to that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Future changes will make some of these tests dependent on specific
QEMUCaps flags, so wire up the basic handling. Flags will be added
in future patches.
For the standard active/inactive XML testing, if we leave the file loading
up to the generic XML2XML infrastructure, we get the benefit of
VIR_TEST_REGENERATE_OUTPUT, at the price of a few more disk reads. Seems
worth it.
Since test files are formatted predictably nowadays, we can make
VIR_TEST_REGENERATE_OUTPUT handle most cases for us with a simple
replacement. test-wrap-argv.pl is still canon, but this bit makes
it easier to confirm test output changes during active development.
Both xm and xl config have long supported specifying vif rate
limiting, e.g.
vif = [ 'mac=00:16:3E:74:3d:76,bridge=br0,rate=10MB/s' ]
Add support for mapping rate to and from <bandwidth> in the xenconfig
parser and formatter. rate is mapped to the required 'average' attribute
of the <outbound> element, e.g.
<interface type='bridge'>
...
<bandwidth>
<outbound average='10240'/>
</bandwidth>
</interface>
Also add a unit test to check the conversion logic.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The xen sexpr config format has long supported specifying vif rate
limiting, e.g.
(device
(vif
(mac '00:16:3e:1b:b1:47')
(rate '10240KB/s')
...
)
)
Add support for mapping rate to and from <bandwidth> in the xenconfig
sexpr parser and formatter. rate is mapped to the required 'average'
attribute of the <outbound> element, e.g.
<interface type='bridge'>
...
<bandwidth>
<outbound average='10240'/>
</bandwidth>
</interface>
Also add unit tests to check the conversion logic.
This patch benefits both the old xen driver and the libxl driver.
Both drivers gain support for vif bandwidth when converting to/from
domXML and xen-sxpr. In addition, the old xen driver will now be
able to handle vif 'rate' setting when communicating with xend.
The structure actually contains migration statistics rather than just
the status as the name suggests. Renaming it as
qemuMonitorMigrationStats removes the confusion.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Let's use the new virTestDifferenceFull function that will regenerate
the expected output and fail the test to let developer know that there
something was updated.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This patch enable regeneration of expected output file for
virTestDifferenceFull. It also introduces new
virTestDifferenceFullNoRegenerate function for special cases, where we
don't want to regenerate output.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When this flag is specified, some of the expected output files will be
regenerated with the actual output data. Use helper function like for
other flags.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If user defines a virtio channel with UNIX socket backend and doesn't
care about the path for the socket (e.g. qemu-agent channel), we still
generate it into the persistent XML. Moreover when then user renames
the domain, due to its persistent socket path saved into the per-domain
directory, it will not start. So let's forget about old generated paths
and also stop putting them into the persistent definition.
https://bugzilla.redhat.com/show_bug.cgi?id=1278068
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Just recently, qemu forbade specifying format for sourceless
disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense.
If there's no file to open, why specify its format. Anyway, I
have a domain like this:
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<target dev='hda' bus='ide'/>
<readonly/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
and obviously I am unable to start it. Therefore, a fix on our
side is needed too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
By default, QEMU truncates serial file on open. Sometimes, it could be weird -
for example, when we are trying to investigate some event, which occured several
restarts ago. This patch adds an ability to preserve previous content.
Signed-off-by: Dmitry Mishin <dim@virtuozzo.com>
This replaces the virPCIKnownStubs string array that was used
internally for stub driver validation.
Advantages:
* possible values are well-defined
* typos in driver names will be detected at compile time
* avoids having several copies of the same string around
* no error checking required when setting / getting value
The names used mirror those in the
virDomainHostdevSubsysPCIBackendType enumeration.
From: Ian Campbell <ian.campbell@citrix.com>
xend prior to 4.0 understands vcpus as maxvcpus and vcpu_avail
as a bit map of which cpus are online (default is all).
xend from 4.0 onwards understands maxvcpus as maxvcpus and
vcpus as the number which are online (from 0..N-1). The
upstream commit (68a94cf528e6 "xm: Add maxvcpus support")
claims that if maxvcpus is omitted then the old behaviour
(i.e. obeying vcpu_avail) is retained, but AFAICT it was not,
in this case vcpu==maxcpus==online cpus. This is good for us
because handling anything else would be fiddly.
This patch changes parsing of the virDomainDef maxvcpus and vcpus
entries to use the corresponding 'maxvcpus' and 'vcpus' settings
from xm and xl config. It also drops use of the old Xen 3.x
'vcpu_avail' setting.
The change also removes the maxvcpus limit of MAX_VIRT_VCPUS (since
maxvcpus is simply a count, not a bit mask), which is particularly
crucial on ARM where MAX_VIRT_CPUS == 1 (since all guests are
expected to support vcpu placement, and therefore only the boot
vcpu's info lives in the shared info page).
Existing tests adjusted accordingly, and new tests added for the
'maxvcpus' setting.
Remove use of xendConfigVersion in the s-expresion config formatter/parser
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Change all xml2sexpr tests to use the latest XEND_CONFIG_VERSION
(XEND_CONFIG_VERSION_3_1_0 = 4). Fix tests that do not conform to
the latest version.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
