Shorten the function name as there isn't any vshCommandOptString.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Switch the command parser from using the VSH_OFLAG_REQ_OPT flag
opting out from positional parsing of arguments to a combination of the
'positional' flags for truly positional arguments and
'unwanted_positional' preserving semantics for the existing arguments
where the parser did it due to bad design.
This patch retires VSH_OFLAG_REQ_OPT along with the infrastructure that
was needed to refactor all uses properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically the command parser in virsh parses/fills even optional
arguments with values as if they were positional unless opted out using
VSH_OFLAG_REQ_OPT. This creates unexpected situations when commands can
break in this unwanted semantics:
$ virsh snapshot-create-as --print-xml 1 2 3
<domainsnapshot>
<name>2</name>
<description>3</description>
</domainsnapshot>
To prevent any further addition annotate the rest of the arguments with
the 'unwanted_positional' flag, so that the parser can keep parsing them
as such but any further optional argument will not have this behaviour.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The flag was replaced by the 'required' field in the option definition.
Remove last few uses and all assignments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new 'positional' field to do decisions rather than have a
special type for positional strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add 'positional' and 'required' fields to vshCmdOptDef, which will
explicitly track the two properties of arguments.
To ensure that we have proper coverage, add checks to
vshCmddefCheckInternals validating the state of the above flags by
infering it from existing data.
This conversion will allow us:
- remove VSH_OT_DATA in favor of VSH_OT_STRING
- use VSH_OT_INT when required both as positional and non-positional
- properly annotate which VSH_OT_ARGV are positional and which are not
(currently inferred by whether an previous positional option exists)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Store the pointers to 'help' and 'description' information in the struct
directly rather than in a key-value list.
The generic approach never got any extra use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's obvious that a command is an alias when the 'alias' property is
set, thus an extra flag is redundant. Remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow to modify a node device by using virNodeDeviceDefineXML() to align
its behavior with other drivers define methods.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we can filter persistent and transient node devices in
virConnectListAllNodeDevices(), add these switches also to the
virsh nodedev-list command.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow to dump the XML of the persistent mdev when the mdev has been
started instead of the current state only.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While glibc provides qsort(), which usually is just a mergesort,
until sorting arrays so huge that temporary array used by
mergesort would not fit into physical memory (which in our case
is never), we are not guaranteed it'll use mergesort. The
advantage of mergesort is clear - it's stable. IOW, if we have an
array of values parsed from XML, qsort() it and produce some
output based on those values, we can then compare the output with
some expected output, line by line.
But with newer glibc this is all history. After [1], qsort() is
no longer mergesort but introsort instead, which is not stable.
This is suboptimal, because in some cases we want to preserve
order of equal items. For instance, in ebiptablesApplyNewRules(),
nwfilter rules are sorted by their priority. But if two rules
have the same priority, we want to keep them in the order they
appear in the XML. Since it's hard/needless work to identify
places where stable or unstable sorting is needed, let's just
play it safe and use stable sorting everywhere.
Fortunately, glib provides g_qsort_with_data() which indeed
implement mergesort and it's a drop in replacement for qsort(),
almost. It accepts fifth argument (pointer to opaque data), that
is passed to comparator function, which then accepts three
arguments.
We have to keep one occurance of qsort() though - in NSS module
which deliberately does not link with glib.
1: https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=03bf8357e8291857a435afcc3048e0b697b6cc04
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The node device APIs which get XML from the user don't yet support XML
validation flags. Introduce virNodeDeviceCreateXMLFlags and
virNodeDeviceDefineXMLFlags with the appropriate flags and add virsh
support for the new flags.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Historically, the dumpxml command reject any unknown arguments,
for instance:
virsh dumpxml fedora xxx
However, after v8.5.0-rc1~31 the second argument ('xxx') is
treated as an XPath, but it's not that clearly visible.
Therefore, require the --xpath switch, like this:
virsh dumpxml fedora --xpath xxx
Yes, this breaks already released virsh, but I think we can argue
that the pool of users of this particular function is very small.
We also document the argument being mandatory:
dumpxml [--inactive] [--security-info] [--update-cpu] [--migratable]
[--xpath EXPRESSION] [--wrap] domain
The sooner we do this change, the better.
The same applies for other *dumpxml functions (net-dumpxml,
pool-dumpxml, vol-dumpxl to name a few).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2103524
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
While you can chain the virsh output up to a later 'xmllint' or 'xpath'
command, integrating it into virsh avoids needs for installing extra
binaries which we've often found to be missing on production installs
of libvirt. It also gives better response if the initial virsh command
hits an error, as you don't get an aborted pipeline.
$ virsh pool-dumpxml --xpath //permissions default
<permissions>
<mode>0711</mode>
<owner>1000</owner>
<group>1000</group>
<label>unconfined_u:object_r:svirt_home_t:s0</label>
</permissions>
If multiple nodes match, they are emitted individually:
$ virsh dumpxml --xpath '//devices/*/address[@type="pci"]' --wrap demo
<address type="pci" domain="0x0000" bus="0x05" slot="0x00" function="0x0"/>
<address type="pci" domain="0x0000" bus="0x03" slot="0x00" function="0x0"/>
...snip...
<address type="pci" domain="0x0000" bus="0x00" slot="0x02" function="0x0" multifunction="on"/>
<address type="pci" domain="0x0000" bus="0x07" slot="0x00" function="0x0"/>
but if intending to post-process the output further, the results
can be wrapped in a parent node
$ virsh dumpxml --xpath '//devices/*/address[@type="pci"]' --wrap demo
<nodes>
<address type="pci" domain="0x0000" bus="0x05" slot="0x00" function="0x0"/>
<address type="pci" domain="0x0000" bus="0x03" slot="0x00" function="0x0"/>
...snip...
<address type="pci" domain="0x0000" bus="0x00" slot="0x02" function="0x0" multifunction="on"/>
<address type="pci" domain="0x0000" bus="0x07" slot="0x00" function="0x0"/>
</nodes>
Fixes https://gitlab.com/libvirt/libvirt/-/issues/244
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The KVM device assignment was removed in v5.7.0-rc1~103 but virsh
and its manpage still mention it. Don't do that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This change was generated using the following spatch:
@ rule1 @
expression a;
identifier f;
@@
<...
- f(*a);
... when != a;
- *a = NULL;
+ g_clear_pointer(a, f);
...>
@ rule2 @
expression a;
identifier f;
@@
<...
- f(a);
... when != a;
- a = NULL;
+ g_clear_pointer(&a, f);
...>
Then, I left some of the changes out, like tools/nss/ (which
doesn't link with glib) and put back a comment in
qemuBlockJobProcessEventCompletedActiveCommit() which coccinelle
decided to remove (I have no idea why).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In some cases we have a label that contains nothing but a return
statement. The amount of such labels rises as we use automagic
cleanup. Anyway, such labels are pointless and can be dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In a few cases we call a public API, wrapped in an if() statement
with both branches written out explicitly. The error branch jumps
onto cleanup label, while the successful prints out a message.
Right after these ifs there's 'ret = true;' and the cleanup
label. The code is a bit more readable if only the error branch
is kept and printing happens at the same level as setting the ret
variable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Kristína Hanicová <khanicov@redhat.com>
* XML serialization and deserialization of PCI VPD;
* PCI VPD capability flags added and used in relevant places;
* XML to XML tests for the added capability.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
This is currently the only way to view the 'autostart' property for a
node device in virsh.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add ability to set node devices to autostart on boot or parent device
availability.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Allow the tree view with --all so that we can see all inactive mdevs in
a tree structure nested under their parent devices.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically, we declared pointer type to our types:
typedef struct _virXXX virXXX;
typedef virXXX *virXXXPtr;
But usefulness of such declaration is questionable, at best.
Unfortunately, we can't drop every such declaration - we have to
carry some over, because they are part of public API (e.g.
virDomainPtr). But for internal types - we can do drop them and
use what every other C project uses 'virXXX *'.
This change was generated by a very ugly shell script that
generated sed script which was then called over each file in the
repository. For the shell script refer to the cover letter:
https://listman.redhat.com/archives/libvir-list/2021-March/msg00537.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Follow best practices and add a unsigned int flags parameter to these
new APIs that have not been in a release yet.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This virsh command maps to virNodeDeviceCreate(), which starts a node
device that has been previously defined by virNodeDeviceDefineXML().
This is only supported for mediated devices.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add a virsh command that maps to virNodeDeviceUndefine().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Several functions accept providing a node device by name or by wwnn,wwpn
pair. Extract the logic to do this into a function that can be used by
both callers.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add a virsh command that maps to virNodeDeviceDefineXML().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we can filter active and inactive node devices in
virConnectListAllNodeDevices(), add these switches to the virsh command.
Eventual output (once everything is hooked up):
virsh # nodedev-list --cap mdev
mdev_bd2ea955_3402_4252_8c17_7468083a0f26
virsh # nodedev-list --inactive --cap mdev
mdev_07d8b8b0_7e04_4c0f_97ed_9214ce12723c
mdev_927c040f_ae7d_4a35_966e_286ba6ebbe1c
virsh # nodedev-list --all --cap mdev
mdev_07d8b8b0_7e04_4c0f_97ed_9214ce12723c
mdev_927c040f_ae7d_4a35_966e_286ba6ebbe1c
mdev_bd2ea955_3402_4252_8c17_7468083a0f26
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since a mediated device can be persistently defined by the mdevctl
backend, we need additional lifecycle events beyond CREATED/DELETED to
indicate that e.g. the device has been stopped but the device definition
still exists.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add support to filter by 'ap_matrix' capability.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add support for AP matrix device in libvirt node device driver.
https://www.kernel.org/doc/html/latest/s390/vfio-ap.html#the-design
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add support to filter by 'ap_card' and 'ap_queue' capabilities.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Each AP card device can support upto 256 AP queues. AP queues are
also detected by udev, so add support for libvirt nodedev driver.
https://www.kernel.org/doc/html/latest/s390/vfio-ap.html#ap-architectural-overview
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Introduce support for the Adjunct Processor (AP) crypto card device.
Udev already detects the device, so add support for libvirt nodedev
driver.
https://www.kernel.org/doc/html/latest/s390/vfio-ap.html#ap-architectural-overview
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The current udev node device driver ignores all events related to vdpa
devices. Since libvirt now supports vDPA network devices, include these
devices in the device list.
Example output:
virsh # nodedev-list
[...ommitted long list of nodedevs...]
vdpa_vdpa0
virsh # nodedev-dumpxml vdpa_vdpa0
<device>
<name>vdpa_vdpa0</name>
<path>/sys/devices/vdpa0</path>
<parent>computer</parent>
<driver>
<name>vhost_vdpa</name>
</driver>
<capability type='vdpa'>
<chardev>/dev/vhost-vdpa-0</chardev>
</capability>
</device>
NOTE: normally the 'parent' would be a PCI device instead of 'computer',
but this example output is from the vdpa_sim kernel module, so it
doesn't have a normal parent device.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Allow to filter for CSS devices.
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
