Commit Graph

2203 Commits

Author SHA1 Message Date
Eric Blake
2efb42e9ac virsh: Add 'echo --err' option
Since test:///default resets state on every connection, writing a test
that covers a sequence of commands must be done from a single
session. But if the test wants to exercise particular failure modes as
well as successes, it can be nice to leave witnesses in the stderr
stream immediately before and after the spot where the expected error
should be, to ensure the rest of the script is not causing errors.

Do this by adding an --err option.

Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
2019-03-25 09:02:02 -05:00
Eric Blake
4e650259f9 virsh: Treat any command name starting with # as comment
As the previous commit mentioned, argv mode (such as when you feed
virsh via stdin with <<\EOF instead of via a single shell argument)
didn't permit comments. Do this by treating any command name token
that starts with # as a comment which silently eats all remaining
arguments to the next newline or semicolon.

Note that batch mode recognizes unquoted # at the start of any word as
a command as part of the tokenizer, while this patch only treats # at
the start of the command word as a comment (any other # remaining by
the time vshCommandParse() is processing things was already quoted
during the tokenzier, and as such was probably intended as the actual
argument to the command word earlier in the line).

Now I can do something like:

$ virsh -c test:///default <<EOF
  # setup
  snapshot-create-as test s1
  snapshot-create-as test s2
  # check
  snapshot-list test --name
EOF

Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
2019-03-25 09:01:53 -05:00
Eric Blake
834f64ca47 virsh: Parse # comments in batch mode
Continuing from what I did in commit 4817dec0, now I want to write a
sequence that is self-documenting.  So I need comments :)

Now I can do something like:

$ virsh -c test:///default '
  # setup
  snapshot-create-as test s1
  snapshot-create-as test s2
  # check
  snapshot-list test --name
'

Note that this does NOT accept comments in argv mode, another patch
will tackle that.

(If I'm not careful, I might turn virsh into a full-fledged 'sh'
replacement? Here's hoping I don't go that far...)

Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
2019-03-25 09:01:42 -05:00
Eric Blake
de80cdbcc9 snapshot: Refactor list filtering
Separate the algorithm for which list members to vist (which is
generic and can be shared with checkpoints, provided that common
filtering bits are either declared with the same value or have a
mapping from public API to common value) from the decision on which
members to return (which is specific to snapshots).  The typedef for
the callback function feels a bit heavy here, but will make it easier
to move the common portions in a later patch.

As part of the refactoring, note that the macros for selecting filter
bits are specific to listing functionality, so they belong better in
virdomainsnapshotobjlist.h (missed in commit 9b75154c).

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-03-22 01:18:33 -05:00
Peter Krempa
61d1abd5f1 virsh: man: Document asynchronous behaviour of detach-device-alias
This command is fully async. Note that users can use virsh event to be
notified of the guest actually removing the device.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2019-03-18 13:11:29 +01:00
Peter Krempa
e95a66349a virsh: man: Document quirks of device-detach and friends
Mention that successful return does not equal to device being detached
similarly as we do at the API level.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2019-03-18 13:11:29 +01:00
Michal Privoznik
d8b2ec2149 virsh-pool: Offer only active pool for pool-refresh completer
Only active pools can be refreshed. But our completer offers just
all pool, even inactive ones.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2019-03-16 07:50:51 +01:00
Andrea Bolognani
912fe2df9d Drop support for "Red Hat" init scripts
Despite the misleading name, these were supposed to be used
with a System V style init; however, none of the platforms we
target is using that kind of init anymore: almost all Linux
distributions have switched to systemd, those that haven't
(such as Gentoo and Alpine) are mostly using OpenRC with
custom init scripts, and the BSDs have been doing their own
thing all along.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-15 18:36:19 +01:00
Cole Robinson
f38d553e2d configure: Remove --enable-test-coverage
We provide a custom configure option --enable-test-coverage and
'make cov' target to generate code coverage reports. However gnulib
already provides a 'make coverage' which 'just works' and doesn't
require a special configure option.

This drops our custom implementation in favor of 'make coverage'.
Reports are now output to cov/index.html

Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-14 20:47:15 -04:00
Eric Blake
c615c14246 virsh: Add snapshot-list --topological
For snapshots, virsh already has a (shockingly naive [1]) client-side
topological sorter with the --tree option. But as a series of REDEFINE
calls must be presented in topological order, it's worth letting the
server do the work for us, especially since the server can give us a
topological sorting with less effort than our naive client
reconstruction.

[1] The XXX comment in virshSnapshotListCollect() about --tree being
O(n^3) is telling; https://en.wikipedia.org/wiki/Topological_sorting
is an interesting resource describing Kahn's algorithm and other
approaches for O(n) topological sorting for anyone motivated to use a
more elegant algorithm than brute force - but that doesn't affect this
patch.

For now, I am purposefully NOT implementing virsh fallback code to
provide a topological sort when the flag was rejected as unsupported;
we can worry about that down the road if users actually demonstrate
that they use new virsh but old libvirt to even need the fallback.
(The code we use for --tree could be repurposed to be such a fallback,
whether or not we keep it naive or improve it to be faster - but
again, no one should spend time on a fallback without evidence that we
need it.)

The test driver makes it easy to test:
$ virsh -c test:///default '
snapshot-create-as test a
snapshot-create-as test c
snapshot-create-as test b
snapshot-list test
snapshot-list test --topological
snapshot-list test --descendants a
snapshot-list test --descendants a --topological
snapshot-list test --tree
snapshot-list test --tree --topological
'

Without any flags, virsh does client-side sorting alphabetically, and
lists 'b' before 'c' (even though 'c' is the parent of 'b'); with the
flag, virsh skips sorting, and you can now see that the server handed
back data in a correct ordering. As shown here with a simple linear
chain, there isn't any other possible ordering, so --tree mode doesn't
seem to care whether --topological is used.  But it is possible to
compose more complicated DAGs with multiple children to a parent
(representing reverting back to a snapshot then creating more
snapshots along those divergent execution timelines), where it is then
possible (but not guaranteed) that adding the --topological flag
changes the --tree output (the client-side --tree algorithm breaks
ties based on alphabetical sorting between two nodes that share the
same parent, while the --topological sort skips the client-side
alphabetical sort and ends up exposing the server's internal order for
siblings, whether that be historical creation order or dependent on a
random hash seed).  But even if the results differ, they will still be
topologically correct.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-12 20:46:09 -05:00
Peter Krempa
eae99ca97e tools: vsh: Don't use assert()
It's meant for testing, not for production builds. Also we have a helper
for reporting OOM errors. Introduced by 23e0bf1c4e

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2019-03-12 14:17:02 +01:00
Eric Blake
23e0bf1c4e virsh: Make self-test failures noisy
In local testing, I accidentally introduced a self-test failure,
and spent way too much time debugging it. Make sure the testsuite
log includes some hint as to why command option validation failed.
Lone exception: allocation failure is unlikely during self-test,
and if it happens, we are better off asserting (vsh.c can do this,
even if libvirt.so cannot).

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
2019-03-12 06:37:48 -05:00
Thomas Huth
d38d512f4e tools/virt-host-validate: Fix IOMMU check on s390x
When running virt-host-validate on an s390x host, the tool currently warns
that it is "Unknown if this platform has IOMMU support". We can use the
common check for entries in /sys/kernel/iommu_groups here, too, but it only
makes sense to check it if there are also PCI devices available. It's also
common on s390x that there are no PCI devices assigned to the LPAR, and in
that case there is no need for the PCI-related IOMMU, so without PCI devices
we should simply skip this test.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2019-03-08 09:16:00 +01:00
Andrea Bolognani
094f29df07 Use virStringHasSuffix() where possible
When dealing with internal paths we don't need to worry about
whether or not suffixes are lowercase since we have full control
over them, which means we can avoid performing case-insensitive
string comparisons.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
2019-03-07 10:10:49 +01:00
Andrea Bolognani
2de7dcba7e util: Rename virFileHasSuffix() to virStringHasCaseSuffix()
Despite its name, this is really just a general-purpose string
manipulation function, so it should be moved to the virstring
module and renamed accordingly.

In addition to the obvious s/File/String/, also tweak the name
to make it clear that the presence of the suffix is verified
using case-insensitive comparison.

A few trivial whitespace changes are squashed in.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
2019-03-07 10:08:47 +01:00
Michal Privoznik
ab2e90006d Drop some useless comparisons and checks
In these cases the check that is removed has been done a few
lines above already (as can even be seen in the context). Drop
them.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2019-03-07 09:22:47 +01:00
John Ferlan
d9a4115892 virsh: Expose virConnectGetStoragePoolCapabilities
https://bugzilla.redhat.com/show_bug.cgi?id=1581670

Add a new storage pool command "pool-capabilities" to output
the storage pool capabilities.

Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
2019-03-06 11:12:48 -05:00
Lin Ma
397369853d virsh: Add event name completion to 'network-event' command
Signed-off-by: Lin Ma <lma@suse.com>
2019-03-05 09:09:48 +01:00
Lin Ma
96837ab140 virsh-network: Introduce virshNetworkEventCallback to handle network events
Signed-off-by: Lin Ma <lma@suse.com>
2019-03-05 09:09:48 +01:00
Lin Ma
ab8aa7ccc8 virsh: Add device name completion for target option of detach-disk command
Signed-off-by: Lin Ma <lma@suse.com>
2019-03-05 09:09:48 +01:00
Eric Blake
d152c727c6 snapshots: Avoid term 'checkpoint' for full system snapshot
Upcoming patches plan to introduce virDomainCheckpointPtr as a new
object for use in incremental backups, along with documentation on
how incremental backups differ from snapshots.  But first, we need
to rename any existing mention of a 'system checkpoint' to instead
be a 'full system snapshot', so that we aren't overloading
the term checkpoint.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-02-26 15:48:58 -06:00
Eric Blake
5817dec014 virsh: Elide backslash-newline in batch mode
The previous patch made it possible to split multiple commands by
adding newline, but not to split a long single command. The sequence
backslash-newline was being used as if it were a quoted newline
character, rather than completely elided the way the shell does.

Again, add more tests, although this time it seems more like I am
suffering from a leaning-toothpick syndrome with all the \.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-02-26 15:42:21 -06:00
Eric Blake
fe1b683fd0 virsh: Treat \n like ; in batch mode
I wanted to do a demonstration with virsh batch mode, which
takes multiple commands all packed into a single argument:

$ virsh -c test:///default 'echo a; echo b;'
a
b

but that produced a really long line, so I tried to make it
more legible:

$ virsh -c test:///default '
   echo a;
   echo b;
'
error: unknown command: '
'

Let's be more like the shell, and treat unquoted newline as a
command separator just as we do for semicolon.  In fact, with
that, I can even now mix styles:

$ virsh -c test:///default '
   echo a; echo b
   echo c
'
a
b
c

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-02-26 14:16:04 -06:00
Daniel P. Berrangé
e97d7733fe virsh: fix return value in storage vol name completor
The function must return a pointer, not a boolean. Fortunately 'false'
is equivalent to 'NULL' so this bug no had ill effect previously.

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-02-19 16:06:46 +00:00
Ján Tomko
d3e5c3605a virsh: fix snapshot list --parent
The root snapshot does not have a parent.
Use NULLSTR_EMPTY to pass an empty string instead of putting
too few columns in the table.

https://bugzilla.redhat.com/show_bug.cgi?id=1662849

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2019-02-14 16:37:24 +01:00
Ján Tomko
0f110d5ac8 Use NULLSTR_EMPTY
Instead of repetitive:
  s ? s : ""
use NULLSTR_EMPTY.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2019-02-14 14:09:38 +01:00
Ján Tomko
77908cfcda Remove EMPTYSTR macro
This macro neither takes nor produces an empty string.
Remove it in favor of NULLSTR_MINUS.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2019-02-14 14:09:38 +01:00
Ján Tomko
57f5262868 tools: use NULLSTR_MINUS
Use the newly introduced macro in the few places that open-code it.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2019-02-14 14:09:37 +01:00
Ján Tomko
6dbe6e4cec virsh: initialize info in cmdIOThreadInfo
Although it is not needed at the moment, do not rely on a value being
set before the first jump to cleanup.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-02-13 13:58:56 +01:00
Ján Tomko
4c44c9f456 virsh: remove redundant virshNodeGetCPUCount
Since commit 4c4b821e it is not used for anything.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-02-13 13:58:55 +01:00
Ján Tomko
4834c9a4bd virsh: do not assign negative values to niothreads
Use a temporary 'rc' variable to avoid comparing signed
and unsigned integers in the cleanup section.

Bug introduced by commit 3072ded which added the comparison against
the unsigned 'i'.

Also make niothreads size_t to mark that it should be unsigned.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-02-13 13:58:55 +01:00
Ján Tomko
3ce86316a8 virsh: reduce the optimism in cmdIOThreadInfo
Instead of using niothreads which defaults to zero, use the common
pattern with a ret varaible set to true just before the cleanup label.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-02-13 13:58:55 +01:00
Ján Tomko
0f87356c51 virsh: allow empty targets in cmdDomFSInfo
Ever since the introduction of the guest-get-fsinfo command
in QEMU commit 46d4c572 qga/qapi-schema.json says that
the 'disks' array can possibly be empty. For example when getting
the target list is unsupported:
https://bugzilla.redhat.com/show_bug.cgi?id=1567041

Pass an empty string instead of NULL to vshTableRowAppend to prevent
a mismatched column number.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-02-12 13:50:10 +01:00
Ján Tomko
0e7707d830 virsh: use virBufferTrim in cmdDomFSInfo
Add comma after every string and trim the final one.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-02-12 10:14:53 +01:00
Ján Tomko
066d91ec79 virsh: do not report error on zero filesystems in cmdDomFSInfo
Use vshPrintExtra to report this message. It is a human-readable
explanation rather than an error.

Also, it is a very special system that runs with no filesystems.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-02-12 10:14:53 +01:00
Ján Tomko
023f0672d4 virsh: introduce 'ret' in cmdDomFSInfo
Failing to print the table is also a reason to return failure
and print the reported error.

Switch to the usual pattern where we fall through the cleanup
label right after setting ret to true instead of infering the
return value from the number of filesystems returned.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-02-12 10:14:53 +01:00
Ján Tomko
eb3f5a2c6d virsh: do not access uninitialized memory in cmdDomFSInfo
Initialize 'info' to prevent accessing random access memory.

Introduced by commit 3072ded released in 4.8.0.

https://bugzilla.redhat.com/show_bug.cgi?id=1676354

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-02-12 10:14:53 +01:00
Ján Tomko
44993d312d virsh: rename ret to rc in cmdDomFSInfo
Leave the 'ret' variable for the current function's return value.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-02-12 10:14:53 +01:00
Ján Tomko
443fc056a0 virsh: introduce ninfos variable in cmdDomFSInfo
Do not use 'ret' throughout the whole function to avoid confusion
and comparison of unsigned 'i' against signed 'ret'.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-02-12 10:14:53 +01:00
Ján Tomko
b419ea6a90 vsh-table: allow empty columns
Trivially implement this by deleting the bogus check in
vshTableSafeEncode.

Now it returns an empty string for an empty string instead
of returning NULL without setting an error.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-02-12 10:14:53 +01:00
Michal Privoznik
1620bb0a30 tools: Drop support for pre-2.4.0 wireshark
The wireshark-2.4.0 is almost 2 years old now. Assuming anybody
interested in running latest libvirt doesn't run old wireshark,
it is safe to do this. It also simplifies the code.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-02-12 09:22:59 +01:00
Michal Privoznik
4c22fd717b wireshark: Provide registration code for newer wireshark
As advertised in previous commits, wireshark has changed the way
that plugins register. In fact, it has done so two times since
the last time we've touched our code (wireshark v2.5.0 and
v2.9.0). Use the wireshark script from respective releases to
generate newer registration callbacks and put them into our code.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-02-12 09:22:59 +01:00
Michal Privoznik
a87a75e579 tools: Keep wireshark plugin registration code in git
In order to be able to dissect libvirt protocol the wireshark
plugin needs to be registered. So far this plugin registration
code was generated on every build using a script that was copied
over from wireshark's tools/ directory.

This is suboptimal, because the way that plugins register changes
across wireshark releases. Therefore, let's keep the generated
file in the git, put the command line used to generate the file
into a comment and remove the script.

This solution allows us to put different registration mechanism
into one file (under #ifdef-s) and thus compile with wider range
of wireshark releases.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-02-12 09:22:59 +01:00
Michal Privoznik
b76f4dec37 tools: Cleanup packet-libvirt.h
Move the majority of the packet-libvirt.h content into
packet-libvirt.c and expose only register functions which are the
only ones that are not static.

The rationale behind is that packet-libvirt.h will be included
from packet.c and therefore the header file needs to be as clean
as possible.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-02-12 09:22:59 +01:00
Jiri Denemark
f15789ecac virsh: Add support for setting post-copy migration bandwidth
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-02-07 16:25:59 +01:00
Cole Robinson
6a4d938dd3 Require a semicolon for VIR_ENUM_IMPL calls
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_IMPL calls.

Move the verify() statement to the end of the macro and drop
the semicolon, so the compiler will require callers to add a
semicolon.

While we are touching these call sites, standardize on putting
the closing parenth on its own line, as discussed here:
https://www.redhat.com/archives/libvir-list/2019-January/msg00750.html

Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-02-03 17:46:29 -05:00
Cole Robinson
7662194bf3 Require a semicolon to VIR_ENUM_DECL calls
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_DECL calls.

Drop the semicolon from the final statement of the macro, so
the compiler will require callers to add a semicolon.

Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-02-03 17:46:29 -05:00
John Ferlan
a3dbaa3647 virsh: Add source-protocol-ver for pool commands
Allow the addition of the <protocol ver='n'/> to the provided XML.

Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-01-29 19:16:13 -05:00
Michal Privoznik
5772885d28 lib: Use more of VIR_STEAL_PTR()
We have this very handy macro called VIR_STEAL_PTR() which steals
one pointer into the other and sets the other to NULL. The
following coccinelle patch was used to create this commit:

  @ rule1 @
  identifier a, b;
  @@

  - b = a;
    ...
  - a = NULL;
  + VIR_STEAL_PTR(b, a);

Some places were clean up afterwards to make syntax-check happy
(e.g. some curly braces were removed where the body become a one
liner).

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2019-01-28 14:46:58 +01:00
Michal Privoznik
2707d4f8bc tools: Document completer callback
Strictly speaking, this should go near vshCompleter typedef
declaration. However, I find it more useful near actual completer
implementations.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-01-25 15:44:36 +01:00