Subscribe to events from parallels server. It's
needed for 2 things: to update cached domains list
and to send corresponding libvirt events.
Parallels server sends a lot of different events, in
this patch we handle only some of them. In the future
we can handle for example, changes in a host network
configuration or devices states.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Move macro parallelsDomNotFoundError to file parallels_utils.h, because
it will be used in parallels_sdk.c.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Obtain information about domains using parallels sdk instead of prlctl.
prlsdkLoadDomains functions behaves as former parallelsLoadDomains with
NULL as second parameter (name) - it fills parallelsConn.domains list.
prlsdkLoadDomain is now able to update specified domain by given
virDomainObjPtr.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1082521
Support for shared hostdev's was added in a number of commits, initially
starting with 'f2c1d9a80' and most recently commit id 'fd243fc4' to fix
issues with the initial implementation. Missed in all those changes was
the need to mimic the virSELinux{Set|Restore}SecurityDiskLabel code to
handle the "shared" (or shareable) and readonly options when Setting
or Restoring the SELinux labels.
This patch will adjust the virSecuritySELinuxSetSecuritySCSILabel to not
use the virSecuritySELinuxSetSecurityHostdevLabelHelper in order to set
the label. Rather follow what the Disk code does by setting the label
differently based on whether shareable/readonly is set. This patch will
also modify the virSecuritySELinuxRestoreSecuritySCSILabel to follow
the same logic as virSecuritySELinuxRestoreSecurityImageLabelInt and not
restore the label if shared/readonly
https://bugzilla.redhat.com/show_bug.cgi?id=1171582
When we edit a negative controller address number to a device,
some of them will auto generate a controller with invalid index
number. This will make guest disappear after restart libvirtd.
Instead of allowing negative number for controller index, we
should forbid negative number in these place (we did this before,
but after f18c02ec, virStrToLong_ui changed to allow negative
number). Therefore switch to virStrToLong_uip in these places.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Avoid leaving the domain locked on a failed ACL check in
qemuDomainMigratePerform() and qemuDomainMigrateFinish2().
Introduced in commit abf75aea24 (Add ACL checks into the QEMU driver).
The module XML::XPath is needed when building from git only (no need to
have it when building from tarball), so this patch moves the check from
specfile into bootstrap.conf.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Several portability changes, but the one we are most interested in
is the improvement to bootstrap to detect perl modules.
This patch doesn't actually change our bootstrap requirements
(that will be a separate patch), but sets the stage for it.
* .gnulib: Update to latest.
* bootstrap: Regenerate from upstream.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit c75425734 introduced a compilation failure:
../../src/access/viraccessdriverpolkit.c: In function 'virAccessDriverPolkitCheck':
../../src/access/viraccessdriverpolkit.c:137:5: error: format '%d' expects argument of type 'int', but argument 9 has type 'pid_t' [-Werror=format=]
VIR_DEBUG("Check action '%s' for process '%d' time %lld uid %d",
^
Since mingw pid_t is 64 bits, it's easier to just follow what we've
done elsewhere and cast to a large enough type when printing pids.
* src/access/viraccessdriverpolkit.c (virAccessDriverPolkitCheck):
Add cast.
Signed-off-by: Eric Blake <eblake@redhat.com>
lxcProcessSetupInterfaces() used to have a special case for
actualType='network' (a network with forward mode of route, nat, or
isolated) to call the libvirt public API to retrieve the bridge being
used by a network. That is no longer necessary - since all network
types that use a bridge and tap device now get the bridge name stored
in the ActualNetDef, we can just always use
virDomainNetGetActualBridgeName() instead.
qemuNetworkIfaceConnect() used to have a special case for
actualType='network' (a network with forward mode of route, nat, or
isolated) to call the libvirt public API to retrieve the bridge being
used by a network. That is no longer necessary - since all network
types that use a bridge and tap device now get the bridge name stored
in the ActualNetDef, we can just always use
virDomainNetGetActualBridgeName() instead.
(an audit of the two callers to qemuNetworkIfaceConnect() confirms
that it is never called for any other type of network, so the dead
code in the else statement (logging an internal error if it is called
for any other type of network) is eliminated in the process.)
When libvirt is managing the MAC table of a Linux host bridge, it must
turn off learning and unicast_flood for each tap device attached to
that bridge, then add a Forwarding Database (fdb) entry for the tap
device using the MAC address from the domain interface config.
Once we have disabled learning and flooding, any packet that has a
destination MAC address not present in the fdb will be dropped by the
bridge. This, along with the opportunistic disabling of promiscuous
mode[*], can result in enhanced network performance. and a potential
slight security improvement.
[*] If there is only one device on the bridge with learning/unicast_flood
enabled, then that device will automatically have promiscuous mode
disabled. If there are *no* devices with learning/unicast_flood
enabled (e.g. for a libvirt "route", "nat", or isolated network that
has no physical device attached), then all non-tap devices will have
promiscuous mode disabled (tap devices always have promiscuous mode
enabled, which may be a bug in the kernel, but in practice has 0
effect).
None of this has any effect for kernels prior to 3.15 (upstream kernel
commit 2796d0c648c940b4796f84384fbcfb0a2399db84 "bridge: Automatically
manage port promiscuous mode"). Even after that, until kernel 3.17
(upstream commit 5be5a2df40f005ea7fb7e280e87bbbcfcf1c2fc0 "bridge: Add
filtering support for default_pvid") traffic will not be properly
forwarded without manually adding vlan table entries. Unfortunately,
although the presence of the first patch is signalled by existence of
the "learning" and "unicast_flood" options in sysfs, there is no
reliable way to query whether or not the system's kernel has the
second of those patches installed, the only thing that can be done is
to try the setting and see if traffic continues to pass.
When the bridge device for a network has macTableManager='libvirt' the
intent is that all kernel management of the bridge's MAC table
(Forwarding Database, or fdb, in the case of a Linux Host Bridge) be
disabled, with libvirt handling updates to the table instead. The
setup required for the bridge itself is:
1) set the "vlan_filtering" property of the bridge device to 1.
2) If the bridge has a "Dummy" tap device used to set a fixed MAC
address on the bridge (which is always the case for a bridge created
by libvirt, and never the case for a bridge created by the host system
network config), turn off learning and unicast_flood on this tap (this
is needed even though this tap is never IFF_UP, because the kernel
ignores the IFF_UP flag of devices when using their settings to
automatically decide whether or not to turn off promiscuous mode for
any attached device).
(1) is done both for libvirt-created/managed bridges, and for bridges
that are created by the host system config, while (2) is done only for
bridges created by libvirt (i.e. for forward modes of nat, routed, and
isolated bridges)
There is no attempt to turn vlan_filtering off when destroying the
network because in the case of a libvirt-created bridge, the bridge is
about to be destroyed anyway, and in the case of a system bridge, if
the other devices attached to the bridge could operate properly before
destroying libvirt's network object, they will continue to operate
properly (this is similar to the way that libvirt will enable
ip_forwarding whenever a routed/natted network is started, but will
never attempt to disable it if they are stopped).
At the time that the network driver allocates a connection to a
network, the tap device that will be used hasn't yet been created -
that will be done later by qemu (or lxc or whoever) - but if the
network has macTableManager='libvirt', then when we do get around to
creating the tap device, we will need to add an entry for it to the
network bridge's fdb (forwarding database) *and* turn off learning and
unicast_flood for that tap device in the bridge's sysfs settings. This
means that qemu needs to know both the bridge name as well as the
setting of macTableManager, so we either need to create a new API to
retrieve that info, or just pass it back in the ActualNetDef that is
created during networkAllocateActualDevice. We choose the latter
method, since it's already done for the bridge device, and it has the
side effect of making the information available in domain status.
(NB: in the future, I think that the tap device should actually be
created by networkAllocateActualDevice(), as that will solve several
other problems, but that is a battle for another day, and this
information will still be useful outside the network driver)
When the actualType of a virDomainNetDef is "network", it means that
we are connecting to a libvirt-managed network (routed, natted, or
isolated) which does use a bridge device (created by libvirt). In the
past we have required drivers such as qemu to call the public API to
retrieve the bridge name in this case (even though it is available in
the NetDef's ActualNetDef if the actualType is "bridge" (i.e., an
externally-created bridge that isn't managed by libvirt). There is no
real reason for this difference, and as a matter of fact it
complicates things for qemu. Also, there is another bridge-related
attribute (macTableManager) that will need to be available in both
cases, so this makes things consistent.
In order to avoid problems when restarting libvirtd after an update
from an older version that *doesn't* store the network's bridgename in
the ActualNetDef, we also need to put it in place during
networkNotifyActualDevice() (this function is run for each interface
of each domain whenever libvirtd is restarted).
Along with making the bridge name available in the internal object, it
is also now reported in the <source> element of the <interface> state
XML (or the <actual> subelement in the internally-stored format).
The one oddity about this change is that usually there is a separate
union for every different "type" in a higher level object (e.g. in the
case of a virDomainNetDef there are separate "network" and "bridge"
members of the union that pivots on the type), but in this case
network and bridge types both have exactly the same attributes, so the
"bridge" member is used for both type==network and type==bridge.
The macTableManager attribute of a network's bridge subelement tells
libvirt how the bridge's MAC address table (used to determine the
egress port for packets) is managed. In the default mode, "kernel",
management is left to the kernel, which usually determines entries in
part by turning on promiscuous mode on all ports of the bridge,
flooding packets to all ports when the correct destination is unknown,
and adding/removing entries to the fdb as it sees incoming traffic
from particular MAC addresses. In "libvirt" mode, libvirt turns off
learning and flooding on all the bridge ports connected to guest
domain interfaces, and adds/removes entries according to the MAC
addresses in the domain interface configurations. A side effect of
turning off learning and unicast_flood on the ports of a bridge is
that (with Linux kernel 3.17 and newer), the kernel can automatically
turn off promiscuous mode on one or more of the bridge's ports
(usually only the one interface that is used to connect the bridge to
the physical network). The result is better performance (because
packets aren't being flooded to all ports, and can be dropped earlier
when they are of no interest) and slightly better security (a guest
can still send out packets with a spoofed source MAC address, but will
only receive traffic intended for the guest interface's configured MAC
address).
The attribute looks like this in the configuration:
<network>
<name>test</name>
<bridge name='br0' macTableManager='libvirt'/>
...
This patch only adds the config knob, documentation, and test
cases. The functionality behind this knob is added in later patches.
These two functions use netlink RTM_NEWNEIGH and RTM_DELNEIGH messages
to add and delete entries from a bridge's fdb. The bridge itself is
not referenced in the arguments to the functions, only the name of the
device that is attached to the bridge (since a device can only be
attached to one bridge at a time, and must be attached for this
function to make sense, the kernel easily infers which bridge's fdb is
being modified by looking at the device name/index).
I'm about to make block stats optionally more complex to cover
backing chains, where block.count will no longer equal the number
of <disks> for a domain. For these reasons, it is nicer if the
statistics output includes the source path (for local files).
This patch doesn't add anything for network disks, although we
may decide to add that later.
With this patch, I now see the following for the same domain as
in the previous patch (one qcow2 file, and an empty cdrom drive):
$ virsh domstats --block foo
Domain: 'foo'
block.count=2
block.0.name=hda
block.0.path=/var/lib/libvirt/images/foo.qcow2
block.1.name=hdc
* src/libvirt-domain.c (virConnectGetAllDomainStats): Document
new field.
* tools/virsh.pod (domstats): Document new field.
* src/qemu/qemu_driver.c (qemuDomainGetStatsBlock): Return the new
stat for local files/block devices.
(QEMU_ADD_NAME_PARAM): Add parameter.
(qemuDomainGetStatsInterface): Update caller.
Signed-off-by: Eric Blake <eblake@redhat.com>
I noticed that for an offline domain, 'virsh domstats --block $dom'
was producing just the domain name, with no stats. But the older
'virsh domblkinfo' works just fine on offline domains. This patch
starts to get us closer, by at least reporting the disk names for
an offline domain.
With this patch, I now see the following for an offline domain
with one qcow2 disk and an empty cdrom drive:
$ virsh domstats --block foo
Domain: 'foo'
block.count=2
block.0.name=hda
block.1.name=hdc
* src/qemu/qemu_driver.c (qemuDomainGetStatsBlock): Don't short-circuit
output of block name.
Signed-off-by: Eric Blake <eblake@redhat.com>
At least with 'virsh domstats --block' on an offline domain, we
currently output no stats even though we recognize the stat
category. Although a later patch will improve this situation,
it is better to document that this is expected behavior.
Also, while the current implementation rejects filtering flags
for virDomainListGetStats, this limitation may be lifted in the
future and we do not enforce it at the API level.
* src/libvirt-domain.c (virConnectGetAllDomainStats): Document
that recognized stats might not be reported.
(virDomainListGetStats): Likewise, and tweak filtering documentation.
Signed-off-by: Eric Blake <eblake@redhat.com>
qemuDomainGetStatsBlock() could leak a stats hash table if it
encountered OOM while populating the virTypedParameters.
Oddly, the fix doesn't even touch qemuDomainGetStatsBlock :)
* src/qemu/qemu_driver.c (QEMU_ADD_COUNT_PARAM)
(QEMU_ADD_NAME_PARAM): Don't return early.
(qemuDomainGetStatsInterface): Adjust caller.
Signed-off-by: Eric Blake <eblake@redhat.com>
Whenever client socket was marked as closed for some reason, it could've
been changed when really closing the connection. With this patch the
proper reason is kept since the first time it's marked as closed.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Each command that needs a connection causes a new connection to be
made. Reconnecting after a command failed is pointless, mainly when
there is no other command to run. Removeing three lines of code takes
care of that and keeps virsh working as it should.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add the optional adapter options for pool create/define. Results in
either:
<adapter type='scsi_host' name='scsi_host2'/>
or (on one line)
<adapter type='fc_host' parent='scsi_host5'
wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/>
being generated.
Add 3 new optional options for the pool-create-as and pool-define-as
command in order to define the 3 elements required in order to add
an auth element, such as:
<auth type='chap' username='myuser'>
<secret usage='libvirtiscsi'/>
</auth>
Fix format of the secret XML in the example. The XML had an extraneous
"type='iscsi'" (which is used by the <disk> definitions)
The world wide node name had a typo in the acronym (wwwn).
When user tries to insert element metadata providing a namespace
declaration as well, currently we insert the element without any validation
check for XML prefix (if provided). The next VM start would then
fail with parse error. This patch fixes this issue by adding a call to
xmlValidateNCName function to check for illegal characters in the
prefix.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1143921
If probing capabilities via QMP fails, we now have a check
that prevents us falling back to -help parsing. Unfortunately
the error message
"Failed to probe capabilities for /usr/bin/qemu-kvm:
unsupported configuration: QEMU 2.1.2 is too new for help parsing"
is proving rather unhelpful to the user. We need to be telling
them why QMP failed (the root cause), rather than they can't
use -help (the side effect).
To do this we should capture stderr during QMP probing, and
if -help parsing then sees a new QEMU version, we know that
QMP should have worked, and so we can show the messages from
stderr. The message thus becomes
"Failed to probe capabilities for /usr/bin/qemu-kvm:
internal error: QEMU / QMP failed: Could not access
KVM kernel module: No such file or directory
failed to initialize KVM: No such file or directory"
When attempting to create internal system checkpoint with a passthrough
device qemu will report the following error:
error: operation failed: Error -22 while writing VM
This patch calls the function to check if migration is possible with
given VM and thus improves the error to:
error: Requested operation is not valid: domain has assigned non-USB host devices
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=874418#c19
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1115292
In one of the previous commits (eafb53fe) we disallowed
network-wide bandwidth to some network types. However, we
forgot about <portgroups/> which can have <bandwidth/> too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The apibuild.py script did not handle whitespace in preprocessor
macros, so it failed to detect constants declared with '# define'
instead of '#define'. Since we now correctly indent our public
header files, we have silently lost all constants from
libvirt-api.xml. This also caused us to not detect formatting
errors in constant docs
Move entering the job into the thread to simplify the program flow. Also
as the code holds a separate reference to the domain object some
conditions can be simplified.
After this patch qemuDomainObjTransferJob is no longer needed so this
patch removes it.
When trying clang, it found out that we were comparing sizeof with 0
even though we wanted to check the return value of memcmp. That showed
us that the test was wrong and it needs a fix as well.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reboot requires more sophistication and is left as a future work item --
but at least part of the plumbing is in place.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If someone removes blockcopy storage file when still in mirroring phase
and then requesting blockjob abort using pivot, virsh cmd freezes. This
is not an issue with older qemu versions which did not support
asynchronous jobs (which we prefer by default).
As we have reached the mirroring phase successfully, polling monitor for
blockjob info always returns 1 and the loop never ends.
This fix introduces a check for qemuDomainBlockPivot return code, possibly
skipping the asynchronous waiting completely, if an error occurred and
asynchronous waiting was the preferred method.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1139567
