Move qemuGetProcessInfo and qemuGetSchedInfo methods to util and share them
with ch driver.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In a few places (e.g. device attach/detach/update) we are given a
device XML, parse it but then need a copy of parsed data so that
the original can be passed to function handling the request over
inactive XML and the copy is then passed to function handling the
operation over live XML. Note, both functions consume passed
device on success, hence the need for copy.
The problem is in combination of how the copy is obtained and
where is passed. The copy is done by calling
virDomainDeviceDefCopy() which does only inactive copy, i.e. no
live information is copied over (e.g. no aliases).
Then, this copy (inactive XML effectively) is passed to function
handling live part of the operation (e.g.
qemuDomainUpdateDeviceLive()) and the definition containing all
the juicy, live bits is passed to function handling inactive part
of the operation (e.g. qemuDomainUpdateDeviceConfig()).
This is rather incorrect, and XML copies should be passed to
their respective functions.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2036895
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Set a launch secret in guest memory using the sev-inject-launch-secret
QMP API. Only supported with qemu >= 6.0.0 and SEV-enabled guests in a
paused state.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The function was formatted weirdly which prompted additions to conform
to the unusual style.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Let's imagine a guest that's configured with strict numatune:
<numatune>
<memory mode='strict' nodeset='0'/>
</numatune>
For guests with NUMA:
Depending on machine type used (see commit v6.4.0-rc1~75) we
generate either:
1) -object '{"qom-type":"memory-backend-ram","id":"ram-node0",\
"size":20971520,"host-nodes":[0],"policy":"preferred"}' \
-numa node,nodeid=0,cpus=0,memdev=ram-node0
or
2) -numa node,nodeid=0,cpus=0,mem=20480
Later, when QEMU boots up and cpuset CGroup controller is
available we further restrict QEMU there too. But there's a
behaviour difference hidden: while in case 1) QEMU is restricted
from beginning, in case 2) it is not and thus it may happen that
it will allocate memory from different NUMA node and even though
CGroup will try to migrate it, it may fail to do so (e.g. because
memory is locked). Therefore, one can argue that case 2) is
broken. NB, case 2) is exactly what mode 'restrictive' is for.
However, in case 1) we are unable to update QEMU with new
host-nodes, simply because it's lacking a command to do so.
For guests without NUMA:
It's very close to case 2) from above. We have commit
v7.10.0-rc1~163 that prevents us from outputting host-nodes when
generating memory-backend-* for system memory, but that simply
allows QEMU to allocate memory anywhere and then relies on
CGroups to move it to desired location.
Due to all of this, there is no reliable way to change nodeset
for mode 'strict'. Let's forbid it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The whole idea of VIR_DOMAIN_NUMATUNE_MEM_RESTRICTIVE is that the
memory location is restricted only via CGroups and thus can be
changed on the fly (which is exactly what
qemuDomainSetNumaParamsLive() does. Allow this mode there then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
And its callers. The parameter is no longer used since virDomainObjSave
was replaced with qemuDomainSaveStatus wrapper.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Different CPU generations have different limits on the number
of SEV/SEV-ES guests that can be run. Since both limits come
from the same overall set, there is typically also BIOS config
to set the tradeoff betweeen SEV and SEV-ES guest limits.
This is important information to expose for a mgmt application
scheduling guests to hosts.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Report extra info about the SEV setup, returning those fields
that are required to calculate the expected launch measurement
HMAC(0x04 || API_MAJOR || API_MINOR || BUILD ||
GCTX.POLICY || GCTX.LD || MNONCE; GCTX.TIK)
specified in section 6.5.1 of AMD Secure Encrypted
Virtualization API.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Querying launch params on a inactive guest currently triggers
a warning about the monitor being NULL.
https://bugzilla.redhat.com/show_bug.cgi?id=2030437
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We have just one case when we wish to wait for incomming connections for
a listening socket and that is for vhost-user network devices.
Passing this via a flag to qemuBuildChrChardevStr is unwieldy. Add a
field to qemuDomainChrSourcePrivate and populate it for our special
case inside of qemuDomainPrepareChardevSourceOne.
Since we wait for incomming connections only on startup of a new VM we
also need to pass in a flag whether qemuDomainPrepareChardevSourceOne
is called on a new start or on hotplug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the qemuDomainDeviceBackendChardevForeach helper to iterate all
eligible structs and convert the setup of the TLS defaults from the
config.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This reverts commit 69977ff10560a80bcf5bf93f1a3f819a2d1623ca.
After previous commit it's no longer possible that QEMU driver is
not initialized in qemuStateShutdownPrepare() nor
qemuStateShutdownWait().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Wire up the flag to enable the 'write-blocking' 'copy-mode' of
'blockdev-mirror'.
It's not supported by all qemu versions but it is with those which we
use -blockdev with so we can use that instead of adding another custom
capability as we use blockdev for some time now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Forces the data to be written synchronously to both the original and the
mirrored images which ensures that the job will reach synchronized
phase.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In qemuConnectGetAllDomainStats() there a loop that iterates over
all domains that stats are to be fetched for. Within this loop
the qemuDomainGetStats() is called which is responsible for
fetching stats for an individual domain. Now, the code that
handles successful and failure cases is almost the same. Rework
it, so that the code is deduplicated. Note, that the check for
!tmp is dropped because upon successful return from
qemuDomainGetStats() it is always allocated.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since f29d7c3e698 we have an option for checking capabilities
required for given type of statistics upfront, instead of the
callback. Switch qemuDomainGetStatsIOThread() callback to the new
style.
This will now error out properly if user requests IOTHREAD stats
forcibly (via VIR_CONNECT_GET_ALL_DOMAINS_STATS_ENFORCE_STATS
flag) but QEMU doesn't support IOThreads. Previously, this was
silently ignored.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The idea of queryDirtyRateRequired[] is that it lists QEMU
capabilities required for given domstats record
(VIR_DOMAIN_STATS_DIRTYRATE in this particular case) and
QEMU_CAPS_LAST is used as a sentinel. Therefore, there can never
be anything after it. Drop the comma to make it more obvious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use 'g_clear_pointer(&ptr, g_hash_table_unref)' instead.
In few instances it allows us to also remove explicit clearing of
pointers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
No need for the cleanup section once we switch to g_autoptr.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Remove the check from conditions where it's coupled with some other
checks.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I have seen this pattern a lot in the project, so I decided to
rewrite code I stumbled upon to the same pattern as well.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I think it makes no sense to have else branches after return or
goto as it will never reach them in cases it should not. This
patch makes the code more readable (at least to me).
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Upon successful return from virDomainObjListAdd() the
virDomainObj is the owner of secret definition. To make this
ownership transfer even more visible, lets pass the definition as
a double pointer and use g_steal_pointer().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This patch removes variables such as 'ret', 'rc' and others which
are easily replaced. Therefore, making the code look cleaner and
easier to understand.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This eliminates one incorrect parsing implementation which relied on the
command field not having a closing bracket. This possibility is already
tested against in the virProcessGetStat() tests.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previous commit rendered 'cleanup' label and @ret variable
redundant. The same result can be achieved by returning 0/-1
directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There are two instances of an explicit call to
qemuMonitorCPUModelInfoFree() which in fact can be turned into
g_auto().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There are a few cases where a string list is freed by an explicit
call of g_strfreev(), but the same result can be achieved by
g_atuo(GStrv).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Support return guest interface information from guest agent
Signed-off-by: zhanglei <zhanglei@smartx.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add stat entries also for the mirror destination and the backup job
scratch/target file. This is possible with '-blockdev' as we use unique
index for the entries.
The stats are reported when the VIR_CONNECT_GET_ALL_DOMAINS_STATS_BACKING
is used.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2017928
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It may happen that qemuProcessStop() is called from "qemu-event"
thread. But this thread doesn't have any virIdentity set
(virIdentity being thread local) and therefore it may be unable
to open connection to secondary drivers. It is unable to do so
in split daemon scenario, because in there opening a connection
is coupled with copying current thread identity onto the
connection. Code-wise, virIdentityGetCurrent() returns NULL which
in turn makes virGetConnectGeneric() fail. This problem does not
occur in monolithic daemon scenario, because no identity copying
is done there.
Long story short, inability to open secondary driver connection
can lead to unwanted results. Therefore, do what
qemuProcessReconnectHelper() does - set the new thread identity
to be the one of the caller.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2013573
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In some cases the worker func running inside the pool may rely on
virIdentity. While worker func could check for identity and set
one it is not optimal - it may not have access to the identity of
the thread creating the pool and thus would have to call
virIdentityGetSystem(). Allow passing identity when creating the
pool.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Always fetch the stats for all backing chain members. Callers from
qemu_driver.c already always passed 'true' and the caller from the
migration code won't mind when we fetch all stats.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All (proper) callers pass true so we can remove the argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory clearing for the temporary variables and remove the
cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Similarly to the fix to 'qemuDomainBlocksStatsGather' we should be
always fetching the full backing chain so that we can avoid any
automatic filter notes which would prevent us from fetching the stats
for the correct nodename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In certain cases such as when running a backup blockjob qemu installs a
filter node between the frontend and the top node of the backend of the
disk. The stats gathering code didn't instruct the monitor code to fetch
the stats for all the layers, so since the top layer now doesn't have
stats we were reporting wrong stats such as allocation.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2015281
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are two variables (@vm and @domflags) in qemuConnectGetAllDomainStats()
that are used only within the for() loop but declared for entire function.
Bring them into the loop to make it obvious they are not used outside of it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
query-dirty-rate command is used for virsh domstats by default, but this
is available only on qemu >=5.2.0.
By this commit, qemu domain stats will check capabilities requirements before issuing actual query.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
One of qemuDomainGetStatsWorkers requires capabilities to run.
This commit adds capability information to qemuDomainGetStatsWorkers.
Signed-off-by: Hiroki Narukawa <hnarukaw@yahoo-corp.jp>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The -netdev formatter code switched to a real virQEMUCaps flag so we can
remove the old flags which used to enable JSON for -netdev for
validation purposes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
