Commit f5e8715a8b4 added logic which adds some fake job info when qemu
didn't return anything but in such case the job type would not be set.
Since we already have the proper job type recorded in qemuBlockJobDataPtr
which the caller fetched, we can use this it and also remove the lookup
from the disk which was necessary prior to the conversion to
qemuBlockJobDataPtr.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Nodename may be asociated to a disk backup job, add support to looking
up in that chain too. This is specifically useful for the
BLOCK_WRITE_THRESHOLD event which can be registered for any nodename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In v6.0.0-rc1~439 (and friends) we tried to cache NUMA
capabilities because we assumed they are immutable. And to some
extent they are (NUMA hotplug is not a thing, is it). However,
our capabilities contain also some runtime info that can change,
e.g. hugepages pool allocation sizes or total amount of memory
per node (host side memory hotplug might change the value).
Because of the caching we might not be reporting the correct
runtime info in 'virsh capabilities'.
The NUMA caps are used in three places:
1) 'virsh capabilities'
2) domain startup, when parsing numad reply
3) parsing domain private data XML
In cases 2) and 3) we need NUMA caps to construct list of
physical CPUs that belong to NUMA nodes from numad reply. And
while this may seem static, it's not really because of possible
CPU hotplug on physical host.
There are two possible approaches:
1) build a validation mechanism that would invalidate the
cached NUMA caps, or
2) drop the caching and construct NUMA caps from scratch on
each use.
In this commit, the latter approach is implemented, because it's
easier.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1819058
Fixes: 1a1d848694f6c2f1d98a371124928375bc3bb4a3
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If the job has finished, but we didn't yet process the completion fake
that it's still incomplete so that apps which decided to poll
qemuDomainGetBlockJobInfo rather than use events can be sure that the
XML update was completed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Replace qemuMonitorGetBlockJobInfo by qemuMonitorGetAllBlockJobInfo and
hash table lookup. This basically open-codes qemuMonitorGetBlockJobInfo,
but it will be removed in next patch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Let's pass along / fill @niothreads rather than trying to make dual
use as a return value and thread count.
This resolves a Coverity issue detected in qemuDomainGetIOThreadsMon
where if qemuDomainObjExitMonitor failed, then a -1 was returned and
overwrite @niothreads causing a memory leak.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Existing practice with the filesystem fields reported for the
virDomainGetGuestInfo API is to use the singular form for
field names. Ensure the disk info follows this practice.
Fixes
commit 05a75ca2ce743bc0bb119fb8d532ff84646fafa3
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Fri Nov 20 22:09:46 2020 +0400
domain: add disk informations to virDomainGetGuestInfo
commit 0cb2d9f05d00497a715352f6ea28cf8fb6921731
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Fri Nov 20 22:09:47 2020 +0400
qemu_driver: report guest disk informations
commit 172b8304352b1945e328394e61290a24446280dd
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Fri Nov 20 22:09:48 2020 +0400
virsh: add --disk informations to guestinfo command
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If there is an error getting info from guest agent, then the
control on qemuDomainGetGuestInfo() jumps onto 'exitagent' label
and subsequently continues on 'endagentjob'. Both labels are hit
also in success case too. The control then continues by
attempting to match fetched info (e.g. disk addresses) with
domain def. But this is needless - the API will return error
regardless.
To return early from the function move both 'exitagent' and
'endagentjob' labels at the end of the function and jump straight
onto 'cleanup' afterwards. This allows us to set 'ret = 0' later
- only when we know we succeeded.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
To match the QGA schema name (we are introducing a qemuAgentDiskInfo
struct again for different purpose).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
When executing the hypervisor-cpu-baseline command and if there is
only a single CPU definition present in the XML file, then the
baseline handler will exit early and libvirt will print an unhelpful
message:
"error: An error occurred, but the cause is unknown"
This is due to no CPU definition ever being "baselined", since the
handler expects at least two CPU models.
Let's fix this by performing a CPU model expansion on the single CPU
definition and returning the result to the caller. This will also
ensure the CPU model's feature set is sane if any were provided in
the file.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Check the provided CPU models against the CPU models
known by the hypervisor before baselining and print
an error if an unrecognized model is found.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When executing the hypervisor-cpu-baseline command and the
XML file contains a CPU definition without a model name, or
an invalid CPU definition, then the commands will fail and
return an error message from the QMP response.
Let's clean this up by checking for a valid definition and
presence of a model name.
This code is copied from virCPUBaseline.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Hypervisor-cpu-baseline requires the cpu-model-expansion
capability when expanding CPU model features if the
--features flag is provided.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When introducing the API I've mistakenly used 'int' type for
@nkeys argument which does nothing more than tells the API how
many items there are in @keys array. Obviously, negative values
are not expected and therefore 'unsigned int' should have been
used.
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A bad merge while rebasing 74b2834333a caused the @event variable
to be defined twice, inside the 'cleanup' label, causing coverity
errors.
This code was originally moved outside of the label by commit
773c7c43611a. Delete the unintended code in the 'cleanup'
label.
Fixes: 74b2834333ab3bf500f870e0a6d4e8309379d96a
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some labels became deprecated after the previous patches.
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Due to failures to unlink on previous rename/undefine we can already have
autolink etc files for the domain to be defined. Remove them.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Let's move objlist restoring to cleanup section so that we can handle failure
of actions between virDomainObjListAdd and virDomainDefSave. We are going
to add such actions in next patch.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is basically just saves checkpoints metadata on disk after name is changed
in memory as path to domain checkpoints directory depends on name. After that
old checkpoint directory is deleted with checkpoint metadata files.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is basically just saves snapshots metadata on disk after name is changed
in memory as path to domain snapshot directory depends on name. After that
old snapshot directory is deleted with snapshot metadata files.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch also changes functionality a bit.
First if unlinking of old config file is failed we rollback and return error
previously and now we return success. I don't think this makes much difference.
I guess in both cases on libvirtd restart we have to deal with both new and old
config existing on disk with different names but same uuid.
Second if unlinking of old autolink is failed we rollback previously which
was not right as at this point we already unlink old config file. So this
is fixed now.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Going to cleanup label is mere return -1 thus let's just return
instead of goto to this label.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We can simplify cleanup section by moving sending events to success path only
because only on sucess path events are not NULL.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
For example if saving config file with new name fails we send false undefine
event currently.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Don't hide our use of GHashTable behind our typedef. This will also
promote the use of glibs hash function directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
All of these conversions are trivial - VIR_DIR_CLOSE() (aka
virDirClose()) is called only once on the DIR*, and it happens just
before going out of scope.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
It doesn't make much sense to configure the bucket count in the hash
table for each case specifically. Replace all calls of virHashCreate
with virHashNew which has a pre-set size and remove virHashCreate
completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use of the -enable-fips option is being deprecated in QEMU >= 5.2.0. If
FIPS compliance is required, QEMU must be built with libcrypt which will
unconditionally enforce it.
Thus there is no need for libvirt to pass -enable-fips to modern QEMU.
Unfortunately there was never any way to probe for -enable-fips in the
first instance, it was enabled by libvirt based on version number
originally, and then later unconditionally enabled when libvirt dropped
support for older QEMU. Similarly we now use a version number check to
decide when to stop passing -enable-fips.
Note that the qemu-5.2 capabilities are currently from the pre-release
version and will be updated once qemu-5.2 is released.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
libvirt can retrieve traffic stats for emulated interfaces that are
backed by tap or macvtap devices, but this information wasn't
available for hostdev interfaces (those that are implemented by
assigning an SR-IOV VF device to a guest using vfio):
#virsh domifstat instance --interface=52:54:00:2d:b2:35
error: Failed to get interface stats instance 52:54:00:2d:b2:35
error: internal error: Interface name not provided
For some SR-IOV VF devices this information is available via the
netlink VFINFO_LIST request/response, and that is what this patch uses
to implement stats retrieval for VF. Not that this is dependent on
support in the PF driver - for example, the Mellanox ConnectX-4 Lx
(mlx5) driver reports usable stats, while Intel 82599 (ixgbe) and
82576 (igb) just report all stats as 0. (this is the same result as
"ip -s link show").
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Laine Stump <laine@redhat.com>
SCSI hostdev setup requires querying the host os for the actual path of
the configured hostdev. This was historically done in the command line
formatter. Our new approach is to split out this part into
'qemuProcessPrepareHost' which is designed to be skipped in tests.
Refactor the hostdev code to use this new semantics, and add appropriate
handlers filling in the data for tests and the qemuConnectDomainXMLToNative
users.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Host preparation steps which are deliberately skipped when
pretend-creating a commandline are normally executed after VM object
preparation. In the test code we are faking some of the host
preparation steps, but we were doing that prior to the call to
qemuProcessPrepareDomain embedded in qemuProcessCreatePretendCmd.
By splitting up qemuProcessCreatePretendCmd into two functions we can
ensure that the ordering of the prepare steps stays consistent.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As preparation for g_autoptr() we need to change the function to take
only virCgroupPtr.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
This adds a new value to virConnectCompareCPUFlags,
"VIR_CONNECT_CPU_VALIDATE_XML", that governs XML document validation in
virCPUDefParseXML.
In src/conf/cpu_conf.c, include configmake.h for PKGDATADIR and
virfile.h for virFileFindResource.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
