The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in network_conf.{h,c} and update all callers to
match
The QEMU flags are commonly stored as a signed or unsigned int,
allowing only 31 flags. This limit is rather close, so to aid
future patches, change it to a 64-bit int
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c,
tests/qemuargv2xmltest.c, tests/qemuhelptest.c, tests/qemuxml2argvtest.c:
Use 'unsigned long long' for QEMU flags
To allow devices to be hot(un-)plugged it is neccessary to ensure
they all have a unique device aliases. This fixes the hotplug
methods to assign device aliases before invoking the monitor
commands which need them
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Expose methods
for assigning device aliases for disks, host devices and
controllers
* src/qemu/qemu_driver.c: Assign device aliases when hotplugging
all types of device
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address-device.args,
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address-device.args:
Update for changed hostdev naming scheme
The current way of assigning names to the host network backend and
NIC device in QEMU was over complicated, by varying naming scheme
based on the NIC model and backend type. This simplifies the naming
to simply be 'net0' and 'hostnet0', allowing code to easily determine
the host network name and vlan based off the primary device alias
name 'net0'. This in turn allows removal of alot of QEMU specific
code from the XML parser, and makes it easier to assign new unique
names for NICs that are hotplugged
* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove hostnet_name
and vlan fields from virNetworkDefPtr
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c:
Use a single network alias naming scheme regardless of NIC type
or backend type. Determine VLANs from the alias name.
* tests/qemuxml2argvdata/qemuxml2argv-net-eth-names.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-device.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args: Update
for new simpler naming scheme
The QEMU 0.12.x tree has the -netdev command line argument, but not
corresponding monitor command. We can't enable the former, without
the latter since it will break hotplug/unplug.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Disable -netdev usage
until 0.13 at earliest
* tests/qemuxml2argvtest.c: Add test for -netdev syntax
* tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.xml: Test
data files for -netdev syntax
The current QEMU code allocates PCI addresses incrementally starting
at 4. This is not satisfactory because the user may have given some
addresses in their XML config, which need to be skipped over when
allocating addresses to remaining devices.
It is thus neccessary to maintain a list of already allocated PCI
addresses and then only allocate ones that remain unused. This is
also required for domain device hotplug to work properly later.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add APIs for creating
list of existing PCI addresses, and allocating new addresses.
Refactor address assignment to use this code
* src/qemu/qemu_driver.c: Pull PCI address assignment up into the
qemuStartVMDaemon() method, as a prelude to moving it into the
'define' method. Update list of allocated addresses when connecting
to a running VM at daemon startup.
* tests/qemuxml2argvtest.c, tests/qemuargv2xmltest.c,
tests/qemuxml2xmltest.c: Remove USB product test since all
passthrough is done based on address
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.args,
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml: Kil
unused data files
The test expected all environment variables copied in qemudBuildCommandLine
to have known values. So all of them have to be either set to a known value
or be unset. SDL_VIDEODRIVER and QEMU_AUDIO_DRV are not handled at all but
should be handled. Unset both, otherwise the test will fail if they are set
in the testing environment.
* src/qemu/qemu_conf.c: add a comment about copied environment variables
and qemuxml2argvtest
* tests/qemuxml2argvtest.c: unset SDL_VIDEODRIVER and QEMU_AUDIO_DRV
The RNG now supports IPv6 and bonds attached to bridges, along with
some other minor tweaks. All test files from netcf have been copied to
the test directory and added to the xml2xml and schema tests (and they
all pass, of course ;-)
QEMU's command line equivalent for the following domain XML fragment
<vcpus>2</vcpus>
<cpu ...>
...
<topology sockets='1' cores='2', threads='1'/>
</cpu>
is
-smp 2,sockets=1,cores=2,threads=1
This syntax was introduced in QEMU-0.12.
Version 2 changes:
- -smp argument build split into a separate function
- always add ",sockets=S,cores=C,threads=T" to -smp if qemu supports it
- use qemuParseCommandLineKeywords for command line parsing
Version 3 changes:
- ADD_ARG_LIT => ADD_ARG and line reordering in qemudBuildCommandLine
- rebased
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Replace
-balloon virtio
With
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
This allows it to get correct assigned PCI address as declared in
previous patch
* src/qemu/qemu_conf.c: Convert Virtio ballon to -device and
give it an explicit PCI address
* tests/qemuxml2argvdata/qemuxml2argv-*args: Add in virtio balloon
where appropriate
Instead of relying on QEMU to assign PCI addresses and then querying
them with 'info pci', manually assign all PCI addresses before starting
the guest. These addresses are not stable across reboots. That will
come in a later patch
NB, the PIIX3 (IDE, FDC, ISA-Bridge) will always have slot 1 and
VGA will always have slot 2. We declare the Virtio Balloon gets
slot 3, and then all remaining slots are for configured devices.
* src/qemu/qemu_conf.c: If -device is supported, then assign all PCI
addresses when building the command line
* src/qemu/qemu_driver.c: Don't query monitor for PCI addresses if
they have already been assigned
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address-device.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-device.args,
tests/qemuxml2argvdata/qemuxml2argv-sound-device.args,
tests/qemuxml2argvdata/qemuxml2argv-watchdog-device.args: Update
to include PCI slot/bus information
QEMU always configures a VGA card. If no video card is included in
the libvirt XML, it is neccessary to explicitly turn off the default
using -vga none
* src/qemu/qemu_conf.c: Pass -vga none if no video card is configured
* tests/qemuargv2xmltest.c, tests/qemuxml2argvtest.c: Test for
handling -vga none.
* tests/qemuxml2argvdata/qemuxml2argv-nographics-vga.args,
tests/qemuxml2argvdata/qemuxml2argv-nographics-vga.xml: Test
data files
Not all QEMU builds default to SDL graphics for their display.
Newer QEMU now has an explicit -sdl flag, which we can use to
explicitly request SDL intead of relying on the default. This
protects libvirt against unexpected changes in graphics default
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Probe for -sdl
flag and use it if it is found
* tests/qemuhelptest.c: Add SDL flag to tests
The old syntax was
-chardev SOMECONFIG
-nic user,guestfwd=tcp:IP:PORT-chardev:CHARDEV
The new syntax is
-chardev SOMECONFIG
-netdev user,guestfwd=tcp:IP:PORT,chardev=ID,id=user-ID
The old syntax was
-usbdevice host:PRODUCT:VENDOR
Or
-usbdevice host:BUS.DEV
The new syntax is
-device usb-host,product=PRODUCT,vendor=VENDOR
Or
-device usb-host,hostbus=BUS,hostaddr=DEV
The previous syntax was severely limited in its options
-usbdevice disk:/home/berrange/output.img
The new syntax is the same as for other disk types
-drive file=/home/berrange/output.img,if=none,id=usb-1,index=1
-device usb-storage,drive=usb-1
Again, the index= arg is wrong here, and will be removed in a
later merge
The current syntax uses a pair of args
-net nic,macaddr=52:54:00:56:6c:55,vlan=3,model=pcnet,name=pcnet.0
-net user,vlan=3,name=user.0
The new syntax does not need the vlan craziness anymore, and
so has a simplified pair of args
-netdev user,id=user.0
-device pcnet,netdev=user.0,id=pcnet.0,mac=52:54:00:56:6c:55,addr=<PCI SLOT>
The current syntax for audio devices is a horrible multiplexed
arg
-soundhw sb16,pcspk,ac97
The new syntax is
-device sb16,id=sound0
or
-device AC97,id=sound1,addr=<PCI SLOT>
NB, pcspk still uses the old -soundhw syntax
The current character device syntax uses either
-serial tty,path=/dev/ttyS2
Or
-chardev tty,id=serial0,path=/dev/ttyS2 -serial chardev:serial0
With the new -device support, we now prefer
-chardev file,id=serial0,path=/tmp/serial.log -device isa-serial,chardev=serial0
This patch changes the existing -chardev syntax to use this new
scheme, and fallbacks to the old plain -serial syntax for old
QEMU.
The monitor device changes to
-chardev socket,id=monitor,path=/tmp/test-monitor,server,nowait -mon chardev=monitor
In addition, this patch adds --nodefaults, which kills off the
default serial, parallel, vga and nic devices. THis avoids the
need for us to explicitly turn each off
Probe for the new -device flag and if available set the -nodefaults
flag, instead of using -net none, -serial none or -parallel none.
Other device types will be converted to use -device in later patches.
The -nodefaults flag will help avoid unwelcome surprises from future
QEMU releases
* src/qemu/qemu_conf.c: Probe for -device. Add -nodefaults flag.
Remove -net none, -serial none or -parallel none
* src/qemu/qemu_conf.h: Define QEMU_CMD_FLAG_DEVICE
* tests/qemuhelpdata/qemu-0.12.1: New data file for 0.12.1 QEMU
* tests/qemuhelptest.c: Test feature extraction from 0.12.1 QEMU
Existing applications using libvirt are not aware of the disk
controller concept. Thus, after parsing the <disk> definitions
in the XML, it is neccessary to create <controller> elements
to satisfy all requested disks, as per their defined drive
addresses
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/libvirt_private.syms: Add virDomainDefAddDiskControllers()
method for populating disk controllers, and call it after
parsing disk definitions.
* src/qemu/qemu_conf.c: Call virDomainDefAddDiskControllers()
when doing ARGV -> XML conversion
* tests/qemuxml2argvdata/qemuxml2argv*.xml: Add disk controller
data to all data files which don't have it already
It is perfectly acceptable to have multiple sound devices of
same type in guest configuration. If the underlying hypervisor
does not like this, it is its job to complain, not the XML
parser's
* src/conf/domain_conf.c: Remove hack which deleted duplicated
sound device models.
* tests/xml2sexprdata/xml2sexpr-fv-sound.xml: Remove duplicate
models
The latter is not officially "wrong", but *is* terribly anachronistic.
I think automake documentation or comments call that syntax obsolescent.
* cfg.mk (_makefile_at_at_check_exceptions): Exempt @SCHEMADIR@
and @SYSCONFDIR@ uses -- there are no Makefile variables for those.
* docs/Makefile.am: Use $(INSTALL), not @INSTALL@.
* examples/dominfo/Makefile.am: Similar.
* examples/domsuspend/Makefile.am: Similar.
* proxy/Makefile.am: Similar.
* python/Makefile.am: Similar.
* python/tests/Makefile.am: Similar.
* src/Makefile.am: Similar.
* tests/Makefile.am: Similar.
* src/conf/domain_conf.c: add defaults for the video device
* src/esx/esx_vmx.[ch]: add VNC support to the VMX handling
* tests/vmx2xmltest.c, tests/xml2vmxtest.c: add tests for the VNC support
The current code for using -drive simply sets the -drive 'index'
parameter. QEMU internally converts this to bus/unit depending
on the type of drive. This does not give us precise control over
the bus/unit assignment though. This change switches over to make
libvirt explicitly calculate the bus/unit number.
In addition bus/unit/index are actually irrelevant for VirtIO
disks, since each virtio disk is a separate PCI device. No disk
controller is involved.
Doing the conversion to bus/unit in libvirt allows us to correctly
attach SCSI controllers when required.
* src/qemu/qemu_conf.c: Specify bus/unit instead of index for
disks
* tests/qemuxml2argvdata/qemuxml2argv-disk*.args: Switch over from
using index=NNNN, to bus=NN, unit=NN for SCSI/IDE/Floppy disks
When parsing the <disk> element specification, if no <address>
is provided for the disk, then automatically assign one based on
the <target dev='sdXX'/> device name. This provides for backwards
compatability with existing applications using libvirt, while also
allowing new apps to have complete fine grained control.
* src/conf/domain_conf.h, src/conf/domain_conf.c,
src/libvirt_private.syms: Add virDomainDiskDefAssignAddress()
for assigning a controller/bus/unit address based on disk target
* src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after
generating XML from ARGV
* tests/qemuxml2argvdata/*.xml: Add in drive address information
to all XML files
Only print out '.' for each test case, full test output can be
re-enabled with VIR_TEST_VERBOSE=1, or VIR_TEST_DEBUG=XXXX
Sample output now looks like
TEST: statstest
........................................ 40
................................... 75 OK
PASS: statstest
TEST: qparamtest
................................ 32 OK
PASS: qparamtest
TEST:
............ 12 OK
The MAC addresses with 00:50:56 prefix are split into several ranges:
00:50:56:00:00:00 - 00:50:56:3f:ff:ff 'static' range (manually assigned)
00:50:56:80:00:00 - 00:50:56:bf:ff:ff 'vpx' range (assigned by a VI Client)
Erroneously the 'vpx' range was assumed to be larger and to occupy the
remaining addresses of the 00:50:56 prefix that are not part of the 'static'
range.
00:50:56 was used as prefix for generated MAC addresses, this is not possible
anymore, because there are gaps in the allowed ranges. Therefore, change the
prefix to 00:0c:29 which is the prefix for auto generated MAC addresses anyway.
Allow arbitrary MAC addresses to be used and set the checkMACAddress VMX option
to false in case the MAC address doesn't fall into any predefined range.
* docs/drvesx.html.in: update website accordingly
* src/esx/esx_driver.c: set the auto generation prefix to 00:0c:29
* src/esx/esx_vmx.c: fix MAC address range handling and allow arbitrary MAC
addresses
* tests/vmx2xml*, tests/xml2vmx*: add some basic MAC address range tests
The behavior for the qemu balloon device has changed. Formerly, a virtio
balloon device was provided by default. Now, '-balloon virtio' must be
specified on the command line to enable it. This patch causes libvirt to
add '-balloon virtio' to the command line whenever the -balloon option is
available.
* src/qemu/qemu_conf.c src/qemu/qemu_conf.h: check for the new flag and
add "-baloon vitio" to qemu command when needed
* tests/qemuhelptest.c: add the new flag for detection
tests/virt-aa-helper-test and examples/apparmor are not included in
official tarballs, but should be. Attached is a patch to fix that
which works when apparmor is and is not available.
Change -monitor, -serial and -parallel output to use -chardev if it is
available.
* src/qemu/qemu_conf.c: Update qemudBuildCommandLine to use -chardev where
available.
* tests/qemuxml2argvtest.c tests/qemuxml2argvdata/: Add -chardev equivalents
for all current serial and parallel tests.
Initial support for the new QEMU monitor protocol using JSON
as the data encoding format instead of plain text
* po/POTFILES.in: Add src/qemu/qemu_monitor_json.c
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Hack to turn on QMP
mode. Replace with a version number check on >= 0.12 later
* src/qemu/qemu_monitor.c: Delegate to json monitor if enabled
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
impl of QMP protocol
* src/Makefile.am: Add src/qemu/qemu_monitor_json.{c,h}
esxVMX_IndexToDiskName handles indices up to 701. This limit comes
from a mapping gap in virDiskNameToIndex:
sdzy -> 700
sdzz -> 701
sdaaa -> 728
sdaab -> 729
This line in virDiskNameToIndex causes this gap:
idx = (idx + i) * 26;
Fixing it by altering this line to:
idx = (idx + (i < 1 ? 0 : 1)) * 26;
Also add a new version of virIndexToDiskName that handles the inverse
mapping for arbitrary indices.
* src/esx/esx_vmx.[ch]: remove esxVMX_IndexToDiskName
* src/util/util.[ch]: add virIndexToDiskName and fix mapping gap
* tests/esxutilstest.c: update test to verify that the gap is fixed
Introduce a new type="dir" mode for <disks> that allows use of
QEMU's virtual FAT block device driver. eg
<disk type='dir' device='floppy'>
<source dir='/tmp/test'/>
<target dev='fda' bus='fdc'/>
<readonly/>
</disk>
gets turned into
-drive file=fat:floppy:/tmp/test,if=floppy,index=0
Only read-only disks are supported with virtual FAT mode
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add type="dir"
* docs/schemas/domain.rng: Document new disk type
* src/xen/xend_internal.c, src/xen/xm_internal.c: Raise error for
unsupported disk types
* tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom-empty.args: Fix
empty disk file handling
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.args,
tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.xml,
tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.args,
tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.xml
tests/qemuxml2argvtest.c: Test QEMU vitual FAT driver
* src/qemu/qemu_conf.c: Support generating fat:/some/dir type
disk args
* src/security/security_selinux.c: Temporarily skip labelling
of directory based disks
Recent qemu releases require command option '-enable-qemu' in order
for the kvm functionality be activated. Libvirt needs to pass this flag
to qemu when starting a domain. Note that without the option,
even if both the kernel and qemu support KVM, KVM will not be activated
and VMs will be very slow.
* src/qemu/qemu_conf.h src/qemu/qemu_conf.c: parse the extra command
line option from help and add it when running kvm
* tests/qemuhelptest.c: this modified the flags output for qemu-0.10.5
and qemu-kvm-0.11.0-rc2 regression tests
VMware uses two MAC address prefixes: 00:0c:29 and 00:50:56. The 00:0c:29
prefix is used for ESX server generated addresses. The 00:50:56 prefix is
split into two parts. MAC addresses above 00:50:56:3f:ff:ff are generated
by a vCenter. The rest of the 00:50:56 prefix can be assigned manually.
Any MAC address within the 00:0c:29 and 00:50:56 prefix can be specified
in a domain XML config and the driver will handle the details internally.
* src/esx/esx_vmx.c: fix MAC address formatting
* tests/xml2vmxdata/*: update test files accordingly
* src/security/virt-aa-helper.c: get_definition() now calls the new
caps_mockup() function which will parse the XML for os.type,
os.type.arch and then sets the wordsize. These attributes are needed
only to get a valid virCapsPtr for virDomainDefParseString(). The -H
and -b options are now removed from virt-aa-helper (they weren't used
yet anyway).
* tests/virt-aa-helper-test: extend and fixes tests, chmod'ed 755
allows the following to be specified in a domain:
<channel type='pipe'>
<source path='/tmp/guestfwd'/>
<target type='guestfwd' address='10.0.2.1' port='4600'/>
</channel>
* proxy/Makefile.am: add network.c as dep of domain_conf.c
* docs/schemas/domain.rng src/conf/domain_conf.[ch]: extend the domain
schemas and the parsing/serialization side for the new construct
QEmu support will add the following on the qemu command line:
-chardev pipe,id=channel0,path=/tmp/guestfwd
-net user,guestfwd=tcp:10.0.2.1:4600-chardev:channel0
* src/qemu/qemu_conf.c: Add argument output for channel
* tests/qemuxml2(argv|xml)test.c: Add test for <channel> domain syntax
- Don't duplicate SystemError
- Use proper error code in domain_conf
- Fix a broken error call in qemu_conf
- Don't use VIR_ERR_ERROR in security driver (isn't a valid code in this case)
Nearly all of the methods in src/util/util.h have error codes that
must be checked by the caller to correct detect & report failure.
Add ATTRIBUTE_RETURN_CHECK to ensure compile time validation of
this
* daemon/libvirtd.c: Add explicit check on return value of virAsprintf
* src/conf/domain_conf.c: Add missing check on virParseMacAddr return
value status & report error
* src/network/bridge_driver.c: Add missing OOM check on virAsprintf
and report error
* src/qemu/qemu_conf.c: Add missing check on virParseMacAddr return
value status & report error
* src/security/security_selinux.c: Remove call to virRandomInitialize
that's done in libvirt.c already
* src/storage/storage_backend_logical.c: Add check & log on virRun
return status
* src/util/util.c: Add missing checks on virAsprintf/Run status
* src/util/util.h: Annotate all methods with ATTRIBUTE_RETURN_CHECK
if they return an error status code
* src/vbox/vbox_tmpl.c: Add missing check on virParseMacAddr
* src/xen/xm_internal.c: Add missing checks on virAsprintf
* tests/qemuargv2xmltest.c: Remove bogus call to virRandomInitialize()
This patch adds an optional attribute to the <bootp> tag, that
allows to specify a TFTP server address other than the address of
the DHCP server itself.
This can be used to forward the BOOTP settings of the host down to the
guest. This is something that configurations such as Xen's default
network achieve naturally, but must be done manually for NAT.
* docs/formatnetwork.html.in: Document new attribute.
* docs/schemas/network.rng: Add it to schema.
* src/conf/network_conf.h: Add it to struct.
* src/conf/network_conf.c: Add it to parser and pretty printer.
* src/network/bridge_driver.c: Put it in the dnsmasq command line.
* tests/networkxml2xmlin/netboot-proxy-network.xml
tests/networkxml2xmlout/netboot-proxy-network.xml
tests/networkxml2xmltest.c: add new tests
Provide a simple interface for other tests to lookup the testDebug variable.
Also remove a redundant error message in interface tests.
If anyone feels inclined to change this env variable to match the existing
LIBVIRT_* format, it should now be easier to do so.
If one has e.g.
<guest>
<os_type>hvm</os_type>
<arch name='x86_64'>
<wordsize>64</wordsize>
<emulator>/usr/bin/qemu-system-x86_64</emulator>
<machine>pc-0.11</machine>
<machine canonical='pc-0.11'>pc</machine>
<machine>pc-0.10</machine>
<machine>isapc</machine>
<domain type='qemu'>
</domain>
<domain type='kvm'>
<emulator>/usr/bin/kvm</emulator>
<machine>pc</machine>
<machine>isapc</machine>
</domain>
</arch>
</guest>
and start a guest with:
<domain type='kvm'>
...
<os>
<type arch='x86_64'>hvm</type>
...
</os>
</domain>
then the default machine type should be 'pc' and not 'pc-0.11'
Issue was reported by Anton Protopopov.
* src/capabilities.[ch]: pass the domain type to
virCapabilitiesDefaultGuestArch() and use it to look up the default
machine type from a specific guest domain if needed.
* src/conf/domain_conf.c, src/xen/xm_internal.c: update
* tests/qemuxml2argvdata/qemuxml2argv-machine-aliases2.xml: update
the domain type to 'kvm' and remove the machine type to check
that the default gets looked up correctly
* configure.in: look for AppArmor and devel
* src/security/security_apparmor.[ch] src/security/security_driver.c
src/Makefile.am: add and plug the new driver
* src/security/virt-aa-helper.c: new binary which is used exclusively by
the AppArmor security driver to manipulate AppArmor.
* po/POTFILES.in: registers the new files
* tests/Makefile.am tests/secaatest.c tests/virt-aa-helper-test:
tests for virt-aa-helper and the security driver, secaatest.c is
identical to seclabeltest.c except it initializes the 'apparmor'
driver instead of 'selinux'
While running make check, I noticed that it was actually using
the virsh binary from my system, in /usr/bin/virsh, and not the
one that was just compiled. This is actually caused by a bug
in Makefile.am, where we didn't update the PATH to include tools.
While here, I also updated all of the scripts to properly define
the srcdir, abs_top_srcdir, and abs_top_builddir environment
variables. This is required if you want to be able to run the
tests standalone (i.e. ./test instead of from make check). I've
tested this on both RHEL-5 and Fedora-10 machines, and make check
works on both, as does running the individual tests by hand.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
A given domain XML gets converted to a VMX config, uploaded to the host
and registered as new virtual machine.
* src/esx/esx_driver.c: refactor datastore related path parsing into
esxUtil_ParseDatastoreRelatedPath()
* src/esx/esx_util.[ch]: add esxUtil_ParseDatastoreRelatedPath()
* src/esx/esx_vi.[ch]: add esxVI_Context_UploadFile(), add datastores to
the traversal in esxVI_BuildFullTraversalSpecList(), add
esxVI_LookupDatastoreByName()
* src/esx/esx_vi_methods.[ch]: add esxVI_RegisterVM_Task()
* src/esx/esx_vi_types.c: make some error message more verbose
* src/esx/esx_vmx.[ch]: add esxVMX_AbsolutePathToDatastoreRelatedPath()
to convert a path into a datastore related path, add esxVMX_ParseFileName()
to convert from VMX path format to domain XML path format, extend the other
parsing function to be datastore aware, add esxVMX_FormatFileName() to
convert from domain XML path format to VMX path format, fix VMX ethernet
entry formating
* tests/esxutilstest.c: add test for esxUtil_ParseDatastoreRelatedPath()
* tests/vmx2xmldata/*: update domain XML files to use datastore related paths
* tests/xml2vmxdata/*: update domain XML files to use datastore related paths,
update VMX files to use absolute paths
* tests/.gitignore: ignore new test binaries
* tests/Makefile.am: add new tests
* tests/esxutilstest.c: test esxVMX_IndexToDiskName()
* tests/vmx2xmldata/*: config files for the VMX to domain XML test
* tests/vmx2xmltest.c: test the VMX to domain XML mapping
* tests/xml2vmxdata/*: config files for the domain XML to VMX test
* tests/xml2vmxtest.c: test the domain XML to VMX mapping
Currently, libvirtd will start a dnsmasq process for the virtual
network, but (aside from killing the dnsmasq process and replacing it),
there's no way to define tftp boot options.
This change introduces the appropriate tags to the dhcp configuration:
<network>
<name>default</name>
<bridge name="virbr%d" />
<forward/>
<ip address="192.168.122.1" netmask="255.255.255.0">
<tftp root="/var/lib/tftproot" />
<dhcp>
<range start="192.168.122.2" end="192.168.122.254" />
<bootp file="pxeboot.img"/>
</dhcp>
</ip>
</network>
When the attributes are present, these are passed to the
arguments to dnsmasq:
dnsmasq [...] --enable-tftp --tftp-root /srv/tftp --dhcp-boot pxeboot.img
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^
from <tftp /> from <bootp />
At present, only local tftp servers are supported (ie, dnsmasq runs as
the tftp server), but we could improve this in future by adding a
server= attribute.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2009-09-21 Paolo Bonzini <pbonzini@redhat.com>
Jeremy Kerr <jk@ozlabs.org>
* docs/formatnetwork.html.in: Document new tags.
* docs/formatnetwork.html: Regenerate.
* docs/schemas/network.rng: Update.
* src/network_conf.c (virNetworkDefFree): Free new fields.
(virNetworkDHCPRangeDefParseXML): Parse <bootp>.
(virNetworkIPParseXML): New, parsing <dhcp> and <tftp>.
(virNetworkDefParseXML): Use virNetworkIPParseXML instead of
virNetworkDHCPRangeDefParseXML.
(virNetworkDefFormat): Pretty print new fields.
* src/network_conf.h (struct _virNetworkDef): Add netboot fields.
* src/network_driver.c (networkBuildDnsmasqArgv): Add
TFTP and BOOTP arguments.
* tests/Makefile.am (EXTRA_DIST): Add networkschemadata.
* tests/networkschematest: Look in networkschemadata.
* tests/networkschemadata/netboot-network.xml: New.
Latest upstream QEMU can be built with Xen support, which introduces
a -xen-domid argument. This was mistakenly detected as -domid due
to old Xenner support. Adapt to cope with both syntax. Also only
set domid if the virt type is xen, or the guest type is xen
* src/qemu_conf.c, src/qemu_conf.h: Detect new -xen-domid flag in
preference to -domid.
* tests/qemuxml2argvdata/qemuxml2argv-bootloader.args,
tests/qemuxml2argvdata/qemuxml2argv-input-xen.args: Add missing
-domid param
* tests/qemuxml2argvdata/qemuxml2argv-misc-uuid.args: Remove bogus
-boot param.
* tests/qemuxml2argvtest.c: Add missing QEMUD_CMD_FLAG_DOMID params
* docs/storage/: Move to examples/xml/storage/
* docs/test*.xml: Move to examples/xml/test/
* docs/Makefile.am: Remove example XML files from dist
* Makefile.am: Add examples/xml to EXTRA_DIST
* tests/virshtest.c: Update for moved test XML
* libvirt.spec.in: Include example XML files as docs
* tests/int-overflow: UPdate for moved XML
* src/capabilities.c, src/capabilities.h, src/domain_conf.c,
src/domain_conf.h, src/domain_event.c, src/domain_event.h,
src/interface_conf.c, src/interface_conf.h,
src/network_conf.c, src/network_conf.h, src/node_device_conf.c,
src/node_device_conf.h, src/secret_conf.c, src/secret_conf.h,
src/storage_conf.c, src/storage_conf.h, src/storage_encryption_conf.c,
src/storage_encryption_conf.h: Move to src/conf/
* src/Makefile.am: Add -Isrc/conf to the individual build targets
which need to use XML config APIs. Remove LIBXML_CFLAGS, LIBSSH2_CFLAGS
and SELINUX_CFLAGS from global INCLUDES and only have them in build
targets which actually need them. Create a libvirt_conf.la
convenience library for all config parsers
* src/hostusb.h: Remove bogus include of domain_conf.h
* tests/Makefile.am: Add -Isrc/conf. Remove bogus -I$builddir/src
since it never has any generated header files
* daemon/Makefile.am: Add -Isrc/conf
* proxy/Makefile.am: Add -Isrc/conf and cope with renamed files
* src/hash.c: Remove bogus include of libxml/threads.h
* daemon/default-network.xml: Move to src/network/default.xml
* daemon/libvirtd_qemu.aug, daemon/test_libvirtd_qemu.aug: Move
to src/qemu/
* src/qemu.conf: Move to src/qemu/qemu.conf
* daemon/Makefile.am: Remove rules for default-nmetwork.xml and
libvirtd_qemu.aug and test_libvirtd_qemu.aug. Fix typo in
uninstall-local that would install polkit again.
* src/Makefile.am: Add rules for installing network/default.xml
and the qemu/*.aug files. Add test case for QEMU augeas files.
Add uninstall-local rule for files/directories created during
install. Rename install-exec-local to install-data-local.
Only install qemu.conf if WITH_QEMU is set.
* tests/networkschematest: Update for XML location move
Move the virsh tool and its man page into the tools directory
* Makefile.am: Remove rules for virsh.1 man page
* virsh.1: Remove auto-generated file
* docs/Makefile.am: Remove rules for virsh.pod man page
* docs/virsh.pod: Move to tools/ directory
* src/Makefile.am, src/.gitignore: Remove rules for virsh
* src/console.c, src/console.h, src/*.ico, src/virsh_win_icon.rc,
src/virsh.c: Move into tools/ directory
* tools/Makefile.am: Add rules for building virsh
* tools/.gitignore: Ignore virsh built files
* tests/virshtest.c, tests/int-overflow: Update for new
virsh location
Fix all thread locking bugs reported by object-locking test
case.
NB, some of the driver locking is getting too coarse. Driver
mutexes really need to be turned into RW locks instead to
significantly increase concurrency.
* src/lxc_driver.c: Fix useof driver when unlocked in the methods
lxcDomainGetInfo, lxcSetSchedulerParameters, and
lxcGetSchedulerParameters
* src/opennebula/one_driver.c: Fix missing unlock in oneDomainUndefine.
Fix use of driver when unlocked in oneDomainGetInfo,
oneGetOSType, oneDomainShutdown
* src/qemu_driver.c: Fix use of driver when unlocked in
qemudDomainSavem, qemuGetSchedulerType, qemuSetSchedulerParameters
and qemuGetSchedulerParameters
* src/storage_driver.c: Re-work storagePoolCreate to avoid bogus
lock checking warning. Re-work storageVolumeCreateXMLFrom to
remove a potential NULL de-reference & avoid bogus lock check
warnings
* src/test.c: Remove testDomainAssignDef since it break lock chekc
warnings.
* tests/object-locking.ml: Add oneDriverLock, oneDriverUnlock
and one_driver_t methods/types to allow lock checking on the
OpenNebula drivers
* tests/testutilsqemu.c: add a machine types list for /usr/bin/kvm
which doesn't have any aliases, while the guest has aliases
* tests/qemuxml2argvdata/qemuxml2argv-machine-aliases2.*,
tests/qemuxml2argvtest.c: add a test using /usr/bin/kvm and make
sure that 'pc' machine type doesn't get canonicalized using the
aliases in the guest machine type list
* tests/testutilsqemu.c: make 'pc' an alias for qemu-system-x86_64
* tests/qemuxml2argvdata/qemuxml2argv-machine-aliases1.*,
tests/qemuxml2argvtest.c: add a test which uses qemu-system-x86_64
and make sure the machine type is canonicalized.
This doesn't have any affect on the current tests because we don't have
any machine aliases in the current test data.
* src/qemu_conf.h, src/qemu_driver.c: expose qemudCanonicalizeMachine()
for the tests
* tests/qemuxml2argvtest.c: canonicalize the machine type
Things added include
- x86_64 host
- Migration features
- NUMA topology
- Security model
- Canonical machine types
- Domain machine types
- An arm guest
- More machine types for mips, mipsel, sparc and ppc
- An x86_64 xenner guest
This file was generated on a Fedora 12 machine using latest libvirt
and qemu-kvm-0.11.0-rc2
* tests/capabilityschemadata/caps-qemu-kvm.xml: add more features
to test
If a file descriptor with events=0 was added to the libvirtd
event loop, it would still be added to the poll() fds' array.
While it wouldn't see any POLLIN/OUT events, it'd still get
triggered for HANGUP/ERROR events which was not in compliance
with the libvirt events API contract.
* qemud/event.c: Don't poll on FDs with events=0
* tests/eventtest.c: Add test case to validate fix to event.c
* docs/schemas/domain.rng: Add <serial> element to disks
* src/domain_conf.h, src/domain_conf.c: XML parsing and
formatting for disk serial numbers
* src/qemu_conf.c: Set serial number when launching guests
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-shared.args,
tests/qemuxml2argvdata/qemuxml2argv-disk-drive-shared.xml: Add
serial number to XML test
Add option to domain XML for
<memoryBacking>
<hugepages/>
</memoryBacking>
* configure.in: Add check for mntent.h
* qemud/libvirtd_qemu.aug, qemud/test_libvirtd_qemu.aug, src/qemu.conf
Add 'hugetlbfs_mount' config parameter
* src/qemu_conf.c, src/qemu_conf.h: Check for -mem-path flag in QEMU,
and pass it when hugepages are requested.
Load hugetlbfs_mount config parameter, search for mount if not given.
* src/qemu_driver.c: Free hugetlbfs_mount/path parameter in driver shutdown.
Create directory for QEMU hugepage usage, chowning if required.
* docs/formatdomain.html.in: Document memoryBacking/hugepages elements
* docs/schemas/domain.rng: Add memoryBacking/hugepages elements to schema
* src/util.c, src/util.h, src/libvirt_private.syms: Add virFileFindMountPoint
helper API
* tests/qemuhelptest.c: Add -mem-path constants
* tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c: Add tests for hugepage
handling
* tests/qemuxml2argvdata/qemuxml2argv-hugepages.xml,
tests/qemuxml2argvdata/qemuxml2argv-hugepages.args: Data files for
hugepage tests
* tests/testutils.c: Run test function twice, once to prime it for
static allocations, once to count the non-static allocations.
* tests/testutilsqemu.c: Initialize variable correctl
* src/capabilities.c: Don't free machines variable upon failure
since caller must do that
* src/xm_internal.c: Add missing check for OOM in building VIF
config param
Calling qsort() on the disks array causes disk to be
unneccessarily re-ordered, potentially breaking the
ability to boot if the boot disk gets moved later in
the list. The new algorithm will insert a new disk as
far to the end of the list as possible, while being
ordered correctly wrt other disks on the same bus.
* src/domain_conf.c, src/domain_conf.h: Remove disk sorting
routines. Add API to insert a disk into existing list at
the optimal position, without resorting disks
* src/libvirt_private.syms: Export virDomainDiskInsert
* src/xend_internal.c, src/xm_internal.c: Remove calls to
qsort, use virDomainDiskInsert instead.
* src/qemu_driver.c: Remove calls to qsort, use virDoaminDiskInsert
instead. Fix reordering bugs when hotunplugging disks and
networks. Fix memory leak in disk/net unplug
