When adding support for externally launched virtiofsd,
I was too liberal and did not require a target.
But the target is required, because it's passed to the
QEMU device, not to virtiofsd.
https://bugzilla.redhat.com/show_bug.cgi?id=1969232
Fixes: 12967c3e13
Fixes: 56dcdec1ac
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
I expect to find a link to the repositories when clicking on
"Contribute", this patch fixes this. The wording is directly inspired by
the one on the hacking page.
Signed-off-by: Simon Chopin <chopin.simon@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Links between NUMA nodes can have different latencies and
bandwidths. This info is newly defined in ACPI 6.2 under
Heterogeneous Memory Attribute Table (HMAT) table. Linux kernel
learned how to report these values under sysfs and thus we can
expose them in our capabilities XML. The sysfs interface is
documented in kernel's Documentation/admin-guide/mm/numaperf.rst.
Long story short, two nodes can be in initiator-target
relationship. A node can be initiator if it has a CPU or a device
that's capable of initiating memory transfer. Therefore a node
that has just memory can only be target. An initiator-target link
can then have any combination of {bandwidth, latency} - {access,
read, write} attribute (6 in total). However, the standard says
access is applicable iff read and write values are the same.
Therefore, we really have just four combinations of attributes:
bandwidth-read, bandwidth-write, latency-read, latency-write.
This is the combination that kernel reports anyway.
Then, under /sys/system/devices/node/nodeX/acccessN/initiators we
find values for those 4 attributes and also symlinks named
"nodeN" which then represent initiators to nodeX. For instance:
/sys/system/node/node1/access1/initiators/node0 -> ../../node0
/sys/system/node/node1/access1/initiators/read_bandwidth
/sys/system/node/node1/access1/initiators/read_latency
/sys/system/node/node1/access1/initiators/write_bandwidth
/sys/system/node/node1/access1/initiators/write_latency
This means that node0 is initiator and node1 is target and values
of the interconnect can be read.
In theory, there can be separate links to memory side caches too
(e.g. one link from node X to node Y's main memory, another from
node X to node Y's L1 cache, another one to L2 cache and so on).
But sysfs does not express this relationship just yet.
The "accessN" means either "access0" or "access1". The difference
is that while the former expresses the best interconnect between
two nodes including CPUS and I/O devices (such as GPUs and NICs),
the latter includes only CPUs and thus is what we need.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1786309
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Memory on a NUMA node can have a side caches. Configuring these
for a domain was implemented in v6.6.0-rc1~249 and friends.
However, up until now mgmt applications did not really know what
values to pass because we were not exposing caches of the host.
With recent enough kernel these are exposed under sysfs and with
a bit of parsing we can extend our capabilities XML. The sysfs
structure is documented in kernel's
Documentation/admin-guide/mm/numaperf.rst and basically maps in
1:1 fashion to our virNumaCache structure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It may happen that a NUMA node has no CPUs associated with it. We
allow this for domains since v6.6.0-rc1~250. Let's update our
capabilities schema to match that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Currently we expose libvirt Go packages at
libvirt.org/libvirt-go
libvirt.org/libvirt-go-xml
These packages have not supported Go modules historically and when we
tried to introduce modules, we hit the problem that we're not using
semver for versioning.
The only way around this is to introduce new packages under a different
namespace, that will have the exact same code, but be tagged with a
different version numbering scheme.
This change proposes:
libvirt.org/go/libvirt
libvirt.org/go/libvirtxml
Note the hyphen is removed so that the import basename matches the
Go package name.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Disk serials are truncated arbitrarily and silently by qemu depending on
the device type and how they are configured. Since changing the current
state would lead to more regressions than we have now, document that the
truncation is arbitrary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Nowadays memfd is the most convenient memory backend for vhost-user
devices. Compared to file-backend memory and hugepages, there is no need
to worry about configuring the location of the shm directory or
allocating hugepages.
Cc: Michal Prívozník <mprivozn@redhat.com>
Cc: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove some dupicate text and replace in incorrect occurance of
monolithic with modular.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The <audio> element is configuring exclusively a backend, not a device.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Cloud-Hypervisor is a KVM virtualization using hypervisor. It
functions similarly to qemu and the libvirt Cloud-Hypervisor driver
uses a very similar structure to the libvirt driver.
The biggest difference from the libvirt perspective is that the
"monitor" socket is seperated into two sockets one that commands are
issued to and one that events are notified from. The current
implementation only uses the command socket (running over a REST API
with json encoded data) with future changes to add support for the
event socket (to better handle shutdowns from inside the VM).
This patch adds support for the following initial VM actions using the
Cloud-Hypervsior API:
* vm.create
* vm.delete
* vm.boot
* vm.shutdown
* vm.reboot
* vm.pause
* vm.resume
To use the Cloud-Hypervisor driver, the v15.0 release of
Cloud-Hypervisor is required to be installed.
Some additional notes:
* The curl handle is persistent but not useful to detect ch process
shutdown/crash (a future patch will address this shortcoming)
* On a 64-bit host Cloud-Hypervisor needs to support PVH and so can
emulate 32-bit mode but it isn't fully tested (a 64-bit kernel and
32-bit userspace is fine, a 32-bit kernel isn't validated)
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
We supported autostart of node devices via an xml element, but this
is not consistent with other libvirt objects which use an explicit API
for setting autostart status. So revert this and implement it as an
official API in a future commit.
The initial support was refactored after merging, so this commit reverts
both of those previous commits.
Revert "virNodeDevCapMdevParseXML: Use virXMLPropEnum() for ./start/@type"
This reverts commit 9d4cd1d1cd.
Revert "nodedev: support auto-start property for mdevs"
This reverts commit 42a5585499.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In case the user wants to share the disk image between multiple VMs the
qemu driver needs to hotplug such disks to instantiate the backends.
Since that doesn't work for all disk configs add a switch to force this
behaviour.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Using slice to cut off the end of the image is a perfectly vaid
configuration. Use 'unsignedInt' instead of 'positiveInteger' for the
'offset' attribute in the XML schema and modify one test case to cover
this use case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1960993
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
After previous patches we have two structures:
virCapsHostNUMACellDistance and virNumaDistance which express the
same thing. And have the exact same members (modulo their names).
Drop the former in favor of the latter.
This change means that distances with value of 0 are no longer
printed out into capabilities XML, because domain XML code allows
partial distance specification and thus threats value of 0 as
unspecified by user (see virDomainNumaGetNodeDistance() which
returns the default LOCAL/REMOTE distance for value of 0).
Also, from ACPI 6.1 specification, section 5.2.17 System Locality
Distance Information Table (SLIT):
Distance values of 0-9 are reserved and have no meaning.
Thus we shouldn't be ever reporting 0 in neither domain nor
capabilities XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The default value hard-coded in QEMU (64KiB) is not always the ideal.
Having a possibility to set the cluster_size by user may in specific
use-cases improve performance for QCOW2 images.
QEMU internally has some limits, the value has to be between 512B and
2048KiB and must by power of two, except when the image has Extended L2
Entries the minimal value has to be 16KiB.
Since qemu-img ensures the value is correct and the limit is not always
the same libvirt will not duplicate any of these checks as the error
message from qemu-img is good enough:
Cluster size must be a power of two between 512 and 2048k
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/154
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In previous commit the virDomainCoreDumpWithFormat() API gained
new format. Expose it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This adds a new element to the mdev capabilities xml schema that
represents the start policy for a defined mediated device. The actual
auto-start functionality is handled behind the scenes by mdevctl, but it
wasn't yet hooked up in libvirt.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is a rewrite of:
https://wiki.libvirt.org/page/Live-disk-backup-with-active-blockcommit
Once this commit merges, the above wiki should point to this kbase
document.
NB: I've intentionally left out the example for pull-based full backups.
I'll tackle it once QMP `x-blockdev-reopen` comes out of experimental
mode in upstream QEMU. Then pull-based can be described for both full
and and differntial backups.
Overall, future documents should cover:
- full backups using both push- and pull-mode
- differential backups using both push- and pull-mode
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 68c5b6fb2b libxl also handles
a domain/cputune/vcpupin element in domU.xml.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
As of May 7 2021, rhel-8 will be out for two years, which means we no
longer have to support rhel-7 ancient qemu.
QEMU versions in our supported distros:
RHEL-8: 2.12
Debian Stable: 3.1
OpenSuse LEAP 15.0 (SLES15 GA): 2.11
OpenSuse LEAP 15.2: 4.2
Ubuntu (Bionic): 2.11
Ubuntu (Focal): 4.2
This means we can bring up the minimum supported version to 2.11.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Provide an exmple in a place more visible than formatdomain.html.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
It's now empty, so no point in keeping it around.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's useful to have virt-admin around when debugging issues
with libvirtd, and since it's a tiny binary we can simply
include it in the -daemon package to ensure it's always going
to be available when needed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It doesn't only contain the libvirtd binary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This adds a new XML element
<filesystem>
<binary>
<sandbox mode='chroot|namespace'/>
</binary>
</filesystem>
This will be used by qemu virtiofs
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Allow passing a socket of an externally launched virtiofsd
to the vhost-user-fs device.
<filesystem type='mount'>
<driver type='virtiofs' queue='1024'/>
<source socket='/tmp/sock/'/>
</filesystem>
https://bugzilla.redhat.com/show_bug.cgi?id=1855789
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The end quote of the argument of :since: must not have a space in front
of it as it's then not considered as end of the argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This allows users to restrict memory nodes without setting any specific
memory policy, then 'restrictive' mode is useful.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 95f8e3237e which introduced XML schema validation
for snapshot XMLs always asserted the validation for the XML generated
by 'virsh snapshot-create-as' on the basis that it's libvirt-generated,
thus valid.
This unfortunately isn't true as users can influence certain bits of the
XML such as the disk image path which must be a full path. Thus if a
user tries to invoke virsh as:
$ virsh snapshot-create-as upstream --diskspec vda,file=relative.qcow2
error: XML document failed to validate against schema: Unable to validate doc against /path/to/domainsnapshot.rng
Extra element disks in interleave
Element domainsnapshot failed to validate content
They get a rather useless error from the libxml2 RNG validator.
With this fix applied, we get to the XML parser in libvirtd which has a
more reasonable error:
$ virsh snapshot-create-as upstream --diskspec vda,file=relative.qcow2
error: XML error: disk snapshot image path 'relative.qcow2' must be absolute
Instead users can force validation of the XML generated by 'virsh
snapshot-create-as' by passing the '--validate' flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When querying guest info via virDomainGetGuestInfo() the
'guest-get-disks' agent command is called. It may report disk
serial number which we parse, but never report nor use for
anything else.
As it turns out, it may help management application find matching
disk in their internals.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-By: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Historically, we declared pointer type to our types:
typedef struct _virXXX virXXX;
typedef virXXX *virXXXPtr;
But usefulness of such declaration is questionable, at best.
Unfortunately, we can't drop every such declaration - we have to
carry some over, because they are part of public API (e.g.
virDomainPtr). But for internal types - we can do drop them and
use what every other C project uses 'virXXX *'.
This change was generated by a very ugly shell script that
generated sed script which was then called over each file in the
repository. For the shell script refer to the cover letter:
https://listman.redhat.com/archives/libvir-list/2021-March/msg00537.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
While the key is available on public GPG key servers, having it locally
at https://libvirt.org/sources/gpg_key.asc is even better.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Mention that mdev attribute order is significant.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
It will be useful to be able to specify a particular UUID for a mediated
device when defining the node device. To accomodate that, allow this to
be specified in the xml schema. This patch also parses and formats that
value to the xml, but does not yet use it.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
PCI devices can be associated with a unique integer index that is
exposed via ACPI. In Linux OS with systemd, this value is used for
provide a NIC device naming scheme that is stable across changes
in PCI slot configuration.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
