This patch adds instrumentation that will allow hypervisor drivers to
fill and validate domain and device definitions after parsed by the XML
parser.
With this patch, after the XML is parsed, a callback to the driver is
issued requesting to fill and validate driver specific details of the
configuration. This allows to use sensible defaults and checks on a per
driver basis at the time the XML is parsed.
Two callback pointers are stored in the new virDomainXMLConf object:
* virDomainDeviceDefPostParseCallback (devicesPostParseCallback)
- called for a single device parsed and for every single device in a
domain config. A virDomainDeviceDefPtr is passed along with the
domain definition and virCaps.
* virDomainDefPostParseCallback, (domainPostParseCallback)
- A callback that is meant to process the domain config after it's
parsed. A virDomainDefPtr is passed along with virCaps.
Both types of callbacks support arbitrary opaque data passed for the
callback functions.
Errors may be reported in those callbacks resulting in a XML parsing
failure.
This patch is the result of running:
for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done
and a few manual tweaks.
Implement the bare minimal sysinfo for ARM platforms by
reading the CPU models from /proc/cpuinfo
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Certain functions in the sysinfotest.c are not used unless
a whitelisted architecture is being built. Disable those
functions unless required to avoid warnings about unused
functions.
sysinfotest.c:93:1: warning: 'sysinfotest_run' defined but not used [-Wunused-function]
sysinfotest_run(const char *test,
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virsh schedinfo was able to set only one parameter at a time (not
counting the deprecated options), but it is useful to set more at
once, so this patch adds the possibility to do stuff like this:
virsh schedinfo <domain> cpu_shares=0 vcpu_period=0 vcpu_quota=0 \
emulator_period=0 emulator_quota=0
Invalid scheduler options are reported as well. These were previously
reported only if the command hadn't updated any values (when
cmdSchedInfoUpdate returned 0).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=810078
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=919372
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=919375
The domain XML generator creates the mac addres strings with lowercase
strings with a separate piece of code. This patch changes the formating
helper to do the same stuff to allow using it to normalize a string
provided by the user. After this change some of the tests that are
outputing the mac address will need to be changed.
Currently, -machine option is used only when dump-guest-core is set.
To use options defined in machine option for newer version of QEMU,
it needs to use -machine xxx, and to be compatible with older version
-M, this patch adds QEMU_CAPS_MACHINE_OPT capability for newer
version which supports -machine option.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reported by Anthony Messina in
https://bugzilla.redhat.com/show_bug.cgi?id=904692
Present since introduction of smartcard support in commit f5fd9baa
* src/qemu/qemu_command.c (qemuBuildCommandLine): Match qemu spelling.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-host-certificates.args:
Fix broken test.
Allow migration over IPv6 by listening on [::] instead of 0.0.0.0
when QEMU supports it (QEMU_CAPS_IPV6_MIGRATION) and there is
at least one v6 address configured on the system.
Use virURIParse in qemuMigrationPrepareDirect to allow parsing
IPv6 addresses, which would cause an 'incorrect :port' error
message before.
Move setting of migrateFrom from qemuMigrationPrepare{Direct,Tunnel}
after domain XML parsing, since we need the QEMU binary path from it
to get its capabilities.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=846013
This reverts commit 5ac846e42e.
After further discussions with Alon Levy, I learned the following:
The use of '-vga qxl' vs. '-device qxl-vga' is completely orthogonal
to whether ram_size can be exposed. Downstream distros are interested
in backporting support for multi-head qxl, but this can be done in
one of two ways:
1. Support one head per PCI device. If you do this, then it makes
sense to have full control over the PCI address of each device. For
full control, you need '-device qxl-vga' instead of '-vga qxl'.
2. Support multiple heads through a single PCI device. If you do
this, then you need to allocate more RAM to that PCI device (enough
ram to cover the multiple screens). Here, the device is hard-coded
to 0:0:2.0, both in qemu and libvirt code.
Apparently, backporting ram_size changes to allow multiple heads in
a single device is much easier than backporting multiple device
support. Furthermore, the presence or absence of qxl-vga.surfaces
is no different than the presence or absence of qxl-vga.ram_size;
both properties can be applied regardless of whether you have one
PCI device (-vga qxl) or multiple (-device qxl-vga), so this property
is NOT a good witness of whether '-device qxl-vga' support has been
backported.
Downstream RHEL will NOT be using this patch; and worse, leaving this
patch in risks doing the wrong thing if compiling upstream libvirt
on RHEL, so the best course of action is to revert it. That means
that libvirt will go back to only using '-device qxl-vga' for qemu
>= 1.2, but this is just fine because we know of no distros that plan
on backporting multiple PCI address support to any older version of
qemu. Meanwhile, downstream can still use ram_size to pack multiple
heads through a single PCI device.
This does nothing more than adding the new device and capability.
The device is present since QEMU 1.2.0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A better way to do this would be to use a configuration file like
[iscsi "target-name"]
user = name
password = pwd
and pass it via -readconfig. This would remove the username and password
from the "ps" output. For now, however, keep this solution.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
libiscsi provides a userspace iSCSI initiator.
The main advantage over the kernel initiator is that it is very
easy to provide different initiator names for VMs on the same host.
Thus libiscsi supports usage of persistent reservations in the VM,
which otherwise would only be possible with NPIV.
libiscsi uses "iscsi" as the scheme, not "iscsi+tcp". We can change
this in the tests (while remaining backwards-compatible manner, because
QEMU uses TCP as the default transport for both Gluster and NBD).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This plumbs in the XML description of iSCSI shares. The next patches
will add support for the libiscsi userspace initiator.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "dtb" option sets the filename for the device tree.
If without this option support, "-dtb file" will be converted into
<qemu:commandline> in domain XML file.
For example, '-dtb /media/ram/test.dtb' will be converted into
<qemu:commandline>
<qemu:arg value='-dtb'/>
<qemu:arg value='/media/ram/test.dtb'/>
</qemu:commandline>
This is not very friendly.
This patchset add special <dtb> tag like <kernel> and <initrd>
which is easier for user to write domain XML file.
<os>
<type arch='ppc' machine='ppce500v2'>hvm</type>
<kernel>/media/ram/uImage</kernel>
<initrd>/media/ram/ramdisk</initrd>
<dtb>/media/ram/test.dtb</dtb>
<cmdline>root=/dev/ram rw console=ttyS0,115200</cmdline>
</os>
Signed-off-by: Eric Blake <eblake@redhat.com>
To prevent confusion with configure's popular name
for a file, rename conftest.c to test_conf.c which
is consistent with the invoking test_conf.sh
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Introduce a local object virIdentity for managing security
attributes used to form a client application's identity.
Instances of this object are intended to be used as if they
were immutable, once created & populated with attributes
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
QEMU 1.3 and newer support an alternative URI-based syntax to specify
the location of an NBD server. Libvirt can keep on using the old
syntax in general, but only the URI syntax supports IPv6 addresses.
The URI syntax also supports relative paths to Unix sockets. These
should never be used but aren't explicitly blocked either by the parser,
so support it just in case.
The URI syntax is intentionally compatible with Gluster's, and the
code can be reused.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This reuses the XML format that was introduced for Gluster.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
These are supported by nbd-server and by the NBD server that QEMU
embeds for live image access.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Enable more testing of NBD parsing, to ensure rewrites work.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Adding test cases for virtio-scsi and virtio-rng. Since ccw is covering
the superset of the s390 bus handling, these are deemed to be sufficient.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
QEMU_CAPS_VIRTIO_SCSI_PCI implies that virtio-scsi is only supported
for the PCI bus, which is not the case. Remove the _PCI suffix.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Multi-head QXL support is so useful that distros have started to
backport it to qemu earlier than 1.2. After discussion with
Alon Levy, we determined that the existence of the qxl-vga.surfaces
property is a reliable indicator of whether '-device qxl-vga' works,
or whether we have to stick to the older '-vga qxl'. I'm leaving
in the existing check for QEMU_CAPS_DEVICE_VIDEO_PRIMARY tied to
qemu 1.2 and newer (in case qemu is built without qxl support),
but for those distros that backport qxl, this additional capability
check will allow the correct command line for both RHEL 6.3 (which
lacks the feature) and RHEL 6.4 (where qemu still claims to be
version 0.12.2.x, but has backported multi-head qxl).
* src/qemu/qemu_capabilities.c (virQEMUCapsObjectPropsQxlVga): New
property test.
(virQEMUCapsExtractDeviceStr): Probe for backport of new
capability to qemu earlier than 1.2.
* tests/qemuhelpdata/qemu-kvm-1.2.0-device: Update test.
* tests/qemuhelpdata/qemu-1.2.0-device: Likewise.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta-device:
Likewise.
Normally libvirtd should run with a SELinux label
system_u:system_r:virtd_t:s0-s0:c0.c1023
If a user manually runs libvirtd though, it is sometimes
possible to get into a situation where it is running
system_u:system_r:init_t:s0
The SELinux security driver isn't expecting this and can't
parse the security label since it lacks the ':c0.c1023' part
causing it to complain
internal error Cannot parse sensitivity level in s0
This updates the parser to cope with this, so if no category
is present, libvirtd will hardcode the equivalent of c0.c1023.
Now this won't work if SELinux is in Enforcing mode, but that's
not an issue, because the user can only get into this problem
if in Permissive mode. This means they can now start VMs in
Permissive mode without hitting that parsing error
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Qemu's implementation of virtio RNG supports rate limiting of the
entropy used. This patch exposes the option to tune this functionality.
This patch is based on qemu commit 904d6f588063fb5ad2b61998acdf1e73fb4
The rate limiting is exported in the XML as:
<devices>
...
<rng model='virtio'>
<rate bytes='123' period='1234'/>
<backend model='random'/>
</rng>
...
The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.
This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:
1) Get rid of the stuff from virCaps
2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.
This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.
'virsh capabilities' will now include a new <memory> element
per <cell> of the topology, as in:
<topology>
<cells num='2'>
<cell id='0'>
<memory unit='KiB'>12572412</memory>
<cpus num='12'>
...
</cell>
Signed-off-by: Eric Blake <eblake@redhat.com>
Code that validates the whitelist for the RNG device filename
didn't account for fact that filename may be NULL. This led
to a NULL reference crash. This wasn't caught since the test
suite was not covering this XML syntax
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There is some controversy[1] on the qemu list on whether qemu should
have ever allowed arbitrary file name passthrough, or whether it
should be restricted to JUST /dev/random and /dev/hwrng. It is
always easier to add support for additional filenames than it is
to remove support for something once released, so this patch
restricts libvirt 1.0.3 (where the virtio-random backend was first
supported) to just the two uncontroversial names, letting us defer
to a later date any decision on whether supporting arbitrary files
makes sense. Additionally, since qemu 1.4 does NOT support
/dev/fdset/nnn fd passthrough for the backend, limiting to just
two known names means that we don't get tempted to try fd
passthrough where it won't work.
[1]https://lists.gnu.org/archive/html/qemu-devel/2013-03/threads.html#00023
* src/conf/domain_conf.c (virDomainRNGDefParseXML): Only allow
/dev/random and /dev/hwrng.
* docs/schemas/domaincommon.rng: Flag invalid files.
* docs/formatdomain.html.in (elementsRng): Document this.
* tests/qemuxml2argvdata/qemuxml2argv-virtio-rng-random.args:
Update test to match.
* tests/qemuxml2argvdata/qemuxml2argv-virtio-rng-random.xml:
Likewise.
When given a CA cert with basic constraints to set non-critical,
and key usage of 'key signing', this should be rejected. Version
of GNUTLS < 3 do not rejecte it though, so we never noticed the
test case was broken
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This reverts commit 383ebc4694.
We decided the xml for this feature needed more thought to make sure
we are doing it the best way, in particular wrt option values that
have multiple items.
virstoragetest was failing on RHEL 5, but with no good error message:
TEST: virstoragetest
0 FAIL
It turns out that qemu-img was so old, that it lacked support for
-o backing_file. It didn't help that the test was also using
qemu-img from PATH, even after first probing for kvm-img.
* tests/virstoragetest.c (testPrepImages): Consistently use
discovered binary. Skip instead of fail if qemu-img fails during
setup.
On RHEL 5, 'make check' included failures such as:
TEST: virstoragetest
unable to create directory /virstoragedata/sub
unable to return to correct directory, refusing to clean up /virstoragedata
It turns out that with automake 1.9.x, $(abs_builddir) is not
automatically provided. We have previously worked around this
by using `pwd` before, but because we did not do it everywhere,
we had a number of broken tests.
This patch brings RHEL 5 from 8 failed tests down to 5 (the
remaining failures may be due to bugs in the older libxml2 and
RNG schema validation available in RHEL 5, so I'm not sure if
they can be fixed in libvirt, but I'm still investigating).
* tests/Makefile.am (AM_CFLAGS): Reliably set abs_builddir.
(*_la_CFLAGS): Factor out common settings; delete when nothing
remains to be added.
On RHEL 5, I noticed this test failure message:
TEST: qemumonitorjsontest
libvirt not compiled with yajl, skippingSKIP: qemumonitorjsontest
* tests/virstoragetest.c (testPrepImages): Use simpler fputs.
* tests/qemumonitorjsontest.c (mymain): Ensure trailing newline.
testutils.c likes to print summaries after a test completes,
including if it failed. But if the test outright exit()s,
this summary is skipped. Enforce that we return instead of exit.
* cfg.mk (sc_prohibit_exit_in_tests): New syntax check.
* tests/commandhelper.c (main): Fix offenders.
* tests/qemumonitorjsontest.c (mymain): Likewise.
* tests/seclabeltest.c (main): Likewise.
* tests/securityselinuxlabeltest.c (mymain): Likewise.
* tests/securityselinuxtest.c (mymain): Likewise.
* tests/testutils.h (VIRT_TEST_MAIN_PRELOAD): Likewise.
* tests/testutils.c (virtTestMain): Likewise.
(virtTestCaptureProgramOutput): Use symbolic name.
Now that the segfault is solved, we can skip instead of fail
the test when yajl is not present.
* tests/qemumonitorjsontest.c (mymain): Skip if no yajl.
On a machine without yajl headers, I was seeing random segfaults
from qemumonitorjsontest (about 90% of the runs on my particular
machine). The segfault was inside virClassIsDerivedFrom, which
points to a case of a race leading to unreferencing a stale
pointer to an object that had already been freed. I also noticed
that if I got the segfault, I was seeing messages such as:
2013-02-22 16:12:37.504+0000: 19833: error : virNetSocketWriteWire:1361 : Cannot write data: Bad file descriptor
which is also evidence of deferencing a stale pointer. I traced it
to a race where qemuMonitorTestIO could execute late, after the
main thread had already called qemuMonitorTestFree and called
virNetSocketClose(test->client) but not clearing it out to NULL.
Sure enough, after test->client has been closed, fd is -1, which
causes an attempt to write to the socket to fail, which in turn
triggers the error code of qemuMonitorTestIO that tries to re-close
test->client.
* tests/qemumonitortestutils.c (qemuMonitorTestIO): Don't attempt
to free client again if test already quit.
Originally, only a host name was used to associate a
DHCPv6 request with a specific IPv6 address. Further testing
demonstrates that this is an unreliable method and, instead,
a client-id or DUID needs to be used. According to DHCPv6
standards, this id can be a duid-LLT, duid-LL, or duid-UUID
even though dnsmasq will accept almost any text string.
Although validity checking of a specified string makes sure it is
hexadecimal notation with bytes separated by colons, there is no
rigorous check to make sure it meets the standard.
Documentation and schemas have been updated.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Laine Stump <laine@laine.org>
This patch adds support for a new <option>-Tag in the <dhcp> block of
network configs, based on a subset of the fifth proposal by Laine
Stump in the mailing list discussion at
https://www.redhat.com/archives/libvir-list/2012-November/msg01054.html.
Any such defined option will result in a dhcp-option=<number>,"<value>"
statement in the generated dnsmasq configuration file.
Currently, DHCP options can be specified by number only and there is
no whitelisting or blacklisting of option numbers, which should
probably be added.
Signed-off-by: Pieter Hollants <pieter@hollants.com>
Signed-off-by: Laine Stump <laine@laine.org>
