qemu-2.8 didn't yet support QEMU_CAPS_ISCSI_PASSWORD_SECRET. This
version will allow integrating multiple test cases into one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modernize the current state to the pre-blockdev version of qemu to
minimize changes. Later patch will add a 'latest' case too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is pretty straightforward and self explanatory.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1837990
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Currently, the @vm is passed in as an argument and
testCompareXMLToArgvCreateArgs() is called over it which means
under the hood qemuProcessPrepareDomain() is called. But at the
point where ValidateSchema() is called, the domain object is
already 'prepared', i.e. all device aliases are assigned and so
on. But our code is not prepared to 'prepare' a domain twice - it
simply overwrites all the pointers leading to a memory leak.
Fortunately, this is only the problem of this test.
Resolve this by constructing the domain object from scratch.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Our hotplug test cases are weak in comparison to the qemuxml2argvtest.
Use all the the input data to also validate the arguments for -netdev
and -blockdev against the appropriate commands of the QMP schema.
Note that currently it's done just for the _CAPS versions of tests but
commenting out a line in the test file allows to validate even cases
which don't use real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemuxml2argv test suite is way more comprehensive than the hotplug
suite. Since we share the code paths for monitor and command line
hotplug we can easily test the properties of devices against the QAPI
schema.
To achieve this we'll need to skip the JSON->commandline conversion for
the test run so that we can analyze the pure properties. This patch adds
flags for the comand line generator and hook them into the
JSON->commandline convertor for -netdev. An upcoming patch will make use
of this new infrastructure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
There are multiple steps of setting up the domain definition prior to
formatting the command line for the tests. Extract it to a separate
function so that it's self-contained and also will allow re-running the
command line formatting which will be necessary for QMP schema
validation tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This is not yet supported by virtiofsd.
Fixes#23 a.k.a. https://gitlab.com/libvirt/libvirt/-/issues/23
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The 'vexpress-a9' ARM board supports the native 'sd' bus as well as
virtio. Add a test case for proving that upcoming changes to handling of
'sd' work. This config was also tested with real qemu and the qemu
process starts correctly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Previously we've validated it in qemuCheckDiskConfig which was directly
called from the command line generator. Move the checks to the validator
where they belong.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Switch to DO_TEST_CAPS_LATEST for all of them and also add pre-blockdev
case for 'disk-discard' as we had it before.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the tests to DO_TEST_CAPS_LATEST. Since switch to blockdev stopped
us formatting the tunning parameters on the command line let's also add
version cases for qemu-4.1 data which doesn't enable blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Turns out that it's not enough to pass the qemu:///embed root to
virQEMUDriverConfigNew(), you also have to make sure the same
string is copied into the virQEMUDriver structure yourself, and
not doing so in our case resulted in the cleanup never happening
and in distcheck failing because of that.
On the other hand, actually setting config->embeddedRoot would
result in different paths being generated for each test run, which
would obviously break qemuxml2argvtest, so that's not an option
either.
This reverts commit d98cc1968e.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Now that the QEMU driver natively supports storing all its runtime
data inside an arbitrary directory, we can avoid having multiple
copies of the same logic in the test suite.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Instead of the following pattern:
type ret;
...
ret = func();
return ret;
we can use:
return func()
directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Move capability validation of virtio options from command line
generation to post-parse device validation where it belongs.
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add separate tests for individual options and devices for virtio-options
to have the ability to do more fine-granular testing of various
combinations.
Also, add negative tests for unavailable capabilities.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Convert the virtio-options test in qemuxml2argv and qemuxml2xml to use
the latest available QEMU capabilities.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This patch adds the implementation of the IBS pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_IBS capability added
in the previous patch.
IBS can have the following values: "broken", "workaround",
"fixed-ibs", "fixed-ccd" and "fixed-na".
This is the XML format for the cap:
<features>
<ibs value='fixed-ibs'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the implementation of the SBBC pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_SBBC capability added
in the previous patch.
Like the previously added CFPC feature, SBBC can have the values
"broken", "workaround" or "fixed". Extra code is required to handle
it since it's not a regular tristate capability.
This is the XML format for the cap:
<features>
<sbbc value='workaround'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the implementation of the CFPC pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_CFPC capability added
in the previous patch.
CPFC can have the values "broken", "workaround" or "fixed". Extra
code is required to handle it since it's not a regular tristate
capability.
This is the XML format for the cap:
<features>
<cfpc value='workaround'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If a pcie-root-port or pcie-downstream-port has hotplug='off' in its
<target> subelement, and if the qemu binary supports the hotplug=false
option, then it will be added to the commandline for the pcie
controller. This controller will then not allow any hotplug/unplug of
devices while the guest is running (and the hotplug capability won't
be advertised to the guest OS, so the guest OS also won't present
unplugging of PCI devices as an option).
<controller type='pci' model='pcie-root-port'>
<target hotplug='off'/>
</controller>
For any PCI controllers other than pcie-downstream-port and
pcie-root-port, of for qemu binaries that don't support the hotplug
commandline option, an error will be logged during validation.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pass the packed option on the QEMU command line of the capability for
packed virtqueues is detected and the parameter is set explicitly.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This option prevents misbehaviours on guest if a qemu 9pfs export
contains multiple devices, due to the potential file ID collisions
this otherwise may cause.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To demonstrate the move of these attributes from -drive to -device.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Using the 'uuid' element for ppc64 NVDIMM memory added in the
previous patch, use it in qemuBuildMemoryDeviceStr() to pass
it over to QEMU.
Another ppc64 restriction is the necessity of a mem->labelsize,
given than ppc64 only support label-area backed NVDIMMs.
Finally, we don't want ppc64 NVDIMMs to align up due to the
high risk of going beyond the end of file with a 256MiB
increment that the user didn't predict. Align it down
instead. If target size is less than the minimum of
256MiB + labelsize, error out since QEMU will error out
if we attempt to round it up to the minimum.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Upcoming patches will implement the support for sslverify, cookies,
readahead, and timeout properties. Add a test file which will collect
the cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Format the 'vhost-user-fs' device on the QEMU command line.
This device provides shared file system access using the FUSE protocol
carried over virtio.
The actual file server is implemented in an external vhost-user-fs device
backend process.
https://bugzilla.redhat.com/show_bug.cgi?id=1694166
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Start virtiofsd for each <filesystem> device using it.
Pre-create the socket for communication with QEMU and pass it
to virtiofsd.
Note that virtiofsd needs to run as root.
https://bugzilla.redhat.com/show_bug.cgi?id=1694166
Introduced by QEMU commit a43efa34c7d7b628cbf1ec0fe60043e5c91043ea
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
This patch adds a test case for domain XML with the tpm-spapr TPM device
model.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The QEMU driver uses the <teaming type='persistent|transient'
persistent='blah'/> element to setup a "failover" pair of devices -
the persistent device must be a virtio emulated NIC, with the only
extra configuration being the addition of ",failover=on" to the device
commandline, and the transient device must be a hostdev NIC
(<interface type='hostdev'> or <interface type='network'> with a
network that is a pool of SRIOV VFs) where the extra configuration is
the addition of ",failover_pair_id=$aliasOfVirtio" to the device
commandline. These new options are supported in QEMU 4.2.0 and later.
Extra qemu-specific validation is added to ensure that the device
type/model is appropriate and that the qemu binary supports these
commandline options.
The result of this will be:
1) The virtio device presented to the guest will have an extra bit set
in its PCI capabilities indicating that it can be used as a failover
backup device. The virtio guest driver will need to be equipped to do
something with this information - this is included in the Linux
virtio-net driver in kernel 4.18 and above (and also backported to
some older distro kernels). Unfortunately there is no way for libvirt
to learn whether or not the guest driver supports failover - if it
doesn't then the extra PCI capability will be ignored and the guest OS
will just see two independent devices. (NB: the current virtio guest
driver also requires that the MAC addresses of the two NICs match in
order to pair them into a bond).
2) When a migration is requested, QEMu will automatically unplug the
transient/hostdev NIC from the guest on the source host before
starting migration, and automatically re-plug a similar device after
restarting the guest CPUs on the destination host. While the transient
NIC is unplugged, all network traffic will go through the
persistent/virtio device, but when the hostdev NIC is plugged in, it
will get all the traffic. This means that in normal circumstances the
guest gets the performance advantage of vfio-assigned "real hardware"
networking, but it can still be migrated with the only downside being
a performance penalty (due to using an emulated NIC) during the
migration.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The tests prefixed default-video* were enabled only for the xml2xml
testing and used impossible configurations.
Enable them for xml2argv testing fix them:
1) aarch64: remove pointless cpu mode
2) s390x: remove pointless cpu and use existing machine type
3) riscv: remove pointless cpu
4) x86: remove pointless cpu and use existing machine type
5) ppc65: use correct machine type and enable USB
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
XML->XML testing uses DO_TEST_CAPS_LATEST so use it also for the
XML->argv testing. Additionally use the same more modern machine type
in both tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since v4.2-rc0, QEMU introduced a builtin rng backend that uses
getrandom() syscall to generate random. Add it to libvirt with the
backend model 'builtin'.
https://bugzilla.redhat.com/show_bug.cgi?id=1785091
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU since 4.1.0 supports the "dies" parameter for -smp
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit v5.10.0-269-g62065a6cb5 moved NUMA validation code to domain
definition time and appropriately adjusted affected test cases except
for hugepages-default-system-size. And since we don't mock
virGetSystemPageSizeKB in our tests, hugepages-default-system-size test
would fail on architectures (ppc64le) with default page size other than
4KiB.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Eliminate direct use of normal setenv/unsetenv calls in
favour of GLib's wrapper. This eliminates two gnulib
modules
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Previous patch made it possible for the QEMU driver to check if
a given PCI hostdev is unassigned, by checking if dev->info->type is
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_UNASSIGNED, meaning that this device
shouldn't be part of the actual guest launch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now, that we have everything prepared, we can generate command
line for NVMe disks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Move the pcihole64 validation being done by
qemuBuildGlobalControllerCommandLine() to the existing function
qemuDomainDeviceDefValidateControllerPCI(), which provides
domain define time validation.
The existing pcihole64 validations in qemu_domain.c were replaced
by the ones moved from qemu_command.c. The reason is that they
are more specific, allowing VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT
and VIR_DOMAIN_CONTROLLER_MODEL_PCIE_ROOT to have distinct validation,
with exclusive QEMU caps and machine types.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the boot validation being done by qemuBuildBootCommandLine()
to to a new qemuDomainDefValidateBoot() function. This new function
is called by qemuDomainDefValidate(), allowing boot validation in
domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the PM validation being done by qemuBuildPMCommandLine() to
to a new qemuDomainDefValidatePM() function. This new function
is called by qemuDomainDefValidate(), promoting PM validation in
domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of qemuBuildHostdevCommandLine() to
qemuDomainDeviceDefValidateHostdev() and qemuDomainMdevDefValidate(),
allowing them to be validated at domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A new qemuDomainDefValidateNuma() function was created to host
all the QEMU caps validation being done inside qemuBuildNumaArgStr().
This new function is called by qemuDomainValidateCpuCount()
to allow NUMA validation in domain define time.
Tests were changed to account for the QEMU capabilities
that need to be present at domain define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduce a new function called qemuDomainDefValidatePSeriesFeature()
that will center all the PSeries validation done in qemu_command.c.
qemuDomainDefValidatePSeriesFeature() is then called during domain
define time, in qemuDomainDefValidateFeatures().
qemuxml2argvtest.c is also changed to include all the caps that now
are being validated in define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Don't check os type / virt type / arch in the post-parse callback
because we can't assume qemuCaps is non-NULL at this point. It
also conceptually belongs to the validation callback.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Avoid grabbing the whole virCapsPtr object when we only need the
host CPU information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the virQEMUCapsPtr objects are just empty. Future patches are
going to expect them to contain real data. Start off by populating the
machine types and arch information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate the need to use virCapsPtr for anything
other than the virConnectGetCapabilies() API impl, cache the host arch
against the QEMU driver struct and use that field directly.
In the tests we move virArchFromHost() globally in testutils.c so that
every test runs with a fixed default architecture reported.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
On Fedora 31 with GCC 9.2.1, compiling qemuxml2argvtest takes
about 36 seconds since
commit 30c6d99209
Author: Jiri Denemark <jdenemar@redhat.com>
Date: Thu Oct 24 17:51:42 2019 +0200
qemuxml2argvtest: Update host arch for DO_TEST*ARCH* tests
The optimizer is hitting some pathological performance behaviour due to
the high number of branches in the mymain() method.
Pushing the branch tests down into the testCompareXMLToArgv method
brings the compile time down to 3 seconds.
This likely related to this GCC bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58479
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The test case for x86_64 and neither cirrus nor vga capability is of the
xml2argv type because it actually fails to parse the XML at all [*] which
is something that xml2xml tests don't seem to handle. xml2argv test fails
to produce a qemu argv for this case which xml2argv tests can handle.
[*] This is a consequence of the decision not to have a fallback if the
obvious choices (cirrus and vga) aren't viable due to missing QEMU caps.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pavel Mores <pmores@redhat.com>
Some of our tests try to validate domain XMLs they are working
with (not intentionally, simply because they call top level
domain XML parse function). Anyway, this implies that we build
domain capabilities also - see
virQEMUDriverGetDomainCapabilities(). And since some domain XMLs
are type of 'kvm' the control gets through
virQEMUCapsFillDomainCaps() and virHostCPUGetKVMMaxVCPUs() to
opening /dev/kvm which may be missing on the machine we're
running 'make check'.
Previously, we did not see this issue, because it was masked. If
building domain capabilities failed for whatever reason, we
ignored the failure. Only v5.9.0-207-gc69e6edea3 uncovered the
problem (it changed reval from 0 to -1 if
virQEMUDriverGetDomainCapabilities() fails). Since the referenced
commit is correct, we need to mock access to /dev/kvm in our
tests.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The 'ramfb' attribute provides a framebuffer to the guest that can be
used as a boot display for the vgpu
For example, the following configuration can be used to provide a vgpu
with a boot display:
<hostdev mode='subsystem' type='mdev' model='vfio-pci' display='on' ramfb='on'>
<source>
<address uuid='$UUID'/>
</source>
</hostdev>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Several tests were not specifying the necessary qemu capabilities for
what they were testing. Due to the way that the video devices are
currently validated, this is not causing any problems. But a change to
video device validation in a following patch would have exposed this
issue and resulted in multiple test failures about the domain
configuration not supporting particular video models.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
We don't allow such config in the schema but the code can handle that so
add a test case supporting it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the occurrences of
ignore_value(VIR_STRDUP(a, b));
with
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This commit adds resolution element with parameters 'x' and 'y' into video
XML domain group definition. Both, properties were added into an element
called 'resolution' and it was added inside 'model' element. They are set
as optional. This element does not follow QEMU properties 'xres' and
'yres' format. Both HTML documentation and schema were changed too. This
commit includes a simple test case to cover resolution for QEMU video
models. The new XML format for resolution looks like:
<model ...>
<resolution x='800' y='600'/>
</model>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the implementation of the ccf-assist pSeries
feature, based on the QEMU_CAPS_MACHINE_PSERIES_CAP_CCF_ASSIST
capability that was added in the previous patch.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This device is a very simple framebuffer device supported by qemu that
is mostly intended to use as a boot framebuffer in conjunction with a
vgpu. However, there is also a standalone ramfb device that can be used
as a primary display device and is useful for e.g. aarch64 guests where
different memory mappings between the host and guest can prevent use of
other devices with framebuffers such as virtio-vga.
https://bugzilla.redhat.com/show_bug.cgi?id=1679680 describes the
issues in more detail.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Commit fb973cfbb4 added versioned test outputs for the above mentioned
tests but didn't actually enable them. Fix that mistake and fix the
output of the tsc-frequency test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The way in which the qemu driver generates aliases for disks involves
ignoring the partition number part of a target dev name. This means that
all partitions of a block device and the device itself all end up with the
same alias. If multiple such disks are specified in XML, the resulting
name clash makes qemu invocation fail.
Since attaching partitions to qemu VMs doesn't seem to make much sense
anyway, disallow partitions in target specifications altogether.
https://bugzilla.redhat.com/show_bug.cgi?id=1346265
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The video private data was not initializing the vhostuser FD
causing us to attempt to close FD 0 many times over.
Fixes
commit ca60ecfa8c
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Mon Sep 23 14:44:36 2019 +0400
qemu: add qemuDomainVideoPrivate
Since the test suite does not invoke qemuExtDevicesStart(), no
vhost_user_fd will be present when generating test XML. To deal
with this we can must a fake FD number. While the current XML
is using FD == 0, we pick a very interesting number that's unlikely
to be a real FD, so that we're more likely to see any mistakes
closing the invalid FD.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Check qemu capability, and accept 3d acceleration. 3d acceleration
support is checked when looking for a suitable vhost-user helper.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The fact that qemu is capable -netdev socket is not enough to
start a migratable domain. It also needs dbus-vmstate capability.
Since there are already some qemu releases which have
net-socket-dgram capability and don't have dbus-vmstate we need
to check for dbus-vmstate.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The OOM handling requires special build time options which we never
enable in our CI. Even once enabled the tests are incredibly slow and
typically require manual inspection of the results to weed out false
positives.
Since there was previous agreement to switch to abort on OOM in libvirt
code, there's no point continuing to keep the unused OOM testing code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If managed='no', then the tap device must already exist, and setting
of MAC address and online status (IFF_UP) is skipped.
NB: we still set IFF_VNET_HDR and IFF_MULTI_QUEUE as appropriate,
because those bits must be properly set in the TUNSETIFF we use to set
the tap device name of the handle we've opened - if IFF_VNET_HDR has
not been set and we set it the request will be honored even when
running libvirtd unprivileged; if IFF_MULTI_QUEUE is requested to be
different than how it was created, that will result in an error from
the kernel. This means that you don't need to pay attention to
IFF_VNET_HDR when creating the tap devices, but you *do* need to set
IFF_MULTI_QUEUE if you're going to use multiple queues for your tap
device.
NB2: /dev/vhost-net normally has permissions 600, so it can't be
opened by an unprivileged process. This would normally cause a warning
message when using a virtio net device from an unprivileged
libvirtd. I've found that setting the permissions for /dev/vhost-net
permits unprivileged libvirtd to use vhost-net for virtio devices, but
have no idea what sort of security implications that has. I haven't
changed libvrit's code to avoid *attempting* to open /dev/vhost-net -
if you are concerned about the security of opening up permissions of
/dev/vhost-net (probably a good idea at least until we ask someone who
knows about the code) then add <driver name='qemu'/> to the interface
definition and you'll avoid the warning message.
Note that virNetDevTapCreate() is the correct function to call in the
case of an existing device, because the same ioctl() that creates a
new tap device will also open an existing tap device.
Resolves: https://bugzilla.redhat.com/1723367 (partially)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are already good number of test cases with hostdevices,
few have multifunction devices but none having more than one
than one multifunction cards.
This patch adds a case where there are two multifunction cards
and two Virtual functions part of the same XML.
0001:01:00.X & 0005:09:00.X - are Multifunction PCI cards.
0000:06:12.[5|6] - are SRIOV Virtual functions
Future commits will improve on automatically detecting the
multifunction cards and auto-assinging the addresses
appropriately.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add support to specify a boot order on vfio-ccw passthrough devices.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Moving the hostdev boot support validation from the command line
generator code into the domain validation code.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Adding a failure test for booting from a vhost scsi hostdev device.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is an inconsistency with VIR_TEST_DEBUG() calls. One half
(roughly) of calls does have the newline character the other one
doesn't. Well, it doesn't have it because it assumed blindly that
new line will be printed, which is not the case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In preparation libtool "-module" flag removal, add lib prefix to all
mock shared objects.
While at it, introduce VIR_TEST_MOCK macros that makes path out of mock
name to be used with VIR_TEST_PRELOAD or VIR_TEST_MAIN_PRELOAD. That,
hopefully, improves readability, reduces line length and allows to
tailor VIR_TEST_MOCK for specific platform if it has shared library
suffix different from ".so".
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
QEMU-4.1 supports 'Direct Mode' for Hyper-V synthetic timers
(hv-stimer-direct CPU flag): Windows guests can request that timer
expiration notifications are delivered as normal interrupts (and not
VMBus messages). This is used by Hyper-V on KVM.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
In particular, use DO_TEST_CAPS_LATEST which tests the canonical
'hv-feature' syntax instead of 'hv_feature' aliases and DO_TEST_CAPS_VER
with 4.0.0 to also test the old syntax.
Suggested-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The pci-assign device is so old school that no one uses it. All
modern systems have adapted VFIO. Switch our xml2argv test too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The QEMU command line does not change when TPM state is encrypted
compared to when it is plain.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
