Libvirt uses the stored alias to detach the TLS x509 object on disk
unplug. As the alias was not stored, the object would not be detached
if unplugging disks after libvirtd restart.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Using 'haveTLS' to do this is pointless if the alias is not set.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we remember the alias we've used to attach the secret objects
we should reuse them rather than trying to infer them from the disk
configuration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previously we did not store the aliases but rather re-generated them
when unplug was necessary. This is very cumbersome since the knowledge
when and which alias to use needs to be stored in the hotplug code as
well.
While this patch will not strictly improve this situation since there
still will be two places containing this code it at least will allow to
remove the mess from the disk-unplug code and will prevent introducing
more mess when adding blockdev support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than trying to figure out which alias was used, store it in the
status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to reference the secret objects by name when hot-unplugging
disks. Don't remove the alias so that it does not need to be
recalculated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's desired to keep the alias around to allow referencing of the secret
object used with qemu. Add set of APIs which will destroy all data
except the alias.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the logic that determines which secret shall be used into the
caller and make this function work only for plain secrets.
This untangles the control flow by only checking relevant data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The encryption secret is setup only for LUKS and thus requires the new
approach. Use qemuDomainSecretInfoNew for initializing it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some code paths can't use the unencrypted secret. Add a helper which
checks and sets up an encrypted secret only and reuse it when setting up
the secret to decrypt the TLS private key in qemuDomainSecretInfoTLSNew.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename it to qemuDomainSecretInfoNewPlain and annotate that it also may
set up a 'plain' secret in some cases. This will eventually be
refactored further.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function checks whether the storage source requires authentication
secret setup. Rename it accordingly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuDomainSecretStorageSourcePrepare in
qemuDomainSecretHostdevPrepare as it uses a virStorageSource to prepare
the authentication secret object data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This helper checks that the vm has the master key setup and libvirt
supports the given encryption algorithm.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Alter qemuBuildVsockDevStr to allow passing a prefix for
the vhostfd file descriptor name. Domain startup uses
the numeric value of fd without a prefix, but hotplug
will need to use a prefix because passed file descriptor
names cannot start with a number.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Split out the device string building to allow reuse for hotplug.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Per-domain log files were introduced in commit a30b08b717. The FILE
objects associated with these log files are stored in a hash table
using domid as a key. When a domain is shutdown, destroyed, or
otherwise powered-off, the FILE object is removed from the hash table,
where the free function will close the FILE.
Unfortunately the call to remove the FILE from the hash table occurs
after setting domid=-1 in the libxlDomainCleanup() function. The
object is never removed from the hash table, the free function is
never called, and the underlying fd is leaked. Fix by removing the
FILE object from the hash table before setting domid=-1.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
My commit b8b42ca added support for formatting the vsock
command line without actually checking if it's supported.
Add it to the per-device validation function.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This has been broken since commit v4.0.0-165-g93412bb827 which added
jobInfo->statsType enum to distinguish various statistics types. During
migration the type will always be QEMU_DOMAIN_JOB_STATS_TYPE_MIGRATION,
however the destination code consuming the statistics data from
migration cookie failed to properly set the type. So even though
everything was filled in, the type remained *_NONE and any attempt to
fetch the statistics data of a completed migration on the destination
host failed.
https://bugzilla.redhat.com/show_bug.cgi?id=1584071
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
To avoid the <source> vs. <target> confusion,
change <source auto='no' cid='3'/> to:
<cid auto='no' address='3'/>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In commit 8bebb2b735 I've refactored how the detach of disk with a
managed persistent reservations object is handled. After the commit if
any disk with a managed PR object would be removed libvirt would also
attempt to remove the shared 'pr-manager-helper' object potentially used
by other disks.
Thankfully this should not have practical impact as qemu should reject
deletion of the object if it was still used and the rest of the code is
correct.
Fix this by removing the disk from the definition earlier and checking
if the shared/managed pr-manager-helper object is still needed.
This basically splits the detach code for the managed PR object from the
unmanaged ones. The same separation will follow for the attachment code
as well as it greatly simplifies -blockdev support for this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When preparing qemuCaps for test cases the following is
happening:
qemuTestParseCapabilitiesArch() is called, which calls
virQEMUCapsLoadCache() which in turn calls
virQEMUCapsInitHostCPUModel() which sets qemuCaps->kvmCPU and
qemuCaps->tcgCPU.
But then the code tries to update the capabilities:
testCompareXMLToArgv() calls testUpdateQEMUCaps() which calls
virQEMUCapsInitHostCPUModel() again overwriting previously
allocated memory. The solution is to free host cpuData in
testUpdateQEMUCaps().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This patch fixes the USB input bus check, the bug was introduced by commit 317badb
Signed-off-by: Xiao Feng Ren <renxiaof@linux.vnet.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
There was a missing enum for mdev causing a strange 'unknown device type'
warning when hot-plugging mdev.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1583927
Signed-off-by: Erik Skultety <eskultet@redhat.com>
We need to free return value of virXPathString().
==12962== 37 bytes in 1 blocks are definitely lost in loss record 156 of 331
==12962== at 0x4C2AF0F: malloc (vg_replace_malloc.c:299)
==12962== by 0x91E8439: strdup (in /lib64/libc-2.25.so)
==12962== by 0x5DBD551: virStrdup (virstring.c:977)
==12962== by 0x5DD3E5E: virXPathString (virxml.c:84)
==12962== by 0x5E178AB: virDomainDefParseXML (domain_conf.c:19110)
==12962== by 0x5E1E985: virDomainDefParseNode (domain_conf.c:20885)
==12962== by 0x5E1E7CB: virDomainDefParse (domain_conf.c:20827)
==12962== by 0x5E1E871: virDomainDefParseFile (domain_conf.c:20853)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introduced by:
commit d4abb7b45d
conf: introduce <vsock> element
commit b8b42ca036
qemu: add support for vhost-vsock-pci
Signed-off-by: Ján Tomko <jtomko@redhat.com>
We allocate a temporary bitmap but never free it.
Introduced by <commit 1f8a1a9>:
qemu: Do not use qemuMonitorSetMigrationCapability
Signed-off-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1560946
Similar to the the Logical backend, use qemu-img on the created
disk partition device to set up for LUKS encryption. Secret mgmt
for the device can be complicated by a reboot possibly changing
the path to the device if the infrastructure changes.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Create a new vsock endpoint by opening /dev/vhost-vsock,
set the requested CID via ioctl (or assign a free one if auto='yes'),
pass the file descriptor to QEMU and build the command line.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
A file for vsock-related helper functions.
virVsockSetGuestCid to set an already-known CID,
virVsockAcquireGuestCid that will use the first available CID
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add a new 'vsock' element for the vsock device.
The 'model' attribute is optional.
A <source cid> subelement should be used to specify the guest cid,
or <source auto='yes'/> should be used.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
A type to represent the new vsock device.
Also implement an allocation function to allow future addition
of private data.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Remove the locks since they are unnecessary and would cause
a hang for a driver reload/restart when a transient pool was
previously active as a result of the call:
virStoragePoolUpdateInactive:
...
if (!virStoragePoolObjGetConfigFile(obj)) {
virStoragePoolObjRemove(driver->pools, obj);
...
stack trace:
Thread 17 (Thread 0x7fffcc574700 (LWP 12465)):
...pthread_rwlock_wrlock
...virRWLockWrite
...virObjectRWLockWrite
...virStoragePoolObjRemove
...virStoragePoolUpdateInactive
...storagePoolUpdateStateCallback
...virStoragePoolObjListForEachCb
...virHashForEach
...virStoragePoolObjListForEach
...storagePoolUpdateAllState
...storageStateInitialize
...virStateInitialize
...daemonRunStateInit
...virThreadHelper
...start_thread
...clone
Introduced by commit id 4b2e0ed6e3.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
When status XML was parsed the post-parse callbacks could not access
qemu caps and potentially upgrade the definition according to the
present caps. Implement the callback to pass it in.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The status XML parser function virDomainObjParseXML could not pass in
parseOpaque into the post parse callbacks. Add a callback which will
allow hypervisor drivers to fill it from the 'virDomainObj' data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When parsing status XML the post-parse callbacks can't access any
private data present in the status XML as the private bits were parsed
after invoking post-parse callbacks.
Move the invocation so that everything is parsed first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Its only use is now to check for duplicate boot order values,
which is now also done in virDomainDefPostParseCommon.
Remove it completely.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
As the function signature of virDomainDefPostParseInternal does not
differ from virDomainDefPostParse now, the wrapper can be dropped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Move the check for boot elements into a separate function
and remove its dependency on the parser-supplied bootHash table.
Reconstructing the hash table from the domain definition
effectively duplicates the check for duplicate boot order
values, also present in virDomainDeviceBootParseXML.
Now it will also be run on domains created by other means than XML
parsing, since it will be run even for code paths that did not supply
the bootHash table before.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Further patches will introduce validation and a default setting
of def->os.bootDevs in postParse.
Introduce a feature flag to opt out of this and set it in the vmx
driver, otherwise we would be adding it <boot dev='hd'/> into every
vmx config despite having no way to change it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Trying to set any cache for <disk device='lun'/> makes no sense.
Such disk translates into -device scsi-block on the command line
and the device lacks any cache setting because it's merely a
middle man between qemu and real SCSI device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The function creates a list of all (or migratable only) CPU features
supported by QEMU. It works by looking at the CPU model info returned by
query-cpu-model-expansion QMP command.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
When computing a baseline CPU for a specific hypervisor we have to make
sure to include only CPU features supported by the hypervisor. Otherwise
the computed CPU could not be used for starting a new domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
To make it more consistent with the rest of the CPU driver code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
This is required for virCPUBaseline to accept a list of guest CPU
definitions since they do not have arch set.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Modern host CPU models from domain capabilities XMLs are reported as
guest CPU definitions with feature policies. This patch updates
virCPUx86Baseline to properly handle such CPU models.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new API computes the most feature-rich CPU which is compatible with
all given CPUs and can be provided by the specified hypervisor. It is a
more useful version of virConnectBaselineCPU, which doesn't consider any
hypervisor capabilities when computing the best CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
This new API compares the given CPU description with the CPU the
specified hypervisor is able to provide on the host. It is a more useful
version of virConnectCompareCPU, which compares the CPU definition with
the host CPU without considering any specific hypervisor and its
abilities.
https://bugzilla.redhat.com/show_bug.cgi?id=1559832https://bugzilla.redhat.com/show_bug.cgi?id=1559835
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
virConnectGetDomainCapabilities needs to lookup QEMU capabilities
matching a specified binary, architecture, virt type, and machine type
while using default values when any of the parameters are not provided
by the user. Let's extract the lookup code into
virQEMUCapsCacheLookupDefault to make it reusable.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virDomainDetachDeviceAlias API is designed so that it only
sends detach request to qemu. It's user's responsibility to wait
for DEVICE_DELETED event, not libvirt's. Add @async flag to
qemuDomainDetach*Device() functions so that caller can chose if
detach is semi-synchronous (old virDomainDetachDeviceFlags()) or
fully asynchronous (new virDomainDetachDeviceFlags()).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The fact that we are overwriting @ret multiple times makes it
difficult to see what is actually happening here. Follow our
traditional pattern where @ret is initialized to -1, and set to 0
only in case we know we succeeded.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Funny, we obtain driver caps at the beginning of the function,
but then for unknown reason access driver->caps directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We are overwriting @ret a lot. It makes hard to see what is
actually going on. Use more gotos. Two functions are fixed here:
qemuDomainDetachShmemDevice() and qemuDomainDetachWatchdog().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On watchdog unplug, when qemu doesn't support DEVICE_DELETED event
(or couple of other reasons) we do two things:
1) release watchdog device address,
2) call qemuDomainRemoveWatchdog() which does 1) again.
This is potentially dangerous.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On shmem unplug, when qemu doesn't support DEVICE_DELETED event
(or couple of other reasons) we do two things:
1) release shmem device address,
2) call qemuDomainRemoveShmemDevice() which does 1) again.
This is potentially dangerous.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of releasing address only sometimes in
qemuDomainDetachChrDevice() let's release it whenever the device
is actually removed from the domain definition.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When detaching a device it can be uniquely identified by its
alias. Instead of misusing virDomainDetachDeviceFlags which has
the same signature introduce new function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1400475
In order to avoid a possible error as a result of kernel interactions
with the partition helper, let's use virWaitForDevices to force things
to settle down before attempting to open and read the partition. This
is related to https://bugzilla.redhat.com/show_bug.cgi?id=1264719.
Although perhaps overkill to have too many places to settle, since
we know that the act of reading the partitions via libvirt_parthelper
will cause udev activity/events - we just need to ensure udev has
been settled before proceding with usage of the device.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Report domaincaps <features><genid supported='yes'/> if the guest
config accepts <genid/> or <genid>$GUID</genid>.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1149445
If the domain requests usage of the genid functionality,
then add the QEMU '-device vmgenid' to the command line
providing either the supplied or generated GUID value.
Add tests for both a generated and supplied GUID value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Before we generate the command line for qemu, if the domain about to
be launched desires to utilize the VM Generation ID functionality, then
handle both the regenerating the GUID value for backup recovery (restore
operation) and the startup after snapshot as both require a new GUID to
be generated to allow the guest operating system to recognize the VM
is re-executing something that has already executed before.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Add the query of the device objects for the vmgenid device
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The VM Generation ID is a mechanism to provide a unique 128-bit,
cryptographically random, and integer value identifier known as
the GUID (Globally Unique Identifier) to the guest OS. The value
is used to help notify the guest operating system when the virtual
machine is executed with a different configuration.
This patch adds support for a new "genid" XML element similar to
the "uuid" element. The "genid" element can have two forms "<genid/>"
or "<genid>$GUID</genid>". If the $GUID is not provided, libvirt
will generate one and save it in the XML.
Since adding support for a generated GUID (or UUID like) value to
be displayed modifying the xml2xml test to include virrandommock.so
is necessary since it will generate a "known" value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Rather than a lot of checks use a switch statement. This optimizes the
code as if one device is matched the rest will certainly not match.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Later on, more stuff will be added so prevent the main function growing
out of control.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After the text monitor was deleted this event can't be triggered.
Remove it and all the unnecessary code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Drop all conditional calls which have JSON variants, now that we
guarantee JSON monitor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu did not QAPIfy these and the design and name will most probably
change. The replacements will not be compatible. Drop the JSON stubs and
annotate that there won't be a replacement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are no callers for these. Remove them and the monitor
implementations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QMP version was added in qemu commit e4c8f004c55d9da3eae3e14 which
is included in v1.3.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QMP version was added in qemu commit ab49ab5c488237f3656689 which
is included in v1.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Implement the secure way to transport non-shared storage data across
migrations. The new approach uses blockdev-add to create the NBD client
so that the TLS secret object can be specified.
https://bugzilla.redhat.com/show_bug.cgi?id=1300772
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Separate the code relevant for this approach so that we can later add a
second implementation without making the function messy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Drop the mention of 'drive mirror' from the function names and mention
NBD. This will help when adding the 'blockdev mirror' migration code
which will allow using TLS.
Additionally fix some of the function comments to make more sense
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Allow saving various aspects necessary to do NBD migration via blockdev
by storing a 'virStorageSource' in the disk private data meant to store
the NBD target of migration. Along with this add code to parse and
format it into the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Extract the NBD portion of the 'job' status XML element parser into a
separate function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We will be adding source data to it so extract it to a separate function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
These helpers add infrastructure which simplifies adding and rolling
back virStorageSources to a running qemu instance. Using of the helper
structure and separate functions allows for a much cleaner code in the
section dealing with the monitor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
drive-mirror allows only file targets. Introduce support for
blockdev-mirror that is able to copy to any BDS described by a node name
in qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Move formatting of the qemu command out of qemuMonitorJSONMakeCommandRaw
to qemuMonitorJSONMakeCommandInternal to allow greater reusability and
document the function better.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The capability also represents that 'blockdev-add' is functional. It's
necessary to detect it via presence of 'blockdev-del' since blockdev-add
did not have the unsupported 'x-blockdev-add' version previously and
thus would be marked as present even if we could not use it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The initiation of a synchronous block job in the NBD storage migration
code was placed after entering the monitor thus after the lock on the VM
object was unlocked. Thankfully nothing bad could happen in this
situation since the migration job prevents any disk detaches or other
modifications of the domain object.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It will be used when parsing the migration private data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reference the storage via node name rather than inlining it. This is
the approach that will be used with -blockdev/blockdev-add since it
allows more control and is more future proof.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduce support for codec type 'output' ('hda-output' in QEMU) for ich6
and ich9 sound devices, which only advertises a line-out in the guest.
This has been available in QEMU since 0.14.
Signed-off-by: Filip Alac <filipalac@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This way we don't rely on QEMU supplying the -sandbox option
without CONFIG_SECCOMP.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit 766d5c1b deprecated the capability, because we were assuming
it for every QEMU binary. At the time of the introduction, there
was no way to probe for this via QMP.
However since QEMU 1.5.0 (which is the earliest version we support)
we can rely on the query-command-line-options command to detect this
feature.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1534418
Just like ec982f6d92 denies hugepages for non-existent
guest NUMA nodes in case there are some nodes configured.
Unfortunately, when there are none, qemuBuildNumaArgStr() is not
called and thus we have to have check in qemuBuildMemPathStr()
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Some AMD processors only support a non-architectural means of
enabling Speculative Store Bypass Disable. To allow simplified
handling in virtual environments, hypervisors will expose an
architectural definition through CPUID bit 0x80000008_EBX[25].
This needs to be exposed to guest OS running on AMD x86 hosts to
allow them to protect against CVE-2018-3639.
Note that since this CPUID bit won't be present in the host CPUID
results on physical hosts, it will not be enabled automatically
in guests configured with "host-model" CPU unless using QEMU
version >= 2.9.0. Thus for older versions of QEMU, this feature
must be manually enabled using policy=force. Guests using the
"host-passthrough" CPU mode do not need special handling.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
New microcode introduces the "Speculative Store Bypass Disable"
CPUID feature bit. This needs to be exposed to guest OS to allow
them to protect against CVE-2018-3639.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We currently print the libvirt and qemu version strings into the
per-guest logfile. It would be useful to know what kernel is running
too, so add that.
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The last caller not passing a comma was removed by:
commit ad8a7c4f85
Author: Ján Tomko <jtomko@redhat.com>
CommitDate: 2018-04-12 17:17:16 +0200
qemu: deprecate QEMU_CAPS_NETDEV
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The JSON property generator should not escape commas as we do on the
command line. The JSON->commandline generator already does that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the 'S' modifier for create the field optionally rather than calling
another JSON formatter function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
According to virDomainScreenshot() documentation, screens are
numbered sequentially. e.g. having two graphics cards, both with
four heads, screen ID 5 addresses the second head on the second
card.
But apart from that, there's nothing special happening here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As of v2.12.0-rc0~32^2 QEMU is capable specifying which display
device and head should the screendump be taken from. Track this
capability so that we can use it later in our virDomainScreenshot
API.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit [1] dropped support for synchronous block job cancel.
This patch erases remnants from comments.
[1] commit 2350d101 "qemu: Remove support for legacy block jobs"
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Historically we matched log filters with strstr(), and when switching to
fnmatch in cbb0fd3cfd, it was stated that
we would continue to match substrings, with "foo" being equivalent to
"*foo*". Unfortuntely I forget to provide the code to actually make that
happen. This fixes it to prepend and append "*". We don't bother to
check if the pattern already has a leading/trailing '*', because
"**foo**" will match the same as "*foo*".
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
virCryptoHashString also needs to know the size of the returned hash.
Return it if the hash conversion succeeded so the caller does not need
to access the hashinfo array.
This should make virCryptoHashString build without gnutls.
Also fixes the missing return value for the virCryptoHashBuf stub.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Suggested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
==1589== 7 bytes in 2 blocks are definitely lost in loss record 34 of 261
==1589== at 0x4C2AF0F: malloc (vg_replace_malloc.c:299)
==1589== by 0x8A82794: xmlStrndup (in /usr/lib64/libxml2.so.2.9.8)
==1589== by 0x5DD8392: virXMLPropString (virxml.c:510)
==1589== by 0x5E12427: virDomainMemoryDefParseXML (domain_conf.c:15704)
==1589== by 0x5E207DE: virDomainDefParseXML (domain_conf.c:20351)
==1589== by 0x5E2184F: virDomainDefParseNode (domain_conf.c:20636)
==1589== by 0x5E216A1: virDomainDefParse (domain_conf.c:20580)
==1589== by 0x5E21747: virDomainDefParseFile (domain_conf.c:20606)
==1589== by 0x112F5F: testCompareXMLToArgv (qemuxml2argvtest.c:493)
==1589== by 0x138780: virTestRun (testutils.c:180)
==1589== by 0x117129: mymain (qemuxml2argvtest.c:937)
==1589== by 0x13A83C: virTestMain (testutils.c:1120)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Libvirt only manages one PR daemon. This means that we don't need to
pass the 'disk' object and also rename the functions dealing with this
so that it's obvious we only deal with the managed PR daemon.
Signed-off-by: Peter Krempa <pkrempa@redhat st.com>
Rather than always checking which path to use pre-assign it when
preparing storage source.
This reduces the need to pass 'vm' around too much. For later use the
path can be retrieved from the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
To allow storing status information in the XML move the validation that
the 'path' is not valid for managed PR daemon case into
qemuDomainValidateStorageSource and allow parsing of the data even in
case when managed='yes'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Everything can be disabled by not using the parent element. There's no
need to store this explicitly. Additionally it does not add any value
since any configuration is dropped if enabled='no' is configured.
Drop the attribute and adjust the code accordingly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Disk source definition should be validated in
qemuDomainValidateStorageSource rather than in individual generators of
command line arguments.
Change to the XML2XML test is required since now the definition is
actually validated at define time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
For use with blockdev the PR manager will be bound to a virStorageSource
rather than a virDomainDiskDef, so we will need to use the correct
alias.
Allow passing a string rather than the whole disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Extract out command line setup and run from storageBackendCreateQemuImg
as we'll need to run it twice soon.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Split up virStorageBackendCreateQemuImgCmdFromVol into two parts.
It's too long anyway and virStorageBackendCreateQemuImgCmdFromVol
should just handle the command line processing.
NB: Requires changing info.* into info->* references.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The only way preallocate could be set is if the info->format was
not RAW (see storageBackendCreateQemuImgSetBacking), so let's just
extract it from the if/else surrounding the application of the
encryption options.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The only way backing_fmts could be set is if the info->format was
not RAW (see storageBackendCreateQemuImgSetBacking), so let's just
extract it from the if/else surrounding the application of the
encryption options.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Remove the "luks" distinction as the code is about to become more
generic and be able to support qcow encryption as well.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move generation of secretPath to storageBackendGenerateSecretData
and simplify a bit since we know vol->target.encryption is set plus
we have a local @enc.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than having storageBackendCreateQemuImgCheckEncryption
perform the virStorageGenerateQcowEncryption, let's just do that
earlier during storageBackendCreateQemuImg so that the check
helper is just a check helper rather doing something different
based on whether the format is qcow[2] or raw based encryption.
This fixes an issue in the storageBackendResizeQemuImg processing
for qcow encryption where if a secret was not available for a
volume, a new secret will not be generated and instead an error
message will be generated.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit id 'a48c71411' altered the logic a bit and didn't
remove an unnecessary check as info.encryption is true when
vol->target.encryption != NULL, so if we enter the if segment
with info.format == VIR_STORAGE_FILE_RAW && vol->target.encryption
!= NULL, then there's no way info.encryption could be false.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Support OpenGL when using SDL backend via -sdl,gl=on. Add associated
tests.
NB: Usage of DO_TEST_CAPS_LATEST in qemuxml2argv doesn't work in
this case because -sdl gl is not introspectable.
Signed-off-by: Maciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Support OpenGL acceleration capability when using SDL graphics.
Signed-off-by: Maciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Support OpenGL accelerated rendering when using SDL graphics in the
domain config. Add associated test and documentation.
Signed-off-by: Maciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Create a function called `qemuBuildGraphicsSDLCommandLine` which is
called from qemuBuildGraphicsCommandLine.
Signed-off-by: Maciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It only accepts a virObjecLockable, not a virObjecRWLockable
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
libxlDoDomainSave() is used in both the save and managedsave code
paths but was unconditionally setting hasManagedSave to true on
success. As a result, undefine would fail after a non-managed
save/restore operation. E.g.
virsh define; virsh start
virsh save; virsh restore
virsh shutdown
virsh undefine
error: Refusing to undefine while domain managed save image exists
Modify libxlDoDomainSave() to take an additional parameter to
specify managed vs non-managed save, and change callers to use it.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Parser assumed extra was always present when root was specified.
Fixed by handling root and extra separately.
Signed-off-by: Filip Alac <filipalac@gmail.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Generates the QEMU command line for the vfio-ccw device.
Adds various functionality testing for vfio-ccw in libvirt:
1. Generation of QEMU command line from domain xml file
2. Generation of dump xml from domain xml file
3. Checks duplicate/invalid addresses for vfio-ccw devices.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduces the vfio-ccw model for mediated devices and prime vfio-ccw
devices such that CCW address will be generated.
Alters the qemuxml2xmltest for testing a basic mdev device using vfio-ccw.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add the function virHostdevIsMdevDevice() which detects whether a
hostdev is a mediated device or not. Also, replace all existing
conditionals.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Let us introduce the capability vfio-ccw for supporting the basic
channel I/O passthrough, which have been introduced in QEMU 2.10. The
current focus is to support dasd-eckd (cu_type/dev_type = 0x3990/0x3390)
as the target device.
Let us also introduce the capability QEMU_CAPS_CCW_CSSID_UNRESTRICTED
for virtual-css-bridge. This capability is based on the
cssid-unrestricted property which exists if QEMU no longer enforces
cssid restrictions based on ccw device types.
Vfio-ccw capability is dependent on the hidden virtual-css-bridge, so
that we are able to probe for the cssid-unrestriced property to make
sure the devices are visible to non-mcss-e enabled guests.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Let us introduce the capability QEMU_CAPS_CCW for virtual-css-bridge
and replace QEMU_CAPS_VIRTIO_CCW with QEMU_CAPS_CCW in code segments
which identify support for ccw devices.
The virtual-css-bridge is part of the ccw support introduced in QEMU 2.7.
The QEMU_CAPS_CCW capability is based on the existence of the QEMU type.
Let us also add the capability QEMU_CAPS_CCW to the tests which
require support for ccw devices.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Ditch the use of gnulib's digest functions in favor of GnuTLS,
which might be more likely to get FIPS-certified.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
A function that keeps the hash in binary form instead of converting
it to human-readable hexadecimal form.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The callers needing to know the size of the resulting digest
rely on _DIGEST_SIZE constants from gnulib.
Introduce VIR_CRYPTO_HASH_SIZE_ constants to remove the dependency.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1480668
QEMU has this new feature memory-backend-file.discard-data=yes
which is a nifty optimization. Basically, when qemu is quitting
or on memory hotplug it calls munmap() and close() on the file
that is backing the memory. However, this does not mean kernel
won't stop touching that part of memory. It still might. With
this feature enabled we tell kernel: "we don't need this memory
nor data stored in it". This makes kernel drop the memory
immediately without trying to sync memory with the mapped file.
Unfortunately, this cannot be turned on by default because we
can't be sure when users really don't care about what happens to
data after qemu dies. So it has to be opt-in. As usual, there are
three places where one can configure memory attributes. This
patch adds the feature to all of them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU has possibility to call madvise(.., MADV_REMOVE) in some
cases. Expose this feature to users by new element/attribute
discard.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
At the same time convert the code to use virXMLFormatElement.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability tracks if memory-backend-file has discard-data
attribute or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability tracks if qemu has "qom-list-properties" monitor
command.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we've gotten rid of misleading names we can introduce
qemuMonitorGetObjectProps() function which queries -object
properties. Again, some parts of code can be reused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code that processes list of device properties is going to be
reused. Therefore put it into a separate function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The <memoryBacking><locked/></memoryBacking> element will now pass the
wired (-S) flag to the bhyve command.
Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Strongly recommend against use of the log_levels setting since it
creates overly verbose logs and has a serious performance impact.
Describe the log filter syntax better and mention use of shell
glob syntax. Also provide more realistic example of good settings
to use. The libvirtd example is biased towards QEMU, but when the
drivers split off each daemon can get its own more appropriate
example.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Rather than specialcasing handling of the '*' character, use fnmatch()
to get normal shell wildcard syntax, as described in 'man glob(7)'.
To get an indication of the performance impact of using globs instead
of plain string matches, a test program was written. The list of all
260 log categories was extracted from the source. Then a typical log
filters setup was picked by creating an array of the strings "qemu",
"security", "util", "cgroup", "event", "object". Every filter string
was matched against every log category. Timing information showed that
using strstr() this took 8 microseconds, while fnmatch() took 114
microseconds.
IOW, fnmatch is 14 times slower than our existing strstr check. These
numbers show a worst case scenario that will never be hit, because it
is rare that every log category would have data output. The log category
matches are cached, so each category is only checked once no matter how
many log statements are emitted. IOW despite being slower, this will
be lost in the noise and have no consequence on real world logging
performance.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There's this macro virBufferSetChildIndent which sets offset of
child buffer from given parent buffer. However, it is calling
virBufferAdjustIndent() which only adds adjustment instead of
calling virBufferSetIndent() which clears out any adjustment
previously set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After version 0.7.5, libssh deprecated the function scope
ssh_get_publickey() and moved to ssh_get_server_publickey(). So, Libvirt
is failing to compile using this new function name.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
If we are the last one to use pr-manager object we need to remove
it and also kill the qemu-pr-helper process.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When attaching a disk that requires pr-manager we might need to
plug the pr-manager object and start the pr-helper process.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Before we exec() qemu we have to spawn pr-helper processes for
all managed reservations (well, technically there can only one).
The only caveat there is that we should place the process into
the same namespace and cgroup as qemu (so that it shares the same
view of the system). But we can do that only after we've forked.
That means calling the setup function between fork() and exec().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Just like we allow users overriding path to bridge-helper
detected at compile time we can allow them to override path to
qemu-pr-helper.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Just like in previous commit, qemu-pr-helper might want to open
/dev/mapper/control under certain circumstances. Therefore we
have to allow it in cgroups.
The change virdevmapper.c might look spurious but it isn't. After
6dd84f6850 any path that we're allowing in deivces CGroup is
subject to virDevMapperGetTargets() inspection. And libdevmapper
returns ENXIO for the path from subject.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If qemu-pr-helper is compiled with multipath support the first
thing it does is open /dev/mapper/control. Since we're going
to be running it inside qemu namespace we need to create it
there. Unfortunately, we don't know if it was compiled with or
without multipath so we have to create it anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
For command line we need two things:
1) -object pr-manager-helper,id=$alias,path=$socketPath
2) -drive file.pr-manager=$alias
In -object pr-manager-helper we tell qemu which socket to connect
to, then in -drive file-pr-manager we just reference the object
the drive in question should use.
For managed PR helper the alias is always "pr-helper0" and socket
path "${vm->priv->libDir}/pr-helper0.sock".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The capability tracks if qemu has pr-manager-helper object. At
this time don't actually detect if qemu has the capability. Not
just yet. Only after the code is written the feature will be
enabled.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Couple of reasons for that:
a) there's no monitor command to change path where the pr-helper
connects to, or
b) there's no monitor command to introduce a new pr-helper for a
disk that already exists.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This is a definition that holds information on SCSI persistent
reservation settings. The XML part looks like this:
<reservations enabled='yes' managed='no'>
<source type='unix' path='/path/to/qemu-pr-helper.sock' mode='client'/>
</reservations>
If @managed is set to 'yes' then the <source/> is not parsed.
This design was agreed on here:
https://www.redhat.com/archives/libvir-list/2017-November/msg01005.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Rather than have virJSONValueArraySize return a -1 when the input
is not an array and then splat an error message, let's check for
an array before calling and then change the return to be a size_t
instead of ssize_t.
That means using the helper virJSONValueIsArray as well as using a
more generic error message such as "Malformed <something> array".
In some cases we can remove stack variables and when we cannot,
those variables should be size_t not ssize_t. Alter a few references
of if (!value) to be if (value == 0) instead as well.
Some callers can already assume an array is being worked on based
on the previous call, so there's less to do.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The pointer to the qemu driver is already included in domain object's
private data, so does not need to be passed as yet another parameter
when the domain object is already passed.
Also removes parameter 'driver' from functions which had it just because of
qemuBlockJobUpdate.
Signed-off-by: Roland Schulz <schullzroll@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use the new helper when checking that the VM needs to be tainted as a
host-cdrom passthrough.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
The function will be reused in the test code where we don't care much
that the gluster debug level can't be populated from the qemu config.
Set the level only when 'cfg' is passed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When using blockdev-add and friends, libvirt will need to create also
properties for the qcow2/raw/... format handler in qemu. This patch adds
the infrastructure and implements all formats known to libvirt including
all properties which are expressed at the format level in qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Enabling discard for the storage node allows the format drivers to
discard snapshots and other things, while configuration of the format
layer actually decides whether to actually discard data on request from
the host.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This will be required when doing blockdev-add to conform with the
approach qemu choses to create the disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When used directly with blockdev-add/-blockdev the cache mode will need
to be specified directly for every image rather than just for the disk
itself. This implements the backing options 'direct' and 'no-flush'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
qemu declares node-name as a 32 byte buffer and silently truncates
anything longer than that. This is unacceptable for libvirt, so we need
to make sure that we won't ever supply a node-name exceeding 31 chars.
Add a function which will do the validation and use it to validate
storage-protocol node names.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The gluster protocol in qemu uses two styles, one of which is legacy and
not covered by the QAPI schema.
To allow using of the new style in the blockdev-add code, add a
parameter for qemuBlockStorageSourceGetBackendProps which will switch
between the two modes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Block storage should actually be passed to qemu via 'host_device' or
'host_cdrom' according to the device type. There were no users of this
behaviour so we thankfully can change it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use virFileIsCDROM to detect whether a block device is a cdrom drive and
store it in virStorageSource. This will be necessary to correctly create
the 'host_cdrom' backend in qemu when using -blockdev.
We assume that host_cdrom makes only sense when used directly as a raw
image, but if a backing chain would be put in front of it, libvirt will
use 'host_device' in that case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add detection mechanism which will allow to check whether a path to a
block device is a physical CDROM drive. This will be useful once we will
need to pass it to hypervisors.
The linux implementation uses an ioctl to do the detection, while the
fallback uses a simple string prefix match.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Handle VIR_STORAGE_TYPE_DIR in qemuBlockStorageSourceGetBackendProps so
that a 'vvfat' driver is used, which emulates a FAT filesystem
containing the folders.
qemu requires us to add it as a storage layer, since a 'raw' layer is
usually put on top of it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Move it to the validation callback and make it more robust. This will
also put the checks in the correct place to use with -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add a flag denoting that a virStorageSource is going to be used as a
floppy image. This will be useful in cases where the user passes in
files which shall be exposed as an image to the guest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
'file' backend in qemu supports few more options than the current
implementation. Extract it so that changes don't pollute the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Some properties don't make sense to be configured for every single layer
of the backing chain, but to avoid needing to pass the disk structure we
will copy them to the individual virStorageSource.
Zero detection is applied only for the top layer image, while caching
and iomode for all layers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Few things which are currently stored the virDomainDiskDef structure are
actually relevant for the storage source as well. Add the fields with a
note that they are just mirror of the values from the disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Save and restore node names if we know them or when we will be
generating them in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Everything besides the top of the chain is readonly. Track this when
parsing the XML and detecting the chain from the disk. Also fix the
state when taking snapshots.
All other cases where the top image is changed already preserve the
readonly state from the original image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This capability is unused since we stopped parsing -help output.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The -no-kvm-pit-reinjection option has been deprecated since
its introduction in QEMU 1.3. See commit <1569fa1>.
Drop the capability since all the QEMUs we support allow tuning
the kvm-pit properties via -global.
Also add the QEMU_CAPS_KVM_PIT_TICK_POLICY to the clock-catchup
tests, since expecting it to succeed with QEMU that does not
have kvm-pit makes no sense.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since we started assuming QEMU_CAPS_MACHINE_OPT in
commit <69420756>, this function can only be reached
for unsupported virt types.
Replace the call with a virReportError.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We have been checking whether qemu-img supports the -o compat
option by scraping the -help output.
Since we require QEMU 1.5.0 now and this option was introduced in 1.1,
assume we support it and ditch the help parsing code along with the
extra qemu-img invocation.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When adding a new object to the domain object list, there should
have been 2 virObjectRef calls made one for each list into which
the object was placed to match the 2 virObjectUnref calls that
would occur during Remove as part of virHashRemoveEntry when
virObjectFreeHashData is called when the element is removed from
the hash table as set up in virDomainObjListNew.
Some drivers (libxl, lxc, qemu, and vz) handled this inconsistency
by calling virObjectRef upon successful return from virDomainObjListAdd
in order to use virDomainObjEndAPI when done with the returned @vm.
While others (bhyve, openvz, test, and vmware) handled this via only
calling virObjectUnlock upon successful return from virDomainObjListAdd.
This patch will "unify" the approach to use virDomainObjEndAPI
for any @vm successfully returned from virDomainObjListAdd.
Because list removal is so tightly coupled with list addition,
this patch fixes the list removal algorithm to return the object
as entered - "locked and reffed". This way, the callers can then
decide how to uniformly handle add/remove success and failure.
This removes the onus on the caller to "specially handle" the
@vm during removal processing.
The Add/Remove logic allows for some logic simplification such
as in libxl where we can Remove the @vm directly rather than
needing to set a @remove_dom boolean and removing after the
libxlDomainObjEndJob completes as the @vm is locked/reffed.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since the @dconn reference via args->conn will be used via a thread
or callback, let's make sure memory associated with it isn't free'd
unexpectedly before we use it. The Unref will be done when the object
is Dispose'd.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When adding the @vm to the @args for usage during a thread or
callback, let's add the reference to it at the time of adding to
ensure nothing else deletes it. The corresponding Unref is then
added to the Dispose function.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Rather than open code within virDomainObjListRemove, just call
the *Locked function.
Additionally, add comments to virDomainObjListRemove to describe
the usage model.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use the FindBy{UUID|Name}Locked helpers which will return a locked
and ref counted object rather than the direct virHashLookup and
virObjectLock of the returned object. We'll need to temporarily
virObjectUnref when we assign a new domain @def, but that will
change shortly when virDomainObjListAddObjLocked returns the
correct reference counted object.
Use the virDomainObjEndAPI in the error path to Unref/Unlock for
the corresponding Unref/Unlock of either the FindBy* return or
the virDomainObjNew since both return a reffed/locked object.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Create helpers virDomainObjListFindByUUIDLocked and
virDomainObjListFindByNameLocked to avoid the need
to lock the domain object list leaving that task
for the caller.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This is the old style and we really shouldn't be adding any more
examples like this. Add a comment to warn devs away
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<features><vmcoreinfo/> is a bare boolean XML property. We don't really
use this format anymore and instead prefer tristate <X state=on|off/>
since it's required for modeling on/off/default. If for example future
qemu started enabling vmcoreinfo by default we wouldn't have any way
for the user to turn this off.
Convert it to tristate. For writing XML this is semanticly the same,
<vmcoreinfo/> is processed as <vmcoreinfo state='on'/>.
For apps reading guest XML this is technically an API change,
as they might misinterpret <vmcoreinfo state='off'/>, however this
has only been present in libvirt since 3.10.0 and I don't think any
apps are dependent on this yet
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
