Introduce a small kludge in the parser to avoid unnecessarily
blocking incoming migration from a range of recent libvirt
releases.
https://bugzilla.redhat.com/show_bug.cgi?id=2184966
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The canonical order for <os> child elements is <firmware>
then <loader>.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported qemu versions at this point support both 'qemu-xhci' and
'nec-xhci' controllers. To allow using real capabilities restructure the
tests so that we test both controllers explicitly as well as the
selection of the default model.
Also add a xml2xml test invocation of the unified test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The fake-caps version was kept as an example that the code behaves the
same with real capabilities. Now it's not needed any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With all supported qemu versions we'll pick PCIe to use for the implicit
address busses (those lacking an explicit controller) and thus the
addresses must reflect that.
Update the test to add the new flags, and fix the addresses.
Additionally add a real-caps version of the test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make the output changes of upcoming modernization more visible.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use real caps and clear out flags for PCIe so that we have a real-ish
example of an aarch64 machine using mmio.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test data is effectively identical to the
'aarch64-virtio-pci-default' case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a version for 'latest' caps as well as '4.2.0'. The test
demonstrates that with a real qemu PCIe will be used instead of MMIO.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the two negative cases to use real capapbilities as well as the
positive case for situations when KVM is not used by stripping the
QEMU_CAPS_KVM flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert 'aarch64-gic-default' and 'aarch64-gic-none' cases to use real
capabilities both latest and locked to 4.2.0 to show what would happen
with a real qemu.
Note that the qemuTestSetHostArch() calls are needed as real caps
override the setting once used. Once we convert all tests to real data
this can be dropped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will be modifying the tests for selecting the GIC
version to use real capabilities. This in certain cases will show that a
different version is picked.
Using symlinks makes it inconvenient to do the modifications and
unobvious what changed.
Remove the symlinks and replace them by real output files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the rest of the outstanding tests to use real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use real capabilities for the CPU test. The negative test case for QEMUs
without QEMU_CAPS_QUERY_CPU_MODEL_EXPANSION is removed as the feature is
now supported by all supported qemu versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'hostdev-subsys-mdev-vfio-ccw', 'hostdev-vfio-zpci', and
'hostdev-vfio-zpci-autogenerate-fids' test cases have negative versions
which are invoked without capabilities. This does not make sense going
forward as the tests are going to be switched to real capabilities.
Remove them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the last outstanding test cases for ppc64 to use real
capabilities.
In couple cases this actually fixes the test case to test what it was
intending to do.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of the tested features are always present in the 'pseries' machine
with oldest-supported qemu-4.2, thus the tests don't make sense any
more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add an example case showing that every feature in the 'pseries-features'
test works also with the oldest supported qemu version.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than using fake data and faking the host use the newly introduced
support for test variants to test the OSX HVF qemu version with real
data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than using fake data and faking the host use the newly introduced
support for test variants to test the OSX HVF qemu version with real
data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The changes to the output files are the exact opposite of
those from commit 22207713cf: this is proof that the fix is
working as intended, and that existing domains will keep using
raw firmware images regardless of whether or not qcow2 images
are available on the system and have higher priority.
New domains will keep picking whatever firmware is considered
the preferred one according to the order of descriptors, as
evidenced by the fact that the recently introduced
firmware-auto-efi-abi-update-aarch64 test case is unaffected.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The input is identical to that of the existing
firmware-auto-efi-aarch64 test, but in this case we want to
cover the scenario in which that input is used to define a new
domain rather than loading the definition of an existing domain
from disk.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
libvirt 8.6.0 introduced these checks and very clearly delineated
two possible firmware selection scenarios: manual firmware
selection, where the user is responsible for providing all
information, and firmware autoselection, where a list of desired
features is provided and everything else is handled by libvirt.
In the interest of maintaining the clear separation between these
two scenarios, setting most attributes when firmware autoselection
is active will result in the configuration being rejected.
This works fine, but is unnecessarily restrictive: in most cases,
the additional information that the user has provided matches
the information that libvirt would have discovered on its own by
looking at firmware descriptors, and asking the user to scrub it
from the XML only result in pointless friction.
Remove these checks entirely.
Unsurprisingly, this results in a few test cases that were
rejected until now to suddenly start working and producing
sensible results.
The firmware-auto-efi-loader-path-nonstandard test case is
notable: while we can now enable the xml2xml part of the test,
the xml2argv part is still failing, although in a slightly
different way. This is expected: since the firmware binary is a
non-standard one, libvirt is unable to figure out the missing
information from a firmware descriptor, and the configuration
is still ultimately an invalid one. However, if we were to find
such a configuration on disk at daemon startup, we would not
ignore it completely and instead would offer the user a chance
to fix it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Right now we're checking that firmware descriptor masking works
as intended by creating an empty file matching 60-ovmf-sb.json
in name.
However, that firmware descriptors contains the details for a
perfectly valid and quite common situation: Secure Boot being
supported by the firmware build, but being effectively disabled
by the lack of certificates in the NVRAM template.
Unmask that firmware descriptor, and instead create a dummy one
that has higher priority than all other OVMF builds and points
to paths that are obviously incorrect, which should make it
easy to notice it getting accidentally unmasked in the future.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These cover the same scenarios as the matching test cases for
autoselection.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is identical to the existing
firmware-auto-efi-loader-path-nonstandard test case, but uses
a standard firmware path.
Right now the two test cases behave identically, but that's
going to change in the future.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This test is intended to simulate the use of an OVMF firmware
image installed under a non-standard path. In order to make
such a configuration work, the user would have to provide
additional information.
Right now it doesn't matter, because the configuration is
rejected anyway, but the behavior is going to change slightly
in the future. Prepare by making the configuration more
complete and realistic.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This unifies the naming between the manual and automatic
selection cases, clarifies the contents of the tests and makes
room for more tests being added in the future.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The newly added luks-any rbd encryption format in qemu
allows for opening both LUKS and LUKS2 encryption formats.
This commit enables libvirt uses to use this wildcard format.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This commit enables libvirt users to use layered encryption
of RBD images, using the librbd encryption engine.
This allows opening of an encrypted cloned image
whose parent is encrypted with a possibly different encryption key.
To open such images, multiple encryption secrets are expected
to be defined under the encryption XML tag.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When a thread-context object is specified on the cmd line, then
QEMU spawns a thread and sets its affinity to the list of NUMA
nodes specified in .node-affinity attribute. And this works just
fine, until the main QEMU thread itself is not restricted.
Because of v5.3.0-rc1~18 we restrict the main emulator thread
even before QEMU is executed and thus then it tries to set
affinity of a thread-context thread, it inevitably fails with:
Setting CPU affinity failed: Invalid argument
Now, we could lift the pinning temporarily, let QEMU spawn all
thread-context threads, and enforce pinning again, but that would
require some form of communication with QEMU (maybe -preconfig?).
But that would still be wrong, because it would circumvent
<emulatorpin/>.
Technically speaking, thread-context is an internal
implementation detail of QEMU, and if it weren't for it, the main
emulator thread would be doing the allocation. Therefore, we
should honor the pinning and prune the list of node so that
inaccessible ones are dropped.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2154750
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Since qemuxml2argvtest is now using virnumamock, there's no need
for qemuxml2argvmock to offer reimplementation of virNuma*()
functions. Also, the comment about CLang and FreeBSD (introduced
in v4.3.0-40-g77ac204d14) is no longer true. Looks like noinline
attribute was the missing culprit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
So far, the memory-hotplug-dimm-addr.xml test case pins its vCPUs
onto CPUs 0-1 which correspond to NUMA node #0 (per
tests/vircaps2xmldata/linux-basic/system/node/node0). Place vCPUs
onto nodes #1 and #2 too so that DIMM <memory/> device can
continue using thread-context after future patches. This
configuration, as-is currently, would make QEMU error out anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We have couple of qemuxml2argvtest cases where up to 8 NUMA nodes
are assumed. These are used to check whether disjoint ranges of
host-nodes= is generated properly. Without prejudice to the
generality, we can rewrite corresponding XML files to use up to 4
NUMA nodes and still have disjoint ranges.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Currently it's only possible to set this parameter during domain
creation via QEMU commandline passthrough feature.
With the new delay attribute it's also possible to set this
parameter if you want to attach a new NBD disk
using "virsh attach-device domain device.xml" e.g.:
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='nbd' name='foo'>
<host name='example.org' port='6000'/>
<reconnect delay='10'/>
</source>
<target dev='vdb' bus='virtio'/>
</disk>
Signed-off-by: Christian Nautze <christian.nautze@exoscale.ch>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 54fa1b44af ("conf: Add loadparm boot option for a boot device")
added the ability to specify a loadparm parameter on a <boot/> tag, while
commit 29ba41c2d4 ("qemu: Add loadparm to qemu command line string")
added that value to the QEMU "-machine" command line parameters.
Unfortunately, the latter commit only looked at disks and network
devices for boot information, even though anything with
VIR_DOMAIN_DEF_FORMAT_ALLOW_BOOT could potentially have this tag.
In practice, a <hostdev> tag pointing to a passthrough (SCSI or DASD)
disk device can be used in this way, which means the loadparm is
accepted, but not given to QEMU.
Correct this, and add some XML/argv tests.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This can improve performance for some guests since it reduces copying of
display data between host and guest. Requires udmabuf on the host.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 24cc9cda82 switched over to use -machine hpet, but one of the
steps it did was to clear the QEMU_CAPS_NO_HPET capability.
The validation check still uses the old capability though which means
that for configs which would explicitly enable HPET we'd report an error.
Since HPET is an x86(_64) platform specific device, convert the
validation check to an architecture check as all supported qemu versions
actually support it.
Modify a test case to request HPET to catch posible future problems.
Fixes: 24cc9cda82
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemu-system-aarch64' is superset of the soon to be deprecated
'qemu-system-arm' binary. We can move over all of our fake-caps tests to
real caps on aarch64.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We always assert the flag for aarch64 qemus and in qemu the 'aarch64'
cpu property doesn't seem to be optional.
Remove checks and remove impossible test case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the 'ppc-dtb' and 'ppce500-serial' to use real capabilities
albeit captured from a non-native machine. Thus the XML needs to be
converted to use virt type 'qemu'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Preserve testing of the MMIO use case in case when GPEX is complied out
of qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
