Similar to the qemu_tpm.c, add a unit with a few functions to
start/stop and setup the cgroup of the external vhost-user-gpu
process. See function documentation.
The vhost-user connection fd is set on qemuDomainVideoPrivate struct.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
To support virtio VGA with vhost-user, vhost-user-vga device is necessary.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The same validation should be done for both static network devices and
hotplugged devices, but they are currently inconsistent. Move all the
relevant validation from qemuBuildInterfaceCommandLine() into the new
function qemuDomainValidateActualNetDef() and call the latter from
the former.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Let's pull this hunk out into a function, so it can be reused
in another codepath that needs to do the same thing.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
For VM started and migrated/saved without slirp-helpers, let's prevent
the automatic setup (as it would fail to migrate otherwise).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Save & restore the slirp helper PID associated with a network
interface & the probed features.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add dbusVMStates to keep a list of dbus-vmstate objects needed for
migration. They are populated on the command line during start or
qemuDBusVMStateAdd/Remove() will hotplug them as needed.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since libvirt stores the backing chain into the XML in a nested way it
is the prime possibility to hit libxml2's parsing limit of 256 layers.
Introduce code which will crawl the backing chain and verify that it's
not too deep. The maximum nesting is set to 200 layers so that there's
still some space left for additional properties or nesting into snapshot
XMLs.
The check is applied to all disk use cases (starting, hotplug, media
change) as well as block copy which changes image and snapshots.
We simply report an error and refuse the operation.
Without this check a restart of libvirtd would result in the status XML
failing to be parsed and thus losing the VM.
https://bugzilla.redhat.com/show_bug.cgi?id=1524278
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When virtlogd is used to capture QEMU's stdout, qemuDomainObjTaint would
always fail to write the message to the log file when QEMU is already
running (i.e., outside qemuProcessLaunch). This can happen during device
hotplug or by sending a custom QEMU guest agent command:
warning : qemuDomainObjTaint:8757 : Domain id=9 name='blaf'
uuid=9cfa4e37-2930-405b-bcb4-faac1829dad8 is tainted:
custom-ga-command
error : virLogHandlerDomainOpenLogFile:388 : Cannot open log file:
'/var/log/libvirt/qemu/blaf.log': Device or resource busy
error : virNetClientProgramDispatchError:172 : Cannot open log file:
'/var/log/libvirt/qemu/blaf.log': Device or resource busy
The fix is easy, we just need to use the right API for appending a
message to QEMU log file instead of creating a new log context.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A specially crafted XML which would reference a non-existing disk but
request the mirror to be registered with the blockjob could potentially
make the parser dereference NULL. Fix it by moving the code slightly and
just treat it as a wrong job XML. Found by Coverity.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
In addition to the data that libvirt needs and extracts internally,
copy and store the whole 'props' JSON sub-object of the data returned by
query-hotpluggable-cpus for future use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add support to specify a boot order on vfio-ccw passthrough devices.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Refactoring the method signatures in preparation for
checking boot index of the mediated devices.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Changing the error messages to report the problem encountered.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Moving the hostdev boot support validation from the command line
generator code into the domain validation code.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Simplify the command line formatter by complicating the validator.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Store the namespace URI as const char*, instead of in a function.
Suggested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Now that virDomainXMLNamespace matches virXMLNamespace,
we no longer need to keep both around.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Neither the xmlDocPtr nor the root xmlNode (also passed
in the XPathContext) are interesting to the callees.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Implement job handling for the block copy job (drive/blockdev-mirror)
when using -blockdev. In contrast to the previously implemented
blockjobs the block copy job introduces new images to the running qemu
instance, thus requires a bit more handling.
When copying to new images the code now makes use of blockdev-create to
format the images explicitly rather than depending on automagic qemu
behaviour.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU finally exposes an interface which allows us to instruct it to
format or create arbitrary images. This is required for blockdev
integration of block copy and snapshots as we need to pre-format images
prior to use with blockdev-add.
This path introduces job handling and also helpers for formatting and
attaching a whole image described by a virStorageSource.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit 3f93884a4d where the job handling of commit jobs with
blockdev was added I've forgot to add a 'break' in the switch fomatting
the status XML. Thankfully this would not be a problem as the cases
where this fell through didn't have any code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The utility of the function is extremely limited as for block copy
we need to register the mirror chain earlier than when it's set with the
disk. This means that it would be open-coded in that case.
Avoid any weird usage and just open-code the only current usage, remove
the function, and reword the docs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename qemuDomainObjPrivateXMLFormatBlockjobFormatChain to
qemuDomainObjPrivateXMLFormatBlockjobFormatSource and add a 'chain'
parameter which allows controlling whether the backing chain is
formatted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU version 2.12.1 introduced a performance feature under commit
be7773268d98 ("target-i386: add KVM_HINTS_DEDICATED performance hint")
This patch adds a new KVM feature 'hint-dedicated' to set this performance
hint for KVM guests. The feature is off by default.
To enable this hint and have libvirt add "-cpu host,kvm-hint-dedicated=on"
to the QEMU command line, the following XML code needs to be added to the
guest's domain description in conjunction with CPU mode='host-passthrough'.
<features>
<kvm>
<hint-dedicated state='on'/>
</kvm>
</features>
...
<cpu mode='host-passthrough ... />
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU shows a warning message if partial NUMA mapping is set. This patch
adds a warning message in libvirt when editing the XML. It must be an
error in future, when QEMU remove this ability.
Signed-off-by: Maxiwell S. Garcia <maxiwell@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
This patch fixes all paths leading to qemuDomainDefFormatBufInternal.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
This patch fixes all paths leading to qemuDomainDefCopy.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu driver already does some <rng> model validation, based on
qemuCaps. However, the logic for exposing <rng> model values in domcaps
is basically identical. This drops the qemuCaps checking and compares
against the domCaps data directly.
This approach makes it basically impossible to add a new <rng> model to
the qemu driver without extending domcaps. The validation can also
be shared with other drivers eventually.
Reviewed-by: Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Fill in virDomainCaps at Validate time and use it to call
virDomainCapsDeviceDefValidate
Reviewed-by: Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
I find this function more readable if checks for passed storage
source are done first and backing chain is done last. Mixing them
together does not hurt, but is less readable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Time to actually issue the QMP transactions that create and delete
persistent checkpoints, resolving TODOs intentionally left earlier in
the series. For create, we only need one transaction: inside, we
visit all disks affected by the checkpoint, and create a new enabled
bitmap, as well as disabling the bitmap of the first ancestor
checkpoint (if any) that also had a bitmap. For deletion, we need
multiple QMP calls: for each disk, if there is an ancestor checkpoint
with a bitmap, then the bitmap must be merged (including activating
the ancestor bitmap if the leaf node changes), all before deleting the
bitmap from the checkpoint being removed.
Signed-off-by: Eric Blake <eblake@redhat.com>
Qemu bitmap operations require knowing the node name associated with
the format layer (the qcow2 file); as upcoming patches will be
grabbing that information frequently, make a helper function to access
it.
Another potential benefit of this function is that we have a single
place where we could insert a QMP node-name scraping call if we don't
currently know the node name, when -blockdev is not supported;
however, the goal is that we hopefully don't ever have to do that
because we instead scrape node names only at the point where they
change.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A lot of this work heavily copies from the existing snapshot APIs.
What's more, this patch is (intentionally) very similar to the
checkpoint code just added in the test driver, to the point that qemu
checkpoints are not fully usable in this patch, but it at least
bisects and builds cleanly. The separation between patches is done
because the grunt work of saving and restoring XML and tracking
relations between checkpoints is common to the test driver, while the
later patch adding integration with QMP is specific to qemu.
Also note that the interlocking to prevent checkpoints and snapshots
from existing at the same time will be a separate patch, to make it
easier to revert that restriction when we finally round out the design
for supporting interaction between the two concepts.
Signed-off-by: Eric Blake <eblake@redhat.com>
Introduce the handler for finalizing a block commit and active bloc
commit job which will allow to use it with blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce the handler for finalizing a block pull job which will allow
to use it with blockdev.
This patch also contains some additional machinery which is required to
store all the relevant job data in the status XML which will also be
reused with other block job types.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The <mirror> subelement is used in two ways: in a commit job to point to
existing storage, and in a block-copy job to point to additional
storage. We need a way to track only the distinct storage.
This patch introduces qemuBlockJobDiskRegisterMirror which registers the
mirror chain separately only for jobs which require it. This also comes
with remembering that in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
The PR manager is a property of the format layer in qemu so we need to
be able to track it also in the chains of orphaned block jobs.
Add a helper for qemu to look also into the blockjob state.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When the guest unplugs the disk frontend libvirt is responsible for
deleting the backend. Since a blockjob may still have a reference to the
backing chain when it is running we'll have to store the metadata for
the unplugged disk for future reference.
This patch adds 'chain' and 'mirrorChain' fields to 'qemuBlockJobData'
to keep them around with the job along with status XML machinery and
tests. Later patches will then add code to change the ownership of the
chain when unplugging the disk backend.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add support for handling the event either synchronously or
asynchronously using the event thread.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that block job data is stored in the status XML portion we need to
make sure that everything which changes the state also saves the status
XML. The job registering function is used while parsing the status XML
so in that case we need to skip the XML saving.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to store the block job state in the status XML so that we can
properly recover any data when reconnecting after startup and also in
the end to be able to do any transition of the backing chain that
happened while libvirt was not connected to the monitor.
First step is to note the name, type, state and corresponding disk into
the status XML.
We also need to make sure that a broken blockjob does not make libvirt
lose the VM, thus many of the errors just mark the job as invalid.
Later on we'll cancel all invalid jobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Block jobs currently belong to disks only so we can look up the block
job data for them in the corresponding disks. This won't be the case
when using blockdev as certain jobs don't even correspond to a disk and
most of them can run on a part of the backing chain.
Add a global table of blockjobs which can be used to look up the data
for the blockjobs when the job events need to be processed.
The table is a hash table organized by job name and has a reference to
the job. New and running jobs will later be added to this table.
Reference counting will allow to reap job state for synchronous callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
