Commit Graph

38 Commits

Author SHA1 Message Date
Peter Krempa
7938b533d5 cgroup: Prepare for sparse vCPU topologies in virCgroupGetPercpuStats
Pass a bitmap of enabled guest vCPUs to virCgroupGetPercpuStats so that
non-continuous vCPU topologies can be used.
2016-02-08 09:51:34 +01:00
Andrea Bolognani
46468c62ff tests: Rename LIBVIRT_FAKE_SYSFS_DIR to LIBVIRT_FAKE_ROOT_DIR
The old name is no longer accurate, since now we're using its value as
the root of the fake filesystem.

No functional changes.
2015-12-09 15:22:58 +01:00
Ishmanpreet Kaur Khera
32cee5b2f0 Avoid using !STREQ and !STRNEQ
We have macros for both positive and negative string matching.
Therefore there is no need to use !STREQ or !STRNEQ. At the same
time as we are dropping this, new syntax-check rule is
introduced to make sure we won't introduce it again.

Signed-off-by: Ishmanpreet Kaur Khera <khera.ishman@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-10-21 15:03:35 +02:00
John Ferlan
f1a43a0f91 nodeinfo: Add sysfs_prefix to nodeGetCPUCount
Add the sysfs_prefix argument to the call to allow for setting the
path for tests to something other than SYSFS_SYSTEM_PATH.
2015-07-13 15:59:32 -04:00
Cole Robinson
ca32929908 tests: Add virtTestCompareToFile
Replaces a common pattern used in many test files
2015-04-23 17:08:48 -04:00
Eric Blake
9289c85841 tests: fix build on old 32-bit platforms
gcc 4.1.2 (hello RHEL 5) on 32-bit platforms complains:

vircgrouptest.c: In function 'testCgroupGetPercpuStats':
vircgrouptest.c:627: warning: integer constant is too large for 'long' type
vircgrouptest.c:628: warning: this decimal constant is unsigned only in ISO C90
vircgrouptest.c:634: warning: integer constant is too large for 'long' type
vircgrouptest.c:635: warning: this decimal constant is unsigned only in ISO C90
vircgrouptest.c:636: warning: this decimal constant is unsigned only in ISO C90
vircgrouptest.c:644: warning: integer constant is too large for 'long' type

* tests/vircgrouptest.c (testCgroupGetPercpuStats): Use ULL suffix.

Signed-off-by: Eric Blake <eblake@redhat.com>
2015-04-15 12:50:23 -06:00
Michal Privoznik
d65acbde35 vircgroup: Introduce virCgroupControllerAvailable
This new internal API checks if given CGroup controller is
available.  It is going to be needed later when we need to make a
decision whether pin domain memory onto NUMA nodes using cpuset
CGroup controller or using numa_set_membind().

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-04-08 11:54:24 +02:00
Jiri Denemark
2dbfa716e8 tests: Add tests for virCgroupDetectMounts
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2015-03-18 09:53:24 +01:00
Ján Tomko
b54f48812d Fix a memory leak in virCgroupGetPercpuStats
Coverity reports that my commit af1c98e introduced
two memory leaks:
the cpumap if ncpus == 0 in virCgroupGetPercpuStats
and the params array in the test of the function.
2015-01-26 16:13:06 +01:00
Ján Tomko
d66e136bd5 Fix build with older gcc
My commit af1c98e4 broke the build on RHEL-6:
vircgrouptest.c: In function 'testCgroupGetPercpuStats':
vircgrouptest.c:566: error: nested extern declaration of
'_gl_verify_function2' [-Wnested-externs]

The only thing that needs checking is that the array size
is at least EXPECTED_NCPUS, to prevent access beyond the array.

We can ensure the minimum size also by specifying the array
size upfront.
2015-01-23 10:35:20 +01:00
Ján Tomko
af1c98e406 Fix virCgroupGetPercpuStats with non-continuous present CPUs
Per-cpu stats are only shown for present CPUs in the cgroups,
but we were only parsing the largest CPU number from
/sys/devices/system/cpu/present and looking for stats even for
non-present CPUs.
This resulted in:
internal error: cpuacct parse error
2015-01-22 17:01:11 +01:00
Ján Tomko
897808e74f Extend virCgroupGetPercpuStats to fill in vcputime too
Currently, virCgroupGetPercpuStats is only used by the LXC driver,
filling out the CPUTIME stats. qemuDomainGetPercpuStats does this
and also filles out VCPUTIME stats.

Extend virCgroupGetPercpuStats to also report VCPUTIME stats if
nvcpupids is non-zero. In the LXC driver, we don't have cpupids.
In the QEMU driver, there is at least one cpupid for a running domain,
so the behavior shouldn't change for QEMU either.

Also rename getSumVcpuPercpuStats to virCgroupGetPercpuVcpuSum.
2014-04-09 16:24:08 +02:00
Ján Tomko
2dcdb7f654 Indent top-level labels by one space in tests/ 2014-03-25 14:58:41 +01:00
Daniel P. Berrange
2835c1e730 Add virLogSource variables to all source files
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-03-18 14:29:22 +00:00
Martin Kletzander
cc9c62fef9 Require spaces around equality comparisons
Commit a1cbe4b5 added a check for spaces around assignments and this
patch extends it to checks for spaces around '=='.  One exception is
virAssertCmpInt where comma after '==' is acceptable (since it is a
macro and '==' is its argument).

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-03-18 11:29:44 +01:00
Eric Blake
e203bef592 build: fix build on 32-bit hosts
vircgrouptest.c: In function 'testCgroupGetPercpuStats':
vircgrouptest.c:543: warning: integer constatnt is too large for 'long' type

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-02-21 17:21:58 -07:00
Thorsten Behrens
5eb61e6846 Add unit test for virCgroupGetPercpuStats. 2014-02-20 16:20:10 +01:00
Thorsten Behrens
977a187ad7 Add unit test for virCgroupGetMemoryUsage. 2014-02-20 16:20:10 +01:00
Thorsten Behrens
9ce8a7c5c5 Add unit test for virCgroupGetBlkioIo*Serviced 2014-02-20 16:20:09 +01:00
Daniel P. Berrange
eee6eb666c Remove test case average timing
The test case average timing code has not been used by any test
case ever. Delete it to remove complexity.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-10-08 12:39:30 +01:00
Daniel P. Berrange
a48838ad2e Fix launching of VMs on when only logind part of systemd is present
Debian systems may run the 'systemd-logind' daemon, which causes the
/sys/fs/cgroup/systemd  mount to be setup, but no other cgroup
controllers are created. While the LXC driver considers cgroups to
be mandatory, the QEMU driver is supposed to accept them as optional.

We detect whether they are present by looking in /proc/mounts for
any mounts of type 'cgroups', but this is not sufficient. We need to
skip any named mounts (as seen by a name=XXX string in the mount
options), so that we only detect actual resource controllers.

http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=721979

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-09-12 11:32:36 +01:00
Daniel P. Berrange
f0b6d8d472 Fix cgroups when all are mounted on /sys/fs/cgroup
Some users in Ubuntu/Debian seem to have a setup where all the
cgroup controllers are mounted on /sys/fs/cgroup rather than
any /sys/fs/cgroup/<controller> name. In the loop which detects
which controllers are present for a mount point we were modifying
'mnt_dir' field in the 'struct mntent' var, but not always restoring
the original value. This caused detection to break in the all-in-one
mount setup.

Fix that logic bug and add test case coverage for this mount
setup.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-09-11 11:45:38 +01:00
Daniel P. Berrange
aedd46e7e3 Add support for systemd cgroup mount
Systemd uses a named cgroup mount for tracking processes. Add
it as another type of controller, albeit one which we have to
special case in a number of places. In particular we must
never create/delete directories there, nor add tasks. Essentially
the systemd mount is to be considered read-only for libvirt.

With this change both the virCgroupDetectPlacement and
virCgroupCopyPlacement methods must be invoked. The copy
placement method will copy setup for resource controllers
only. The detect placement method will probe for any
named controllers, or resource controllers not already
setup.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-31 19:27:19 +01:00
Daniel P. Berrange
d64e852b5a Remove obsolete cgroups creation apis
The virCgroupNewDomainDriver and virCgroupNewDriver methods
are obsolete now that we can auto-detect existing cgroup
placement. Delete them to reduce code bloat.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-23 22:46:31 +01:00
Daniel P. Berrange
b64dabff27 Report full errors from virCgroupNew*
Instead of returning raw errno values, report full libvirt
errors in virCgroupNew* functions.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-22 13:09:58 +01:00
Daniel P. Berrange
7a1e691711 Convert 'int i' to 'size_t i' in tests/ files
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-10 17:40:13 +01:00
Viktor Mihajlovski
eb21408f44 cgroups: Do not enforce nonexistent controllers
Currently, the controllers argument to virCgroupDetect acts both as
a result filter and a required controller specification, which is
a bit overloaded. If both functionalities are needed, it would be
better to have them seperated into a filter and a requirement mask.
The only situation where it is used today is to ensure that only
CPU related controllers are used for the VCPU directories. But here
we clearly do not want to enforce the existence of cpu, cpuacct and
specifically not cpuset at the same time.
This commit changes the semantics of controllers to "filter only".
Should a required mask ever be needed, more work will have to be done.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-05-24 12:11:24 +02:00
Osier Yang
bb3ea8416b tests/: Remove the whitespace before ";" 2013-05-21 23:41:45 +08:00
Michal Privoznik
e60b9783e1 Adapt to VIR_STRDUP and VIR_STRNDUP in tests/* 2013-05-10 11:54:29 +02:00
Michal Privoznik
7c9a2d88cd virutil: Move string related functions to virstring.c
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
2013-05-02 16:56:55 +02:00
Daniel P. Berrange
f3662737b1 Do proper escaping of cgroup resource partitions
If a user cgroup name begins with "cgroup.", "_" or with any of
the controllers from /proc/cgroups followed by a dot, then they
need to be prefixed with a single underscore. eg if there is
an object "cpu.service", then this would end up as "_cpu.service"
in the cgroup filesystem tree, however, "waldo.service" would
stay "waldo.service", at least as long as nobody comes up with
a cgroup controller called "waldo".

Since we require a '.XXXX' suffix on all partitions, there is
no scope for clashing with the kernel 'tasks' and 'release_agent'
files.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-26 13:52:02 +01:00
Daniel P. Berrange
9ddfe7eea6 Ensure all cgroup partitions have a suffix of ".partition"
If the partition named passed in the XML does not already have
a suffix, ensure it gets a '.partition' added to each component.
The exceptions are /machine, /user and /system which do not need
to have a suffix, since they are fixed partitions at the top
level.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-26 13:52:02 +01:00
Daniel P. Berrange
824e86e723 Change VM cgroup suffix from '{lxc,qemu}.libvirt' to 'libvirt-{lxc,qemu}'
Recently we changed to create VM cgroups with the naming pattern
$VMNAME.$DRIVER.libvirt. Following discussions with the systemd
community it was decided that only having a single '.' in the
names is preferrable. So this changes the naming scheme to be
$VMNAME.libvirt-$DRIVER. eg for LXC 'mycontainer.libvirt-lxc' or
for KVM 'myvm.libvirt-qemu'.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-26 13:52:02 +01:00
Daniel P. Berrange
83336118db Track symlinks for co-mounted cgroup controllers
If a cgroup controller is co-mounted with another, eg

   /sys/fs/cgroup/cpu,cpuacct

Then it is a requirement that there exist symlinks at

   /sys/fs/cgroup/cpu
   /sys/fs/cgroup/cpuacct

pointing to the real mount point. Add support to virCgroupPtr
to detect and track these symlinks

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:32 +01:00
Daniel P. Berrange
767596bdb4 Remove non-functional code for setting up non-root cgroups
The virCgroupNewDriver method had a 'bool privileged' param.
If a false value was ever passed in, it would simply not
work, since non-root users don't have any privileges to create
new cgroups. Just delete this broken code entirely and make
the QEMU driver skip cgroup setup in non-privileged mode

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
aa8604dd45 Add a new virCgroupNewPartition for setting up resource partitions
A resource partition is an absolute cgroup path, ignoring the
current process placement. Expose a virCgroupNewPartition API
for constructing such cgroups

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
8d1c141a8d Refactor cgroups internal data structures
Currently the virCgroupPtr struct contains 3 pieces of
information

 - path - path of the cgroup, relative to current process'
   cgroup placement
 - placement - current process' placement in each controller
 - mounts - mount point of each controller

When reading/writing cgroup settings, the path & placement
strings are combined to form the file path. This approach
only works if we assume all cgroups will be relative to
the current process' cgroup placement.

To allow support for managing cgroups at any place in the
heirarchy a change is needed. The 'placement' data should
reflect the absolute path to the cgroup, and the 'path'
value should no longer be used to form the paths to the
cgroup attribute files.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
d14524701a Add a test suite for cgroups functionality
Some aspects of the cgroups setup / detection code are quite subtle
and easy to break. It would greatly benefit from unit testing, but
this is difficult because the test suite won't have privileges to
play around with cgroups. The solution is to use monkey patching
via LD_PRELOAD to override the fopen, open, mkdir, access functions
to redirect access of cgroups files to some magic stubs in the
test suite.

Using this we provide custom content for the /proc/cgroup and
/proc/self/mounts files which report a fixed cgroup setup. We
then override open/mkdir/access so that access to the cgroups
filesystem gets redirected into files in a temporary directory
tree in the test suite build dir.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00