https://bugzilla.redhat.com/show_bug.cgi?id=1191016
virsh's domdisplay command looks in /domain/devices/graphics/@listen
of the domain's XML for the listen address, however for listen
type='network' (added in libvirt 0.9.4), the <graphics> element
doesn't have a listen attribute, but has a <listen> subelement,
*still* with no address (this is the inactive XML):
<graphics type='spice' autoport='yes' keymap='en-us'>
<listen type='network' network='default'/>
</graphics>
However, at domain start time the <listen> subelement gets its address
attribute filled in once libvirt figures out the IP address associated
with the named network (this is the status XML):
<graphics type='spice' port='5901' autoport='yes' keymap='en-us'>
<listen type='network' address='192.168.122.1' network='default'/>
</graphics>
So in these cases, we need to look at
/domain/devices/graphics/listen/@address instead.
Even though another patch is being pushed that will backfill
listen/@address into @listen, this patch is still useful, as it fixes
domdisplay for cases of a new virsh (with this patch) connecting to a
libvirtd that is newer than 0.9.4 but doesn't have the followup patch.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Laine Stump <laine@laine.org>
In the event we're falling into the code that tries to create the file
in a forked environment (VIR_FILE_OPEN_FORK) we pass different mode bits,
but those are never set because the virFileOpenForceOwnerMode has a check
if the OPEN_FORCE_MODE bit is set before attempting to change the mode.
Since this is a special case it seems reasonable to set u+rw,g+rw,o
Rather than have a dummy waitpid loop and return of the failure status
from recvfd, adjust the logic to save the recvfd error & fd and then
in priority order:
- if waitpid failed, use that errno value
- waitpid succeeded, but if the child exited abnormally, report failure
(use EACCES to report as return failure, since either EACCES or EPERM is
what caused us to fall into the fork+setuid path)
- waitpid succeeded, but if the child reported non-zero status, report
failure (use the errno value that the child encoded into exit status)
- waitpid succeeded, but if recvfd failed, report recvfd_errno
- waitpid and recvfd succeeded, use the fd
NOTE: Original logic to retry the open and force owner mode was
"documented" as only being attempted if we had already tried opening
with the fork+setuid, but checked flags vs. VIR_FILE_OPEN_NOFORK which
is counter to how we would get to that point. So that code was removed.
https://bugzilla.redhat.com/show_bug.cgi?id=1191355
When we attempt to migrate a vm with a migrateuri that has no scheme:
# virsh migrate test4 --live qemu+ssh://lhuang/system --migrateuri 127.0.0.1
target libvirtd will crash because uri->scheme is NULL in
qemuMigrationPrepareDirect on this line:
if (STRNEQ(uri->scheme, "tcp") &&
Add a value check before this line. Also fix a bug like this in
doNativeMigrate, that could only happen when destination libvirtd
returned an incorrect URI.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The function virDomainVcpuPinDel() used vcpupin_list to stand for
def->cputune.vcpupin, which made the codes more readable.
However, in this function, it will realloc vcpupin_list later.
As the definition of realloc(), it may free vcpupin_list and then
points it to a new-realloced address, but def->cputune.vcpupin doesn't
point to the new address(it's freed however).
Thus,
1) When we refer to the def->cputune.vcpupin afterwards, which was freed
by realloc(), an INVALID READ occurs, and libvirtd may crash.
2) As no one will use vcpupin_list any more, and no one frees it(it's just
alloced by realloc()), memory leak occurs.
Part of the valgrind logs are shown as below:
==1837== Thread 15:
==1837== Invalid read of size 8
==1837== at 0x5367337: virDomainDefFormatInternal (domain_conf.c:18392)
which is : virBufferAsprintf(buf, "<vcpupin vcpu='%u' ",
def->cputune.vcpupin[i]->vcpuid);
==1837== by 0x536966C: virDomainObjFormat (domain_conf.c:18970)
==1837== by 0x5369743: virDomainSaveStatus (domain_conf.c:19166)
==1837== by 0x117B26DC: qemuDomainPinVcpuFlags (qemu_driver.c:4586)
==1837== by 0x53EA313: virDomainPinVcpuFlags (libvirt.c:9803)
==1837== by 0x14CB7D: remoteDispatchDomainPinVcpuFlags (remote_dispatch.h:6762)
==1837== by 0x14CC81: remoteDispatchDomainPinVcpuFlagsHelper (remote_dispatch.h:6740)
==1837== by 0x5464C30: virNetServerProgramDispatchCall (virnetserverprogram.c:437)
==1837== by 0x546507A: virNetServerProgramDispatch (virnetserverprogram.c:307)
==1837== by 0x171B83: virNetServerProcessMsg (virnetserver.c:172)
==1837== by 0x171E6E: virNetServerHandleJob (virnetserver.c:193)
==1837== by 0x5318E78: virThreadPoolWorker (virthreadpool.c:145)
==1837== Address 0x12ea2870 is 0 bytes inside a block of size 16 free'd
==1837== at 0x4C291AC: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==1837== by 0x52A3D14: virReallocN (viralloc.c:245)
==1837== by 0x52A3DFB: virShrinkN (viralloc.c:372)
==1837== by 0x52A3F57: virDeleteElementsN (viralloc.c:503)
==1837== by 0x533939E: virDomainVcpuPinDel (domain_conf.c:15405) //doReset为true时才会进到。
==1837== by 0x117B2642: qemuDomainPinVcpuFlags (qemu_driver.c:4573)
==1837== by 0x53EA313: virDomainPinVcpuFlags (libvirt.c:9803)
==1837== by 0x14CB7D: remoteDispatchDomainPinVcpuFlags (remote_dispatch.h:6762)
==1837== by 0x14CC81: remoteDispatchDomainPinVcpuFlagsHelper (remote_dispatch.h:6740)
==1837== by 0x5464C30: virNetServerProgramDispatchCall (virnetserverprogram.c:437)
==1837== by 0x546507A: virNetServerProgramDispatch (virnetserverprogram.c:307)
==1837== by 0x171B83: virNetServerProcessMsg (virnetserver.c:172)
Steps to reproduce the problem:
1) use virDomainPinVcpuFlags() to pin a guest's vcpu to all the pcpus
of the host.
This patch uses def->cputune.vcpupin instead of vcpupin_list to do the
realloc() job, to avoid invalid read or memory leaking.
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: Yue Wenyuan <yuewenyuan@huawei.com@huawei.com>
In our RNG schema we do allow multiple (different) seclabels per-domain,
but don't allow this for devices, yet we neither have a check in our XML parser,
nor in a post-parse callback. In that case we should allow multiple
(different) seclabels for devices as well.
Export the required helpers and add backend code to hotplug RNG devices.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The helpers will be useful when implementing hotplug and coldplug of
random number generator devices.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
As the RNG device is using an -object as backend refactor the code to
use the JSON to commandline generator so that we can reuse the code
later in hotplug.
Move the alias name right after the object type for rng-egd backend so
that we can later use the JSON to commandline generator to create the
command line.
Libvirt didn't prefix the random number generator backend object alias
with any string thus the device alias and object alias were identical.
To avoid possible problems, rename the alias for the backend object and
tweak tests to comply with the change.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Rename qemuBuildRNGDeviceArgs to qemuBuildRNGDevStr and change the
return type so that it can be reused in the device hotplug code later.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This function is used to assign an alias for a RNG device. It will be
later reused when hotplugging RNGs.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When adding devices to the definition it's useful to check whether the
devices don't reside on a conflicting address. This patch adds a helper
that iterates all device info and compares the addresses with the given
info.
Change the wording in the device-address-part of the docmunentation since
the ccw bus address support added to the optional address parameter of
virsh attach-disk for S390.
Signed-off-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Adding ccw bus address support to the optional address parameter of virsh
attach-disk. The format used is ccw:cssid. ssid.devno, e.g.
ccw:0xfe.0x0.0x0201
Virtio-ccw devices must have their cssid set to 0xfe.
Signed-off-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
commit a58e1cb4 didn't fix the bug if the security_default_confined is
not set to 1. We now clean up even if there is no seclabel defined or
the default one.
If you build libvirt with the --no-git option, then gnulib requires
either $GNULIB_SRCDIR in the environment or --gnulib-srcdir on the
command line. But we had not been supporting its use from the
command line. This patch is a bit picky: --gnulib-srcdir must be
passed immediately after --no-git; but since we don't reorder
arguments, and since we already required --no-git to be first to
have any effect, it's not too horrible. It also does the wrong
thing if you include spaces in your arguments, but developers
doing that deserve what they get, right?
Signed-off-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
When defining and creating networks, we have been checking to make
sure there is only a single "default" portgroup, but haven't verified
that no two portgroups have the same name. We *do* check for multiple
definitions when updating the portgroups in an existing network
though.
This patch adds a check to networkValidate(), which is called when a
network is defined or created, to disallow duplicate names. It would
actually make sense to do this in the network XML parser (since it's
not really "something that might make sense but isn't supported by
this driver", but is instead "something that should never be
allowed"), but doing that carries the danger of causing errors when
rereading the config of existing networks when libvirtd is restarted
after an upgrade, and that would result in networks disappearing from
libvirt's list. (I'm thinking I should change the error to "XML_ERROR"
instead of "UNSUPPORTED", even though that's not the type of error
that networkValidate is intended for)
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1115858
It is only usable for NETWORK and BRIDGE type interfaces.
Error out when trying to start a domain where the custom
tap device path is specified for interfaces of other types,
or when the daemon is not privileged.
Note that this cannot be checked at definition time, because
the comparison is against actual type.
https://bugzilla.redhat.com/show_bug.cgi?id=1147195
It is only supported for virtio adapters.
Silently drop it if it was specified for other models,
as is done for other virtio attributes.
Also mention this in the documentation.
https://bugzilla.redhat.com/show_bug.cgi?id=1147195
Return 0 instead of ERR_NO_SUPPORT in each driver
where we don't support managed save or -1 if
the domain does not exist.
This avoids spamming daemon logs when 'virsh dominfo' is run.
https://bugzilla.redhat.com/show_bug.cgi?id=1095637
It is often helpful to know which version of libvirt and QEMU
was present when a guest was first launched. Ensure this info
is written into the QEMU log file for each guest.
Commit id '652a2ec6' introduced two new node device capability flags
and the ability to use those flags as a way to search for a specific
subset of a 'scsi_host' device - namely a 'fc_host' and/or 'vports'.
The code modified the virNodeDeviceCapMatch whichs allows for searching
using the 'virsh nodedev-list [cap]' via virConnectListAllNodeDevices.
However, the original patches did not account for other searches for
the same capability key from virNodeDeviceNumOfCaps and virNodeDeviceListCaps
using nodeDeviceNumOfCaps and nodeDeviceListCaps. Since 'fc_host' and
'vports' are self defined bits of a 'scsi_host' device mere string
comparison against the basic/root type is not sufficient.
This patch adds the check for the 'fc_host' and 'vports' bits within
a 'scsi_host' device and allows the following python code to find the
capabilities for the device:
import libvirt
conn = libvirt.openReadOnly('qemu:///system')
devs = conn.listAllDevices()
for dev in devs:
if 'fc_host' in dev.listCaps() or 'vports' in dev.listCaps():
print dev.name(),dev.numOfCaps(),dev.listCaps()
Commit id '652a2ec6' introduced two new node device capability flags
and the ability to use those flags as a way to search for a specific
subset of a 'scsi_host' device - namely a 'fc_host' and/or 'vports'.
The code modified the virNodeDeviceCapMatch whichs allows for searching
using the 'virsh nodedev-list [cap]' via virConnectListAllNodeDevices.
However, the original patches did not account for other searches for
the same capability key from virNodeListDevices using virNodeDeviceHasCap.
Since 'fc_host' and 'vports' are self defined bits of a 'scsi_host'
device mere string comparison against the basic/root type is not
sufficient.
This patch adds the check for the 'fc_host' and 'vports' bits within
a 'scsi_host' device and allows the following python code to find the
capabilities for the device:
import libvirt
conn = libvirt.openReadOnly('qemu:///system')
fc = conn.listDevices('fc_host', 0)
print(fc)
fc = conn.listDevices('vports', 0)
print(fc)
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Add the missing jump to the error label when the uuid in the
migration cookie XML does not match the uuid of the migrated
domain.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
If a storage file would be backed with a NBD device without path
(nbd://localhost) libvirt would crash when parsing the backing path for
the disk as the URI structure's path element is NULL in such case but
the NBD parser would access it shamelessly.
Add the missing jump to thje error label. The error message shouldn't
ever be triggered though as it's called only on pre-selected nodes.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Add support for --reflink to the virsh 'vol-create-from' and 'vol-clone'
commands to signify usage of the VIR_STORAGE_VOL_CREATE_REFLINK flag in the
ensuing virStorageVolCreateXMLFrom API call.
Updated the man page to describe the new flag.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Commit b38da584 introduced two new functions to get a page size but it
won't work on Windows. We should take care of this.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit e562a61a introduced new function to get/set interface state but
there was misuse of ATTRIBUTE_NONNULL on non-pointer attributes and also
we need to wrap that functions by #ifdef to not break mingw build.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Some code paths have special logic depending on the page size
reported by sysconf, which in turn affects the test results.
We must mock this so tests always have a consistent page size.
e562a61a07 added these two new helper functions and only used them
within virnetdev.c, but declared them in the .h file. If some
currently unsupported interface flags need to be accessed in the
future, it will make more sense to write the appropriate higher level
function rather than require us to artificially define IFF_* on some
mythical platform that doesn't have SIOC[SG]IFFLAGS (and therefore
doesn't have IFF_*) just so we can call virNetDevSetIFFFlags() to
return an error.
To help someone in not going down the wrong road, this patch makes the
two helper functions static, hopefully making it less likely that
someone will want to use them outside of virnetdev.c.
https://bugzilla.redhat.com/show_bug.cgi?id=1176510
When storageDriverAutostart is called path virStateReload via a 'service
libvirtd reload', then because the volume list in the pool wasn't cleared
prior to the call, each volume would be listed multiple times (as many
times as we reload). I believe the issue would be introduced by commit
id '9e093f0b' at least for the libvirtd reload path, although I suppose
the introduction of virStateReload (commit id '70da0494') could be a
different cause.
Thus like other places prior to calling refreshPool, we need to call
virStoragePoolObjClearVols
Change done by commit f309db1f4d wrongly
assumes that qemu can start with a combination of NUMA nodes specified
with the "memdev" option and the appropriate backends, and the legacy
way by specifying only "mem" as a size argument. QEMU rejects such
commandline though:
$ /usr/bin/qemu-system-x86_64 -S -M pc -m 1024 -smp 2 \
-numa node,nodeid=0,cpus=0,mem=256 \
-object memory-backend-ram,id=ram-node1,size=12345 \
-numa node,nodeid=1,cpus=1,memdev=ram-node1
qemu-system-x86_64: -numa node,nodeid=1,cpus=1,memdev=ram-node1: qemu: memdev option must be specified for either all or no nodes
To fix this issue we need to check if any of the nodes requires the new
definition with the backend and if so, then all other nodes have to use
it too.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1182467
With the new JSON to argv formatter we are now able to represent the
memory backend definitions in the JSON object format that is reusable
for monitor use (hotplug) and then convert it into the shell string.
This will avoid having two separate instances of the same code that
would create the different formats.
Previous refactors now allow to make this step without changes to the
test suite.
