It doesn't make sense for non-local sources, since we can't
create or reset the corresponding NVRAM file.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This makes the code more compact and less awkward.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now we just allocate the object, so the only advantage is
that invocations are shorter and look a bit nicer.
Later on, its introduction will pay off by letting us change
things in a single spot instead of all over the library.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move all the boot related parts of qemuDomainDefPostParse()
to a separate helper.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move all the machine type related parts of
qemuDomainDefPostParse() to a separate helper.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting (some) external helpers, callers of
qemuSecurityCommandRun() pass &exitstatus variable, to learn the
exit code of helper process (with qemuTPMEmulatorStart() being
the only exception). Then, if the status wasn't zero they produce
a generic error message, like:
"Starting of helper process failed. exitstatus=%d"
or, in case of qemuPasstStart():
"Could not start 'passt': %s"
This is needless as virCommandRun() (that's called under the
hood), can do both for us, if NULL was passed instead of
@exitstatus. Not only it appends exit status, it also reads
stderr of failed command producing comprehensive error message:
Child process (${args}) unexpected exit status ${exitstatus}: ${stderr}
Therefore, pass NULL everywhere. But in contrast with one of
previous commits which removed @cmdret argument, there could be a
sensible caller which might want to process exit code. So keep
the argument for now and just pass NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every single caller of qemuSecurityCommandRun() calls the
function as:
if (qemuSecurityCommandRun(..., &cmdret) < 0)
goto cleanup;
if (cmdret < 0)
goto cleanup;
(modulo @exitstatus shenanigans)
Well, there's no need for such complication. There isn't a single
caller (and probably will never be (TM)), that would need to
distinguish the reason for the failure. Therefore,
qemuSecurityCommandRun() can be made to pass the retval of
virCommandRun() called under the hood.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The usual pattern when starting a helper daemon is:
if (qemuSecurityCommandRun(..., &exitstatus, &cmdret) < 0)
goto cleanup;
if (cmdret < 0 || exitstatus != 0) {
virReportError();
goto cleanup;
}
The only problem with this pattern is that if virCommandRun()
fails (i.e. cmdret < 0), then proper error was already reported.
But in this pattern we overwrite it (usually with less specific)
error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Way back, in v6.2.0-rc1~67 we removed the code that reads slirp's
stderr on failed startup. However, we forgot to remove
corresponding virCommandSetErrorFD() call and variable
declaration. Do that now.
While this may seem like a step in wrong direction (we should be
reading stderr as it may contain reason for failed start), this
is going to be handled in more general way in next commits.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is used only inside qemu_domain.c, unexport it and move it
above its user.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Originally the code was skipping all repeated taints with the same taint
flag but a logic bug introduced in commit 30626ed15b inverted
the condition. This caused that actually the first occurence was NOT
logged but any subsequent was.
This was noticed when going through oVirt logs as they use custom guest
agent commands and the logs are totally spammed with this message.
Fixes: 30626ed15b
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The 'can-offline' member is optional according to agent's schema and in
fact in certain cases it's not returned. Libvirt then spams the logs
if something is polling the bulk guest stats API.
Noticed when going through oVirt logs which appears to call the bulk
stats API repeatedly.
Instead of requiring it we simply reply that the vCPU can't be offlined.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
There are two switch() statements over the same variable inside
of qemuMonitorJSONGetMemoryDeviceInfo(). Join them together into
one switch.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
When processing memory devices (as a reply from QEMU), a bunch of
STREQ()-s is used. Fortunately, the set of strings we process is
the same as virDomainMemoryModel enum. Therefore, we can use
virDomainMemoryModelTypeFromString() and then use integer
comparison (well, switch()). This has an upside: introducing a
new memory model lets us see what places need adjusting
immediately at compile time.
NB, this is in contrast with cmd line generator
(qemuBuildMemoryDeviceProps()), where more specific models are
generated (e.g. "pc-dimm", "virtio-mem-pci", etc.). But QEMU
reports back the parent model, instead of specific child
instance.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
When starting QEMU (or when reconnecting to a running one),
qemuMonitorJSONGetMemoryDeviceInfo() is called to refresh info on
memory devices. In here, query-memory-devices is called which
returns info on all memory devices. The result is then iterated
over and for some memory models runtime information is updated.
The rest is to be ignored. Except, when introducing SGX support,
this was turned into an error leaving us unable to start any
domain with virtio-pmem memory device (as virtio-pmem is to be
ignored).
Fixes: ddb1bc0519
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
When a QEMU netdev is of type "stream", if the socket it uses for
connectivity to the host network gets closed, then QEMU will send a
NETDEV_STREAM_DISCONNECTED event. We know that any stream netdev we've
created is backed by a passt process, and if the socket was closed,
that means the passt process has disappeared.
When we receive this event, we can respond by starting a new passt
process with the same options (including socket path) we originally
used. If we have previously created the stream netdev device with a
"reconnect" option, then QEMU will automatically reconnect to this new
passt process. (If we hadn't used "reconnect", then QEMU will never
try to reconnect to the new passt process, so there's no point in
starting it.)
Note that NETDEV_STREAM_DISCONNECTED is an event sent for the netdev
(ie "host side") of the network device, and so it sends the
"netdev-id" to specify which device was disconnected. But libvirt's
virDomainNetDef (the object used to keep track of network devices) is
the internal representation of both the host-side "netdev", and the
guest side device, and virDomainNetDef doesn't directly keep track of
the netdev-id, only of the device's "alias" (which is the "id"
parameter of the *guest* side of the device). Fortunately, by convention
libvirt always names the host-side of devices as "host" + alias, so in
order to search for the affected NetDef, all we need to do is trim the
1st 4 characters from the netdev-id and look for the NetDef having
that resulting trimmed string as its alias. (Contrast this to
NIC_RX_FILTER_CHANGED, which is an event received for the guest side
of the device, and so directly contains the device alias.)
Resolves: https://bugzilla.redhat.com/2172098
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU's "reconnect" option of "-netdev stream" tells QEMU to
periodically (period is given in seconds as an argument to the option)
attempt to reconnect to the same passt socket to which it had
originally connected to. This is useful in cases where the passt
process terminates, and libvirtd starts a new passt process in its
place (which doesn't happen yet, but will happen automatically after
an upcoming patch in this series).
Since there is no real hueristic for determining the "best" value of
the reconnect interval, rather than clutter up config with a knob that
nobody knows how to properly twiddle, we just set the reconnect timer
to 5 seconds.
"-netdev stream" first appeared in QEMU 7.2.0, but the reconnect
option won't be available until QEMU 8.0.0, so we need to check QEMU
capabilities just in case someone is using QEMU 7.2.0 (and thus can
support passt backend, but not reconnect)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Detect that the 'stream' netdev backend supports reconnecting.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuPasstStart() already logs any error that occurs, so having the
caller log a generic error message only serves to obscure the actual
problem.
Fixes: a56f0168d5
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In commit 5af6134e I had added a new capability that is true if QEMU
allows "-netdev stream", but somehow neglected to actually check it in
commit a56f0168d when hooking up passt support to qemu. This isn't
catastrophic, since QEMU itself will still report an error, but that
error isn't as easy to understand as a libvirt-generated error.
Fixes: a56f0168d5
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Just like it can't remove its own PID files, passt can't unlink its
own socket upon exit (unless the initialisation fails), because it
has no access to the filesystem at runtime.
Remove the socket file in qemuPasstKill().
Fixes: a56f0168d5 ("qemu: hook up passt config to qemu domains")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Changing any of the attributes of an <interface>'s <backend> would
require removing and re-adding the interface for the new setting to
take effect, so fail any update-device that changes anything in
<backend>
Resolves: https://bugzilla.redhat.com/2169245
Signed-off-by: Laine Stump <laine@redhat.com>
When user creates external snapshot with making only memory snapshot
without any disks deleting that snapshot failed without reporting any
meaningful error.
The issue is that the qemuSnapshotDeleteExternalPrepare function
returns NULL because the returned list is empty. This will not change
so to make it clear if the function fails or not return int instead and
have another parameter where we can pass the list.
With the fixed memory snapshot deletion it will now correctly delete
memory only snapshot as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2170826
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When deleting external snapshot we should remove the memory snapshot
file as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
'reconnect' parameter doesn't pass to qemu properly when
hotplug vhost-user device to vm. Fix this by making
'reconnect' to get correct value.
Signed-off-by: Zhenguo Yao <yaozhenguo1@gmail.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
It makes sense to accept pvpanic-pci also without specified PCI
address and assign one if possible.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1961326
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This capability detects the availability of the pvpanic-pci
device that is required in order to use pvpanic on Arm (original
pvpanic is an emulated ISA device, for which Arm does not have
support).
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The way we start passt currently is: we use
virCommandSetPidFile() to use our virCommand machinery to acquire
the PID file and leak opened FD into passt. Then, we use
virPidFile*() APIs to read the PID file (which is needed when
placing it into CGroups or killing it). But this does not fly
really because passt daemonizes itself. Thus the process we
started dies soon and thus the PID file is closed and unlocked.
We could work around this by passing '--foreground' argument, but
that weakens passt as it can't create new PID namespace (because
it doesn't fork()).
The solution is to let passt write the PID file, but since it
does not lock the file and closes it as soon as it is written, we
have to switch to those virPidFile APIs which don't expect PID
file to be locked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
There are two places where we kill passt:
1) qemuPasstStop() - called transitively from qemuProcessStop(),
2) qemuPasstStart() - after failed start.
Now, the code from 2) lack error preservation (so if there's
another error during cleanup we might overwrite the original
error). Therefore, move the internals of qemuPasstStop() into a
separate function and call it from both places.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
When starting passt, it may write something onto its stderr
(convincing it to print even more is addressed later). Pass this
string we read to user.
Since we're not daemonizing passt anymore (see previous commit),
we can let virCommand module do all the heavy lifting and switch
to virCommandSetErrorBuffer() instead of reading error from an
FD.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
When passt is started, it daemonizes itself by default. There's
no point in having our virCommand module daemonize it too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The way setting up CGroups for external helpers work, is:
qemuExtDevicesHasDevice() is called first to determine whether
there is a helper process running, the CGroup controller is
created and then qemuExtDevicesSetupCgroup() is called to place
helpers into the CGroup. But when one reads just
qemuExtDevicesSetupCgroup() it's easy to miss this hidden logic.
Therefore, add a warning at the beginning of the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
If qemuPasstGetPid() fails, or the passt's PID is -1 then
qemuPasstSetupCgroup() returns early without any error message
set. Report an appropriate error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
We can have external helper processes running for domain
<interface/> too (e.g. slirp or passt). But this is not reflected
in qemuExtDevicesHasDevice() which simply ignores these.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This reverts commit 0c4e716835.
This patch was pushed by my mistake. Even though it got ACKed on
the list, I've raised couple of issues with it. They will be
fixed in next commits.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The 'pending' state needs to be handled by the blockjob code only when
the snapshot code requests a block-commit without auto-finalization.
If we always handle it we fail to properly remove the blockjob data for
the 'blockdev-create' job as that also transitions trhough 'pending' but
we'd never update it once it reaches 'concluded' as the code already
thinks that the job has finished and is no longer watching it.
Introduce a 'processPending' property into block job data and set it
only when we know that we need to process 'pending'.
Fixes: 90d9bc9d74
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2168769
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We only set up host for VIR_DOMAIN_TPM_TYPE_EMULATOR and thus
similarly, we should do cleanup for the same type. This also
fixes a crasher, in which qemuTPMEmulatorCleanupHost() accesses
tpm->data.emulator.storagepath which is NULL for
VIR_DOMAIN_TPM_TYPE_EXTERNAL.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2168762
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I initially had the passt process being started in an identical
fashion to the slirp-helper - libvirt was daemonizing the new process
and recording its pid in a pidfile. The problem with this is that,
since it is daemonized immediately, any startup error in passt happens
after the daemonization, and thus isn't seen by libvirt - libvirt
believes that the process has started successfully and continues on
its merry way. The result was that sometimes a guest would be started,
but there would be no passt process for qemu to use for network
traffic.
Instead, we should be starting passt in the same manner we start
dnsmasq - we just exec it as normal (along with a request that passt
create the pidfile, which is just another option on the passt
commandline) and wait for the child process to exit; passt then has a
chance to parse its commandline and complete all the setup prior to
daemonizing itself; if it encounters an error and exits with a non-0
code, libvirt will see the code and know about the failure. We can
then grab the output from stderr, log that so the "user" has some idea
of what went wrong, and then fail the guest startup.
Signed-off-by: Laine Stump <laine@redhat.com>
Commit 5ef2582646 added emitting of even when refreshign disk state,
where it wanted to avoid sending the event if disk state didn't change.
This was achieved by using 'continue' in the loop filling the
information. Unfortunately this skips extraction of whether the device
has a tray which is propagated into internal structures, which in turn
broke cdrom media change as the code thought there's no tray for the
device.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2166411
Fixes: 5ef2582646
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The virURIFormat() function either returns a string, or aborts
(on OOM). There's no way this function can return NULL (as of
v7.2.0-rc1~277). Therefore, it doesn't make sense to check its
retval against NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In one of recent commits (v9.0.0-rc1~106) I've made our QEMU
namespace code umount the original /dev. One of the reasons was
enhanced security, because previously we just mounted a tmpfs
over the original /dev. Thus a malicious QEMU could just
umount("/dev") and it would get to the original /dev with all
nodes.
Now, on some systems this introduced a regression:
failed to umount devfs on /dev: Device or resource busy
But how this could be? We've moved all file systems mounted under
/dev to a temporary location. Or have we? As it turns out, not
quite. If there are two file systems mounted on the same target,
e.g. like this:
mount -t tmpfs tmpfs /dev/shm/ && mount -t tmpfs tmpfs /dev/shm/
then only the top most (i.e. the last one) is moved. See
qemuDomainUnshareNamespace() for more info.
Now, we could enhance our code to deal with these "doubled" mount
points. Or, since it is the top most file system that is
accessible anyways (and this one is preserved), we can
umount("/dev") in a recursive fashion.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2167302
Fixes: 379c0ce4bf
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
When going through debug log of a domain startup process, one can
meet the following line:
debug : qemuProcessLaunch:7668 : Building mount namespace
But this is in fact wrong. Firstly, domain namespaces are just
enabled in domain's privateData. Secondly, the debug message says
nothing about actual state of namespace - whether it was enabled
or not.
Therefore, move the debug printing into
qemuProcessEnableDomainNamespaces() and tweak it so that the
actual value is reflected.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Similar to other error paths in qemuDomainUnshareNamespace(), jump to
the cleanup label on umount error instead of directly returning -1.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting a guest, helper processes are started first. But
they need a bit of special handling. Just consider a regular cold
boot and an incoming migration. For instance, in case of swtpm
with its state on a shared volume, we want to set label on the
state for the cold boot case, but don't want to touch the label
in case of incoming migration (because the source very
specifically did not restore it either).
Until now, these two cases were differentiated by testing
@incoming against NULL. And while that makes sense for other
aspects of domain startup, for external devices we need a bit
more, because a restore from a save file is also 'incoming
migration'.
Now, there is a difference between regular migration and restore
from a save file. In the former case we do not want to set
seclabels in the save state. BUT, in the latter case we do need
to set them, because the code that saves the machine restored
seclabels.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2161557
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When stopping swtpm we can restore the label either on just the
swtpm's domain specific logfile (/var/log/swtpm/libvirt/qemu/...),
or on the logfile and the state too (/var/lib/libvirt/swtpm/...).
The deciding factor is whether the guest is stopped because of
outgoing migration OR the state is on a shared filesystem.
But this is not correct condition, because for instance saving the
guest into a file (virsh save) is also an outgoing migration.
Alternatively, when the swtpm state is stored on a shared
filesystem, but the guest is destroyed (virsh destroy), i.e.
stopped because of different reason than migration, we want to
restore the seclabels.
The correct condition is: skip restoring the state on outgoing
migration AND shared filesystem.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2161557
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When cleaning up host in qemuProcessStop(), our external helper
processes (e.g. swtpm) want to know whether the domain is being
migrated out or not (so that they restore seclabels on a device
state that's on a shared storage).
This fact is reflected in the @outgoingMigration variable which
is set to true if asyncJob is anything but
VIR_ASYNC_JOB_MIGRATION_IN. Well, we have a specific job for
outgoing migration (VIR_ASYNC_JOB_MIGRATION_OUT) and thus we
should check for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Automatically free 'cpuinfo' and remove the cleanup label and ret
variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace virJSONValueObjectGet + virJSONValueIsArray by the single API
which returns only an array.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace instances of virJSONValueObjectGet + virJSONValueIsArray by
virJSONValueObjectGetArray.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Simplify construction of a single provider by using
virJSONValueObjectAdd and restructuring the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If a domain is configured to create a macvtap/macvlan but the
target link already exists, startup fails (as expected) with:
error: error creating macvtap interface test@eth0 (52:54:00:d9:0b:db): File exists
Okay, we could make that error message better, but that's not the
point. Since this error originated while generating cmd line
(the caller is qemuProcessStart(), transitively), the cleanup
after failed start is performed (qemuProcessStop()). Here,
virNetDevMacVLanDeleteWithVPortProfile() is called which removes
the macvtap interface we did not create (as it made us fail in
the first place).
Therefore, we need to track which macvtap/macvlan interface was
created successfully and remove only those.
You'll notice that only qemuProcessStop() has the new check. For
the (failed) hotplug case (qemuDomainAttachNetDevice()) this
function is already in place (the @iface_connected variable), or
not needed (qemuDomainRemoveNetDevice() - we're removing an
interface that was already attached to QEMU).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2166235
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every single caller of the
virNetDevMacVLanDeleteWithVPortProfile() function is calling it
wrapped inside of ignore_value() macro. This is because the
function is annotated as G_GNUC_WARN_UNUSED_RESULT. This makes no
sense. Drop the annotation and the macro envelope.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The hotplug code paths need to be able to pass the FDs to the monitor to
ensure that hotplug works.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
To ensure that we can hot-unplug the disk including the associated fdset
we need to store the fdset ID in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Rollback of FD sets passed to qemu is also needed after possible restart
of libvirtd when we need to serialize the data into status XML. For this
purpose we need to access the fdset ID once it was passed to qemu and
potentially re-create a 'qemuFDPass' struct in passed state.
Introduce 'qemuFDPassNewPassed' and 'qemuFDPassIsPassed'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Until now the code didn't expect that we'd want to rollback/detach a FD
passed on the commandline, but whith disk backend FD passing this can
happen.
Properly mark the 'qemuFDPass' object as passed to qemu even when it was
done on the commandline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Copy the pointer to qemuFDPass into struct qemuBlockStorageSourceAttachData
so that it can be used from qemuBuildBlockStorageSourceAttachDataCommandline
rather than looping again in qemuBuildDiskSourceCommandLineFDs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Be consistent with other children buffer variable naming scheme.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The iTCO watchdog is part of the q35 machine type since its inception,
we just did not add it implicitly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2137346
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order for the iTCO watchdog to be operational we must disable the
noreboot pin strap in qemu. This is the default starting from 8.0
machine types, but desirable for older ones as well. And we can safely
do that since that is not guest-visible.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is already possible with qemu, and actually already happening with
q35 machines and a specified watchdog since q35 already includes a
watchdog we do not include in the XML. In order to express such
posibility multiple watchdogs need to be supported.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The g_hash_table_unref() function does not accept NULL. Passing
NULL results in a glib warning being triggered. Check whether the
hash table is not NULL and unref it only then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Support virtio-crypto device, also support cryptodev types:
- builtin
- lkcf
Finally, we can launch a VM(QEMU) with one or more crypto devices by
libvirt.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Changes in this commit:
- docs: formatdomaincaps.rst
- conf: crypto related domain caps
- qemu: crypto related
- tests: crypto related test
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce crypto device like:
<crypto model='virtio' type='qemu'>
<backend model='builtin' queues='1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</crypto>
<crypto model='virtio' type='qemu'>
<backend model='lkcf'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0b' function='0x0'/>
</crypto>
Currently, crypto model supports virtio only, type supports qemu only
(vhost-user in the plan). For the qemu type, backend supports modle
builtin/lkcf, and the queues is optional.
Changes in this commit:
- docs: formatdomain.rst
- schemas: domaincommon.rng
- conf: crypto related domain conf
- qemu: crypto related
- tests: crypto related test
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The field is no longer used so we can remove it and the code filling it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
All callers pass 'false' so we no longer need it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Commit b7798a07f9 (in fall of 2016) changed the way we generate aliases
for 'dimm' memory devices as the alias itself is part of the migration
stream section naming and thus must be treated as ABI.
The code added compatibility layer for VMs with memory hotplug started
with the old scheme to prevent from generating wrong aliases. The
compatibility layer broke though later when 'nvdimm' and 'pmem' devices
were introduced as it wrongly detected them as old configuration.
Now rather than attempting to fix the legacy compat layer to treat other
devices properly we'll be better off simply removing it as it's
extremely unlikely that somebody has a VM started in 2016 running with
today's libvirt and attempts to hotplug more memory.
This fixes a corner case when a user hot-adds a 'dimm' into a VM with a
'dimm' and a 'nvdimm' after restart of libvirtd and then attempts to
migrate the VM.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2158701
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In error case, unref event->vm instead of vm. This makes it
easier for the reader to understand as it is the event struct
that's holding the reference.
Signed-off-by: Shaleen Bathla <shaleen.bathla@oracle.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have virDomainGetCPUStats() API which offers querying
statistics on host CPU usage by given guest. And it works in two
modes: getting overall stats (@start_cpu == -1, @ncpus == 1) or
getting per host CPU usage.
For the QEMU driver it is implemented by looking into values
stored in corresponding cpuacct CGroup controller. Well, this
works for system instances, where libvirt has permissions to
create CGroups and place QEMU process into them. But it does not
fly for session connection, where no CGroups are set up.
Fortunately, we can do something similar to v8.8.0-rc1~95 and use
virProcessGetStatInfo() to fill the overall stats. Unfortunately,
I haven't found any source of per host CPU usage, so we just
continue throwing an error in that case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Firstly, the virProcessGetStatInfo() does not fail really. But
even if it did, it sets correct errno only sometimes (and even
that is done in a helper it's calling - virProcessGetStat() and
even there it's the case only in very few error paths).
Therefore, using virReportSystemError() to report errors is very
misleading. Use plain virReportError() instead. Luckily, there
are only two places where the former was used:
chDomainHelperGetVcpus() and qemuDomainHelperGetVcpus() (not a
big surprise since CH driver is heavily inspired by QEMU driver).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In a recent commit of v9.0.0-rc1~192 I've tried to forbid case
where a TAP device already exists, but at the same time it's
managed by Libvirt (<interface type='ethernet'> <target
dev='tap0' managed='yes'/> </interface>). NB, if @managed
attribute is missing then it's assumed to be managed by Libvirt.
Anyway, I've mistakenly put setting of
VIR_NETDEV_TAP_CREATE_ALLOW_EXISTING flag into managed='yes'
branch instead of managed='no' branch in
qemuInterfaceEthernetConnect().
Move the setting of the flag into the correct branch.
Fixes: a2ae3d299c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The systemd service files of the qemu and libxl driver currently have a
'Requires' dependency on virtlockd, which is too strong since virtlockd
is not enabled by default in either driver. Change the dependency to a
'Wants' to avoid a package dependency between the driver subpackages and
the new libvirt-daemon-lock subpackage.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This commented-out option was pointed out by jtomko during review, but
I missed taking it out when addressing his comments.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This attribute was added to support setting the --interface option for
passt, but in a post-push/pre-9.0-release review, danpb pointed out
that it would be better to use the existing <source dev='xxx'/>
attribute to set --interface rather than creating a new attribute (in
the wrong place). So we remove backend/upstream, and change the passt
commandline creation to grab the name for --interface from source/dev.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Currently, the ThreadContext object is generated whenever we see
.host-nodes attribute for a memory-backend-* object. The idea was
that when the backend is pinned to a specific set of host NUMA
nodes, then the allocation could be happening on CPUs from those
nodes too. But this may not be always possible.
Users might configure their guests in such way that vCPUs and
corresponding guest NUMA nodes are on different host NUMA nodes
than emulator thread. In this case, ThreadContext won't work,
because ThreadContext objects live in context of the emulator
thread (vCPU threads are moved around by us later, when emulator
thread finished its setup and spawned vCPU threads - see
qemuProcessSetupVcpus()). Therefore, memory allocation is done by
emulator thread which is pinned to a subset of host NUMA nodes,
but tries to create a ThreadContext object with a disjoint subset
of host NUMA nodes, which fails.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2154750
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Jumping to the error label and reading the pidfile does not make sense
until we reached qemuSecurityCommandRun which creates the pidfile.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The pidfile is guaranteed to be non-NULL (thanks to glib allocation
functions) and it's dereferenced two lines above anyway.
Reported by coverity:
/src/qemu/qemu_passt.c: 278 in qemuPasstStart()
272 return 0;
273
274 error:
275 ignore_value(virPidFileReadPathIfLocked(pidfile, &pid));
276 if (pid != -1)
277 virProcessKillPainfully(pid, true);
>>> CID 404360: Null pointer dereferences (REVERSE_INULL)
>>> Null-checking "pidfile" suggests that it may be null, but it
>>> has already been dereferenced on all paths leading to the check.
278 if (pidfile)
279 unlink(pidfile);
280
281 return -1;
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
To ensure same behaviour when remote driver is or is not used we must
not steal the FDs and array holding them passed to qemuDomainFDAssociate
but rather duplicate them. At the same time the remote driver must close
and free them to prevent leak.
Pointed out by Coverity as FD leak on error path:
*** CID 404348: Resource leaks (RESOURCE_LEAK)
/src/remote/remote_daemon_dispatch.c: 7484 in remoteDispatchDomainFdAssociate()
7478 rv = 0;
7479
7480 cleanup:
7481 if (rv < 0)
7482 virNetMessageSaveError(rerr);
7483 virObjectUnref(dom);
>>> CID 404348: Resource leaks (RESOURCE_LEAK)
>>> Variable "fds" going out of scope leaks the storage it points to.
7484 return rv;
Fixes: abd9025c2f
Fixes: f762f87534
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This consists of (1) adding the necessary args to the qemu commandline
netdev option, and (2) starting a passt process prior to starting
qemu, and making sure that it is terminated when it's no longer
needed. Under normal circumstances, passt will terminate itself as
soon as qemu closes its socket, but in case of some error where qemu
is never started, or fails to startup completely, we need to terminate
passt manually.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
passt support requires "-netdev stream", which was added to QEMU in
qemu-7.2.0.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This fits better with the element containing the value (<driver>), and
allows us to use virDomainNetBackend* for things in the <backend>
element.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assert support for VIR_DOMAIN_DEF_FEATURE_DISK_FD in the qemu driver
now that all code paths are adapted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Probing stats and block copy to a FD passed image is not yet supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We assume that FD passed images already exist so all existance checks
are skipped.
For the case that a FD-passed image is passed without a terminated
backing chain (thus forcing us to detect) we attempt to read the header
from the FD.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Prepare the internal data for passing FDs instead of having qemu open
the file internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When starting up a VM with FD-passed images we need to look up the
corresponding named FD set and associate it with the virStorageSource
based on the name.
The association is brought into virStorageSource as security labelling
code will need to access the FD to perform selinux labelling.
Similarly when startup is complete in certain cases we no longer need to
keep the copy of FDs and thus can close them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The new helper qemuDomainStartupCleanup is used to perform cleanup after
a startup of a VM (successful or not). The initial implementation just
calls qemuDomainSecretDestroy, which can be un-exported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Implement passing and storage of FDs for the qemu driver. The FD tuples
are g_object instances stored in a per-domain hash table and are
automatically removed once the connection is closed.
In the future we can consider supporting also to not tie the lifetime of
the passed FDs bound to the connection.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The patch moving the code didn't faithfully represent the typecasting
of the 'bandwidth' variable needed to properly convert from the legacy
'unsigned long' argument which resulted in a build failure on 32 bit
systems:
../src/qemu/qemu_block.c: In function ‘qemuBlockCommit’:
../src/qemu/qemu_block.c:3249:23: error: comparison is always false due to limited range of data type [-Werror=type-limits]
3249 | if (bandwidth > LLONG_MAX >> 20) {
| ^
Fix it by returning the check into qemuDomainBlockCommit as it's needed
only because of the legacy argument type in the old API and use
'unsigned long long' for qemuBlockCommit.
Fixes: f5a77198bf
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Some compilers aren't happy when an automatically freed variable is used
just to free something (thus it's only assigned in the code):
When compiling qemuSnapshotDelete after recent commits they complain:
../src/qemu/qemu_snapshot.c:3153:61: error: variable 'delData' set but not used [-Werror,-Wunused-but-set-variable]
g_autoslist(qemuSnapshotDeleteExternalData) delData = NULL;
^
To work around the issue we can restructure the code which also has the
following semantic implications:
- since qemuSnapshotDeleteExternalPrepare does validation we error out
sooner than attempting to start the VM
- we read the temporary variable at least in one code path
Fixes: 4a4d89a925
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
