This patch adds a new attribute "register" to the <domain> element. If
set to "yes", the DNS server created for the virtual network is
registered with systemd-resolved as a name server for the associated
domain. The names known to the dnsmasq process serving DNS and DHCP
requests for the virtual network will then be resolvable from the host
by appending the domain name to them.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch makes it possible to manually specify which VFIO variant
driver to use for PCI hostdev device assignment, so that, e.g. you
could force use of a VFIO "variant" driver, with e.g.
<driver model='mlx5_vfio_pci'/>
or alternately to force use of the generic vfio-pci driver with
<driver model='vfio-pci'/>
when libvirt would have normally (after applying a subsequent patch)
found a "better match" for a device in the active kernel's
modules.alias file. (The main potential use of this manual override
would probably be to work around a bug in a new VFIO variant driver by
temporarily not using that driver).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The next step in consolidating parsing/formatting of the <driver>
element of these objects using a common struct and common code. This
eliminates the virNetworkForwardDriverNameType enum which is nearly
identical to virDeviceHostdevPCIDriverName (the only non-identical bit
was just because they'd gotten out of sync over time) and replaces its
uses with a virDeviceHostdevPCIDriverInfo (which is a struct that
contains a virDeviceHostdevPCIDriverName).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
It's somewhat confusing that some of the services have a
corresponding foo.service.extra.in and foo.socket.extra.in, some
have just one of the two, and some have neither.
In order to make things more approachable, make sure that both
files exists for each service.
In most cases the extra units are currently unused, so they will
just contain a comment briefly explaining their purpose and
pointing users to meson.build, where they can find more
information. The same comment is also added to the top of
extra units that already have some contents in them for
consistency.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that the underlying script is able to merge an arbitrary
number of units into the base template, expose this possibility
in the build system.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Hypervisors are referred to by their user-facing name rather
than the name of their libvirt driver, the monolithic daemon is
explicitly referred to as legacy, and a consistent format is
used throughout.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We're about to change the defaults and start migrating to common
templates: in order to be able to switch units over one at a
time, make the input files that are currently used explicit
rather than implicit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that providing the value is optional, we can remove almost
all uses.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For most services, the value provided explicitly matches the
documented default.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Error messages are exempt from the 80 columns rule. Move them
onto one line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
- Introduces virNetworkObjGetMetadata() and
virNetworkObjSetMetadata().
- These functions implement common behaviour that can be reused by
network drivers.
- Introduces virNetworkObjUpdateModificationImpact() among other
helper functions that resolve the live/persistent state of
the network before setting metadata.
- Eliminates redundant call of virNetworkObjSetDefTransient() in
virNetworkConfigChangeSetup() among others.
- Substituted redundant logic in networkUpdate() with a call to
virNetworkObjUpdateModificationImpact().
Signed-off-by: K Shiva Kiran <shiva_kr@riseup.net>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The unit files both have After=network.target, and this in turn implies
After=network-pre.target. Both iptables.service & ip6tables.service have
Before=network-pre.target since Fedora >= 35 and RHEL >= 8.4.
When we first added the deps on ip[6]tables.service in
commit 0756415f14
Author: Laine Stump <laine@redhat.com>
Date: Fri May 1 00:05:50 2020 -0400
systemd: start libvirtd after firewalld/iptables services
the Before=network-pre.target didn't exist, but we can rely on it now
given our supported platforms matrix.
The firewalld.service has similarly has a Before=network-pre.target,
even when we took that commit above, so this dep was in face never
actually needed. This answers the question posed in that above commit
message about firewalld ordering.
https://gitlab.com/libvirt/libvirt/-/issues/489
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All services are ordered after local-fs.target unless they have set
DefaultDependencies=no, which we do not do.
https://gitlab.com/libvirt/libvirt/-/issues/489
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In our meson scripts, we use configure_file(copy:true) to copy
files from srcdir into builddir. However, as of meson-0.64.0,
this is deprecated [1] in favor of using:
fs = import('fs')
fs.copyfile(in, out)
Except, the submodule's new method wasn't introduced until
0.64.0. And since we can't bump the minimal meson version we
require, we have to work with both: new and old versions.
Now, the fun part: fs.copyfile() is not a drop in replacement as
it returns different type (a custom_target object). This is
incompatible with places where we store the configure_file()
retval in a variable to process it further.
While we could just replace 'copy:true' with a dummy
'configuration:...' (say 'configuration: configmake_conf') we
can't do that for binary files (like src/fonts/ or src/images/).
Therefore, places where we are not interested in the retval can
be switched to fs.copyfile() and places where we are interested
in the retval will just use a dummy 'configuration:'.
Except, src/network/meson.build. In here we not just copy the
file but also specify alternative install dir and that's not
something that fs.copyfile() can handle. Yet, using 'copy: true'
is viewed wrong [2].
1: https://mesonbuild.com/Release-notes-for-0-64-0.html#fscopyfile-to-replace-configure_filecopy-true
2: https://github.com/mesonbuild/meson/pull/10042
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This is a relic of commit v3.7.0-rc1~132 when getter/setter APIs
for dnsmasq's PID were introduced. Previously, obj->dnsmasqPid
was accessed directly. But the aforementioned commit introduced
two calls to virNetworkObjGetDnsmasqPid() even though the result
of the first call is stored in a variable.
Remove the second call as it's unnecessary.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assume there's a dnsmasq running (because there's an active
virtual network that spawned it). Now, shut down the daemon,
remove the dnsmasq binary and start the daemon again. At this
point, networkUpdateState() is called, but dnsmasq_caps is NULL
(because networkStateInitialize() called earlier failed to set
them, rightfully though).
Now, the networkUpdateState() tries to read the dnsmasq's PID
file using virPidFileReadIfAlive() which takes a path to the
corresponding binary as one of its arguments. To provide that
path, dnsmasqCapsGetBinaryPath() is called, but since
dnsmasq_caps is NULL, it dereferences it and thus causes a crash.
It's true that virPidFileReadIfAlive() can deal with a removed
binary (well virPidFileReadPathIfAlive() which it calls can), but
iff the binary path is provided in its absolute form. Otherwise,
virFileResolveAllLinks() fails to canonicalize the path
(expected, the path doesn't exist anyway).
Therefore, reading dnsmasq's PID file didn't work before
v8.1.0-rc1~401 which introduced this crash. It was always set to
-1. But passing NULL as binary path instead, makes
virPidFileReadIfAlive() return early, right after the PID file is
read and it's confirmed the PID exists.
Yes, this may yield wrong results, as the PID might be of a
completely different binary. But this problem is preexistent and
until we start locking PID files, there's nothing we can do about
it. IOW, it would require rework of dnsmasq PID file handling.
Fixes: 4b68c982e2
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/456
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only caller that actually wants to wait for the lock.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The parameter was added for consistency with virPidFileAcquirePath.
However, all callers of virPidFileAcquire pass false.
Remove the argument.
Partially-reverts: 2250a2b5d2
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Prior to firewalld version 1.0.0, the default action of ACCEPT in the
"libvirt" zone (subsequently overridden with a lower priority "REJECT"
action) would result in an implicit rule that allowed incoming sessions
through the zone; libvirt relied on this implicit rule to permit
incoming connections to guests that were connected via a libvirt
"routed" network.
Starting in firewalld 1.0.0, the rules generated for this same
zonefile changed such that incoming sessions through the libvirt zone
were no longer allowed, breaking the longstanding convention that they
should be allowed (only for routed networks).
However, beginning with firewalld 0.9.0, a zone can explicitly
allow/block forwarded traffic (by adding a "policy" to the zone that
specifies what happens to packets that are going in one zone and out
another zone).
This patch changes the zone for routed networks from "libvirt" to the
newly-added "libvirt-routed" zone that uses the new policy
functionality to once again allow incoming sessions to guests on
routed networks.
(If firewalld is < 0.9.0, then the policy file won't be read at all,
so firewalld won't log any error, and libvirt will just use the old
setup that takes advantage of the implicit forwarding rules).
Resolves: https://bugzilla.redhat.com/2055706
Signed-off-by: Eric Garver <eric@garver.life>
Reviewed-by: Laine Stump <laine@redhat.com>
This zone will be used for the routed network by default.
Note that this zone definition omits "forward" aka intra-zone
forwarding, because it requires firewalld >= 0.9.0.
Signed-off-by: Eric Garver <eric@garver.life>
Reviewed-by: Laine Stump <laine@redhat.com>
The path() method is deprecated in 0.55.0 and we're recommended
to use full_path() instead. Interestingly, we were already doing
do in couple of places, but not all of them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace virNetworkDefParseString/File by direct calls to
virNetworkDefParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace the two helpers virNetworkPortDefParseString/File with the
common helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patch which is fixing the opening of drivers in monolithic mode
needs to know whether we are inside 'libvirtd' but the code where the
decision needs to happen is not re-compiled per daemon. Thus we need to
pass this information to the stateful driver init function so that it
can be remebered.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similar to the other drivers, virNetworkDriverState now has a
virObject-derived object called virNetworkDriverConfig which is used
for config items.
As a starting point, the directory paths used by the network driver
are moved there (again, parallelling what is done for other drivers).
Using items in virNetworkDriverConfig is (yes, again) similar to using
items in the other drivers' config - anything in the config object is
immutable (once initialized), so the state object only needs to be
locked while getting a reference to the config object, and then the
members of the config object can be safely used until the config
object is unrefed.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is more similar to lxc and qemu drivers, where the driver state
struct is defined along with a config struct in ${driver}_conf.h
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virMacMap module is used only for libvirt_guests NSS module
as it records list of MAC addresses used by certain guest. But
the module itself is usable if and only if the network assigns IP
addresses (i.e. has dnsmasq running). If it's some other
authority that assigns IP addresses then we do not need the
virMacMap module at all.
For instance, a network with no <forward/> type and no DHCP set
won't create /var/lib/libvirt/dnsmasq/ dir which is what the
module expects to exist. But there's no need for the module to
even care about such network.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/348
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, whenever virNetworkObjSetMacMap() is called the same
pattern is used:
1) call virMacMapFileName() to generate a filename,
2) pass this filename to virMacMapNew(), and finally
3) pass retval from previous step to virNetworkObjSetMacMap().
Move this code into a helper (networkSetMacMap()) and replace
both pattern occurrences with its call.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virNetworkObjSetMacMap() API effectively steals passed
@macmap argument. However, the argument is a plain, first order
pointer. This requires every caller to set the argument to NULL
after the function was called. Let's make the function take
double pointer instead to make it obvious that the argument is
consumed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's annotate virMacMap variables in bridge_driver.c with
g_autoptr() so that they are automatically freed upon error. This
may look like a needless commit, since there's no memory leak
currently, but it simplifies the next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The networkStartNetworkVirtual() function handles starting of
networks of different forward types (none, nat, route, open).
And as a part of startup process dnsmasq might be spawned but
doesn't have to be (depending on the network configuration). The
@dnsmasqStarted variable is supposed to track whether dnsmasq was
started or not (so that it can be killed when starting network
fails after it was started). But the variable is set even when
the code decided not to start it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We already allow users to provide TFTP root path in network XML
and not specify any DHCP. This makes sense, because dnsmasq is
not only DHCP server but also TFTP server and users might have
a DHCP server configured on their own, outside of libvirt's
control and want just the TFTP part.
By moving TFTP config generator out of DHCP generator and calling
it for every IPv4 range, users can finally enable just TFTP.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2026765
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Generating configuration file for dnsmasq is done in
networkDnsmasqConfContents() which is this big, self-contained
function. Separate at least DHCP part into its own function for
better readability.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In networkDnsmasqConfContents() there's a for() loop which
initializes some variables in its initialization block. This
makes both the loop() statement and variable declaration block
look needlessly ugly. Speaking of variable declaration, also move
some variables which are used only within blocks into their
respective blocks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All these features are supposed to be handled by the call to
virDriverFeatureIsGlobal() placed right above the switch
statement, so if any of them is actually encountered inside
the switch statement it means there's a bug in the driver and
we should report an error.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virNetworkForwardDef.managed is a bool but
virNetworkPortDef.hostdevpci.managed is a virTristateBool, which
means that the current code performs the following incorrect
conversion:
false -> BOOL_ABSENT
true -> BOOL_YES
Using the virTristateBoolFromBool() helper solves the issue.
Fixes: 6cb0ec48bd
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
That is the proper POSIX way.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'virDrvFeature' has a combination of features which are asserted by
the specific driver and features which are actually global.
In many cases the implementation was cargo-culted into newer drivers
without re-assesing whether it makes sense.
This patch introduces a global function which will specifically handle
these global flags and defer the rest to the driver.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
