Add <controller type='scsi' model handling for virtio transitional
devices. Ex:
<controller type='scsi' model='virtio-transitional'/>
* "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional"
The naming here doesn't match the pre-existing model=virtio-scsi.
The prescence of '-scsi' there seems kind of redundant as we have
type='scsi' already, so I decided to follow the pattern of other
patches and use virtio-transitional etc.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<input> devices lack the model= attribute which is used by
most other device types. To eventually support
virtio-input-host-pci-{non-}traditional in qemu, let's add
a standard model= attribute. This just adds the domain_conf
wiring
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<filesystem> devices lack the model= attribute which is used by
most other device types. To eventually support
virtio-9p-pci-{non-}traditional in qemu, let's add a standard
model= attribute. The accepted values are:
- virtio
- virtio-transitional
- virtio-non-transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
qemu vhost-scsi devices map to XML roughly like:
<hostdev mode='subsystem' type='scsi_host'>
<source protocol='vhost' wwpn=X/>
</hostdev>
To support vhost-scsi-pci-{non-}traditional in qemu, we
need to to extend the SCSI Host hostdev XML to handle
model= value. This matches the XML model= format used
for mediated devices. This is just the domain_conf bits
and some XML test cases.
Use of virtio-X naming here does not match the hostdev
protocol=vhost nor does it match the qemu vhost-X device
naming, however it's more consistent with all other
model= names in this area, and also matches the
inconsistency of <vsock> devices which use model=virtio
but map to vhost-vsock on the qemu commandline
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add new <disk> model values for virtio transitional devices. When
combined with bus='virtio':
* "virtio-transitional" maps to qemu "virtio-blk-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-blk-pci-non-transitional"
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<disk> devices lack the model= attribute which is used by
most other device types. bus= mostly acts as one, but it
serves other purposes too like determing what target=
prefix to use, and for matching against controller type=
values.
Extending bus= to handle additional virtio transitional
devices will complicate apps lives, and it isn't a clean
mapping anyways. So let's bite the bullet and add a new
<disk model=X/> attribute, and wire up common handling
for virtio and virtio-{non-}transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add a single QEMU_CAPS_VIRTIO_PCI_TRANSITIONAL that
will be set if any of the following qemu devices are found:
virtio-blk-pci-transitional
virtio-blk-pci-non-transitional
virtio-net-pci-transitional
virtio-net-pci-non-transitional
vhost-scsi-pci-transitional
vhost-scsi-pci-non-transitional
virtio-rng-pci-transitional
virtio-rng-pci-non-transitional
virtio-9p-pci-transitional
virtio-9p-pci-non-transitional
virtio-balloon-pci-transitional
virtio-balloon-pci-non-transitional
vhost-vsock-pci-transitional
vhost-vsock-pci-non-transitional
virtio-input-host-pci-transitional
virtio-input-host-pci-non-transitional
virtio-scsi-pci-transitional
virtio-scsi-pci-non-transitional
virtio-serial-pci-transitional
virtio-serial-pci-non-transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1658504
This function is called when a domain is starting up (in qemu
driver that is when qemu cmd line is generated). It is used to
translate <disk type='volume'/> to something usable by filling in
virStorageSource (e.g. fetching disk path, or some connection URI
for a network FS). But some of these info are not stored in
status XML and thus the function is called on
qemuProcessReconnect too to reconstruct runtime data. But this
poses a problem because after the first run the mode is set to
'direct', but in the second run this triggers a failure because
mode is valid only for 'iscsi' volumes and not 'iscsi-direct'
ones.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Rewrite the code to make usage of some VIR_AUTOFREE logic.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we're using VIR_AUTOFREE there's quite a bit of clean up
possible for now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Let's make use of the auto __cleanup capabilities for VIR_FREE consumers.
In some cases adding or removing blank lines for readability.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In preparation for VIR_AUTOFREE usage, let's remove a couple
of unused variables so that clang compilations won't fail.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we're using VIR_AUTOPTR(virBitmap) there's a couple of methods
that we can clean up some now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Let's make use of the auto __cleanup capabilities for virBitmapPtr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In preparation for using auto free mechanism, change to using the
VIR_STEAL_PTR on @def to @ret and of course be sure to properly clean
up @def in cleanup.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use the new helper when moving around the current node of the XPath
context.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Quite a few parts modify the XPath context current node to shift the
scope and allow easier queries. This also means that the node needs
to be restored afterwards.
Introduce a macro based on 'VIR_AUTOCLEAN' which adds a local structure
on the stack remembering the original node along with a function which
will make sure that the node is reset when the local structure leaves
scope.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The helper function is used by the VIR_AUTOUNREF macro. Prior art is to
clear the pointer even if the variable goes out of scope.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We'd free only the first element of the vector leaking the rest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We don't need it as there's a separate macro for auto-freeing of string
lists.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use of VIR_AUTOPTR and virString is confusing as it's a list and not a
single pointer. Replace it by VIR_AUTOSTRINGLIST as string lists are
basically the only sane NULL-terminated list we can have.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Similar to VIR_AUTOPTR, VIR_AUTOSTRINGLIST defines a list of strings
which will be freed if the pointer is leaving scope.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The existing qemu snapshot code has a slight bug: if the domain
is currently pmsuspended, you can't use the _REDEFINE flag even
though the current domain state should have no bearing on being
able to recreate metadata state; and conversely, you can use the
_REDEFINE flag to create snapshot metadata claiming to be
pmsuspended as a bypass to the normal restrictions that you can't
create an original qemu snapshot in that state (the restriction
against pmsuspend is specific to qemu, rather than part of the
driver-agnostic snapshot_conf code).
Fix this by checking the snapshot state (when redefining) instead
of the domain state (which is a subset of snapshot states).
Fixes the second problem mentioned in https://bugzilla.redhat.com/1680304
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Both block_size and nb_block are unit32_t and multiplying them overflows
at 4GiB.
Moreover, the iscsi_*10_* APIs use 32bit number of blocks and thus they
can only address images up to 2TiB with 512B blocks. Let's use 64b
iscsi_*16_* APIs instead.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When fetching LUNs from iscsi server the
virISCSIDirectReportLuns() is called. This function does some
libiscsi calls and then calls virISCSIDirectRefreshVol() over
each LUN found. It's unfortunate that the latter calls
virStoragePoolObjClearVols() as we lose all LUNs processed
in previous iterations.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Jirka reported a bug that with every 'virsh pool-refresh' an
iscsi-direct pool would grow and grow. The problem is that
virISCSIDirectRefreshVol() only adds to def->capacity and
def->allocation but nothing clears it out to begin with.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
For consistency with other error messages, and the fact that
the object is always called a virDomainSnapshot rather than
a mere virSnapshot, include the word "domain" in the error
message.
Suggested-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 28f8dfdc (1.0.0) added a flag to virDomainGetXMLDesc, but
failed to document its effects. And considering that the
MIGRATABLE flag has been the source of past bugs (CVE-2014-7823,
fixed in commit b1674ad5 (1.2.11), or even cf2d4c60 (1.2.13) where
flag mismatch broke virsh edit), make the wording wishy-washy
enough to discourage using the flag casually, by mentioning that
the resulting XML is more for internal use than for validation
against the schema.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Due to historical back-compat, bare 'virsh snapshot-create-as'
favors internal snapshots (but can't be used on domains with raw
storage), while 'virsh snapshot-create-as --disk-only' favors
external snapshots. What's more, snapshots created with
--disk-only while the domain was running are marked as snapshot
state 'disk-snapshot', while snapshots created while the domain
was offline are marked as snapshot state 'shutdown' (a
'disk-snapshot' image might not be quiescent, while a 'shutdown'
snapshot always is).
But this leads to some interesting problems: if we create a
--disk-only snapshot of an offline guest, and then immediately try
to 'virsh snapshot-create --redefine' using the resulting XML to
overwrite the existing snapashot in place, things silently succeed,
but 'virsh snapshot-create --redefine --disk-only' fails with an
error message that the snapshot state is not 'disk-only'. Worse,
if we delete the snapshot metadata first and then try to recreate
things, omitting --disk-only fails because the verification code
wants to force the default of an internal snapshot (which doesn't
work with raw disks), and using --disk-only still fails because the
snapshot XML is not 'disk-only' - making it impossible to recreate
the snapshot metadata (or to transfer it from one libvirtd host to
another). Ideally, the presence or absence of the --disk-only
flag, and the presence or absence of an existing snapshot being
overwritten, shouldn't matter; if the XML is valid for one
situation, it should always be valid to redefine the metadata for
that snapshot.
Fix things by uniformly using virDomainSnapshotDefIsExternal()
(caching the results up front, and eliminating other 'if' clauses
now rendered redundant) when deciding whether the XML being
requested for redefinition should permit external or force internal
state capture (we got it right in only one out of three places in
the function).
See also https://bugzilla.redhat.com/1680304; this fixes the
domain-agnostic problems mentioned there, but another patch is
needed to fix further oddities with the qemu driver. I did not
check for sure when the problems were introduced (git blame puts
some affected hunks as far back as 1.0.0), but it was definitely
been broken even before when commit 670e86bf (1.1.4) factored
redefine prep out of qemu code into the common snapshot_conf code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Upcoming patches plan to introduce virDomainCheckpointPtr as a new
object for use in incremental backups, along with documentation on
how incremental backups differ from snapshots. But first, we need
to rename any existing mention of a 'system checkpoint' to instead
be a 'full system snapshot', so that we aren't overloading
the term checkpoint.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
vcpupin will fail when maxvcpus is larger than current
vcpu:
virsh vcpupin win7 --vcpu 0 --cpulist 5-6
error: Requested operation is not valid: cpu affinity is not supported
win7 xml in the command above is like below:
...
<vcpu current="3" placement="static">8</vcpu>
...
The reason is vcpu[3] and vcpu[4] have zero tids and should not been
compared as valid situation in qemuDomainRefreshVcpuInfo().
This issue is introduced by commit 34f7743, which fix recording of vCPU
pids for MTTCG.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Added GPFS as shared file system recognized during live migration
security checks.
GPFS is 'IBM General Parallel File System' also called
'IBM Spectrum Scale'
BUG: https://bugzilla.redhat.com/show_bug.cgi?id=1679528
Signed-off-by: Diego Michelotto <diego.michelotto@cnaf.infn.it>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The structure used to handle network entries was based on 'if,else'
conditions. This commit converts this ugly structure into a switch to
clearify each option of the handler.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Extract out the network "type" processing into it's own method
rather than inline within lxcNetworkParseDataSuffix.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This commit removes the full network entry setting: "lxc.network.X" to
type only. Like "type", "name", "flags", etc. This will handle entries
regardless of whether they are prefixed by "lxc.network." (today) or
"lxc.net.X." (the future).
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Refactor lxcNetworkWalkCallback to be a simple method to handle
both possible network settings with indexes or the simple one. It is
better the decouple the whole algorithm to parse data to only parse
which entry type libvirt is handling.
The new method is responsible to verify is the settings correspond to
network entry. Right now, it is only verifying "lxc.network.", but in
the future, it can be used to verify "lxc.net.X." too. Any other case
would be rejected.
On the other hand, the idea here is working only with types. If we know
that entry is part of network settings, after we just need to know which
type is. It keeps the handler simple.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The new method called lxcNetworkParseDataIPs() is responsible to handle
IPv{4,6} settings now. The idea is let lxcNetworkWalkCallback() method
handle all entries related to network definition only.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
libvirt_iohelper is used internally by the virFileWrapperFd APIs;
more specifically, in the QEMU driver we have the doCoreDump() and
qemuDomainSaveMemory() helper functions as users, and those in turn
end up being called by the implementation of several driver APIs.
By calling virReportError() if libvirt_iohelper has failed, we
overwrite whatever generic error message QEMU might have raised
with the more useful one generated by the helper program.
After this commit, the user will be able to see the error directly
instead of having to dig in the journal or libvirtd log.
https://bugzilla.redhat.com/show_bug.cgi?id=1578741
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virFileWrapperFdFree(), like all free functions, is supposed
to only release allocated resources, so error reporting is
better suited for virFileWrapperFdClose().
This reverts commit b0c3e93180.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Right now we're reporting errors in virFileWrapperFdFree(),
but that's hardly the appropriate place to do so, as free
functions are supposed to do nothing more than release
allocated resources.
We want to move that code back into virFileWrapperFdClose(),
but before we can do that we need to make sure the function
is actually called every time we're done processing the
wrapped file. The cleanup path is the obvious candidate.
In a couple of cases we can just move the call, but for the
remaining ones we need to duplicate it instead in order not
to alter the existing behavior. We do, however, make sure
that in all cases a failure to properly close the wrapper
results in the overall operation being reported as failed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We'll want to use this function in the cleanup path soon,
and in order to be able to do that we need to make sure we
can call it multiple times on the same virFileWrapperFd
without side effects.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace virDomainChrSourceDefFree with virObjectUnref.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use refcounting for priv->monConfig instead of asymmetric freeing.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Change fb01e1a44 "virt-aa-helper: generate rules for gl enabled
graphics devices" implemented the detection for gl enabled
devices in virt-aa-helper. But further testing showed
that it will need much more access for the full gl stack
to work.
Upstream apparmor just recently split those things out and now
has two related abstractions at
https://gitlab.com/apparmor/apparmor/blob/master:
- dri-common at /profiles/apparmor.d/abstractions/dri-common
- mesa: at /profiles/apparmor.d/abstractions/mesa
If would be great to just include that for the majority of
rules, but they are not yet in any distribution so we need
to add rules inspired by them based on the testing that we
can do.
Furthermore qemu with opengl will also probe the backing device
of the rendernode for attributes which should be safe as
read-only wildcard rules.
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1815452
Acked-by: Jamie Strandboge <jamie@canonical.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Change fb01e1a44 "virt-aa-helper: generate rules for gl enabled
graphics devices" implemented the detection for gl enabled
devices in virt-aa-helper. But it will in certain cases e.g. if
no rendernode was explicitly specified need to read /dev/dri
which it currently isn't allowed.
Add a rule to the apparmor profile of virt-aa-helper itself to
be able to do that.
Acked-by: Jamie Strandboge <jamie@canonical.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Add a bhyveDomainDefNeedsISAController() helper function
which by domain configuration determines whether LPC controller is
required or not.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Implement the MSRs ignore unknown reads and writes feature
that's specified using:
<features>
...
<msrs unknown='ignore'>
...
</features>
in the domain XML.
In bhyve, it's just passing '-w' command line argument to the bhyve(8)
executable.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Introduce the 'msrs' feature element that controls Model Specific
Registers related behaviour. At this moment it allows only
single tunable attribute "unknown":
<msrs unknown='ignore|fault'/>
Which tells hypervisor to ignore accesses to unimplemented
Model Specific Registers. The only user of that for now is going
to be the bhyve driver.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Replace all uses where virBuffer would need clearing on the cleanup
path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
virBuffer is almost always stack-allocated, but requires freeing of the
internals on error. Introduce a VIR_AUTOCLEAN function to deal with
this.
Along with the addition add a test which would leak the buffer contents
if it weren't autocleaned.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The new utility macros are useful for variables we put on the stack but
require some cleanup. The most prominent of those is virBuffer which is
used almost exclusively in that way.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The conversion to VIR_AUTOFREE of 'escapeList' introduced memory leak of
the copied item to be escaped:
==17517== 2 bytes in 1 blocks are definitely lost in loss record 1 of 32
==17517== at 0x483880B: malloc (vg_replace_malloc.c:309)
==17517== by 0x54D666D: strdup (in /usr/lib64/libc-2.28.so)
==17517== by 0x497663E: virStrdup (virstring.c:956)
==17517== by 0x497663E: virStrdup (virstring.c:945)
==17517== by 0x48F8853: virBufferEscapeN (virbuffer.c:707)
==17517== by 0x403C9D: testBufEscapeN (virbuftest.c:383)
==17517== by 0x405FA8: virTestRun (testutils.c:174)
==17517== by 0x403A70: mymain (virbuftest.c:517)
==17517== by 0x406BC9: virTestMain (testutils.c:1097)
==17517== by 0x5470412: (below main) (in /usr/lib64/libc-2.28.so)
[...] (all other have same backtrace as it happens in a loop)
Fix it by reverting all the VIR_AUTO nonsense in this function as there
is exactly one place where it's handled.
This effectively reverts commits:
d0a92a037196fbf6df90d261ed2fb1
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
'virBufferFreeAndReset' does not free the top level structure itself.
Additionally we almost exclusively use stack'd buffers rather than
pointers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
dnsmasq documentation says that the *IPv4* prefix/network
address/broadcast address sent to dhcp clients will be automatically
determined by dnsmasq by looking at the interface it's listening on,
so the original libvirt code did not add a netmask to the dnsmasq
commandline (or later, the dnsmasq conf file).
For *IPv6* however, dnsmasq apparently cannot automatically determine
the prefix (functionally the same as a netmask), and it must be
explicitly provided in the conf file (as a part of the dhcp-range
option). So many years after IPv4 DHCP support had been added, when
IPv6 dhcp support was added the prefix was included at the end of the
dhcp-range setting, but only for IPv6.
A user had reported a bug on a host where one of the interfaces was a
superset of the libvirt network where dhcp is needed (e.g., the host's
ethernet is 10.0.0.20/8, and the libvirt network is 10.10.0.1/24). For
some reason dnsmasq was supplying the netmask for the /8 network to
clients requesting an address on the /24 interface.
This seems like a bug in dnsmasq, but even if/when it gets fixed
there, it looks like there is no harm in just always adding the
netmask to all IPv4 dhcp-range options similar to how prefix is added
to all IPv6 dhcp-range options.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This fixes a bug that has been present since the original version of
the function was pushed in commit 1ab80f3 on Nov. 26 2010 (by me). The
virSocketAddr::len was not being set.
Apparently until now we were always calling
virSocketAddrPrefixToNetmask with virSocketAddr object that was
already (coincidentally) initialized for the proper address family,
but the bug became apparent when trying to use it to fill in an
otherwise uninitialized object.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Most of the code base is fairly consistent about using the name
'uuidstr' when dealing with a formatted human-readable form, and
'uuid' when dealing with the smaller raw bytes form. Fix
snapshot_conf to comply, as well as reducing the scope of a human
string to only the error message that needs it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signal the udev thread the change of `priv->threadQuit` by using the
thread condition.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If the udev thread is stopped, it must be ensured that the watch
handle is also removed from the main loop.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The iohelper is an internal program that's only supposed to
be called by libvirt, and whatever output it might produce
will ultimately be passed to virReportError() or similar.
Since we do not want strings passed to those functions to
contain newlines, we can simply not output them in the first
place.
This is what happens in pretty much all cases already, but
in a couple instances newlines have managed to slip in.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Commit f609cb85 (0.9.5) introduced virDomainSnapshotGetXMLDesc()'s use
of @flags as a subset of virDomainXMLFlags, documenting that 2 of the
3 flags defined at the time would never be valid. Later, commit
28f8dfdc (1.0.0) introduced a new flag, VIR_DOMAIN_XML_MIGRATABLE, but
did not adjust the snapshot documentation to declare it as invalid.
However, since the flag is not accepted as valid by any of the
drivers (remote is just passthrough; esx and vbox don't support flags;
qemu, test, and vz only support VIR_DOMAIN_XML_SECURE), and it is
unlikely that the domain state saved off during a snapshot creation
needs to be migration-friendly (as the snapshot is not the source of
a migration), it is easier to just define an explicit set of supported
flags directly related to the snapshot API rather than trying to
borrow from domain API, and risking confusion if even more domain
flags are added later (in fact, I have an upcoming patch that plans to
add a new flag to virDomainGetXMLDesc that makes no sense for
snapshots).
There is no API or ABI impact (since we purposefully used unsigned int
rather than an enum type in public API, and since the new flag name
carries the same value as the reused name).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit d2a929d4 (0.9.4) defined virDomainSaveImageGetXMLDesc()'s use
of @flags as a subset of virDomainXMLFlags, documenting that 2 of the
3 flags defined at the time would never be valid. Later, commit
28f8dfdc (1.0.0) introduced a new flag, VIR_DOMAIN_XML_MIGRATABLE, but
did not adjust the save image documentation to declare it as invalid.
Later, commit a67e3872 (3.7.0) blindly copied and pasted the same text
into virDomainManagedSaveGetXMLDesc.
However, since the flag is not accepted as valid by any of the
drivers (remote is just passthrough; and qemu is the only supporting
driver for either API, with support for just VIR_DOMAIN_XML_SECURE),
it is easier to just define an explicit set of supported flags
directly related to the save image API rather than trying to borrow
from live domain API, and risking confusion if even more domain flags
are added later (in fact, I have an upcoming patch that plans to add
a new flag to virDomainGetXMLDesc that makes no sense for saved
images). We may someday decide that saved images need to support the
_MIGRATABLE flag, as it is possible to load a saved image with a
different version of libvirt than the one that created it, but that
can be a separate patch if it is ever needed. Meanwhile, it DOES make
sense to reuse the same flags for SaveImage and for ManagedSave (since
ManagedSave is really just sugar for creating a normal SaveImage in a
location controlled by libvirt instead of by the user).
There is no API or ABI impact (since we purposefully used unsigned int
rather than an enum type in public API, and since the new flag name
carries the same value as the old reused name).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Although VIR_DOMAIN_DEF_FORMAT_INACTIVE and VIR_DOMAIN_XML_INACTIVE
happen to have the same value (1<<1), they come from different enums;
and it is nicer to reason about a 'flags' variable if all uses of
that variable are compared against the same enum type. Messed up in
commit 06f75ff2 (3.8.0).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Many drivers had a comment that they did not validate the incoming
'flags' to virDomainGetXMLDesc() because they were relying on
virDomainDefFormat() to do it instead. This used to be the case
(at least since 461e0f1a and friends in 0.9.4 added unknown flag
checking in general), but regressed in commit 0ecd6851 (1.2.12),
when all of the drivers were changed to pass 'flags' through the
new helper virDomainDefFormatConvertXMLFlags(). Since this helper
silently ignores unknown flags, we need to implement flag checking
in each driver instead.
Annoyingly, this means that any new flag values added will silently
be ignored when targeting an older libvirt, rather than our usual
practice of loudly diagnosing an unsupported flag. Add comments
in domain_conf.[ch] to remind us to be extra vigilant about the
impact when adding flags (a new flag to add data is safe if the
older server omitting the requested data doesn't break things in
the newer client; a new flag to suppress data rather than enhancing
the existing VIR_DOMAIN_XML_SECURE may form a data leak or even a
security hole).
In the qemu driver, there are multiple callers all funnelling to
qemuDomainDefFormatBufInternal(); many of them already validated
flags (and often only a subset of the full set of possible flags),
but for ease of maintenance, we can also check flags at the common
helper function.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
qemuProcessQMPStart starts a QEMU process and monitor connection that
can be used by multiple functions possibly for multiple QMP commands.
The QMP exchange to exit capabilities negotiation mode and enter command
mode can only be performed once after the monitor connection is
established.
Move responsibility for entering QMP command mode into the
qemuProcessQMP code so multiple functions can issue QMP commands in
arbitrary orders.
This also simplifies the functions using the connection provided by
qemuProcessQMPStart to issue QMP commands.
Test code now needs to call qemuMonitorSetCapabilities to send the
message to switch to command mode because the test code does not use the
qemuProcessQMP command that internally calls qemuMonitorSetCapabilities.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Multiple QEMU processes for QMP commands can operate concurrently.
Use a unique directory under libDir for each QEMU process to avoid
pidfile and unix socket collision between processes.
The pid file name is changed from "capabilities.pidfile" to "qmp.pid"
because we no longer need to avoid a possible clash with a qemu domain
called "capabilities" now that the processes artifacts are stored in
their own unique temporary directories.
"Capabilities" was changed to "qmp" in the pid file name because these
processes are no longer specific to the capabilities usecase and are
more generic in terms of being used for any general purpose QMP message
exchanges with a QEMU process that is not associated with a domain.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Users qemuProcessQMP struct were always forced to call both
qemuProcessQMPStop and qemuProcessQMPFree when they are done with the
process. We can just call qemuProcessQMPStop from qemuProcessQMPFree and
let users call qemuProcessQMPFree only.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuProcessQMPNew is one of the public functions used to create and
manage a QEMU process for QMP command exchanges outside of domain
operations.
Add descriptive comment block, debug statement and make source
consistent with the cleanup / VIR_STEAL_PTR format used elsewhere.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The monitor config data is removed from the qemuProcessQMP struct.
The monitor config data can be initialized immediately before call to
qemuMonitorOpen and does not need to be maintained after the call
because qemuMonitorOpen copies any strings it needs.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move code for setting paths and prepping file system from
qemuProcessQMPNew to qemuProcessQMPInit.
This keeps qemuProcessQMPNew limited to data structures and path
initialization is done in qemuProcessQMPInit.
The patch is a non-functional, cut / paste change, however goto is now
"cleanup" rather than "error".
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Store libDir path in the qemuProcessQMP struct in anticipation of moving
path construction code into qemuProcessQMPInit function.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All code related to QEMU monitor is moved from qemuProcessQMPNew and
qemuProcessQMPInit into qemuProcessQMPConnectMonitor.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is a replacement for qemuProcessQMPRun to make the name consistent
with qemuProcessStart. The original qemuProcessQMPRun function is
renamed as qemuProcessQMPLaunch and becomes one of the simpler functions
called from the main qemuProcessQMPStart entry point. The following
patches will move parts of the code in qemuProcessQMPLaunch to the other
functions (qemuProcessQMPInit and qemuProcessQMPConnectMonitor).
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Keep the pointer to QEMU stderr output in qemuProcessQMP struct instead
of requiring the caller to provide it (and free it).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's push the call to virQEMUCapsLogProbeFailure down the stack to
where the probing failure is detected.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While qemuProcessQMPRun and virQEMUCapsInitQMPMonitor* functions called
from virQEMUCapsInit ignore some errors, the caller of virQEMUCapsInit
would report an error unless usedQMP is true anyway. And since usedQMP
can only be true if the probing code really succeeded (i.e., no errors
were ignored), we can just simplify the logic by not ignoring the errors
in the first place.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function contains two almost identical parts. Let's consolidate them
into a single helper function and call it twice.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In new process code, move from model where qemuProcessQMP struct can be
used to activate a series of Qemu processes to model where one
qemuProcessQMP struct is used for one and only one Qemu process.
By allowing only one process activation per qemuProcessQMP struct, the
struct can safely store process outputs like status and stderr, without
being overwritten, until qemuProcessQMPFree is called.
By doing this, process outputs like status and stderr can remain stored
in the qemuProcessQMP struct without being overwritten by subsequent
process activations.
The forceTCG parameter (use / don't use KVM) will be passed when the
qemuProcessQMP struct is initialized since the qemuProcessQMP struct
won't be reused.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virQEMUCapsInitQMP now stops QEMU process in all execution paths,
before freeing the process structure.
The qemuProcessQMPStop function can be called multiple times without
problems... Won't attempt to stop processes and free resources multiple
times.
Follow the convention established in qemu_process of
1) alloc process structure
2) start process
3) use process
4) stop process
5) free process data structure
The process data structure persists after the process activation fails
or the process dies or is killed so stderr strings can be retrieved
until the process data structure is freed.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
s/qemuProcessQMPAbort/qemuProcessQMPStop/ applied to change function
name used to stop QEMU processes in process code moved from
qemu_capabilities.
No functionality change.
The new name, qemuProcessQMPStop, is consistent with the existing
function qemuProcessStop used to stop Domain processes.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
s/cmd/proc/ in process code imported from qemu_capabilities.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add the const qualifier on non modified strings
(string only copied inside qemuProcessQMPNew)
so that const strings can be used directly in calls to
qemuProcessQMPNew in future patches.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU process code in qemu_capabilities.c is moved to qemu_process.c in
order to make the code usable outside the original capabilities use
cases.
The moved code activates and manages QEMU processes without establishing
a guest domain.
This patch is a straight cut/paste move between files.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
