Commit Graph

11 Commits

Author SHA1 Message Date
Adam Litke
d489b04628 Asynchronous event for BlockJob completion
When an operation started by virDomainBlockPull completes (either with
success or with failure), raise an event to indicate the final status.
This API allow users to avoid polling on virDomainGetBlockJobInfo if
they would prefer to use an event mechanism.

* daemon/remote.c: Dispatch events to client
* include/libvirt/libvirt.h.in: Define event ID and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle the new event
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for block_stream completion and emit a libvirt block pull event
* src/remote/remote_driver.c: Receive and dispatch events to application
* src/remote/remote_protocol.x: Wire protocol definition for the event
* src/remote_protocol-structs: structure definitions for protocol verification
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event
  from QEMU monitor
2011-07-22 13:57:42 +08:00
Eric Blake
c4c59e7228 Revert "Asynchronous event for BlockPull completion"
This reverts commit 12cd77a0c5.

Conflicts:

	python/libvirt-override-virConnect.py
	python/libvirt-override.c
	src/remote/remote_protocol.x
2011-06-24 08:41:24 -06:00
Cole Robinson
7268cb9274 python: Mark event callback wrappers as private
These functions aren't intended to be called directly by users, so mark
them as private.

While we're at it, remove unneeded exception handling, and break some
long lines.
2011-06-21 10:08:48 -04:00
Adam Litke
12cd77a0c5 Asynchronous event for BlockPull completion
When an operation started by virDomainBlockPullAll completes (either with
success or with failure), raise an event to indicate the final status.  This
allows an API user to avoid polling on virDomainBlockPullInfo if they would
prefer to use the event mechanism.

* daemon/remote.c: Dispatch events to client
* include/libvirt/libvirt.h.in: Define event ID and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle the new event
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for block_stream completion and emit a libvirt block pull event
* src/remote/remote_driver.c: Receive and dispatch events to application
* src/remote/remote_protocol.x: Wire protocol definition for the event
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event
  from QEMU monitor

Signed-off-by: Adam Litke <agl@us.ibm.com>
2011-06-14 22:48:42 -06:00
Philipp Hahn
eac63161cc Fix SEGV on exit after domainEventDeregister()
When the last callback is removed using domainEventDeregister(), the
events dispatcher is deregistered from the C-library, but
domainEventsCallbacks is still an empty list.
On shutdown __del__() deregisters the dispatacher again, which SEGVs

	# You need the event-loop implementation from the Python examples;
	# give the file a name which is importable by Python.
	ln examples/domain-events/events-python/event-test.py eloop.py
	python -c 'from eloop import *
	import sys

	def dump(*args): print " ".join(map(str, args))

	virEventLoopPureStart()
	c = libvirt.open("xen:///")
	c.domainEventRegister(dump, None)
	c.domainEventDeregister(dump)
	sys.exit(0)'

domainEventDeregister() needs to delete domainEventCallbacks so subsequent
calls to __del__() and domainEventRegister() choose the right code paths.
Setting it to None is not enough, since calling domainEventRegiser() again
would trigger an TypeError.

Signed-off-by: Philipp Hahn <hahn@univention.de>
2010-07-23 13:26:40 -06:00
Daniel P. Berrange
a6c539445e Ensure we return the callback ID in python events binding
A missing return statement in the python binding meant that
the callers could not get the callback ID, and thus not be
able to unregister event callbacks

* python/libvirt-override-virConnect.py: Add missing return
  statement
2010-07-12 13:41:52 +01:00
Daniel P. Berrange
a711633909 Add missing parameter in python Disk IO error callback
The IO error callback was forgetting to pass the action
parameter, causing a stack trace when IO errors arrive

* python/libvirt-override-virConnect.py: Add missing action
  parameter in IO error callback
2010-06-25 14:39:37 +01:00
Daniel P. Berrange
34dcbbb470 Add support for another explicit IO error event
This introduces a new event type

   VIR_DOMAIN_EVENT_ID_IO_ERROR_REASON

This event is the same as the previous VIR_DOMAIN_ID_IO_ERROR
event, but also includes a string describing the cause of
the event.

Thus there is a new callback definition for this event type

typedef void (*virConnectDomainEventIOErrorReasonCallback)(virConnectPtr conn,
                                                           virDomainPtr dom,
                                                           const char *srcPath,
                                                           const char *devAlias,
                                                           int action,
                                                           const char *reason,
                                                           void *opaque);

This is currently wired up to the QEMU block IO error events

* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
  IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
  and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
  for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
  events to application
* src/remote/remote_protocol.x: Wire protocol definition for
  IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
  from QEMU monitor
2010-04-30 15:52:59 +01:00
Daniel P. Berrange
631c4ce855 More event callback fixes
In a couple of cases typos meant we were firing the wrong type
of event. In the python code my previous commit accidentally
missed some chunks of the code.

* python/libvirt-override-virConnect.py: Add missing python glue
  accidentally left out of previous commit
* src/conf/domain_event.c, src/qemu/qemu_monitor_json.c: Fix typos
  in event name / method name to invoke
2010-04-09 16:24:28 +01:00
Daniel P. Berrange
6df7d55d39 Fix up python bindings for new event callbacks
The generator was disabled for the new event callbacks, since they
need to be hand written. This patch  adds the C and python glue to
expose the new APIs in the python binding. The python example
program is extended to demonstrate of the code

* python/libvirt-override.c: Registration and dispatch of events
   at the C layer
* python/libvirt-override-virConnect.py: Python glue for events
* examples/domain-events/events-python/event-test.py: Demo use
  of new event callbacks
2010-04-08 12:41:40 +01:00
Daniel P. Berrange
f991a00653 Re-arrange python generator to make it clear what's auto-generated
* README: New file describing what each file is used for
* livvirt-override.c, libvirt-override.py, libvirt-override-api.xml,
  libvirt-override-virConnect.py: Manually written code overriding
  the generator
* typewrappers.c, typewrappers.h: Data type wrappers
* generator.py: Automatically pre-prend contents of libvirt-override.py
  to generated libvirt.py. Output into libvirt.py directly instead of
  libvirtclass.py. Don't generate libvirtclass.txt at all. Write C
  files into libvirt.c/.h directly
* Makefile.am: Remove rule for creating libvirt.py from libvirt-override.py
  and libvirtclass.py, since generator.py does it directly
2009-09-21 14:41:46 +01:00