Precalculate the lenght to avoid use of 'virStringListAdd' in a loop.
The code is also simplified by using APIs which don't return errors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since adding and removing is the main use case for the macmap module,
convert the code to a more efficient data structure.
The refactor also optimizes the loading from file where previously we'd
do a hash lookup + list lenght calculation for every entry.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The conversion removes the use of virStringListAdd/virStringListRemove
which try to add dynamic properties to a string list which is really
inefficient.
Storing the dbus VMState ids in a GSList is pretty straightforward and
the slightly increased complexity of the code will be paid back by
removing the string list helpers later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The iner loop copies the 'resources' array multiple times using
'virStringListAdd' which has O(n^2) complexity.
Pre-calculate the length so we can allocate the array upfront and just
copy the strings in the loop.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pre-allocate a buffer for the upper limit and shrink it afterwards to
avoid use of 'virStringListAdd' in a loop.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pre-allocate the list to the upper bound and fill it gradually. Since
the data is kept long-term and the list won't be populated much shrink
it to the actual size after parsing.
While using 'virStringListAdd' here wouldn't be as expensive as this
function is used just once, the removal will allow to remove
'virStringListAdd' altogether to discourage the antipattern it promotes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already know the upper bound of items we might need so we can
allocate the array upfront and avoid the quadratic complexity of
'virStringListAdd'.
In this instance the returned data is kept only temporarily so a
potential unused space due to filtered-out entries doesn't impose a
long-term burden on memory.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'virHashGetItems' already returns the number of entries which will be
considered for addition to the list so we can allocate it to the upper
bound upfront rather than growing it in a loop. This avoids the
quadratic complexity of 'virStringListAdd'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'virStringListAdd' calculates the string list length on every invocation
so constructing a string list using it results in O(n^2) complexity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'virStringListAdd' calculates the string list length on every invocation
so constructing a string list using it results in O(n^2) complexity.
Use a GSList which has cheap insertion and iteration and doesn't need
failure handling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
glib's 'g_autoslist()' doesn't support lists of 'char *' strings. Add a
type alias 'virGSListString' so that we can register an 'autoptr'
function for it for simple usage of GSList with strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some code paths return -1 directly while others jump to 'cleanup' which
cleans the list of mounts. Since qemuDomainGetPreservedMounts now
returns a NULL-terminated list, convert devMountsPath to g_auto(GStrv)
and remove the cleanup altoghether.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'i' is used in both outer and inner loop. Since 'devMountsPath' is now a
NULL-terminated list, we can use a GStrv to iterate it;
Additionally rewrite the conditional of adding to the 'unlinkPaths'
array so that it's more clear what's happening.
Fixes: 5c86fbb72d
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor the handling of internals so that NULL-terminated lists are
always returned.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In commit 88957116c9 I've adapted
libvirt to QEMU's deprecation of -mem-path and -mem-prealloc and
switched to memory-backend-* even for system memory. My claim was
that that's what QEMU does under the hood anyway. And indeed it
was: see QEMU commit 900c0ba373aada4c13d47d95330aa72ec4067ba5 and
look at function create_default_memdev().
However, then commit d96c4d5f193e0e45beec80a6277728b32875bddb was
merged into QEMU. While it was fixing a bug, it also changed the
create_default_memdev() function in which it started turning off
use of canonical path (by setting
"x-use-canonical-path-for-ramblock-id" attribute to false). This
wasn't documented until QEMU commit
8db0b20415c129cf5e577a593a4a0372d90b7cc9. The path affects
migration - the same path has to be used on the source and on the
destination. Therefore, if there is old guest started with '-m X'
it has "pc.ram" block which doesn't use canonical path and thus
when migrating to newer QEMU which uses memory-backend-* we have
to turn off the canonical path explicitly. Otherwise,
"/objects/pc.ram" path would be expected by QEMU which doesn't
match the source.
Ideally, we would need to set it only for some machine types
(4.0 and older) because newer machine types already do what we
are doing. However, we treat machine types as opaque strings and
therefore we don't want to parse nor inspect their versions. But
then again, newer machine types already do what we are doing in
this commit, so when old machine types are deprecated and removed
we can remove our hack and forget it ever happened.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1912201
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This capability tracks whether memory-backend-file has
"x-use-canonical-path-for-ramblock-id" attribute. Introduced into
QEMU by commit fa0cb34d2210cc749b9a70db99bb41c56ad20831. As of
QEMU commit 8db0b20415c129cf5e577a593a4a0372d90b7cc9 the property
is considered stable by qemu despite the 'x-' prefix to preserve
compatibility with released qemu versions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The 'conflict' key in a virt_daemon_unit dictionary is not used when
generating systemd service and socket files. The comment associated
with the key claims the default is 'true', and a few build files
needlessly set it to 'true' when defining their virt_daemon_unit.
Remove the 'conflict' key and its use in the affect build files.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When running on host with systemd we register VMs with machined.
In this case systemd creates the root VM cgroup for us. This has some
implications where one of them is that systemd owns all files inside
the root VM cgroup and we should not touch them.
We already use DBus calls for some of the APIs but for the remaining
ones we will continue accessing the files directly. Systemd doesn't
support threaded cgroups so we need to do this.
The reason why we don't use DBus for most of the APIs is that we already
have a code that works with files and we would have to check if systemd
supports each API.
This change introduces new topology on systemd hosts:
$ROOT
|
+- machine.slice
|
+- machine-qemu\x2d1\x2dvm1.scope
|
+- libvirt
|
+- emulator
+- vcpu0
+- vcpu0
compared to the previous topology:
$ROOT
|
+- machine.slice
|
+- machine-qemu\x2d1\x2dvm1.scope
|
+- emulator
+- vcpu0
+- vcpu0
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This will check if the cgroup actually exists on the system.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When we create a new child cgroup and the parent cgroup has any process
attached to it enabling controllers for the child cgroup fails with
error. We need to move the process into the child cgroup first before
enabling any controllers.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove one level of indentation by splitting the condition.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When running on host with systemd we register VMs with machined.
In this case systemd creates the root VM cgroup for us. This has some
implications where one of them is that systemd owns all files inside
the root VM cgroup and we should not touch them.
If we change any value in file that systemd knows about it will be
changed to what systemd thinks it should be when executing
`systemctl daemon-reload`.
These are the APIs that we need to call using systemd because they set
limits that are proportional to sibling cgroups.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The "max" model can be treated the same way as "host" model in general.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a special CPU model similar to "-cpu host", so won't use our
normal CPU model detection logic.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The logic applied in the ppc64 case isn't quite correct, as the
interpretation of maximum mode depends on whether hardware virt
is used or not. This is information the CPU driver doesn't have.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The data reported is the same as for "host-passthrough"
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For hardware virtualization this is functionally identical to the
existing host-passthrough mode so the same caveats apply.
For emulated guest this exposes the maximum featureset supported by
the emulator. Note that despite being emulated this is not guaranteed
to be migration safe, especially if different emulator software versions
are used on each host.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The @vhostuser member of virStorageSource structure is allocated
during parsing in virDomainDiskSourceVHostUserParse() but never
freed leading to a memleak. Since the member is an object it has
to be unrefed instead of g_free()-d.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
After previous patches neither vshReadlineCommandGenerator() nor
vshReadlineOptionsGenerator() use prefix that user wants to
complete. The argument is marked as unused in both functions.
Drop it then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Firstly, move variable declarations into the inner most block
they are used. Secondly, use for() loop instead of while so that
we don't have to advance loop counter explicitly on 'continue'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The way we currently call completer callbacks is that if we've
found --option that user wants to complete value for and it has
callback set then the callback is called.
And just before that, if no --option to have the value completed
is found or is found and is of boolean type then a list of
--option is generated (for given command).
But these two conditions can never be true at the same time
because boolean type of --options do not accept values. Therefore
the calling of completer callback can be promoted onto the same
level as the --option list generation.
This means that merging of two lists can be dropped to and
completer callback can store its retval directly into @list (but
as shown earlier one of the string lists to merge is always
empty).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Completer callbacks generate all possible outputs ignoring any partial
input (e.g. prefix of a domain name) and then use vshCompleterFilter() to
filter out those strings which don't fit the partial input (prefix).
In contrast, vshReadlineCommandGenerator() does some internal filtering and
only generates completions that match a given prefix. Rather than treating
these scenarios differently, simply generate all possible options and
filter them all at the end.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Completer callbacks generate all possible outputs ignoring any partial
input (e.g. prefix of a domain name) and then use vshCompleterFilter() to
filter out those strings which don't fit the partial input (prefix).
In contrast, vshReadlineOptionsGenerator() does some internal filtering and
only generates completions that match a given prefix. Rather than treating
these scenarios differently, simply generate all possible options and
filter them all at the end.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The vshReadlineParse() function is called whenever user hits
<TAB><TAB>. If there is no command (or a partially written one),
then a list of possible commands is printed to the user. But, if
there is a command then its --options are generated. But
obviously, we can not generate --options if there already is an
--option that's expecting a value. For instance, consider:
virsh # start --domain <TAB><TAB>
In this case we want to call completer for --domain option, but
that's a different story.
Anyway, the way that we currently check whether --options list
should be generated is checking the type of the last --option. If
it isn't DATA, STRING, INT, or ARGV (all these expect a value),
then we can generate --option list. Well, writing the condition
this way is needlessly verbose and also prone to errors (see
d9a320bf97 for example).
We know that boolean type does not require a value. This leaves
us with the only type that was not mentioned yet - VSH_OT_ALIAS.
This is a special type for backwards compatibility and it refers
to another --option which can be just any type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
There are two functions that are used to generate completion
lists: vshReadlineCommandGenerator() for command names and
vshReadlineOptionsGenerator() for --options for given command.
Both return a string list, but may also fail while constructing
it. For that case, they call g_strfreev() explicitly, which is
needless since we have g_auto(GStrv).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The vshReadlineOptionsGenerator() function returns a string list
of all --options for given command. But the way that individual
items on the list are allocated can be written better.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The aim of vshCompleterFilter() is to take a string list and a
prefix and remove all strings from the list that don't have the
desired prefix. The function is used to filter out those strings
returned by a completer callback that don't correspond with
user's (partial) input. For instance, domain name completer
virshDomainNameCompleter() returns all domain names and then
vshCompleterFilter() refines the list so that only domains with
correct prefix of their name are offered to user. This was a
design choice - it allows us to have shorter completers as they
do not have to copy the list filtering over and over.
Having said all of that, it may happen that a completer does not
return anything (e.g. there is no domain in requested state,
virsh is not connected and thus completer exited early, etc.). In
that case, the string list is NULL and vshCompleterFilter() can
simply return early.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
This saves us explicit call of g_strfreev() in error path.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
We've invented VSH_OT_ALIAS type for --option so that we can
rewrite some --options (e.g. fix spelling). For instance
blkdeviotune command uses this feature heavily:
--options-with-dash are preferred over old
--options_with_underscore. Both versions are supported but only
the new ones (not aliased) are documented and reported in --help.
Except for options completer, which happily put also aliased
versions in front of user's eyes.
Note, there is a second (gross) way we use aliases: to rewrite
options from --oldoption to --newoption=value (for instance
--shareable option of attach-disk is an alias of
--mode=shareable). And just like with the previous group - don't
generate them into the list of possible options.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
There are few cases where STREQLEN() is called like this:
STREQLEN(var, string, strlen(string))
which is the same as STRPREFIX(var, string). Use STRPREFIX()
because it is more obvious what the check is doing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The version of macOS running on Apple Silicon doesn't need to
concern itself with backwards compatibility with 32-bit
applications, and so it could jettison all the symbol aliasing
shenanigans involved.
https://gitlab.com/libvirt/libvirt/-/issues/121
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
A <machine/> element can have "deprecated" attribute that
corresponds to 'deprecated' member of _virQEMUCapsMachineType
struct. But the member is of boolean type. Therefore, the string
returned by virXMLPropString() must be freed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
