The hyperkitty search facility does a massively better job
than google docs for mailing lists.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Move the docs for the <acpi><table> element under a common section as
it's not specific for direct kernel boot. In fact the original use was
for Windows activation.
Fixes: 72f652da63
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Given that this variable now controls not just whether C tests
are built, but also whether any test at all is executed, the new
name is more appropriate.
Update the description for the corresponding meson option
accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Currently, passing -Dtests=disabled only disables a subset of
tests: those that are written in C and thus require compilation.
Other tests, such as the syntax-check ones and those that are
implemented as scripts, are always enabled.
There's a potentially dangerous consequence of this behavior:
when tests are disabled, 'meson test' will succeed as if they
had been enabled. No indication of this will be shown, so the
user will likely make the reasonable assumption that everything
is fine when in fact the significantly reduced coverage might
be hiding failures.
To solve this issues, disable *all* tests when asked to do so,
and inject an intentionally failing test to ensure that 'meson
test' doesn't succeed.
Best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This patch adds the command line flag `--resume` to the `virsh console`
command. This resumes a paused guest after connecting to the console.
This might be handy since it's a "common" pattern to start a guest
paused, connect to the console, and then resume it so as not to miss any
console messages.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our virBuildPath() constructs a path from given arguments.
Exactly like g_build_filename(), except the latter is more
generic as it uses backslashes on Windows. Therefore, replace the
former with the latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Ever since commit 6e9bd600d7 added a new
GitLab job description function handling the integration test suite
process to ci/jobs.sh it should be mentioned in the docs.
This patch splits the 'Run TCK' section in two, giving user the option
to run the integration test suite in their VM environment the same way
as we do in GitLab CI or execute everything manually.
This patch takes the opportunity to also link to the virtiofs kbase
article to give users a different option to get the local libvirt
repositories to be used in testing inside a VM.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It's mentioned in an earlier paragraph that Perl bindings in correct
version are needed, but there's no note about libvirt even though it
should be obvious. So make a clear note on that and while at it, do
mention the possibility to get upstream libvirt RPMs from GitLab CI
artifacts if users don't feel like building everything on their own.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The fact that we need ci/helper script to run the workloads remains
true, but the invocation has changed as of commit
eb41e45630 . We also extracted GitLab job
specs into a standalone ci/jobs.sh script which allows execution of any
container job we run in upstream CI locally, unlike the original
functionality which only allowed builds, tests and shell (although
important to say it could be adjusted with the right meson/ninja args).
lcitool also became mandatory as it enables the container execution
which replaced a Makefile we used to have for this purpose.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
While wording is still correct to this day, we have already added more
features to lcitool and documented it properly in its repo. Make sure
that we refer the users to lcitool's doc material for further details
on how VMs can be installed locally.
Use the opportunity to bump the OS distro target from Fedora 36 -> 38.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
While we may have needed to run TCK through Avocado by explicitly using
the '--tap' option (still possible), we can get a nice output from
Avocado by default leaving the option out which is exactly what we do
inside GitLab CI environment.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This patch mainly fixes an unfinished sentence that was supposed to
describe the LIBVIRT_CI_INTEGRATION_RUNNER_TAG variable, but took the
opportunity to update the description of the other variable too.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The documented process should be updated to reflect the new process
once GitLab transitions to it completely and drops the old process
involving registration tokens as hinted by the note.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that deleting and reverting external snapshots is implemented we can
report that in capabilities so management applications can use that
information and start using external snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The actual versioning policy[1] is a bit more nuanced, and in
particular there are scenarios in which the monthly release
is intentionally skipped, but overall it's not inaccurate to
claim that the release cadence of the Go bindings follows the
one of the C library.
[1] https://gitlab.com/libvirt/libvirt-go-module/-/blob/master/VERSIONING.rst
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Our test driver lacks implementation for
virConnectGetDomainCapabilities(). Provide one, though a trivial
one. Mostly so that something else than VIR_ERR_NO_SUPPORT error
is returned.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add the ability to specify a path to a ssh-agent socket in order to use
the ssh-agent to authenticate to remote ssh disks. Example
configuration:
<disk type='network'>
</source protocol='ssh' ...>
<identity username='myusername' agentsock='/path/to/socket'/>
...
</source>
...
</disk>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Authenticating via key file to an ssh server is often preferable to
logging in via password. In order to support this functionality add a
new <identity> xml element for ssh disks that allows the user to specify
a keyfile and username. Example configuration:
<disk type='network'>
<source protocol='ssh' ...>
<identity keyfile='/path/to/id_rsa' username='myusername'/>
...
</source>
...
</disk>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In order to make ssh disks usable, we need to be able to validate a
remote host. To do this, add a <knownHosts> xml element for ssh disks to
allow the user to specify a location for a file that contains known host
keys. Implementation to follow.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Right now, ssh network disks are not usable. There is some basic support
in libvirt that is meant to support disk chains that have backing disks
located at ssh urls, but there is no real way for a user to configure a
ssh-based disk. This commit allows users to configure an ssh disk with
password authentication. Implementation will follow.
<disk type='network'>
<source protocol='ssh' ...>
<auth username='myusername'>
<secret type='iscsi' usage='secretname'/>
</auth>
</disk>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Removing a backing image could break other image chains as it's
theoretically possible to share backing chains.
As --storage/--remove-all-storage is fully implemented in virsh as a
helper option, which enumerates and deletes VM's volumes. We do not plan
to make it any more complicated.
Document that backing chains are not removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Meson doesn't interpret what's set in CFLAGS, but rather simply appeds
it to the command line. Thus any logic which is based on the
optimization level will not work.
Note the caveat in the docs and instruct users to use
``--optimization=N`` instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Domain related hook scripts are all fed with domain XML on their
stdin, except for bhyve. Fix this.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/528
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have bhyve hook scripts since v6.1.0-rc1~42 but never mention
them in hooks.rst. Fill the blanks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our hooks.rst document existence of libxl hook scripts, but
mentions only qemu and lxc as receivers of full domain XML. But
since their introduction in v2.2.0-rc1~201 they are also given
full domain XML. Fix our wording.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change example logfile path and clarify how complicated all things passt
are. I chose not to create the non-existing directory because it could
open a whole new can of worms.
Also explain missing `dev` attribute of `<portForward/>`
Resolves: https://issues.redhat.com/browse/RHEL-1833
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reverting external snapshot for running VM doesn't work correctly so we
should not report this capability until it is fixed.
This reverts commit de71573bfe.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
--driver can now be used to specify a specific driver to bind to the
device being detached from the host driver (e.g. vfio-pci-igbvf), not
just the *type* of driver (e.g. "vfio" or "xen", which are unnecessary
anyway, since they are implicit in which hypervisor driver is in use)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This introduces the ability to set the discard granularity option
for a disk. It defines the smallest amount of data that can be
discarded in a single operation (useful for managing and
optimizing storage).
However, most hypervisors automatically set the proper discard
granularity and users usually do not need to change the default
setting.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Note the implications and caveats of <disk type='dir'>.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/519
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adds two new commands and a new option:
- 'net-desc' to show/modify network title and description.
- 'net-metadata' to show/modify network metadata.
- Option '--title' for 'net-list' to print corresponding
network titles in an additional column.
- Documentation for all the above.
- XML Fallback function `virshNetworkGetXMLFromNet` for title and
description for compatibility with hosts running older versions
of libvirtd.
Signed-off-by: K Shiva Kiran <shiva_kr@riseup.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds new elements <title> and <description> to the Network XML.
- The <title> attribute holds a short title defined by the user and
cannot contain newlines.
- The <description> attribute holds any documentation that the user
wants to store.
- Schema definitions of <title> and <description> have been moved from
domaincommon.rng to basictypes.rng for use by network and future objects.
- Added Network XML parser logic for the above.
Signed-off-by: K Shiva Kiran <shiva_kr@riseup.net>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that deleting and reverting external snapshots is implemented we can
report that in capabilities so management applications can use that
information and start using external snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Libvirt supports creating snapshots for a long time but the wording of
the feature may imply that libvirt supports external snapshots in
general but that is not true as users were not able to use APIs to
delete or revert external snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We still get MRs in Gitlab from individual contributors on a regular
basis which in some ways just makes maintainer's or reviewer's life
just a bit more complicated. This ultimately means our guidelines are
probably not visible enough on the main page
(or some people wouldn't read them anyway). While this patch can't make
the problem go away, it can at least attempt to mitigate it by creating
a quick link to the 'hacking' page, skipping a lot of TL;DR contents
in contributing.rst which we link from the main page.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
These two attributes are supported for vhost-user-blk as well.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A test case can be part of a test suite (just like we already
have 'syntax-check'). This then allows developers to run only a
subset of tests. For instance - when using valgrind test setup
(`meson test -C _build/ --setup valgrind`) it makes zero sense to
run syntax-check tests or other script based tests (e.g.
check-augeas-*, check-remote_protocol, etc.). What does makes
sense is to run compiled binaries.
Strictly speaking, reaching that goal is as trivial as annotating
only those compiled tests (declared in tests/meson.build) and
running them selectively:
meson test -C _build/ --setup valgrind --suite $TAG
But it may be also desirable to run test scripts separately.
Therefore, introduce two new tags: 'bin' for compiled tests, and
'script' for script based tests and annotate each test()
accordingly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add async-teardown to the features list in domain capabilities allowing
high level management to introspect the availability of the asynchronous
teardown feature.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add some additional information about running clangd for LSP when clang
is not your normal compiler.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-By: Tim Small <tim@seoss.co.uk>
Minor rewording to clarify purpose of the -C flag in the ninja
invocation, whilst retaining previous meaning.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the explicit meson "setup" command instead of the deprecated
implicit invocation. The implied setup usage generates a warning with
meson version 1.0.1:
WARNING: Running the setup command as `meson [options]` instead of
`meson setup [options]` is ambiguous and deprecated.
Additionally the implicit command is likely to be confusing to those
unfamiliar with Meson - the `build` argument in `meson build` resembles
an action rather than an arbitrary path.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Suggest that new contributors should review past patch submissions for
typical style, feedback etc. prior to submitting. Link to archives.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In the preparing patches section, note that it is possible to run CI
tests via gitlab prior to submitting patches.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Clarify that patches should apply cleanly to the master branch. Give
guidance for typical bug fix process for existing releases.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In build environments which use gcc as the default compiler, use of the
clangd LSP server (for enhanced code editing and navigation etc.) with
libvirt requires some additional configuration. Detail this and link
from `hacking.rst`.
Signed-off-by: Tim Small <tim@seoss.co.uk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
