Quite a long time ago, (apparently between qemu 0.12 and 0.13) qemu
quietly began supporting the optional specification of a domain in the
host-side address of all pci passthrough commands (by simply
prepending it to the bus:slot.function format, as
"dddd:bb:ss.f"). Since machines with multiple PCI domains are very
rare, this never came up in practice, so libvirt was never updated to
support it.
This patch takes the first step to supporting specification of a non-0
domain in the host-side address of PCI devices being assigned to a
domain, by adding a capability bit to indicate support
"QEMU_CAPS_HOST_PCI_MULTIDOMAIN", and detect it. Since this support
was added in a version prior to the minimum version required for
QMP-style capabilities detection, the capability is always enabled for
any qemu that uses QMP for capabilities detection. For older qemus,
the only clue that a domain can be specified in the host pci address
is the presence of the string "[seg:]" in the help string for
-pcidevice. (Ironically, libvirt will not be modified to support
specification of domain for -pcidevice, since any qemu new enough for
us to care about also supports "-device pci-assign" or "-device
vfio-pci", which are greatly preferred).
The test case average timing code has not been used by any test
case ever. Delete it to remove complexity.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add an attribute named 'removable' to the 'target' element of disks,
which controls the removable flag. For instance, on a Linux guest it
controls the value of /sys/block/$dev/removable. This option is only
valid for USB disks (i.e. bus='usb'), and its default value is 'off',
which is the same behaviour as before.
To achieve this, 'removable=on' (or 'off') is appended to the '-device
usb-storage' parameter sent to qemu when adding a USB disk via
'-disk'. A capability flag QEMU_CAPS_USB_STORAGE_REMOVABLE was added
to keep track if this option is supported by the qemu version used.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=922495
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Allow use of the usb-storage device only if the new capability flag
QEMU_CAPS_DEVICE_USB_STORAGE is set, which it is for qemu(-kvm)
versions >= 0.12.1.2-rhel62-beta.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=981094
The commit 0ad9025ef introduce qemu flag QEMU_CAPS_DEVICE_VIDEO_PRIMARY
for using -device VGA, -device cirrus-vga, -device vmware-svga and
-device qxl-vga. In use, for -device qxl-vga, mouse doesn't display
in guest window like the desciption in above bug.
This patch try to use -device for primary video when qemu >=1.6 which
contains the bug fix patch
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Actually, I'm turning this function into a macro as filename,
function name and line number needs to be passed. The new
function virAsprintfInternal is introduced with the extended set
of arguments.
Adding two cap flags for scsi-generic:
QEMU_CAPS_SCSI_GENERIC
QEMU_CAPS_SCSI_GENERIC_BOOTINDEX
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
Currently, -machine option is used only when dump-guest-core is set.
To use options defined in machine option for newer version of QEMU,
it needs to use -machine xxx, and to be compatible with older version
-M, this patch adds QEMU_CAPS_MACHINE_OPT capability for newer
version which supports -machine option.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Allow migration over IPv6 by listening on [::] instead of 0.0.0.0
when QEMU supports it (QEMU_CAPS_IPV6_MIGRATION) and there is
at least one v6 address configured on the system.
Use virURIParse in qemuMigrationPrepareDirect to allow parsing
IPv6 addresses, which would cause an 'incorrect :port' error
message before.
Move setting of migrateFrom from qemuMigrationPrepare{Direct,Tunnel}
after domain XML parsing, since we need the QEMU binary path from it
to get its capabilities.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=846013
This does nothing more than adding the new device and capability.
The device is present since QEMU 1.2.0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "dtb" option sets the filename for the device tree.
If without this option support, "-dtb file" will be converted into
<qemu:commandline> in domain XML file.
For example, '-dtb /media/ram/test.dtb' will be converted into
<qemu:commandline>
<qemu:arg value='-dtb'/>
<qemu:arg value='/media/ram/test.dtb'/>
</qemu:commandline>
This is not very friendly.
This patchset add special <dtb> tag like <kernel> and <initrd>
which is easier for user to write domain XML file.
<os>
<type arch='ppc' machine='ppce500v2'>hvm</type>
<kernel>/media/ram/uImage</kernel>
<initrd>/media/ram/ramdisk</initrd>
<dtb>/media/ram/test.dtb</dtb>
<cmdline>root=/dev/ram rw console=ttyS0,115200</cmdline>
</os>
Signed-off-by: Eric Blake <eblake@redhat.com>
QEMU_CAPS_VIRTIO_SCSI_PCI implies that virtio-scsi is only supported
for the PCI bus, which is not the case. Remove the _PCI suffix.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
To avoid confusion between 'virCapsPtr' and 'qemuCapsPtr'
do some renaming of various fucntions/variables. All
instances of 'qemuCapsPtr' are renamed to 'qemuCaps'. To
avoid that clashing with the 'qemuCaps' typedef though,
rename the latter to virQEMUCaps.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
QEMU_CAPS_DEVICE_QXL -device qxl
QEMU_CAPS_DEVICE_VGA -device VGA
QEMU_CAPS_DEVICE_CIRRUS_VGA -device cirrus-vga
QEMU_CAPS_DEVICE_VMWARE_SVGA -device vmware-svga
QEMU_CAPS_DEVICE_VIDEO_PRIMARY /* safe to use -device XXX
for primary video device */
Fix a typo in qemuCapsObjectTypes, the string 'qxl' here
should be -device qxl rather than -vga [...|qxl|..]
Both generated with
qemu-system-x86_64 --help > qemu-1.2.0
qemu-system-x86_64 \
-device ? \
-device pci-assign,? \
-device virtio-blk-pci,? \
-device virtio-net-pci,? \
-device scsi-disk,? \
-device PIIX4_PM,? \
-device usb-redir,? \
-device ide-drive,? \
-device usb-host,? 2> qemu-1.2.0-device
It seems I missed a few -device flags when doing this last time and I
mixed up qemu and qemu-kvm.
Currently it's assumed that qemu always supports VNC, however it is
definitely possible to compile qemu without VNC support so we should at
the very least check for it and handle that correctly.
With the recent introduction of QMP capabilities probing, libvirt failed
to detect support for QXL graphics in QEMU 1.2 and newer. In addition to
fixing that, this patch also causes libvirt to detect QXL support for
qemu-kvm-0.13.0, which doesn't advertise it in -help output but mentions
it in device list. Since qemu-kvm-0.13.0 supported -spice, it looks like
not having qxl in -help was a bug.
Currently the qemuCapsParseDeviceStr method has a bunch of open
coded string searches/comparisons to detect devices and their
properties. Soon this data will be obtained from QMP queries
instead of -device help output. Maintaining the list of device
and properties in two places is undesirable. Thus the existing
qemuCapsParseDeviceStr() method needs to be refactored to
separate the device types and properties from the actual
search code.
Thus the -device help output is now parsed to construct a
list of device names, and device properties. These are then
checked against a set of datatables to set the capability
flags
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The "dump-guest-core' option is new option for the machine type
(-machine pc,dump-guest-core) that controls whether the guest memory
will be marked as dumpable.
While testing this, I've found out that the value for the '-M' options
is not parsed correctly when additional parameters are used. However,
when '-machine' is used for the same options, it gets parsed as
expected. That's why this patch also modifies the parsing and creating
of the command line, so both '-M' and '-machine' are recognized. In
QEMU's help there is only mention of the 'machine parameter now with
no sign of the older '-M'.
The current qemu capabilities are stored in a virBitmapPtr
object, whose type is exposed to callers. We want to store
more data besides just the flags, so we need to move to a
struct type. This object will also need to be reference
counted, since we'll be maintaining a cache of data per
binary. This change introduces a 'qemuCapsPtr' virObject
class. Most of the change is just renaming types and
variables in all the callers
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
After discussion with DB we decided to rename the new iolimit
element as it creates the impression it would be there to
limit (i.e. throttle) I/O instead of specifying immutable
characteristics of a block device.
This is also backed by the fact that the term I/O Limits has
vanished from newer storage admin documentation.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Implementation of iolimits for the qemu driver with
capability probing for block size attribute and
command line generation for block sizes.
Including testcase for qemuxml2argvtest.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
QEMU_CAPS_SCSI_LSI
set the flag when "lsi53c895a", bus PCI, alias "lsi" in
the output of "qemu -device ?"
-device lsi in qemu command line
QEMU_CAPS_VIRTIO_SCSI_PCI
set the flag when "name "virtio-scsi-pci", bus PCI" in
the output of qemu devices query.
-device virtio-scsi-pci in qemu command line
This patch adds the capability in libvirt to check if
-netdev bridge option is supported or not.
Signed-off-by: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: Corey Bryant<coreyb@linux.vnet.ibm.com>
QEMU 1.1.0 has been officially released. With 1.1.0 QEMU went back to
three-digits version even for the initial release and I renamed the data
files to match this fact. They were generated with
qemu-system-x86_64 -help >tests/qemuhelpdata/qemu-1.1.0
qemu-system-x86_64 \
-device ? \
-device pci-assign,? \
-device virtio-blk-pci,? \
-device virtio-net-pci,? \
-device scsi-disk,? 2>tests/qemuhelpdata/qemu-1.1.0-device
Thanks to this new option we are now able to use modern CPU models (such
as Westmere) defined in external configuration file.
The qemu-1.1{,-device} data files for qemuhelptest are filled in with
qemu-1.1-rc2 output for now. I will update those files with real
qemu-1.1 output once it is released.
A "ide-drive" device can be either a hard disk or a CD-ROM,
if there is ",media=cdrom" specified for the backend, it's
a CD-ROM, otherwise it's a hard disk.
Upstream qemu splitted "ide-drive" into "ide-hd" and "ide-cd"
since commit 1f56e32, and ",media=cdrom" is not required for
ide-cd anymore. "ide-drive" is still supported for backwards
compatibility, but no doubt we should go foward.
A "scsi-disk" device can be either a hard disk or a CD-ROM,
if there is ",media=cdrom" specified for the backend, it's
a CD-ROM, otherwise it's a hard disk.
But upstream qemu splitted "scsi-disk" into "scsi-hd" and
"scsi-cd" since commit b443ae, and ",media=cdrom" is not
required for scsi-cd anymore. "scsi-disk" is still supported
for backwards compatibility, but no doubt we should go
foward.
The qemu developers have made it clear that modern qemu will no
longer guarantee human monitor command stability; furthermore,
some features, such as async events, are only supported via qmp.
If we are compiled without support for handling JSON, we cannot
expect to sanely interact with modern qemu.
However, things must continue to build on RHEL 5, where qemu
is stuck at 0.10, and where yajl is not available.
Another benefit of this patch: future additions of new monitor
commands need only focus on qemu_monitor_json.c, instead of
also wasting time with qemu_monitor_text.c.
* src/qemu/qemu_capabilities.c (qemuCapsComputeCmdFlags): Report
error if yajl is missing but qemu requires qmp.
(qemuCapsParseHelpStr): Propagate error.
(qemuCapsExtractVersionInfo): Update caller.
* tests/qemuhelptest.c (testHelpStrParsing): Likewise.
I'm getting tired of remembering to backport RHEL-specific
patches when building upstream libvirt on RHEL 6.x or CentOS.
All the affected versions of RHEL qemu-kvm have backported
enough patches to a) make JSON useful, and b) modify the
-help text to mention libvirt as the preferred interface;
which means this string in the help output is a reliable
indicator that we can outsmart a strict version check,
even when upstream qemu 0.12 lacked the needed features.
* src/qemu/qemu_capabilities.c (qemuCapsComputeCmdFlags):
Recognize particular help string present when enough features were
backported to be worth using JSON.
* tests/qemuhelptest.c (mymain): Update tests accordingly.
