Refresh the state of the jobs and process any events that might have
happened while libvirt was not running.
The job state processing requires some care to figure out if a job
needs to be bumped.
For any invalid job try doing our best to cancel it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add the infrastructure to handle block job events in the -blockdev era.
Some complexity is required as qemu does not bother to notify whether
the job was concluded successfully or failed. Thus it's necessary to
re-query the monitor.
To minimize the possibility of stuck jobs save the state into the XML
prior to handling everything so that the reconnect code can potentially
continue with the cleanup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add support for handling the event either synchronously or
asynchronously using the event thread.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With blockdev we'll need to use the JOB_STATUS_CHANGE so gate the old
events by the blockdev capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new state is entered when qemu finished the job but libvirt does
not know whether it was successful or not.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the blockjob handling code deals with the status XML we don't
need to save it explicitly when starting blockjobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that block job data is stored in the status XML portion we need to
make sure that everything which changes the state also saves the status
XML. The job registering function is used while parsing the status XML
so in that case we need to skip the XML saving.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to store the block job state in the status XML so that we can
properly recover any data when reconnecting after startup and also in
the end to be able to do any transition of the backing chain that
happened while libvirt was not connected to the monitor.
First step is to note the name, type, state and corresponding disk into
the status XML.
We also need to make sure that a broken blockjob does not make libvirt
lose the VM, thus many of the errors just mark the job as invalid.
Later on we'll cancel all invalid jobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The job data saved in the XML may be partially invalid e.g. if something
is missing. To prevent losing a domain with such a job add a flag to the
job data so that job APIs can ignore such a job and we can just cancel
it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When parsing the status XML we need to register all existing jobs.
Export the functions so that they are usable in other modules.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Later on we'll format these values into the status XML so the from/to
string functions will come handy. The implementation also notes that
these will be used in the status XML to avoid somebody changing the
values.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add the job structure to the table when instantiating a new job and
remove it when it terminates/fails.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Block jobs currently belong to disks only so we can look up the block
job data for them in the corresponding disks. This won't be the case
when using blockdev as certain jobs don't even correspond to a disk and
most of them can run on a part of the backing chain.
Add a global table of blockjobs which can be used to look up the data
for the blockjobs when the job events need to be processed.
The table is a hash table organized by job name and has a reference to
the job. New and running jobs will later be added to this table.
Reference counting will allow to reap job state for synchronous callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The legacy job handler does not look at the old job state so we can
update it earlier.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no need to do it if the job is not completed. The new helper
allows to do this with much less hassle in the correct place.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename and move qemuBlockJobTerminate to qemuBlockJobUnregister and
separate bits from qemuBlockJobDiskNew which register the job with the
disk. This creates an unified interface for other APIs to use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to qemuDomainSaveStatus add a helper to save the config XML
named qemuDomainSaveConfig.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename qemuDomainObjSaveJob and create a wrapper for it which does not
require 'driver' to be passed and export it so that other palces can
easily save the status XML without having to invoke virDomainSaveStatus
which has unpleasing parameters.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Test the output against the schema and also against what we expect.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tests will need to parse such a definition so it also needs to be freed.
Provide a function for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU allows us to create storage on certain network protocols which
allow image creation through their API. Wire up the generator for using
it with libvirt as well as for local files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'blockdev-add' allows us to use qemu to format images to our desired
format. This patch implements helpers which convert a
virStorageSourcePtr into JSON objects describing the required
configuration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To allow using -blockdev with blockjobs QEMU needs to reopen files in
read-write mode when modifying the backing chain. To achieve this we
need to use 'auto-read-only' for the backing files rather than the
normal 'read-only' property. That way qemu knows that the files need to
be reopened.
Note that the format drivers (e.g. qcow2) are still opened with the
read-only property enabled when being a member of the backing chain
since they are supposed to be immutable unless a block job is started.
QEMU v4.0 (since commit 23dece19da4) allows also dynamic behaviour for
auto-read-only which allows us to use sVirt as we only grant write
permissions to files when doing a blockjob.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To allow reusing the formatters in the code for creating JSON properties
for 'blockdev-create' we need to create everything except the 'driver'
attribute.
Use the new helper virJSONValueObjectPrependString to put the driver at
the same place so that we don't change any output.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Libvirt treats the JSON objects as lists thus the values appear in the
order they were added. To avoid too much changes introduce a helper
which allows to prepend a string which will allow to keep certain
outputs in order.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add testing of the host specification part so that we can be sure that
no image/host specific data will be present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When formatting new qcow2 images we need to provide the backing store
string which should not contain any authentication or irrelevant data.
Add a flag for qemuBlockStorageSourceGetBackendProps which allows to
skip the irrelevant data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'blockdev-create' starts a job which creates a storage volume using
the given protocol or formats an existing (added) volume with one of the
supported storage formats.
This patch adds the monitor interaction bits.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new event is a superset of the BLOCK_JOB* events and also covers
jobs which don't bind to a VM disk.
In this patch the monitor part is implemented.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This belongs to the new job management API which can manage also
non-block based jobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This belongs to the new job management API which can manage also
non-block based jobs. Since we'll need to be able to attempt to cancel
jobs which potentially were not started (during reconnect) the 'quiet'
flag allows to suppress errors reported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This belongs to the new job management API for generic jobs.
The dismiss command is meant to remove a concluded job after we were
able to get the final status.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow using the delayed dismiss of the job so that we can reap the state
even if libvirtd was not running when qemu emitted the job completion
event.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow using the node name to specify the base and top of the 'commit'
operation, allow specifying explicit job name and add support for
delayed dismiss of the job so that we can reap the state even if
libvirtd was not running when qemu emitted the job completion event.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow using the node name to specify the base of the 'stream' operation,
allow specifying explicit job name and add support for delayed dismiss
of the job so that we can reap the state even if libvirtd was not
running when qemu emitted the job completion event.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When querying storage metadata after a block job we re-run
virStorageFileGetMetadata on the top level storage file. This means that
the workers (virStorageFileGetMetadataInternal) must not overwrite any
pointers without freeing them.
This was not considered for src->compat and src->features. Fix it and
add a comment mentioning that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function does not do any cleanup, so replace the 'cleanup' label
with return of -1 and the 'done' label with return of 0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since fb9f6ce625 we are including a libxml header file in the
network driver but never link with it. This hasn't caused an
immediate problem because in the end the network driver links
with libvirt.la. But apparently, it's causing a build issue on
old Ubuntu.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is a very simple completer for completing --cap argument of
nodedev-list command.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There are more arguments than 'shutdown --mode' that accept a
list of strings separated by commas. 'nodedev-list --cap' is one
of them. To avoid duplicating code, let's separate interesting
bits of virshDomainShutdownModeCompleter() into a function that
can then be reused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If there are two paths on the list that are the same we need to
lock it only once. Because when we try to lock it the second time
then open() fails. And if it didn't, locking it the second time
would fail for sure. After all, it is sufficient to lock all
paths just once satisfy the caller.
Reported-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Document why we need to sort paths while it's still fresh in my
memory.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
