Commit Graph

1487 Commits

Author SHA1 Message Date
Erik Skultety
2508d10f67 conf: domain: sev: Make 'cbitpos' & 'reducedPhysBits' attrs optional
These XML attributes have been mandatory since the introduction of SEV
support to libvirt. This design decision was based on QEMU's
requirement for these to be mandatory for migration purposes, as
differences in these values across platforms must result in the
pre-migration checks failing (not that migration with SEV works at the
time of this patch).

Expecting the user to specify these is cumbersome and the same XML
cannot be re-used across different revisions of SEV. Since
we have SEV platform information saved in QEMU capabilities, we can
make the attributes optional and should fill them in automatically
in the QEMU driver right before starting it.

Resolves: https://gitlab.com/libvirt/libvirt/-/issues/57

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-10-19 11:03:39 +02:00
Daniel Henrique Barboza
0bf8dfb02a qemu_command.c: move 'panic' validation to qemu_validate.c
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-10-15 10:54:33 -03:00
Daniel Henrique Barboza
da1748cab1 qemu_command.c: move DISK_BUS_SATA validation to qemu_validate.c
A few tweaks were made during the move:

- the error messages were changed to mention 'sata controller'
instead of 'ide controller';

- a check for address type 'drive' was added like it is done
with other bus types. The error message of qemuxml2argdata was
updated to reflect that now, instead of erroring it out from the
common code in virDomainDiskDefValidate(), we're failing earlier
with a different error message.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-10-15 09:55:37 -03:00
Michal Privoznik
76db9e8bcd lib: s/free-page-reporting/freePageReporting/
In fee8a61d29 a new attribute to <memballoon/> was introduced:
free-page-reporting. We don't really like hyphens in attribute
names. Use camelCase instead.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-10-15 10:57:11 +02:00
Nico Pache
4cb5f34905 provide testing for free-page-reporting feature in QEMU
This provides basic testing for the free-page-reporting feature that is
introduced in qemu 5.1.

Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-10-13 17:02:48 +02:00
Michal Privoznik
0c8ab47847 qemu: Don't generate '-machine memory-backend' and '-numa memdev'
In 88957116c9 I've switched to -machine memory-backend=ID and
-object memory-backend-* because QEMU is obsoleting -mem-path
and -mem-prealloc. However, what I did not foresee was that using
-machine memory-backend in combination with -numa is not allowed
in QEMU. This was reported upstream and fortunately not released
yet.

The problem is that if domain has NUMA nodes then we will
generate memory-backend-* objects for NUMA nodes (because if QEMU
is new enough to expose default RAM ID it also supports -numa
memdev=) and adding non-NUMA memory backend is wrong.

Reported-by: Masayoshi Mizuma <msys.mizuma@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-10-08 12:55:10 +02:00
Michal Privoznik
88957116c9 qemu: Use memory-backend-* for regular guest memory
So far, Libvirt configures memory-backend-* for memory hotplug,
possibly NUMA nodes and in a few other cases. This patch
switches to constructing the memory-backend-* command line for
all cases. To keep ability to migrate guests a little hack is
used: the ID of the object is set to the one that QEMU uses
internally anyways. These IDs are stable (first started to appear
somewhere around v0.13.0-rc0~96) and can't change.

In fact, this patch does exactly what QEMU does internally. The
reason for moving the logic into Libvirt is that QEMU wants to
deprecate the old style of specifying memory.

So far, only x84_64 test cases are changed, because tests for
other architectures use older capabilities, which still lack the
QEMU_CAPS_MACHINE_MEMORY_BACKEND capability and they don't report
the RAM ID.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1836043

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-10-01 12:06:22 +02:00
Michal Privoznik
eda5cc7a62 qemuBuildMemoryBackendProps: Move @prealloc setting to backend agnostic part
All three memory backends (-file, -ram and -memfd) have .prealloc
attribute. Since we are setting it only for -file, the
corresponding code lives only under if() that handles that
specific backend. But in near future we will want to set the
attribute for other backends too. Therefore, move the
corresponding code outside of the if().

This causes some .argv files to be changed, but the only change
happening there is move of the attribute (best viewed with:
'git show --color-words=.').

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-10-01 12:01:31 +02:00
Peter Krempa
b74fabe9f6 tests: qemuxml2argv: Fix and enable 'disk-transient' case
We didn't actually use this file. Change the disk type to 'file' so that
it works in qemu and add pre and post-blockdev invocations.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
2020-10-01 09:55:02 +02:00
Sebastian Mitterle
af5fb476da qemuxml2argvtest: Test timer validation for non-x86 arches
Add minimal coverage for non-x86_64 timer validation
from commit 2f5d8ffebe

Signed-off-by: Sebastian Mitterle <smitterl@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2020-09-23 22:48:26 +02:00
Sebastian Mitterle
9ec77eef2d qemuxml2argvtest: Test expected error messages
When an error is expected, the error message will be checked.
This is expressed by creating an additional ".err" file containing
the expected error message.

It is added in order to make sure the expected errors
are not masked by other errors during test execution while
leveraging the existing framework.

In order to keep it simple, an input file cannot be reused
anymore to cover several expected error cases configured
in the test code. An input file can still be reused by creating
a test case specific symlink.

For consistency, the mock needs to report an error now, too,
as every failure must have an error; otherwise a test case will
fail.

Require LC_ALL=C explicitly to make sure error messages are not
localized for testing.

Signed-off-by: Sebastian Mitterle <smitterl@redhat.com>
Suggested-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2020-09-23 22:47:59 +02:00
Daniel Henrique Barboza
63af8fdeb2 qemu: revert latest pSeries NVDIMM design changes
In [1], changes were made to remove the existing auto-alignment
for pSeries NVDIMM devices. That design promotes strange situations
where the NVDIMM size reported in the domain XML is different
from what QEMU is actually using. We removed the auto-alignment
and relied on standard size validation.

However, this goes against Libvirt design philosophy of not
tampering with existing guest behavior, as pointed out by Daniel
in [2]. Since we can't know for sure whether there are guests that
are relying on the auto-alignment feature to work, the changes
made in [1] are a direct violation of this rule.

This patch reverts [1] entirely, re-enabling auto-alignment for
pSeries NVDIMM as it was before. Changes will be made to ease
the limitations of this design without hurting existing
guests.

This reverts the following commits:

- commit 2d93cbdea9
  Revert "formatdomain.html.in: mention pSeries NVDIMM 'align down' mechanic"

- commit 0ee56369c8
  qemu_domain.c: change qemuDomainMemoryDeviceAlignSize() return type

- commit 07de813924
  qemu_domain.c: do not auto-align ppc64 NVDIMMs

- commit 0ccceaa57c
  qemu_validate.c: add pSeries NVDIMM size alignment validation

- commit 4fa2202d88
  qemu_domain.c: make qemuDomainGetMemorySizeAlignment() public

[1] https://www.redhat.com/archives/libvir-list/2020-July/msg02010.html
[2] https://www.redhat.com/archives/libvir-list/2020-September/msg00572.html

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2020-09-22 12:25:34 +02:00
Peter Krempa
f2d90b558f qemuBuildHostdevSCSIAttachPrepare: Propagate 'readonly' flag also for iSCSI
The 'readonly' hostdev property is stored separately from the
virStorageSource as some hostdevs are not described by a virStorage
source. We need to propagate the flag to the virStorage source also for
iSCSI backends as it's used to generate the backend properties.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1868856

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-09-16 09:08:56 +02:00
Peter Krempa
c58c970586 qemuxml2argvtest: hostdev-scsi-virtio-scsi: Add <readonly/> to one of the iSCSI hostdevs
Test a readonly iSCSI backend as well.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-09-16 09:08:56 +02:00
Peter Krempa
2f7ee6914d qemuxml2argvtest: hostdev-scsi-virtio-scsi: Use longer user-alias for SCSI hostdev
Test that we can cope with a long useralias when generating SCSI hostdev
commandline.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-09-15 15:20:23 +02:00
Peter Krempa
e5dc1427d7 qemuDomainPrepareHostdev: Don't base backend nodename on device alias
QEMU's blockdev nodenames which are used to back SCSI/iSCSI hostdevs are
limited to 32 characters. If a user passes a very long user alias as
name of the host device it's easy to end up with a too-long nodename.

To prevent this from happening don't base the nodename on the possibly
user-specified alias but on the normal sequential node name generator.

We then store the name in the status XML for further use.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-09-15 15:20:23 +02:00
Peter Krempa
a669d68336 qemuDomainPrepareHostdev: base hostdev secret object names on backend alias
The secret object is used to pass data to the backend so it's better
fitting to base the secret object name on the SCSI host device backend
name.

Since we store the object alias in the status XML this modification is
safe in regards to existing guests.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-09-15 15:20:23 +02:00
Peter Krempa
baea669e80 qemuxml2argvtest: hostdev-scsi-virtio-scsi: Add hostdev with useralias
Add a SCSI host device with a user-specified alias to illustrate the
upcoming changes.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-09-15 15:20:23 +02:00
Daniel Henrique Barboza
0ccceaa57c qemu_validate.c: add pSeries NVDIMM size alignment validation
The existing auto-align behavior for pSeries has the idea to
alleviate user configuration of the NVDIMM size, given that the
alignment calculation is not trivial to do (256MiB alignment
of mem->size - mem->label_size value, a.k.a guest area). We
align mem->size down to avoid end of file problems.

The end result is not ideal though. We do not touch the domain
XML, meaning that the XML can report a NVDIMM size 255MiB smaller
than the actual size the guest is seeing. It also adds one more
thing to consider in case the guest is reporting less memory
than declared, since the auto-align is transparent to the
user.

Following Andrea's suggestion in [1], let's instead do an
size alignment validation. If the NVDIMM is unaligned, error out
and suggest a rounded up value. This can be bothersome to users,
but will bring consistency of NVDIMM size between the domain XML
and the guest.

This approach will force existing non-running pSeries guests to
readjust the NVDIMM value in their XMLs, if necessary. No changes
were made for x86 NVDIMM support.

[1] https://www.redhat.com/archives/libvir-list/2020-July/msg01471.html

Suggested-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-08-24 18:41:28 +02:00
Peter Krempa
90df0f8288 conf: Add support for initiator IQN setting for iSCSI hostdevs
We already allow controlling the initiator IQN for iSCSI based disks.
Add the same for host devices.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-08-04 15:49:13 +02:00
Wang Xin
493d2769f2 qemu: add support for shmem-{plain, doorbell} role
Role(master or peer) controls how the domain behaves on migration.
For more details about migration with ivshmem, see
https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/system/ivshmem.rst;hb=HEAD

It's a optional attribute in libvirt, and qemu will choose default
role for ivshmem device if the user is not specified.

With device property 'role', the value can be 'master' or 'peer'.
 - 'master' (means 'master=on' in qemu), the guest will copy
   the shared memory on migration to the destination host.
 - 'peer' (means 'master=off' in qemu), the migration is disabled.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Yang Hang <yanghang44@huawei.com>
Signed-off-by: Wang Xin <wangxinxin.wang@huawei.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2020-08-03 10:57:47 +02:00
Peter Krempa
7877e0d2e4 tests: qemucapabitilies: Bump for 5.1 caps to rc2 for x86_64
Note that 'numa-mem-supported' turned off for certain machine types
which in turn forced us to generate a newer command line in certain
tests.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-07-31 10:27:51 +02:00
Peter Krempa
bfe82ec142 tests: qemuxml2argv: Lock in "disk-network-tlsx509-vxhs" case to qemu-5.0.0
QEMU 5.1 will drop the vxhs driver.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-07-31 10:27:51 +02:00
Peter Krempa
e34097750a tests: qemu: Split NBD and VXHS protocol tests
QEMU is going to drop 'vxhs' in the upcoming release so we'll need to
track these separately to prevent test suite breakage.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-07-31 10:27:50 +02:00
Peter Krempa
4a2cbf2108 tests: qemuxml2argv: Use only modern versions of 'disk-network-tlsx509' test
We already test with real caps so there's no real need for this special
case. While it technically tested the state without TLS encryption key
secrets, it doesn't really matter that much.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-07-31 10:27:50 +02:00
Peter Krempa
30932473e1 qemu: caps: Enable QEMU_CAPS_BLOCKDEV_HOSTDEV_SCSI
Enable it when regular QEMU_CAPS_BLOCKDEV is present.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-07-17 07:41:21 +02:00
Michal Privoznik
aeecbc87b7 qemu: Build HMAT command line
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1786303

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-07-08 12:05:24 +02:00
Michal Privoznik
a89bbbac86 conf: Parse and format HMAT
To cite ACPI specification:

  Heterogeneous Memory Attribute Table describes the memory
  attributes, such as memory side cache attributes and bandwidth
  and latency details, related to the System Physical Address
  (SPA) Memory Ranges. The software is expected to use this
  information as hint for optimization.

According to our upstream discussion [1] this is exposed under
<numa/> as <cache/> under NUMA <cell/> and <latency> or
<bandwidth/> under numa/latencies.

1: https://www.redhat.com/archives/libvir-list/2020-January/msg00422.html

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-07-08 12:05:24 +02:00
Michal Privoznik
a26f61ee0c Allow NUMA nodes without vCPUs
QEMU allows creating NUMA nodes that have memory only.
These are somehow important for HMAT.

With check done in qemuValidateDomainDef() for QEMU 2.7 or newer
(checked via QEMU_CAPS_NUMA), we can be sure that the vCPUs are
fully assigned to NUMA nodes in domain XML.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-07-08 12:05:24 +02:00
Peter Krempa
e95da4e5bf qemuBuildMemoryBackendProps: Use boolean type for 'pmem' property
Commit 82576d8f35 used a string "on" to enable the 'pmem' property.
This is okay for the command line visitor, but the property is declared
as boolean in qemu and thus it will not work when using QMP.

Modify the type to boolean. This changes the command line, but
fortunately the command line visitor in qemu parses both 'yes' and 'on'
as true for the property.

https://bugzilla.redhat.com/show_bug.cgi?id=1854684

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-07-08 11:40:18 +02:00
Peter Krempa
ab7b3167b3 tests: qemuxml2argv: Test encrypted TLS key for nbd/vxhs disks
Add a dummy secret so that we see what command line is generated.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2020-07-07 12:58:19 +02:00
Shalini Chellathurai Saroja
18351b1cdf tests: add test with PCI and CCW device
Add test with a ZPCI host device and a CCW memballoon device to ensure
that CCW address remains the default address assigned.

Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2020-06-26 18:53:51 +02:00
Shalini Chellathurai Saroja
780e84c5e8 tests: qemu: add more tests for ZPCI on S390
1. Test for auto-generating uids while specifying valid fids
2. Test for auto-generating fids while specifying valid uids
3. Test for parse error while specifying a valid fid and an invalid
   uid
4. Test for parse error while specifying two ZPCI devices with same
   uid and fid addresses
5. Test for parse error when both uid and fid are set to zero
6. Test for error while specifying uid and not providing ZPCI
   capability.

Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2020-06-26 18:53:51 +02:00
Shalini Chellathurai Saroja
076591009a conf: fix zPCI address auto-generation on s390
Let us fix the issues with zPCI address validation and auto-generation
on s390.

Currently, there are two issues with handling the ZPCI address
extension. Firstly, when the uid is to be auto-generated with a
specified fid, .i.e.:

    ...
    <address type='pci'>
        <zpci fid='0x0000001f'/>
    </address>
    ...

we expect uid='0x0001' (or the next available uid for the domain).
However, we get a parsing error:

    $ virsh define zpci.xml
    error: XML error: Invalid PCI address uid='0x0000', must be > 0x0000
    and <= 0xffff

Secondly, when the uid is specified explicitly with the invalid
numerical value '0x0000', we actually expect the parsing error above.
However, the domain is being defined and the uid value is silently
changed to a valid value.

The first issue is a bug and the second one is undesired behaviour, and
both issues are related to how we (in-band) signal invalid values for
uid and fid. So let's fix the XML parsing to do validation based on what
is actually specified in the XML.

The first issue is also related to the current code behaviour, which
is, if either uid or fid is specified by the user, it is incorrectly
assumed that both uid and fid are specified. This bug is fixed by
identifying when the user specified ZPCI address is incomplete and
auto-generating the missing ZPCI address.

Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2020-06-26 18:53:51 +02:00
Jonathon Jongsma
6c560b2d3a qemu: ramfb video device doesn't support PCI address
Although a ramfb video device is not a PCI device, we don't currently
report an error for ramfb device definitions containing a PCI address.
However, a guest configured with such a device will fail to start:

    # virsh start test1
    error: Failed to start domain test1
    error: internal error: qemu unexpectedly closed the monitor: 2020-06-16T05:23:02.759221Z qemu-kvm: -device ramfb,id=video0,bus=pcie.0,addr=0x1: Device 'ramfb' can't go on PCIE bus

A better approach is to reject any device definitions that contain PCI
addresses.  While this is a change in behavior, any existing
configurations were non-functional.

https://bugzilla.redhat.com/show_bug.cgi?id=1847259

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
2020-06-25 19:47:41 -04:00
Daniel Henrique Barboza
b564332ba7 tests/qemuxml2argvtest.c: add TPM Proxy command line tests
Add tests for both supported scenarios: a single TPM Proxy and
a TPM Proxy with a regular TPM device in the same domain.

Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-06-23 17:27:50 +02:00
Daniel Henrique Barboza
badbd55a3b tests: add XML schema tests for the TPM Proxy device
This tests aims to exercise how a TPM Proxy device can be
added in the domain, either alone or with a regular TPM
device. It also ensures that we do not allow bogus scenarios
to slip by.

Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2020-06-23 17:27:50 +02:00
Menno Lageman
dd1bc914f9 qemu: format address wdith on intel-iommu command line
Format the address width attribute. Depending on the version of
QEMU it is named 'aw-bits' or 'x-aw-bits'.

Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-23 15:53:10 +02:00
Menno Lageman
0e5c919397 conf: add address width attribute to iommu
Add a new aw_bits attribute to the iommu device to control
the address width of the intel-iommu

Signed-off-by Menno Lageman <menno.lageman@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-23 15:51:49 +02:00
Peter Krempa
d74c5c63da qemuxml2argvtest: hostdev-scsi-virtio-scsi: Integrate iSCSI authentication cases
Integrate both 'disk-hostdev-scsi-virtio-iscsi-auth-AES' and
'hostdev-scsi-virtio-iscsi-auth' as the new test infrastructure tests
both legacy and 'secret' object cases.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-23 13:57:14 +02:00
Peter Krempa
c98a7c989e qemuxml2argvtest: hostdev-scsi-virtio-scsi: Integrate 'hostdev-scsi-virtio-iscsi' case
We can add the iSCSI hostdevs to the same test file.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-23 13:57:14 +02:00
Peter Krempa
87a5dbd1e0 qemuxml2argvtest: hostdev-scsi-virtio-scsi: Integrate 'hostdev-scsi-readonly'
This can be tested along with other stuff.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-23 13:57:14 +02:00
Peter Krempa
b0bf1695f7 qemuxml2argvtest: hostdev-scsi-virtio-scsi: Add qemu-2.8 variant
qemu-2.8 didn't yet support QEMU_CAPS_ISCSI_PASSWORD_SECRET. This
version will allow integrating multiple test cases into one.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-23 13:57:14 +02:00
Peter Krempa
aef2c5ea6f qemuxml2argvtest: hostdev-scsi-virtio-scsi: Add "latest" caps version
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-23 13:57:14 +02:00
Peter Krempa
0793052962 qemuxml2argvtest: hostdev-scsi-virtio-scsi: Modernize to qemu-4.1
Modernize the current state to the pre-blockdev version of qemu to
minimize changes. Later patch will add a 'latest' case too.

Additionally this removes duplicated call of the same test.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-23 13:57:14 +02:00
Peter Krempa
4f6f930c76 qemuxml2argvtest: hostdev-scsi-lsi: Integrate 'hostdev-scsi-lsi-iscsi-auth' case
We can add the authenticated iSCSI hostdevs to the same test file.
Additionally this now covers passing secret via the 'secret' object
rather than on the command line.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-23 13:57:13 +02:00
Peter Krempa
86e7bb1c9d qemuxml2argvtest: hostdev-scsi-lsi: Integrate 'hostdev-scsi-lsi-iscsi' case
We can add the iSCSI hostdevs to the same test file.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-23 13:57:13 +02:00
Peter Krempa
448fa53e52 qemuxml2argvtest: hostdev-scsi-lsi: Add test of readonly variant
"hostdev-scsi-readonly" case tests the readonly disk with a virtio-scsi
controller. Add it for the 'lsi' controller test as well.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-23 13:57:13 +02:00
Peter Krempa
f1a24da483 qemuxml2argvtest: hostdev-scsi-lsi: Add "latest" caps version
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-23 13:57:13 +02:00
Peter Krempa
fb4b0a2c4a qemuxml2argvtest: hostdev-scsi-lsi: Add qemu-2.8 variant
qemu-2.8 didn't yet support QEMU_CAPS_ISCSI_PASSWORD_SECRET. This
version will allow integrating multiple test cases into one.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-06-23 13:57:13 +02:00