The differences from virNodeDeviceDettach are very minor:
1) Check that the flags are 0.
2) Set the virPCIDevice's stubDriver according to the driverName that
is passed in.
3) Call virPCIDeviceDetach with a NULL stubDriver, indicating it
should get the name of the stub driver from the virPCIDevice
object.
This requires a custom function for remoteNodeDeviceDetachFlags,
because it is named *NodeDevice, but it goes through the hypervisor
driver rather than nodedevice driver, and so it uses privateData
instead of nodeDevicePrivateData. (It has to go through the hypervisor
driver, because that is the driver that knows about the backend drivers
that will perform the pci device assignment).
The existing virNodeDeviceDettach() assumes that there is only a
single PCI device assignment backend driver appropriate for any
hypervisor. This is no longer true, as the qemu driver is getting
support for PCI device assignment via VFIO. The new API
virNodeDeviceDetachFlags adds a driverName arg that should be set to
the exact same string set in a domain <hostdev>'s <driver name='x'/>
element (i.e. "vfio", "kvm", or NULL for default). It also adds a
flags arg for good measure (and because it's possible we may need it
when we start dealing with VFIO's "device groups").
If the config for a device has specified <driver name='vfio'/>,
"backend" in the pci part of the hostdev object will be set to
..._VFIO. In this case, when creating a virPCIDevice set the
stubDriver to "vfio-pci", otherwise set it to "pci-stub". We will rely
on the lower levels to report an error if the vfio driver isn't
loaded.
The detach/attach functions in virpci.c will pay attention to the
stubDriver setting in the device, and bind/unbind the appropriate
driver when preparing hostdevs for the domain.
Note that we don't yet attempt to do anything to mark active any other
devices in the same vfio "group" as a single device that is being
marked active. We do need to do that, but in order to get basic VFIO
functionality testing sooner rather than later, initially we'll just
live with more cryptic errors when someone tries to do that.
This can be set when the virPCIDevice is created and placed on a list,
then used later when traversing the list to determine which stub
driver to bind/unbind for managed devices.
The existing Detach and Attach functions' signatures haven't been
changed (they still accept a stub driver name in the arg list), but if
the arg list has NULL for stub driver and one is available in the
device's object, that will be used. (we may later deprecate and remove
the arg from those functions).
The device option for vfio-pci is nearly identical to that for
pci-assign - only the configfd parameter isn't supported (or needed).
Checking for presence of the bootindex parameter is done separately
from constructing the commandline, similar to how it is done for
pci-assign.
This patch contains tests to check for proper commandline
construction. It also includes tests for parser-formatter-parser
roundtrips (xml2xml), because those tests use the same data files, and
would have failed had they been included before now.
qemu: xml/args tests for VFIO hostdev and <interface type='hostdev'/>
These should be squashed in with the patch that adds commandline
handling of vfio (they would fail at any earlier time).
A domain's <interface> or <hostdev>, as well as a <network>'s
<forward>, can now have an optional <driver name='kvm|vfio'/>
element. As of this patch, there is no functionality behind this new
knob - this patch adds support to the domain and network
formatter/parser, and to the RNG and documentation.
When the backend is added, legacy KVM PCI device assignment will
continue to be used when no driver name is specified (or if <driver
name='kvm'/> is specified), but if driver name is 'vfio', the new UEFI
Secure Boot compatible VFIO device assignment will be used.
Note that the parser doesn't automatically insert the current default
value of this setting. This is done on purpose because the two
possibilities are functionally equivalent from the guest's point of
view, and we want to be able to automatically start using vfio as the
default (even for existing domains) at some time in the future. This
is similar to what was done with the "vhost" driver option in
<interface>.
There will soon be other items related to pci hostdevs that need to be
in the same part of the hostdevsubsys union as the pci address (which
is currently a single member called "pci". This patch replaces the
single member named pci with a struct named pci that contains a single
member named "addr".
QEMU_CAPS_DEVICE_VFIO_PCI is set if the device named "vfio-pci" is
supported in the qemu binary.
QEMU_CAPS_VFIO_PCI_BOOTINDEX is set if the vfio-pci device supports
the "bootindex" parameter; for some reason, the bootindex parameter
wasn't included in early versions of vfio support (qemu 1.4) so we
have to check for it separately from vfio itself.
POSIX says that both basename() and dirname() may return static
storage (aka they need not be thread-safe); and that they may but
not must modify their input argument. Furthermore, <libgen.h>
is not available on all platforms. For these reasons, you should
never use these functions in a multi-threaded library.
Gnulib instead recommends a way to avoid the portability nightmare:
gnulib's "dirname.h" provides useful thread-safe counterparts. The
obvious dir_name() and base_name() are GPL (because they malloc(),
but call exit() on failure) so we can't use them; but the LGPL
variants mdir_name() (malloc's or returns NULL) and last_component
(always points into the incoming string without modifying it,
differing from basename semantics only on corner cases like the
empty string that we shouldn't be hitting in the first place) are
already in use in libvirt. This finishes the swap over to the safe
functions.
* cfg.mk (sc_prohibit_libgen): New rule.
* src/util/vircgroup.c: Fix offenders.
* src/parallels/parallels_storage.c (parallelsPoolAddByDomain):
Likewise.
* src/parallels/parallels_network.c (parallelsGetBridgedNetInfo):
Likewise.
* src/node_device/node_device_udev.c (udevProcessSCSIHost)
(udevProcessSCSIDevice): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskDeleteVol): Likewise.
* src/util/virpci.c (virPCIGetDeviceAddressFromSysfsLink):
Likewise.
* src/util/virstoragefile.h (_virStorageFileMetadata): Avoid false
positive.
Signed-off-by: Eric Blake <eblake@redhat.com>
Jim Fehlig reported on IRC that older gcc/glibc triggers this warning:
cc1: warnings being treated as errors
qemu/qemu_domain.c: In function 'qemuDomainDefFormatBuf':
qemu/qemu_domain.c:1297: error: declaration of 'remove' shadows a global declaration [-Wshadow]
/usr/include/stdio.h:157: error: shadowed declaration is here [-Wshadow]
make[3]: *** [libvirt_driver_qemu_impl_la-qemu_domain.lo] Error 1
Fix it like we have done in the past (such as commit 2e6322a).
* src/qemu/qemu_domain.c (qemuDomainDefFormatBuf): Avoid shadowing
a function name.
Signed-off-by: Eric Blake <eblake@redhat.com>
When all usb controllers connected to the same bus have <master
startport='x'/> specified, none of them have 'id=usb' assigned and
thus qemu fails due to invalid masterport specification (we use 'usb'
for that purpose). Adding a check that at least one of the
controllers is specified without <master startport='x'/> and in case
this happens, error out due to invalid configuration.
After 9d6e56db the syntax-check was unhappy due to wrong whitespacing:
src/qemu/qemu_command.c:1637: for ( ; a.slot < QEMU_PCI_ADDRESS_SLOT_LAST; a.slot++) {
maint.mk: incorrect whitespace around brackets, see HACKING for rules
make: *** [bracket-spacing-check] Error 1
After 78d7c3c5 we are strdup()-ing path to qemu-bridge-helper.
However, the check for its return value is missing. So it is
possible we've ignored the OOM error silently.
Add a "dry run" address allocation to figure out how many bridges
will be needed for all the devices without explicit addresses.
Auto-add just enough bridges to put all the devices on, or up to the
bridge with the largest specified index.
<controller type='pci' index='0' model='pci-root'/>
is auto-added to pc* machine types.
Without this controller PCI bus 0 is not available and
no PCI addresses are assigned by default.
Since older libvirt supported PCI bus 0 even without
this controller, it is removed from the XML when migrating.
Now we set the default disk driver name when parsing
the qemu command line too, hence all the test changes.
Assume format type is 'auto' when none is specified on
qemu command line.
For pSeries guest in QEMU, NVRAM is one kind of spapr-vio device.
Users are allowed to specify spapr-vio devices'address.
But NVRAM is not supported in libvirt. So this patch is to
add NVRAM device to allow users to specify its address.
In QEMU, NVRAM device's address is specified by
"-global spapr-nvram.reg=xxxxx".
In libvirt, XML file is defined as the following:
<nvram>
<address type='spapr-vio' reg='0x3000'/>
</nvram>
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Currently, if there has been an error in building command line
process after virtual interfaces has been created, the flow jumps
to 'error' label, where virDomainConfNWFilterTeardown() is
called. This may report an error as well, but should not
overwrite the original cause why we jumped to 'error' label.
Instead of making a choice between the underscore and camelCase, this
simply changes "num_queues" into "queues", which is also consistent
with Michal's multiple queue support for interface.
Improve error reporting and generating of SPICE command line arguments
according to the need to enable TLS. If TLS is disabled, there's no need
to pass the certificate dir to qemu.
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=953126
Ensure that all drivers implementing public APIs use a
naming convention for their implementation that matches
the public API name.
eg for the public API virDomainCreate make sure QEMU
uses qemuDomainCreate and not qemuDomainStart
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It will simplify later work if the sub-drivers have dedicated
APIs / field names. ie virNetworkDriver should have
virDrvNetworkOpen and virDrvNetworkClose methods
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The driver.h struct for node devices used an inconsistent
naming scheme 'DeviceMonitor' instead of the more usual
'NodeDeviceDriver'. Fix this everywhere it has leaked
out to.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The driver.h file has no consistent indentation usage across
all the typedefs. Attempts to vertically align struct field
members have also been inconsistently applied. Sanitize the
whitespace used for typedefs & remove all vertical alignment
from structs
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the virDrvXXX method names exactly match
the public APIs virYYY method names. ie XXX == YYY.
Add a test case to prevent any regressions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A number of the remote procedure names did not match the
corresponding API names. For example, many lacked the
word 'CONNECT', others re-arranged the names. Update the
procedures so their names exactly match the API names.
Then remove the special case handling of these APIs in
the generator
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are many declared options in gendispatch.pl that were
no longer used. Those which were used were obscure '-b', '-k'
and '-d'. Switch to use --mode={debug|client|server}.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Switch the function from a bunch of ifs to a switch statement with
correct type and reflow some code.
Also fix comment in enum describing possible graphics types
Decrease size of qemuBuildGraphicsCommandLine() by splitting out
spice-related code into qemuBuildGraphicsVNCCommandLine().
This patch also fixes 2 possible memory leaks on error path in the code
that was split-out. The buffer containing the already generated options
and a listen address string could be leaked.
Also break a few very long lines and reflow code that fits now.
Decrease size of qemuBuildGraphicsCommandLine() by splitting out
spice-related code into qemuBuildGraphicsSPICECommandLine().
This patch also fixes 2 possible memory leaks on error path in the code
that was split-out. The buffer containing the already generated options
and a listen address string could be leaked.
Also break a few very long lines.
Currently the RPC protocol files can contain annotations after
the protocol enum eg
REMOTE_PROC_DOMAIN_SNAPSHOT_LIST_CHILDREN_NAMES = 247, /* autogen autogen priority:high */
This is not very extensible as the number of annotations grows.
Change it to use
/**
* @generate: both
* @priority: high
*/
REMOTE_PROC_DOMAIN_SNAPSHOT_LIST_CHILDREN_NAMES = 247,
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Refactoring done in 19c6ad9ac7 didn't
correctly take into account the order cgroup limit modification needs to
be done in. This resulted into errors when decreasing the limits.
The operations need to take place in this order:
decrease hard limit
change swap hard limit
or
change swap hard limit
increase hard limit
This patch also fixes the check if the hard_limit is less than
swap_hard_limit to print better error messages. For this purpose I
introduced a helper function virCompareLimitUlong to compare limit
values where value of 0 is equal to unlimited. Additionally the check is
now applied also when the user does not provide all of the tunables
through the API and in that case the currently set values are used.
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=950478
1. Handle invalid ULong prefix specified.
When parsing for @prefix as a ULong, a -2 can be returned
if the specification is not a valid ULong.
2. Error out if address= is not specified.
3. Merge netmask process/tests under family tests.
4. Max sure that prefix does not exceed maximum.
.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Create the utility function virSocketAddrGetIpPrefix() to
determine the prefix for this network. The code in this
function was adapted from virNetworkIpDefPrefix().
Update virNetworkIpDefPrefix() in src/conf/network_conf.c
to use the new utility function.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
The change in commit aed4986322
was incomplete, missing a couple of cases of /system. This
caused failure to start VMs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
libvirt/HACKING suggests omitting braces with a
single-line body; this patch fixes the coding style
problem for the Sheepdog storage backend driver.
Signed-off-by: Harry Wei <harryxiyou@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
After discussions with systemd developers it was decided that
a better default policy for resource partitions is to have
3 default partitions at the top level
/system - system services
/machine - virtual machines / containers
/user - user login session
This ensures that the default policy isolates guest from
user login sessions & system services, so a mis-behaving
guest can't consume 100% of CPU usage if other things are
contending for it.
Thus we change the default partition from /system to
/machine
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Wrong use of the parentheses causes "rc" always having a boolean value,
either "1" or "0", and thus we can't get the detailed error message
when it fails:
Before (I only have 1 node):
% virsh numatune f18 --nodeset 12
error: Unable to change numa parameters
error: unable to set numa tunable: Unknown error -1
After:
virsh numatune f18 --nodeset 12
error: Unable to change numa parameters
error: unable to set numa tunable: Invalid argument
http://www.uhv.edu/ac/newsletters/writing/grammartip2009.07.01.htm
(and several other sites) give hints that 'onto' is best used if
you can also add 'up' just before it and still make sense. In many
cases in the code base, we really want the two-word form, or even
a simplification to just 'on' or 'to'.
* docs/hacking.html.in: Use correct 'on to'.
* python/libvirt-override.c: Likewise.
* src/lxc/lxc_controller.c: Likewise.
* src/util/virpci.c: Likewise.
* daemon/THREADS.txt: Use simpler 'on'.
* docs/formatdomain.html.in: Better usage.
* docs/internals/rpc.html.in: Likewise.
* src/conf/domain_event.c: Likewise.
* src/rpc/virnetclient.c: Likewise.
* tests/qemumonitortestutils.c: Likewise.
* HACKING: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=922186
Commit d04916fa introduced a regression in audit quality - even
though the code was computing the proper escaped name for a
path, it wasn't feeding that escaped name on to the audit message.
As a result, /var/log/audit/audit.log would mention a pair of
fields class=path path=/dev/hpet instead of the intended
class=path path="/dev/hpet", which in turn caused ausearch to
format the audit log with path=(null).
* src/conf/domain_audit.c (virDomainAuditCgroupPath): Use
constructed encoding.
Signed-off-by: Eric Blake <eblake@redhat.com>
Each bus is represented as an array of 32 8-bit integers
where each bit represents a PCI function and each byte represents
a PCI slot.
Uses just one bus so far.
Create a new function qemuPCIAddressValidate and call it everywhere
the user might supply an incorrect address:
* qemuCollectPCIAddress for domain definition
* qemuDomainPCIAddressEnsureAddr and ReleaseSlot for hotplug
Slot and function shouldn't be wrong at this point, since values
out of range should be rejected by the XML parser.
Change QEMU_PCI_ADDRESS_LAST_SLOT to the number of slots in the bus,
not the maximum slot value, to match QEMU_PCI_ADDRESS_LAST_FUNCTION
and rename them both to have _LAST at the end.
The error message reported when attempting to change/get persistent
configuration of a transient domain suggests that changes are being
made. Reword it to suit getter APIs too.
Before:
$ virsh vcpucount transient-domain --config
error: Requested operation is not valid: cannot change persistent config of a transient domain
After:
$ virsh vcpucount transient-domain --config
error: Requested operation is not valid: transient domains do not have any persistent config
Until now tranisent networks weren't really useful as libvirtd wasn't
able to remember them across restarts. This patch adds support for
loading status files of transient networks (that already were generated)
so that the status isn't lost.
This patch chops up virNetworkObjUpdateParseFile and turns it into
virNetworkLoadState and a few friends that will help us to load status
XMLs and refactors the functions that are loading the configs to use
them.
The cpu_map.xml file is there to separate CPU model definitions from the
code. Having the only interesting data for PowerPC models only in the
source code. This patch moves this data to the XML file and removes the
hardcoded list completely.
PowerPC CPUs are either identical or incompatible and thus we just need
to look up the right model for given PVR without pretending we have
several candidates which we may choose from.
The function is also renamed as ppcDecode to match other functions in
PowerPC CPU driver.
Baseline API is supposed to return guest CPU definition that can be used
on any of the provided host CPUs. Since PowerPC CPUs are either
identical or incompatible, the API just needs to check that all provided
CPUs are identical. Previous implementation was completely bogus.
The function is also renamed as ppcBaseline to match other functions in
PowerPC CPU driver.
When ppcVendorLoad fails to parse the vendor element for whatever
reason, it is supposed to ignore it and return 0 rather than -1. The
patch also removes PowerPC vendor string from the XML as it is not
actually used for anything.
Make getting node CPU data for PowerPC unsupported on other
architectures. The function is also renamed as ppcNodeData to match
other functions in PowerPC CPU driver.
Currently, -device xxx still doesn't work well for ppc64 platform.
It's better use legacy USB option with default for ppc64.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When running unprivileged, virSetUIDGIDWithCaps will fail because it
tries to add the requested capabilities to the permitted and effective
sets.
Detect this case, and invoke the child with cleared permitted and
effective sets. If it is a setuid program, it will get them.
Some care is needed also because you cannot drop capabilities from the
bounding set without CAP_SETPCAP. Because of that, ignore errors from
setting the bounding set.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The need_prctl variable is not really needed. If it is false,
capng_apply will be called twice with the same set, causing
a little extra work but no problem. This keeps the code a bit
simpler.
It is also clearer to invoke capng_apply(CAPNG_SELECT_BOUNDS)
separately, to make sure it is done while we have CAP_SETPCAP.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reusing the result of virArchFromHost instead of calling it multiple times
Signed-off-by: Tal Kain <tal.kain@ravellosystems.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Directories python/tools/examples should include them in <> form,
though this patch allows "" form in these directories by excluding
them, a later patch will do the cleanup.
The recent qemu requires "0x" prefix for the disk wwn, this patch
changes virValidateWWN to allow the prefix, and prepend "0x" if
it's not specified. E.g.
qemu-kvm: -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,\
drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,wwn=6000c60016ea71ad:
Property 'scsi-hd.wwn' doesn't take value '6000c60016ea71ad'
Though it's a qemu regression, but it's nice to allow the prefix,
and doesn't hurt for us to always output "0x".
Detected by a simple Shell script:
for i in $(git ls-files -- '*.[ch]'); do
awk 'BEGIN {
fail=0
}
/# *include.*\.h/{
match($0, /["<][^">]*[">]/)
arr[substr($0, RSTART+1, RLENGTH-2)]++
}
END {
for (key in arr) {
if (arr[key] > 1) {
fail=1
printf("%d %s\n", arr[key], key)
}
}
if (fail == 1)
exit 1
}' $i
if test $? != 0; then
echo "Duplicate header(s) in $i"
fi
done;
A later patch will add the syntax-check to avoid duplicate
headers.
Fix the error
util/vircgroup.c: In function 'virCgroupNewDomainPartition':
util/vircgroup.c:1299:11: error: declaration of 'dirname' shadows a global declaration [-Werror=shadow]
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Check for an unsupported QMP command when using the query-tpm-models
and query-tpm-types commands before checking for general errors
in order to avoid error messages in the log.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Check for QMP query-tpm-models and set a capability flag. Do not use
this QMP command if it is not supported.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
The LXC driver currently has code to detect cgroups mounts
and then re-mount them inside the new root filesystem. Replace
this fragile code with a call to virCgroupIsolateMount.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a virCgroupIsolateMount method which looks at where the
current process is place in the cgroups (eg /system/demo.lxc.libvirt)
and then remounts the cgroups such that this sub-directory
becomes the root directory from the current process' POV.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If a cgroup controller is co-mounted with another, eg
/sys/fs/cgroup/cpu,cpuacct
Then it is a requirement that there exist symlinks at
/sys/fs/cgroup/cpu
/sys/fs/cgroup/cpuacct
pointing to the real mount point. Add support to virCgroupPtr
to detect and track these symlinks
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCgroupNewDriver method had a 'bool privileged' param.
If a false value was ever passed in, it would simply not
work, since non-root users don't have any privileges to create
new cgroups. Just delete this broken code entirely and make
the QEMU driver skip cgroup setup in non-privileged mode
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Historically QEMU/LXC guests have been placed in a cgroup layout
that is
$LOCATION-OF-LIBVIRTD/libvirt/{qemu,lxc}/$VMNAME
This is bad for a number of reasons
- The cgroup hierarchy gets very deep which seriously
impacts kernel performance due to cgroups scalability
limitations.
- It is hard to setup cgroup policies which apply across
services and virtual machines, since all VMs are underneath
the libvirtd service.
To address this the default cgroup location is changed to
be
/system/$VMNAME.{lxc,qemu}.libvirt
This puts virtual machines at the same level in the hierarchy
as system services, allowing consistent policy to be setup
across all of them.
This also honours the new resource partition location from the
XML configuration, for example
<resource>
<partition>/virtualmachines/production</partitions>
</resource>
will result in the VM being placed at
/virtualmachines/production/$VMNAME.{lxc,qemu}.libvirt
NB, with the exception of the default, /system, path which
is intended to always exist, libvirt will not attempt to
auto-create the partitions in the XML. It is the responsibility
of the admin/app to configure the partitions. Later libvirt
APIs will provide a way todo this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Allow VMs to be placed into resource groups using the
following syntax
<resource>
<partition>/virtualmachines/production</partition>
</resource>
A resource cgroup will be backed by some hypervisor specific
functionality, such as cgroups with KVM/LXC.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A resource partition is an absolute cgroup path, ignoring the
current process placement. Expose a virCgroupNewPartition API
for constructing such cgroups
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently if virCgroupMakeGroup fails, we can get in a situation
where some controllers have been setup, but others not. Ensure
we call virCgroupRemove to remove what we've done upon failure
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the virCgroupPtr struct contains 3 pieces of
information
- path - path of the cgroup, relative to current process'
cgroup placement
- placement - current process' placement in each controller
- mounts - mount point of each controller
When reading/writing cgroup settings, the path & placement
strings are combined to form the file path. This approach
only works if we assume all cgroups will be relative to
the current process' cgroup placement.
To allow support for managing cgroups at any place in the
heirarchy a change is needed. The 'placement' data should
reflect the absolute path to the cgroup, and the 'path'
value should no longer be used to form the paths to the
cgroup attribute files.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rename all the virCgroupForXXX methods to use the form
virCgroupNewXXX since they are all constructors. Also
make sure the output parameter is the last one in the
list, and annotate all pointers as non-null. Fix up
all callers, and make sure they use true/false not 0/1
for the boolean parameters
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The definition of structs for cgroups are kept in vircgroup.c since
they are intended to be private from users of the API. To enable
effective testing, however, they need to be accessible. To address
the latter issue, without compronmising the former, this introduces
a new vircgrouppriv.h file to hold the struct definitions.
To prevent other files including this private header, it requires
that __VIR_CGROUP_ALLOW_INCLUDE_PRIV_H__ be defined before inclusion
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of calling virCgroupForDomain every time we need
the virCgrouPtr instance, just do it once at Vm startup
and cache a reference to the object in virLXCDomainObjPrivatePtr
until shutdown of the VM. Removing the virCgroupPtr from
the LXC driver state also means we don't have stale mount
info, if someone mounts the cgroups filesystem after libvirtd
has been started
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of calling virCgroupForDomain every time we need
the virCgrouPtr instance, just do it once at Vm startup
and cache a reference to the object in qemuDomainObjPrivatePtr
until shutdown of the VM. Removing the virCgroupPtr from
the QEMU driver state also means we don't have stale mount
info, if someone mounts the cgroups filesystem after libvirtd
has been started
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCgroupForDriver method recently gained an 'int controllers'
parameter, but the stub impl did not
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Though they are the same thing, mixed use of them is uncomfortable.
"unsigned" is used a lot in old codes, this just tries to change the
ones in utils.
If libvirt makes any gcry_control() calls, then this
prevents gnutls for doing any initialization. As such
we must take care to do full initialization of libcrypt
on a par with what gnutls would have done. In particular
we must disable "sec mem" for cases where the user does
not have mlock() permission. We also skip our init of
libgcrypt if something else (ie the app using libvirt)
has beaten us to it.
https://bugzilla.redhat.com/show_bug.cgi?id=951630
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Report the errors as:
Domain not found: no domain with matching uuid '41414141-4141-4141-4141-414141414141' (crashtest)
instead of:
Domain not found: no domain with matching uuid '41414141-4141-4141-4141-414141414141'
Use the helper to lookup the domain object in the remaining places.
This patch also fixes error reporting when the domain was not found in several
functions that were printing the raw UUID buffer instead of the formatted
string. The offending functions were:
qemuDomainGetInterfaceParameters
qemuDomainSetInterfaceParameters
qemuGetSchedulerParametersFlags
qemuSetSchedulerParametersFlags
qemuDomainGetNumaParameters
qemuDomainSetNumaParameters
qemuDomainGetMemoryParameters
qemuDomainSetMemoryParameters
qemuDomainGetBlkioParameters
qemuDomainSetBlkioParameters
qemuDomainGetCPUStats
Some refactoring for virDomainChrSourceDef type of devices so
we can use common code.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
When a VM with a TPM passthrough device is started, the audit daemon
logs the following type of message:
type=VIRT_RESOURCE msg=audit(1365170222.460:3378): pid=16382 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:virtd_t:s0-s0:c0.c1023 msg='virt=kvm resrc=dev reason=start vm="TPM-PT" uuid=a4d7cd22-da89-3094-6212-079a48a309a1 device="/dev/tpm0" exe="/usr/sbin/libvirtd" hostname=? addr=? terminal=? res=success'
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Parse the domain XML with TPM passthrough support.
The TPM passthrough XML may look like this:
<tpm model='tpm-tis'>
<backend type='passthrough'>
<device path='/dev/tpm0'/>
</backend>
</tpm>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Probe for QEMU's QMP TPM support by querying the lists of
supported TPM models (query-tpm-models) and backend types
(query-tpm-types).
The setting of the capability flags following the strings
returned from the commands above is only provided in the
patch where domain_conf.c gets TPM support due to dependencies
on functions only introduced there.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Tested-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
This patch adds the ability to configure non-contiguous boot orders on boot
devices. This allows unplugging devices that have boot order specified without
breaking migration.
The new code now uses a slightly less memory efficient approach to store the
boot order fields in a hashtable instead of a bitmap.
To avoid the collision for creating USB controllers in machine->init()
and -device xx command line, it needs to set usb=off to avoid one USB
controller created in machine->init(). So that libvirt can use -device
or -usb to create USB controller sucessfully.
So QEMU_CAPS_MACHINE_USB_OPT capability is added, and it is for QEMU
v1.3.0 onwards which supports USB option.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
When migrating a domain with disk images stored locally (and using
storage migration), we should not complain about unsafe migration no
matter what cache policy is used for that disk.
https://bugzilla.redhat.com/show_bug.cgi?id=920441
Currently, we are discarding listen attribute from qemu cookie even though
we strive to gather it. This result in not so cool bug: if user have
different networks, one for management/migration, and one for VNC/SPICE we
pass incorrect host to the qemu in client_migrate_info. What we actually
pass is remote hostname, while we should be passing remote listen address.
It doesn't matter as long as these two are the same, but they don't need
necessary to be like that.
