The iohelper binary is not required on Win32, although it compiles
without trouble. Simply remove it from the RPM.
* mingw32-libvirt.spec.in: Remove iohelper
The Open Nebula driver has been unmaintained since it was first
introduced. The only commits have been for tree-wide cleanups.
It also has a major design flaw, in that it only knows about guests
that it has created itself, which makes it of very limited use.
Discussions wrt evolution of the VMWare ESX driver, concluded that
it should limit itself to single-node ESX operation and not try to
manage the multi-node architecture of VirtualCenter. Open Nebula
is a cluster like Virtual Center, not a single node system, so
the same reasoning applies.
The DeltaCloud project includes an Open Nebula driver and is a much
better fit architecturally, since it is explicitly targetting the
distributed multihost cluster scenario.
Thus this patch deletes the libvirt Open Nebula driver with the
recommendation that people use DeltaCloud for managing it instead.
* configure.ac: Remove probe for xmlrpc & --with-one arg
* daemon/Makefile.am, daemon/libvirtd.c, src/Makefile.am: Remove
ONE driver build
* src/opennebula/one_client.c, src/opennebula/one_client.h,
src/opennebula/one_conf.c, src/opennebula/one_conf.h,
src/opennebula/one_driver.c, src/opennebula/one_driver.c: Delete
files
* autobuild.sh, libvirt.spec.in, mingw32-libvirt.spec.in: Remove
build rules for Open Nebula
* docs/drivers.html.in, docs/sitemap.html.in: Remove reference
to OpenNebula
* docs/drvone.html.in: Delete file
Adds initial support for dtrace static probes in libvirtd
daemon, assuming use of systemtap dtrace compat shim on
Linux. The probes are inserted for network client connect,
disconnect, TLS handshake states and authentication protocol
states.
This can be tested by running the xample program and then
attempting to connect with any libvirt client (virsh,
virt-manager, etc).
# stap examples/systemtap/client.stp
Client fd=44 connected readonly=0
Client fd=44 auth polkit deny pid:24997,uid:500
Client fd=44 disconnected
Client fd=46 connected readonly=1
Client fd=46 auth sasl allow test
Client fd=46 disconnected
The libvirtd.stp file should also really not be required,
since it is duplicated info that is already available in
the main probes.d definition file. A script to autogenerate
the .stp file is needed, either in libvirtd tree, or better
as part of systemtap itself.
* Makefile.am: Add examples/systemtap subdir
* autobuild.sh: Disable dtrace for mingw32
* configure.ac: Add check for dtrace
* daemon/.gitignore: Ignore generated dtrace probe file
* daemon/Makefile.am: Build dtrace probe header & object
files
* daemon/libvirtd.stp: SystemTAP convenience probeset
* daemon/libvirtd.c: Add connect/disconnect & TLS probes
* daemon/remote.c: Add SASL and PolicyKit auth probes
* daemon/probes.d: Master probe definition
* daemon/libvirtd.h: Add convenience macro for probes
so that compilation is a no-op when dtrace is not available
* examples/systemtap/Makefile.am, examples/systemtap/client.stp
Example systemtap script using dtrace probe markers
* libvirt.spec.in: Enable dtrace on F13/RHEL6
* mingw32-libvirt.spec.in: Force disable dtrace
Integrate with libaudit.so for auditing of important operations.
libvirtd gains a couple of config entries for auditing. By
default it will enable auditing, if its enabled on the host.
It can be configured to force exit if auditing is disabled
on the host. It will can also send audit messages via libvirt
internal logging API
Places requiring audit reporting can use the VIR_AUDIT
macro to report data. This is a no-op unless auditing is
enabled
* autobuild.sh, mingw32-libvirt.spec.in: Disable audit
on mingw
* configure.ac: Add check for libaudit
* daemon/libvirtd.aug, daemon/libvirtd.conf,
daemon/test_libvirtd.aug, daemon/libvirtd.c: Add config
options to enable auditing
* include/libvirt/virterror.h, src/util/virterror.c: Add
VIR_FROM_AUDIT source
* libvirt.spec.in: Enable audit
* src/util/virtaudit.h, src/util/virtaudit.c: Simple internal
API for auditing messages
On Fedora 13 with sufficient mingw32-* packages installed, running
./autobuild.sh failed to cross-compile to mingw because
mingw32-pthreads installed a broken <pthread.h>. With that
issue fixed, the build still failed due to use of O_SYNC.
Meanwhile, recent .spec.in changes got out of sync.
* bootstrap.conf (gnulib_modules): Add fcntl-h, for O_SYNC.
* .gnulib: Update to latest, to work around buggy pthreads-win32
library.
* bootstrap: Import latest from gnulib.
* mingw32-libvirt.spec.in: Distribute new file.
Right now, mingw32-portablexdr is not available in Fedora, but is
present in fedora-mingw.git. With that package, plus
redhat-rpm-config and this patch, it is once again possible to build
mingw32-libvirt from a Fedora 12 host.
* mingw32-libvirt.spec.in (__debug_install_post): Override.
(%files): Mention recent additions.
* docs/pki_check.sh: Move to tool/virt-pki-validate.in and add
in POD man page documentation
* tools/.gitignore: Ignore generated virt-pki-validate file
* tools/Makefile.am: Install & build virt-pki-validate and
virt-pki-validate.1
* docs/remote.html, docs/remote.html.in: Refer to new tool
name virt-pki-validate
* libvirt.spec.in, mingw32-libvirt.spec.in: Add virt-pki-validate
and virt-pki-validate.1 to files list
Define an <encryption> tag specifying volume encryption format and
format-depenedent parameters (e.g. passphrase, cipher name, key
length, key).
Currently the only defined parameter is a reference to a "secret"
(passphrase/key) managed using the virSecret* API.
Only the qcow/qcow2 encryption format, and a "default" format used to
let libvirt choose the format during volume creation, is currently
supported.
This patch does not add any users; the <encryption> tag is added in
the following patches to both volumes (to support encrypted volume
creation) and domains.
* docs/*.html: Re-generate
* docs/formatstorageencryption.html.in, docs/sitemap.html.in:
Add page describing storage encryption data format
* docs/schemas/Makefile.am, docs/schemas/storageencryption.rng:
Add RNG schema for storage encryption format
* po/POTFILES.in: Add src/storage_encryption_conf.c
* src/libvirt_private.syms: Export virStorageEncryption* functions
* src/storage_encryption_conf.h, src/storage_encryption_conf.c: Internal
helper APIs for dealing with storage encryption format
* libvirt.spec.in, mingw32-libvirt.spec.in: Add storageencryption.rng
RNG schema
This patch adds a "secret" as a separately managed object, using a
special-purpose API to transfer the secret values between nodes and
libvirt users.
* docs/schemas/secret.rng, docs/schemas/Makefilem.am: Add new
schema for virSecret objects
* docs/*html: Re-generated
* docs/formatsecret.html.in, docs/sitemap.html.in: Add page
describing the virSecret XML schema
* include/libvirt/libvirt.h.in: Define the new virSecret public
API
* src/libvirt_public.syms: Export symbols for new public APIs
* mingw32-libvirt.spec.in, libvirt.spec.in: Add secret.rng to
files list
* autobuild.sh, mingw32-libvirt.spec.in: Enable esx on mingw32
* src/esx/esx_driver.c: Define AI_ADDRCONFIG if not set
* src/esx/esx_util.c, src/esx/esx_vi_types.c: Always use
%lld & friends, since gnulib guarentees we have these
and not the target's own variants
GCC >= 4.4 assumes the 'printf' attribute refers to the native
runtime libraries format specifiers. Thanks to gnulib, libvirt
has GNU format specifiers everywhere. This means we need to
use 'gnu_printf' with GCC >= 4.4 to get correct compiler
checking of printf format specifiers.
* HACKING: Document new rules for ATTRIBUTE_FMT_PRINTF
* autobuild.sh, mingw32-libvirt.spec.in: Disable OpenNebula
driver on mingw32 builds
* qemud/dispatch.h, qemud/qemu.h, src/buf.h src/internal.h,
src/logging.h, src/security.h, src/sexpr.h, src/util.h,
src/virterror_internal.h, src/xend_internal.c: Change
over to ATTRIBUTE_FMT_PRINTF.
* src/virsh.c: Disable 'cd' and 'pwd' commands on Win32
since they don't compile
* src/threads-win32.c: Add missing return value check
* .cvsignore, Makefile.am, autobuild.sh, configure.in,
mingw32-libvirt.spec.in: Import the latest MinGW libvirt spec
file. Note that the file has been renamed to conform to
new Fedora packaging guidelines.
* autobuild.sh: Fix a bug in the generation of the $EXTRA_RELEASE
field when autobuilding.