Before creating a NVRAM path, the qemuDomainNVRAMPathGenerate
method checks whether the config is using the old style
firmware approach. This check is redundant in one of the two
callers. By inlining the check into the other caller, it makes
it clearer to understand that the NVRAM path filling is done
conditionally.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Rewrite the parts which already pass FDs via fdset or directly to use
the new infrastructure.
Apart from simpler code this also adds the appropriate names to the fds
in the fdsets which will allow us to properly remove the fdsets won
hot-unplug of chardevs, which we didn't do for now and resulted in
leaking the FDs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When starting a VM we must assign unique IDs for fdsets we add via
'-add-fd'. For now it was done by using the index of the filedescriptor
passed to the virCommand. That approach is not very flexible, because
you need to have already passed the 'fd' to virCommand before generating
the fdset path, and also won't nicely work with fdsets containing two or
more fds.
This patch introduces a counter into the private data of a qemu domain
so that we can allocate unique ids without relying on virCommand.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
They're used only inside qemu_domain.c. Move it before their usage,
and unexport them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QOM path will be needed by code which is querying the cpu flags via
'qom-get' and thus needs a valid QOM path to the vCPU.
Add it into the private data and transfer from the queried data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This identifies various MIPS Malta machines, be it 32-bit or 64-bit,
little-endian or big-endian.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
And its callers. The parameter is no longer used since virDomainObjSave
was replaced with qemuDomainSaveStatus wrapper.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When setting up TLS options from config in qemuDomainPrepareChardevSourceOne
we can also extract the x509 certificate path and default tlsVerify
setting so that 'qemuBuildChardevCommand' doesn't need to access the
config object any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Completely seprate the creation of the commandline string from the setup
of other objects instantiated on the commandline.
'qemuBuildChardevCommand' will aggregate the setup of individual
parameters such as -add-fd and setup of TLS and the -chardev parameter
itself while the code formatting the commandline will be moved into
qemuBuildChardevStr.
'fdset' names are then stored in qemuDomainChrSourcePrivate.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have just one case when we wish to wait for incomming connections for
a listening socket and that is for vhost-user network devices.
Passing this via a flag to qemuBuildChrChardevStr is unwieldy. Add a
field to qemuDomainChrSourcePrivate and populate it for our special
case inside of qemuDomainPrepareChardevSourceOne.
Since we wait for incomming connections only on startup of a new VM we
also need to pass in a flag whether qemuDomainPrepareChardevSourceOne
is called on a new start or on hotplug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the qemuDomainDeviceBackendChardevForeach helper to iterate all
eligible structs and convert the setup of the TLS defaults from the
config.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The opening of files for FD passing for a chardev backend was
historically done in the function which is formatting the commandline.
This has multiple problems. Firstly the function takes a lot of
parameters which need to be passed through the commandline formatters.
This made the 'qemuBuildChrChardevStr' extremely unappealing to the
extent that we have multiple other custom formatters in places which
didn't really want to use the function.
Additionally the function is also creating files in the host in certain
configurations which is wrong for a commandline formatter to do. This
meant that e.g. not all chardev test cases can be converted to use
DO_TEST_CAPS_LATEST as we attempt to use such code path and attempt to
create files outside of the test directory.
This patch moves the opening of the filedescriptors from
'qemuBuildChrChardevFileStr' into a new helper
'qemuProcessPrepareHostBackendChardevOne' which is called using
'qemuDomainDeviceBackendChardevForeach'.
To preserve test behaviour we also have another instance
'testPrepareHostBackendChardevOne' which is populating mock
filedescriptors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce qemuDomainDeviceBackendChardevForeach(One) which calls the
callback if either given device has a chardev backend or for all chardev
backends of all devices.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I think it makes more sense for the variable about jobs to be in
the job object. I also renamed it to be consistent with the rest
of the struct.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This reverts my
commit dc2fd51fd7
Check for domain liveness in qemuDomainObjExitMonitor
which fixed the symptoms of the bug later fixed by
commit 81f50cb92d
qemu: Avoid calling qemuProcessStop without a job
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This wrapper for qemuDomainObjExitMonitorInternal was
extended by my commit dc2fd51fd7
to check whether the domain is still alive, because
we were observing crashes if the QEMU process died
while some of our APIs were in the monitor and the thread
processing the EOF event freed the domain definition.
This bug was fixed by:
commit 81f50cb92d
qemu: Avoid calling qemuProcessStop without a job
but we kept checking for the return value since.
Remove the G_GNUC_WARN_UNUSED_RESULT attribute since
all of the calls that could set def->id to -1 are protected
by qemuProcessBeginStopJob and cannot happen while we have a job
in the monitor.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The post parse callback is part of the real (non-test) processing flow.
This commit adds it (for disks) to the qemublocktest flow as well.
Specifically, this will be needed for tests that use luks encryption,
so that the default encryption engine (which is added in an upcoming commit)
will be overridden by qemu.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
'effectiveBootIndex' is a copy of 'bootIndex' if '<boot order=' was
present and left unassigned if not. This allows hypervisor drivers to
reinterpret <os><boot> without being visible in the XML.
QEMU driver had a internal implementation for disks, which is now
replaced. Additionally this will simplify a refactor of network boot
assignment.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This reverts commit 801e6da29c
They are not needed anymore.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Intended as a replacement for qemuVirtioFSCreateSocketFilename,
to be used outside of qemu_virtiofs.c
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
As advertised in previous commit, this event is delivered to us
when virtio-mem module changes the allocation inside the guest.
It comes with one attribute - size - which holds the new size of
the virtio-mem (well, allocated size), in bytes.
Mind you, this is not necessarily the same number as 'requested
size'. It almost certainly will be when sizing the memory up, but
it might not be when sizing the memory down - the guest kernel
might be unable to free some blocks.
This current size is reported in the domain XML as an output
element only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we've removed support for plaintext secrets qemuDomainSecretInfo
can be simplified by removing the 'type' field and merging in all the
fields from 'qemuDomainSecretAES'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no code which could set it any more so we can remove the
generators.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The answer is now always 'true', so we can remove the function and
simplify the logic in places where it's called.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
LUN disks are supported only by VMX and QEMU drivers and the VMX
implementation is a subset of qemu's implementation, thus we can move
the qemu-specific validator to the global validation code providing that
we allow the format to be 'none' (qemu driver always sets 'raw' if it's
not set) and allow disk type 'volume' as a source (qemu always
translates the source, and VMX doesn't implement 'volume' at all).
Moving the code to the global validation allows us to stop calling it
from the qemu specific validation and also deduplicates the checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Directly use 'priv->allowReboot' as we now document what the behaiour is
to avoid another lookup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Save further readers the headache of determining what it actually does
and note that it's not used with qemu version supporting the
'set-action' command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Again, we don't need full driver, just its config.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
The function doesn't really need domain object, but domain
definition from which it takes seclabels.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
We always process the full list so there's no value in storing the count
separately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We always process the full list so there's no value in storing the count
separately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previously they were stored in two separate arrays. This way it's
obvious when referencing the same one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For validation of explicitly configured addresses we already ported the
same style of checks to qemuValidateDomainDeviceDefAddress and implicit
address assignment should do the right thing in the first place, thus
the function is redundant and can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function doesn't modify passed video definition. Make the
argument const.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In preparation for hotplug of <transient> disks we'll need to track
whether the overlay file was created individually per-disk.
Add 'transientOverlayCreated' to 'struct _qemuDomainDiskPrivate' and
remove 'inhibitDiskTransientDelete' from 'qemuDomainObjPrivate' and
adjust the code for the change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The logic assigning the bootindices from the legacy boot order
configuration was spread through the command line formatters for the
disk device and for the floppy controller.
This patch adds 'effectiveBootindex' property to the disk private data
which holds the calculated boot index and moves the logic of determining
the boot index into 'qemuProcessPrepareDomainDiskBootorder' called from
'qemuProcessPrepareDomainStorage'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Historically, we declared pointer type to our types:
typedef struct _virXXX virXXX;
typedef virXXX *virXXXPtr;
But usefulness of such declaration is questionable, at best.
Unfortunately, we can't drop every such declaration - we have to
carry some over, because they are part of public API (e.g.
virDomainPtr). But for internal types - we can do drop them and
use what every other C project uses 'virXXX *'.
This change was generated by a very ugly shell script that
generated sed script which was then called over each file in the
repository. For the shell script refer to the cover letter:
https://listman.redhat.com/archives/libvir-list/2021-March/msg00537.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Similar to the qemu.conf knob 'deprecation_behavior' add a per-VM knob
in the QEMU namespace:
<qemu:deprecation behavior='...'/>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add status XML infrastructure for storing a list of block dirty bitmaps
which are temporarily used when migrating a VM with
VIR_MIGRATE_NON_SHARED_DISK for cleanup after a libvirtd restart during
migration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The conversion removes the use of virStringListAdd/virStringListRemove
which try to add dynamic properties to a string list which is really
inefficient.
Storing the dbus VMState ids in a GSList is pretty straightforward and
the slightly increased complexity of the code will be paid back by
removing the string list helpers later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Nodename may be asociated to a disk backup job, add support to looking
up in that chain too. This is specifically useful for the
BLOCK_WRITE_THRESHOLD event which can be registered for any nodename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Nodename may be asociated to a disk backup job, add support to looking
up in that chain too. This is specifically useful for the
BLOCK_WRITE_THRESHOLD event which can be registered for any nodename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanup the @qemuCaps argument in
qemuDomainDefValidateMemoryHotplug() is unused and thus doesn't
need to be passed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In some cases such as when creating an internal inactive snapshot we
know that the domain definition in the snapshot is equivalent to the
current definition. Additionally we set up the current definition for
the snapshotting but not the one contained in the snapshot. Thus in some
cases the caller knows better which def to use.
Make qemuDomainSnapshotForEachQcow2 take the definition by the caller
and copy the logic for selecting the definition to callers where we
don't know for sure that the above claim applies.
This fixes internal inactive snapshots when <disk type='volume'> is used
as we translate the pool/vol combo only in the current def.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/97
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The NCR53C90 ESP SCSI controller is only usable when built-in to the
machine type. This method will facilitate checking that restriction
across many places.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
