In order to save some CPU cycles we will collect all the necessary data
to delete external snapshot before we even start. They will be later
used by code that deletes the snapshots and updates metadata when
needed.
With external snapshots we need data that libvirt gets from running QEMU
process so if the VM is not running we need to start paused QEMU process
for the snapshot deletion and kill at afterwards.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Deleting external snapshots will require to run it as async domain job,
the same way as we do for snapshot creation.
For internal snapshots modify the job mask in order to forbid any other
job to be started.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Deleting internal snapshot when the currently active disk image is
different than where the internal snapshot was taken doesn't work
correctly.
This applies to a running VM only as we are using QMP command and
talking to the QEMU process that is using different disk.
This works correctly when the VM is shut of as in this case we spawn
qemu-img process to delete the snapshot.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Prepare the validation function for external snapshot delete support.
There is one exception when deleting `children-only` snapshots. If the
snapshot tree is like this example:
snap1 (external)
|
+- snap2 (internal)
|
+- snap3 (internal)
|
+- snap4 (internal)
and user calls `snapshot-delete snap1 --children-only` the current
snapshot is external but all the children snapshots are internal only
and we are able to delete it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Extract the code deleting external snapshot metadata to separate
function.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Previously the reparent happened before the actual snapshot deletion.
This change moves the code closer to the rest of the code handling
snapshot metadata when deletion happens. This makes the metadate
deletion happen after the data files are deleted.
Following patch will extract it into separate function
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This simplifies the code a bit by reusing existing parts that deletes
a single snapshot.
The drawback of this change is that we will now call the re-parent bits
to keep the metadata in sync for every child even though it will get
deleted as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Extract code that deletes children of specific snapshot to separate
function.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Extract code that deletes single snapshot to separate function.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Move code around to make it clear what is called when deleting single
snapshot or children snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Never remove the TPM state on outgoing migration if the storage setup
has shared storage for the TPM state files. Also, do not do the security
cleanup on outgoing migration if shared storage is detected.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add UNDEFINE_TPM and UNDEFINE_KEEP_TPM flags to qemuDomainUndefineFlags()
API and --tpm and --keep-tpm to 'virsh undefine'. Pass the
virDomainUndefineFlagsValues via qemuDomainRemoveInactive()
from qemuDomainUndefineFlags() all the way down to
qemuTPMEmulatorCleanupHost() and delete TPM storage there considering that
the UNDEFINE_TPM flag has priority over the persistent_state attribute
from the domain XML. Pass 0 in all other API call sites to
qemuDomainRemoveInactive() for now.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Although these and functions in the following two patches are for
now just being used by the qemu driver, it makes sense to have all
begin job functions in the same file.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch moves qemuDomainObjEndJob() into
src/conf/virdomainjob as universal virDomainObjEndJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch moves qemuDomainObjBeginJob() into
src/conf/virdomainjob as universal virDomainObjBeginJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch uses the job object directly in the domain object and
removes the job object from private data of all drivers that use
it as well as other relevant code (initializing and freeing the
structure).
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assume that QEMU_CAPS_BLOCKDEV is present and remove all code executed
when it's not.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 62627524607f added the acquiring of a job, but it is not always
VIR_ASYNC_JOB_MIGRATION_OUT, so the code fails when doing save or anything else.
Correct the async job by passing it from the caller as another parameter.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The virStorageSourceGetActualType() function returns either
virStorageSource->type (which is of type virStorageType), or
virStorageSourcePoolDef->type, which really stores a value of the
same enum. Thus, the latter struct can be changed so that the
virStorageSourceGetActualType() function can return correct type
instead of generic int.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
It makes sense to have these in the same file as the definitions
of enums.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These enums are essentially the same and always sorted in the
same order in every hypervisor with jobs. They can be generalized
by using the qemu enums as the main ones as they are the most
extensive.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I think the code looks cleaner without else branches.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In case we are snapshotting at least one 'manual' disk we will pause the
VM and keep it paused.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1866400
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The idea of the manual mode is to allow a synchronized snapshot in cases
when the storage is outsourced to an unmanaged storage provider which
requires cooperation with snapshotting.
The mode will instruct the hypervisor to pause along when the other
components are snapshotted and the 'manual' disk can be snapshotted
along. This increases latency of the snapshot but allows them in
otherwise impossible situations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It does not make sense to have both of these, since one of them
is only a wrapper for the other one. I decided to preserve the
more general one, which requires only virDomainObj and rewrote it
a bit, so that it pulls the qemu driver from privateData.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The block of code pausing the VM assigns 'resume' to true but it's
already true because of the previous condition.
The code is deliberately kept in two blocks as upcoming changes will
modify both conditions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All callers except the one in the 'esx' driver pass the flag. The 'esx'
driver has a check that 'def->ndisks' is zero after parsing the
definition. This means that we can simply always parse the disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The string value associated to the enum is "no". Rename the enum
accordingly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use an if/else branch rather than a expression with a ternary operator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Preparation steps ensure that the 'snapshot' field can only be
'VIR_DOMAIN_SNAPSHOT_LOCATION_NONE' or
VIR_DOMAIN_SNAPSHOT_LOCATION_EXTERNAL' at this point, but upcoming
patches will change that. Handle only external snapshots.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We only need to set statsType in almost every case of setting
something from private data, so it seems unnecessary to pull
privateData out of current / completed job for just this one
thing every time. I think this patch keeps the code cleaner
without variables used just once.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This patch includes:
* introducing new files: src/hypervisor/domain_job.c and src/hypervisor/domain_job.h
* new struct virDomainJobData, which is almost the same as
qemuDomainJobInfo - the only differences are moving qemu specific
job stats into the qemuDomainJobDataPrivate and adding jobType
(possibly more attributes in the future if needed).
* moving qemuDomainJobStatus to the domain_job.h and renaming it
as virDomainJobStatus
* moving and renaming qemuDomainJobStatusToType
* adding callback struct virDomainJobDataPrivateDataCallbacks
taking care of allocation, copying and freeing of private data
of virDomainJobData
* adding functions for virDomainJobDataPrivateDataCallbacks for
qemu hypervisor
* adding 'public' (public between the different hypervisors) functions
taking care of init, copy, free of virDomainJobData
* renaming every occurrence of qemuDomainJobInfo *info to
virDomainJobData *data
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We can now replace the existing NVRAM file on startup when
the API requests this.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The commit splitting out the qemuSnapshotRevertInactive function
dropped the 'defined = true' line by accident and instead
returned -1, leaving the user with a cryptic error:
error: An error occurred, but the cause is unknown
https://bugzilla.redhat.com/show_bug.cgi?id=2039136https://gitlab.com/libvirt/libvirt/-/issues/266
Fixes: 85e4a13c3f19078fb6af5ffb4a80022c142cbc7e
Signed-off-by: Ján Tomko <jtomko@redhat.com>
'virDomainSnapshotRedefinePrep' does everything needed for a redefine
when the snapshot exists but not when we are defining metadata for a new
snapshot. This gives us weird semantics.
Extract the code for replacing the definition of an existing snapshot
into a new helper 'virDomainSnapshotReplaceDef' and refactor all
callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than callers second-guessing when the snapshot definition is
assigned turn it into a double pointer and clear it on success.
Fix callers to work with the new semantics.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As with qemuSnapshotRedefine, make an extra reference in a temporary
autocleaned variable and use that instead of refing the definition after
it's stolen.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Due to historical reasons we allow users to redefine an existing
snapshot without providing the domain definition which would correspond
to it. In such case we'd use the domain definition from the snapshot
that is being redefined.
To prevent callers from doing complex moving of the domain definition
object back and forth between the snapshot definitions we can add an
argument to virDomainSnapshotAlignDisks which will allow us to pass in
the alternate definition if the one from the snapshot is missing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'require_match' set to true is only needed for internal snapshots taken
by hypervisors (qemu) which don't have a way to control which disks take
part in the snapshot (savevm).
To de-clutter callers we can change the argument to mean 'this code path
requires uniform snapshot for internal snapshots'.
Change the argument and fix the callers. For now all callers pass 'true'
but any new hypervisor or even usage in qemu is not going to share the
limitation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the appropriate type for the variable and fix all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit f4aae9726df factored out the snapshot redefinition code into a
separate function, but didn't account for the fact that the code is
consuming the reference to the snapshot definition and by moving the
code away the caller (qemuSnapshotCreateXML) now frees the definition
which didn't happen before as we cleared the pointer.
Fix it by increasing the reference locally. Later patches will refactor
the code so that it's more obvious what's happening.
Fixes: f4aae9726df
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2039651
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
