Commit Graph

31 Commits

Author SHA1 Message Date
Andrea Bolognani
16d37076be virsh: Show 'connected to console' message later
Right now, we display the message before actually attempting
to connect to the VM console. That operation, however, can
fail for a number of reasons: for example, is the VM doesn't
have a serial device, the output ends up looking like

  $ virsh console cirros
  Connected to domain 'cirros'
  Escape character is ^] (Ctrl + ])
  error: internal error: cannot find character device <null>

The initial message is misleading. Change things so that it's
only printed if we actually successfully connected to the VM
console.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2024-04-02 18:26:35 +02:00
Marc Hartmayer
49e3e7f9e8 virsh: add console --resume support
This patch adds the command line flag `--resume` to the `virsh console`
command. This resumes a paused guest after connecting to the console.
This might be handy since it's a "common" pattern to start a guest
paused, connect to the console, and then resume it so as not to miss any
console messages.

Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2023-10-24 13:51:32 +02:00
Jonathon Jongsma
62ca300530 util: remove virObjectUnref() adapters
These wrapper functions were used to adapt the virObjectUnref() function
signature for different callbacks. But in commit 0d184072, the
virObjectUnref() function was changed to return a void instead of a
bool, so these adapters are no longer necessary.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2022-07-15 16:44:39 -05:00
Peng Liang
1ce16ae098 tools: Remove unused includes
Signed-off-by: Peng Liang <tcx4c70@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-06-16 06:43:58 +02:00
Peter Krempa
654486bd57 syntax-check: sc_avoid_write: Don't use blanket file exceptions
Adding an exception for the whole file usually defeats the purpose of a
syntax check and is also likely to get forgotten once the file is
removed.

In case of the suggestion of using 'safewrite' instead of write even the
comment for safewrite states that the function needs to be used only in
certain cases.

Remove the blanket exceptions for files and use an exclude string
instead. The only instance where we keep the full file exception is for
src/libvirt-stream.c as there are multiple uses in example code in
comments where I couldn't find a nicer targetted wapproach.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-02-15 09:32:23 +01:00
Michal Privoznik
f427e6c643 virsh: Add wrapper for virStreamFree
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-10-06 09:27:43 +02:00
Michal Privoznik
c8238579fb lib: Drop internal virXXXPtr typedefs
Historically, we declared pointer type to our types:

  typedef struct _virXXX virXXX;
  typedef virXXX *virXXXPtr;

But usefulness of such declaration is questionable, at best.
Unfortunately, we can't drop every such declaration - we have to
carry some over, because they are part of public API (e.g.
virDomainPtr). But for internal types - we can do drop them and
use what every other C project uses 'virXXX *'.

This change was generated by a very ugly shell script that
generated sed script which was then called over each file in the
repository. For the shell script refer to the cover letter:

https://listman.redhat.com/archives/libvir-list/2021-March/msg00537.html

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-04-13 17:00:38 +02:00
Jiri Denemark
1107c0b9c3 Do not check return value of VIR_REALLOC_N
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-03-22 12:44:18 +01:00
Pavel Hrdina
b2b1702341 src: add missing headers to various files
All these headers are indirectly included provided by virfile.h having
virstoragefile.h which will be removed in the following patch.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-01-06 13:15:17 +01:00
Pavel Hrdina
5d98c513c5 use g_ascii_toupper instead of c_toupper from gnulib
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-12-10 13:49:24 +01:00
Ján Tomko
123196aa05 tools: use G_GNUC_UNUSED
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-15 11:25:25 +02:00
Michal Privoznik
c10f09786d virsh: Allow graceful console shutdown
Currently, whenever there's a regular EOF on the console stream
or an error the virStreamAbort() is called regardless. While this
may not actually break anything, we should call virStreamFinish()
to let the daemon know we've successfully received all the data
and are shutting down the stream gracefully.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
2019-08-26 08:57:03 +02:00
Roman Bolshakov
277c8c4c9b tools: console: Relax stream EOF handling
Regular VM shutdown triggers the error for existing session of virsh
console and it returns with non-zero exit code:
  error: internal error: console stream EOF

The message and status code are misleading because there's no real
error. virStreamRecv returns 0 correctly when EOF is reached.

Existing implementations of esx, fd, and remote streams behave the same
for virStreamFinish and virStreamAbort: they close the stream. So, we
can continue to use virStreamAbort to handle EOF and errors from
virStreamRecv but additonally we can report error if virStreamAbort
fails.

Fixes: 29f2b5248c ("tools: console: pass stream/fd errors to user")
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-08-23 14:21:26 +02:00
Roman Bolshakov
9fbf56855d tools: console: Use proper constructor
"virsh console" on macOS cannot attach to a domain and it doesn't matter if
it's local or remote domain:
  $ ~ virsh console vm
  Connected to domain vm
  Escape character is ^]
  error: internal error: unable to wait on console condition

The error comes from pthread_cond_wait that fails with EINVAL. The mutex
in the parent is not initialized with pthread_mutex_init and it results
in silent failure of pthead_mutex_lock and the attach failure.

Fixes: 98361cc3b9 ("tools: console: make console virLockableObject")
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-08-05 19:39:44 +02:00
Nikolay Shirokovskiy
29f2b5248c tools: console: pass stream/fd errors to user
If the console was disconnected due to a connection problem or a problem on the
server side it is convinient to provide the cause to the user. If the error
come from the API then the error is saved in a virsh global variable. However,
since success is returned from virshRunConsole after we reach the waiting stage,
then the error is never reported. Let's track the error in the event loop.

Next after failure we do a cleanup and this cleanup can overwrite
root cause. Thus let's save root cause immediately and then set it to
virsh error after all cleanup is done.

Since we'll be sending the error to the consumer, each failure path from
the event handlers needs to be augmented to provide what error generated
the failure.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
2019-04-04 10:36:04 +03:00
Nikolay Shirokovskiy
4525de7356 tools: console: check if console was shutdown in callbacks
On error in main thread virConsoleShutdown is called which
deletes fd watches/stream callback and yet callbacks can
be called after. Thus we can incorrectly allocate
terminalToStream.data memory and get memory leak for example.
Let's check if console was shutdown in the very beginning of
callbacks.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
2019-04-04 10:36:04 +03:00
Nikolay Shirokovskiy
cb7c1cddc5 tools: console: add missing locks in callbacks
Stream/fd callbacks accessing console object are called from the
event loop thread and the console object is also accessed from
the main thread so we are better add locking to handlers.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
2019-04-04 10:36:04 +03:00
Nikolay Shirokovskiy
cbd9e3624d tools: console: cleanup console on errors in main thread
We only check now for virObjectWait failures in virshRunConsole but
we'd better check and for other failures too. And we need to shutdown
console on error in the main thread.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
2019-04-04 10:36:04 +03:00
Nikolay Shirokovskiy
98361cc3b9 tools: console: make console virLockableObject
We need to turn console into virObject object because stream/fd callbacks
can be called from the event loop thread after freeing console
in main thread. It is convinient to turn into virLockableObject as
we have mutex in console object.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
2019-04-04 10:36:04 +03:00
Daniel P. Berrangé
600462834f Remove all Author(s): lines from source file headers
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.

In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.

With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to  find the
author of a particular bit of code.

This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.

The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.

Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-13 16:08:38 +00:00
Erik Skultety
5165ff0971 src: More cleanup of some system headers already contained in internal.h
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
2018-09-20 10:16:39 +02:00
Erik Skultety
9403b63102 internal: Move <stdio.h> include to internal.h
It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
2018-09-20 10:16:38 +02:00
Erik Skultety
834c5720e4 tools: Introduce new client generic module vsh
In order to share as much virsh' logic as possible with upcomming
virt-admin client we need to split virsh logic into virsh specific and
client generic features.

Since majority of virsh methods should be generic enough to be used by
other clients, it's much easier to rename virsh specific data to virshX
than doing this vice versa. It moved generic virsh commands (including info
and opts structures) to generic module vsh.c.

Besides renaming methods and structures, this patch also involves introduction
of a client specific control structure being referenced as private data in the
original control structure, introduction of a new global vsh Initializer,
which currently doesn't do much, but there is a potential for added
functionality in the future.
Lastly it introduced client hooks which are especially necessary during
client connecting phase.
2015-08-14 15:45:44 +02:00
Martin Kletzander
91cc3d9570 Remove unnecessary curly brackets in tools/
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-11-14 17:13:36 +01:00
Eric Blake
0585332430 maint: avoid static zero init in tools
C guarantees that static variables are zero-initialized.  Some older
compilers (and also gcc -fno-zero-initialized-in-bss) create larger
binaries if you explicitly zero-initialize a static variable.

* tools/virsh-console.c (got_signal): Drop unused variable.
* tools/virsh-domain.c: Fix initialization.
* tools/virsh.c: Likewise.
* tools/virt-host-validate-common.c (virHostMsgWantEscape):
Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-10-29 09:55:09 -06:00
Ján Tomko
5d8793eebb Indent top-level labels by one space in tools/ 2014-03-25 14:58:41 +01:00
Daniel P. Berrange
2835c1e730 Add virLogSource variables to all source files
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-03-18 14:29:22 +00:00
Roman Bogorodskiy
356bf55e98 Fix locking in virsh console
vshRunConsole() uses virCondWait() which is a wrapper around
pthread_cond_wait(). On FreeBSD, pthread_cond_wait needs mutex to be
locked, otherwise it immediately fails with EPERM. On Linux, the
behaviour in this case is undefined.

So lock the mutex before calling virCondWait().
2014-03-10 14:51:32 +04:00
Peter Krempa
3e29c77a26 virsh-console: Avoid using signal() in multithreaded application
Man page for signal states:

 "The effects of signal() in a multithreaded process are unspecified."

Switch signal() to sigaction in virsh console code.
2013-09-03 14:06:11 +02:00
Peter Krempa
02eaf1821c virsh: Rename vshMakeStdinRaw to vshTTYMakeRaw and move it to virsh.c
Move the function to virsh.c to the rest of the TTY managing functions
and change the code so that it mirrors the rest.
2013-09-03 14:06:11 +02:00
Peter Krempa
40f1d18fea tools: rename console.[ch] to virsh-console.[ch] and fix coding style 2013-09-03 14:06:11 +02:00