Commit Graph

20 Commits

Author SHA1 Message Date
Laine Stump
75db9997a0 util: set vlan tag for macvtap passthrough mode on SRIOV VFs
SRIOV VFs used in macvtap passthrough mode can take advantage of the
SRIOV card's transparent vlan tagging. All the code was there to set
the vlan tag, and it has been used for SRIOV VFs used for hostdev
interfaces for several years, but for some reason, the vlan tag for
macvtap passthrough devices was stubbed out with a -1.

This patch moves a bit of common validation down to a lower level
(virNetDevReplaceNetConfig()) so it is shared by hostdev and macvtap
modes, and updates the macvtap caller to actually send the vlan config
instead of -1.
2016-05-10 14:04:19 -04:00
Laine Stump
370608b4c7 util: keep/use a bitmap of in-use macvtap devices
This patch creates two bitmaps, one for macvlan device names and one
for macvtap. The bitmap position is used to indicate that libvirt is
currently using a device with the name macvtap%d/macvlan%d, where %d
is the position in the bitmap. When requested to create a new
macvtap/macvlan device, libvirt will now look for the first clear bit
in the appropriate bitmap and derive the device name from that rather
than just starting at 0 and counting up until one works.

When libvirtd is restarted, the qemu driver code that reattaches to
active domains calls the appropriate function to "re-reserve" the
device names as it is scanning the status of running domains.

Note that it may seem strange that the retry counter now starts at
8191 instead of 5. This is because we now don't do a "pre-check" for
the existence of a device once we've reserved it in the bitmap - we
move straight to creating it; although very unlikely, it's possible
that someone has a running system where they have a large number of
network devices *created outside libvirt* named "macvtap%d" or
"macvlan%d" - such a setup would still allow creating more devices
with the old code, while a low retry max in the new code would cause a
failure. Since the objective of the retry max is just to prevent an
infinite loop, and it's highly unlikely to do more than 1 iteration
anyway, having a high max is a reasonable concession in order to
prevent lots of new failures.
2016-01-26 12:20:04 -05:00
John Ferlan
afe73ed468 util: Fixup virnetdevmacvlan.h ATTRIBUTE_NONNULL's
Commit id '56e2171c6' removed a variable from the argument list, but
neglected to update the ATTRIBUTE_NONNULL values, so when commit id
'08da97bfb' added a couple of arguments, the values were off.
2015-12-11 07:16:16 -05:00
Michal Privoznik
08da97bfb9 virNetDevMacVLanCreateWithVPortProfile: Rework to support multiple FDs
For the multiqueue on macvtaps we are going to need to open
the device multiple times. Currently, this is not supported.
Rework the function, so that upper layers can be reworked too.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-12-11 08:44:43 +01:00
Michal Privoznik
56e2171c6f virNetDevMacVLanCreateWithVPortProfile: Turn vnet_hdr into flag
So yet again one of integer arguments that we use as a boolean.
Since the argument count of the function is unbearably long
enough, lets turn those booleans into flags.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-12-11 08:42:49 +01:00
Matthew Rosato
82977058f5 network: Bring netdevs online later
Currently, MAC registration occurs during device creation, which is
early enough that, during live migration, you end up with duplicate
MAC addresses on still-running source and target devices, even though
the target device isn't actually being used yet.
This patch proposes to defer MAC registration until right before
the guest can actually use the device -- In other words, right
before starting guest CPUs.

Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Laine Stump <laine@laine.org>
2014-12-10 15:09:01 -05:00
Anirban Chakraborty
22cff52a2b network: Add network bandwidth support to ethernet interfaces
Ethernet interfaces in libvirt currently do not support bandwidth setting.
For example, following xml file for an interface will not apply these
settings to corresponding qdiscs.

    <interface type="ethernet">
      <mac address="02:36:1d:18:2a:e4"/>
      <model type="virtio"/>
      <script path=""/>
      <target dev="tap361d182a-e4"/>
      <bandwidth>
        <inbound average="984" peak="1024" burst="64"/>
        <outbound average="2000" peak="2048" burst="128"/>
      </bandwidth>
    </interface>

Signed-off-by: Anirban Chakraborty <abchak@juniper.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-11-19 10:36:49 +01:00
Matthew Rosato
7199d2c523 util: Introduce flags field for macvtap creation
Currently, there is one flag passed in during macvtap creation
(withTap) -- Let's convert this field to an unsigned int flag
field for future expansion.

Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-09-02 13:34:32 +02:00
Julio Faracco
1b14c449b8 util: use typedefs for enums in "src/util/" directory
In "src/util/" there are many enumeration (enum) declarations.
Sometimes, it's better using a typedef for variable types,
function types and other usages. Other enumeration will be
changed to typedef's in the future.

Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2014-05-05 14:30:01 -06:00
Eric Blake
955af4d4c1 maint: avoid 'const fooPtr' in virnet files
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can).  But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).

Fix up remaining offenders in src/util.

* src/util/virnetdev.h (virNetDevSetMAC)
(virNetDevReplaceMacAddress, virNetDevValidateConfig)
(virNetDevReplaceNetConfig): Use intended type.
* src/util/virnetdevbandwidth.h (virNetDevBandwidthCopy)
(virNetDevBandwidthPlug): Likewise.
* src/util/virnetdevmacvlan.h (virNetDevMacVLanCreate)
(virNetDevMacVLanCreateWithVPortProfile)
(virNetDevMacVLanDeleteWithVPortProfile)
(virNetDevMacVLanRestartWithVPortProfile)
(virNetDevMacVLanVPortProfileRegisterCallback): Likewise.
* src/util/virnetdevopenvswitch.h (virNetDevOpenvswitchAddPort):
Likewise.
* src/util/virnetdevtap.h (virNetDevTapCreateInBridgePort):
Likewise.
* src/util/virnetdevvlan.h (virNetDevVlanEqual)
(virNetDevVlanCopy): Likewise.
* src/util/virnetdevvportprofile.h
(virNetDevVPortProfileAssociate)
(virNetDevVPortProfileDisassociate): Likewise.
* src/util/virnetlink.h (virNetlinkEventRemoveCallback)
(virNetlinkEventAddClient, virNetlinkEventRemoveClient):
Likewise.
* src/util/virnetdev.c (virNetDevSetMAC)
(virNetDevReplaceMacAddress, virNetDevValidateConfig)
(virNetDevReplaceNetConfig): Fix fallout.
* src/util/virnetdevbandwidth.c (virNetDevBandwidthCopy)
(virNetDevBandwidthPlug): Likewise.
* src/util/virnetdevmacvlan.c (virNetDevMacVLanCreate)
(virNetDevMacVLanCreateWithVPortProfile)
(virNetDevMacVLanDeleteWithVPortProfile)
(virNetDevMacVLanRestartWithVPortProfile)
(virNetDevMacVLanVPortProfileRegisterCallback): Likewise.
* src/util/virnetdevopenvswitch.c (virNetDevOpenvswitchAddPort):
Likewise.
* src/util/virnetdevtap.c (virNetDevTapCreateInBridgePort):
Likewise.
* src/util/virnetdevvlan.c (virNetDevVlanEqual)
(virNetDevVlanCopy): Likewise.
* src/util/virnetdevvportprofile.c
(virNetDevVPortProfileAssociate)
(virNetDevVPortProfileDisassociate)
(virNetDevVPortProfileOpSetLink, virNetDevVPortProfileOpCommon)
(virNetDevVPortProfileOp8021Qbg, virNetDevVPortProfileOp8021Qbh):
Likewise.
* src/util/virnetlink.c (virNetlinkEventRemoveCallback)
(virNetlinkEventAddClient, virNetlinkEventRemoveClient):
Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-10-14 13:05:34 -06:00
Eric Blake
4ecb723b9e maint: fix up copyright notice inconsistencies
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/
2012-09-20 16:30:55 -06:00
Osier Yang
f9ce7dad60 Desert the FSF address in copyright
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c
2012-07-23 10:50:50 +08:00
Stefan Berger
387117ad92 Convert 'raw MAC address' usages to use virMacAddr
Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer

then replace raw MAC addresses by replacing

- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr

and introduce usage of above functions where necessary.
2012-07-17 08:07:59 -04:00
Laine Stump
f78024b9f5 util: fix crash when starting macvtap interfaces
This patch resolves https://bugzilla.redhat.com/show_bug.cgi?id=815270

The function virNetDevMacVLanVPortProfileRegisterCallback() takes an
arg "virtPortProfile", and was checking it for non-NULL before using
it. However, the prototype for
virNetDevMacVLanPortProfileRegisterCallback had marked that arg with
ATTRIBUTE_NONNULL(). Contrary to what one may think,
ATTRIBUTE_NONNULL() does not provide any guarantee that an arg marked
as such really is always non-null; the only effect to the code
generated by gcc, is that gcc *assumes* it is non-NULL; this results
in, for example, the check for a non-NULL value being optimized out.

(Unfortunately, this code removal only occurs when optimization is
enabled, and I am in the habit of doing local builds with optimization
off to ease debugging, so the bug didn't show up in my earlier local
testing).

In general, virPortProfile might always be NULL, so it shouldn't be
marked as ATTRIBUTE_NONNULL. One other function prototype made this
same error, so this patch fixes it as well.
2012-04-25 20:55:26 -04:00
D. Herrendoerfer
997366ca7d qemu,util: fix netlink callback registration for migration
This patch adds a netlink callback when migrating a VEPA enabled
virtual machine.  It fixes a Bug where a VM would not request a port
association when it was cleared by lldpad.

This patch requires the latest git version of lldpad to work.

Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
2012-04-12 14:32:10 -04:00
D. Herrendoerfer
bd6b0a052e qemu,util: on restart of libvirt restart vepa callbacks
When libvirtd is restarted, also restart the netlink event
message callbacks for existing VEPA connections and send
a message to lldpad for these existing links, so it learns
the new libvirtd pid.

Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
2012-03-27 10:48:39 -04:00
Daniel P. Berrange
6ec8288a96 Allow creation of plain macvlan devices
Update virNetDevMacVLanCreateWithVPortProfile to allow creation
of plain macvlan devices, as well as macvtap devices. The former
is useful for LXC containers

* src/qemu/qemu_command.c: Explicitly request a macvtap device
* src/util/virnetdevmacvlan.c, src/util/virnetdevmacvlan.h: Add
  new flag to allow switching between macvlan and macvtap
  creation
2011-11-18 16:10:37 +00:00
Daniel P. Berrange
d2fed854c0 Move the low level macvlan creation APIs
Move the low level macvlan creation APIs into the
virnetdevmacvlan.c file where they more naturally
belong

* util/interface.c, util/interface.h: Remove virNetDevMacVLanCreate
  and virNetDevMacVLanDelete
* util/virnetdevmacvlan.c, util/virnetdevmacvlan.h: Add
  virNetDevMacVLanCreate and virNetDevMacVLanDelete
2011-11-18 16:10:02 +00:00
Daniel P. Berrange
191090ae27 Rename high level macvlan creation APIs
Rename virNetDevMacVLanCreate to virNetDevMacVLanCreateWithVPortProfile
and virNetDevMacVLanDelete to virNetDevMacVLanDeleteWithVPortProfile

To make way for renaming the other macvlan creation APIs in
interface.c

* util/virnetdevmacvlan.c, util/virnetdevmacvlan.h,
  qemu/qemu_command.c, qemu/qemu_hotplug.c, qemu/qemu_process.c:
  Rename APIs
2011-11-18 16:10:02 +00:00
Daniel P. Berrange
896104c9f0 Rename and split the macvtap.c file
Rename the macvtap.c file to virnetdevmacvlan.c to reflect its
functionality. Move the port profile association code out into
virnetdevvportprofile.c. Make the APIs available unconditionally
to callers

* src/util/macvtap.h: rename to src/util/virnetdevmacvlan.h,
* src/util/macvtap.c: rename to src/util/virnetdevmacvlan.c
* src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h:
  Pull in vport association code
* src/Makefile.am, src/conf/domain_conf.h, src/qemu/qemu_conf.c,
  src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update include
  paths & remove conditional compilation
2011-11-18 16:10:01 +00:00