Since the string "ci" is already contained in the path, it
seems unnecessary to include it into the filename too: in fact,
we only do that for Dockerfiles and not for files in ci/cirrus,
even though those are generated the very same way.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
macOS builder capacity on Cirrus CI is quite limited, and so we
can't afford to keep the old build job around after adding the
new one like we do for FreeBSD.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While pkgng on FreeBSD updates the package list automatically
when it's run, homebrew on macOS doesn't do the same thing, which
can result in stale packages being installed. Explicitly call
'brew update' before 'brew install' to avoid that scenario.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The FreeBSD 12.1 image on Cirrus CI is currently broken, but
that's okay because a FreeBSD 12.2 image is also available and
we'd rather build on the more up-to-date target anyway.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Debian sid is currently broken on ppc64le, so move the build to
Debian 10; do the opposite for the aarch64 and mips64el builds to
try and restore the 10/sid balance.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Whether a container build job is considered required depends on
whether the corresponding cross-build job exists, and in a few
cases the two got out of sync over time.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Keep them ordered by architecture, the same way the corresponding
container jobs are, to make it easier to jump between the two
sections and compare them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A couple of these were wrong, resulting in the build job not
waiting for the correct container to be built before starting.
Fixes: 77296c807b
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Fedora 34 rawhide has pulled in a new GCC 11 build which now
defaults to dwarf5 format. This format is not compatible with
the pdwtags program used in our test suite to validate the
RPC files.
We have no need for debuginfo in CI except for pdwtags,
so the simplest short term fix is to force the older dwarf
version in the hope that a fixed dwarves release will
arrive before Fedora 34 is released, or GCC 11 becomes more
widespread. Eventually we might need to figure out a way to
probe for compatibility but for now, we'll hope that any
distro with GCC 11 will be able to have a fixed dwarves too.
https://bugzilla.redhat.com/show_bug.cgi?id=1919965
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Leap 15.1 will reach EOL on January 31st 2021, so we should not test on
it during the current development cycle ending on March 1st.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Thanks to the 'rules' syntax, this will translate to
'allow_failure:true' and let the job fail but will not affect the rest
of the pipeline.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
'rules' syntax replaces the only/except syntax with which it is
mutually exclusive. In some cases the 'rules' syntax is more readable
than the 'only/except' equivalent, in some cases it is not.
The idea behind this conversion is to introduce an explicit env variable
controlling the 'allow_failure' attribute which would then be attached
to a broken build job which would in turn result in a soft failure.
Such behaviour is not possible to achieve with the older 'only/except'
syntax.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
'extends' is slightly more readable and definitely more flexible in
terms of allowing includes of templates.
The main reason for this patch though is that the next patch converts
the 'only/except' syntax to the new (preferable) 'rules' syntax.
Variable anchors are still kept intact because the use case there is
different from regular template anchors.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In this refresh the PIP variable is renamed to PIP3 and the
PYPI_PKGS variable disappears since we (currently) don't have
any need for it.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The "libvirt-" prefix was removed from hostnames in libvirt-ci.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This makes the dockerfile name match the output container name
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This introduces Fedora 33 and removes some redundant packages.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce new job to make a coverity build and upload coverity data to
scan.coverity.com where the analysis is then executed.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In most cross builds we can't run tests since we can't assume QEMU user
mode emulators are loaded. i686 is special though because x86_64 can run
i686 natively, so we should run unit tests there.
The key benefit is that this gives us 32-bit unit test coverage in CI.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We lost this coverage during the move from CentOS CI to GitLab CI,
and it's high time we brought it back.
Building RPMs is currently skipped for
* openSUSE, which is not supported by our spec file;
* clang builds, where rpmbuild fails with
meson.build:1:0: ERROR: Unable to determine dynamic linker
* targets where we install Meson from PyPi, because that doesn't
bring in the necessary RPM macros.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Instead of having an ad-hoc build script for CentOS 7, follow the
pattern established in other repositories under the libvirt group
and allow selectively disabling that specific part of the build.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The previous 11.3 image provided by Cirrus did not boot, but they have
now provided a working 11.4 image
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We've hit issues with GitLab CI jobs reporting a failure despite
the corresponding Cirrus CI job finishing successfully: this is
apparently caused by the underlying VM being rescheduled.
A workaround for this issue has been implemented as of
5299874bbb
which will be included in the upcoming 0.3.0 release; however, in
order to validate that this workaround is effective it would be
useful to have more data.
Based on the conversation in
https://github.com/sio/cirrus-run/issues/4
enabling verbose mode allows to collect this data while not having
any impact on performance, so let's enable it temporarily and then
disable it again once cirrus-run 0.3.0 is out.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This feature has been implemented as of
b9b2278f1d
and will be included in the upcoming 0.3.0 release.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Write down the container job needed for each build job in the
'needs' keyword to allow greater parallelism.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
On Debian Sid there are broken headers for cross compilation. There is
no <asm/kvm.h> header unconditionally included by <linux/kvm.h>.
With autotools the build works correctly because the header detection
tries to compile simple code that includes the header but with Meson
the detection works differently. We check <linux/kvm.h> which is present
so it should be safe to include it.
We could workaround it in libvirt by checking for presence of
<asm/kvm.h> as well but I don't believe that's a correct approach.
IMHO it should be fixed in Debian.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Having limit set to 100 is in most cases perfect but sometimes there can
be a larger series that will have more than 100 patches and it will make
the check-dco job fail.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
The jobs building containers do not depend on anything.
Make this explicit by including the 'needs' keyword in case
we need to shuffle around the stages in the future.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Jobs using cirrus-run don't need to wait for any jobs from
the container stage. Run them as soon as possible.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Run the build with clang on Fedora Rawhide, Debian 10 and CentOS 8.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Be less hostile to developers and run the build jobs even
if the dco-check failed. That way they can test their own
"private" branches without a sign-off.
Also specify empty `needs` for it, since it does not depend
on any of the jobs in the container phase and can be run
right away.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Turns out 'ldebian' was not a typo, but rather the result of
mistakenly shifting the dash in 'armv7l-debian' one spot to the
left.
Fixes: 821100e812
Reported-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The existing cross-compilation jobs are carefully redistributed
among Debian 10 and Debian sid to ensure we don't use the latter
for aarch64, mipsel or mips64el, since those architectures are
currently broken.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of having static job definitions for FreeBSD and macOS,
use a generic template for both and fill in the details that are
actually different, such as the list of packages to install, in
the GitLab CI job, right before calling cirrus-run.
The target-specific information are provided by lcitool, so that
keeping them up to date is just a matter of running the refresh
script when necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
After recent changes (increasing the parallelism of the pipeline
by reducing the number of stages, introducing FreeBSD builds that
take longer than any other job), the difference between running
the full pipeline or a reduced one has basically disappeared: in
both cases, the completion time is around 25-35 minutes depending
on whether containers need to be rebuilt and how many shared
runners are available.
Reduce the complexity of our .gitlab-ci.yml and make things
simpler for contributors by simply always running all jobs.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
CentOS does not have the cppi package, so some code style checks are
skipped. Switch to a openSUSE image to do the code style checks.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The build job for this container has been failing every single
time, and as it turns out the explanation for that is very simple:
Debian is just not going to support the mips architecture going
forward.
Reported-by: Pino Toscano <ptoscano@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Debian sid is currently broken on mipsel, so use Debian 10 for
that architecture; at the same time, move the ppc64le build from
Debian 10 to Debian sid to keep things balanced.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Instead of using pre-built containers hosted on Quay, build
containers as part of the GitLab CI pipeline and upload them to the
GitLab container registry for later use.
This will not significantly slow down builds, because containers are
only rebuilt when the corresponding Dockerfile has been modified.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This removes a lot of repetition and makes the configuration much
easier to read.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Right now we're dividing the jobs into three stages: prebuild, which
includes DCO checking as well as building artifacts such as the
website, and native_build/cross_build, which do exactly what you'd
expect based on their names.
This organization is nice from the logical point of view, but results
in poor utilization of the available CI resources: in particular, the
fact that cross_build jobs can only start after all native_build jobs
have finished means that if even a single one of the latter takes a
bit longer the pipeline will stall, and with native builds taking
anywhere from less than 10 minutes to more than 20, this happens all
the time.
Building artifacts in a separate pipeline stage also doesn't have any
advantages, and only delays further stages by a couple of minutes.
The only job that really makes sense in its own stage is the DCO
check, because it's extremely fast (less than 1 minute) and, if that
fails, we can avoid kicking off all other jobs.
Reducing the number of stages results in significant speedups:
specifically, going from three stages to two stages reduces the
overall completion time for a full CI pipeline from ~45 minutes[1]
to ~30 minutes[2].
[1] https://gitlab.com/abologna/libvirt/-/pipelines/154751893
[2] https://gitlab.com/abologna/libvirt/-/pipelines/154771173
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We use cirrus-run to trigger Cirrus CI jobs from GitLab CI jobs,
making it possible to extend our platform coverage to include
FreeBSD without having to maintain our own runners; additionally,
we'll be able to ditch Travis CI and, since results for Cirrus CI
jobs are reflected back to the GitLab CI jobs that triggered them,
we will be able to get all information from a single dashboard.
The FreeBSD and macOS job definitions can be improved further: for
example, we will want to enable caching to speed up builds, and
ultimately we should figure out a way to generate at least part of
them, notably the list of packages to be installed, using lcitool.
All of that will happen in later patches: for now, this is good
enough to start using Cirrus CI.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since we're storing the libvirt.pot file in git now, we should pull from
the source dir, not the build dir.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
So that we don't have to chase frequent Fedora releases, move the
non-build related jobs onto the long life CentOS 8 distro.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Replace Fedora 30 with Fedora 32
Replace Ubuntu 16.04 with Ubuntu 20.04
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This removes the locally maintained DCO checking script in favour of the
shared container image provided by libvirt-ci.git.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Setting CC="ccache cc" works in most cases, but sometimes it will
break the build: in particular, we have experienced issues in the
past with that approach when using cgo to build our Go bindings.
A more robust approach is to have a directory containing symlinks
from the compiler name to the ccache binary: in that case, ccache
itself will invoke the compiler, and the build system will be none
the wiser.
Since libvirt-ci commit 2563aebb6c5c, container images contain a
suitable symlink directory, so all that's needed to enable the new
approach is to add this directory to $PATH.
Since we're touching this anyway, we make a few more changes:
$CCACHE_DIR is no longer created manually, because ccache will
take care of creating it for us if it doesn't already exist; the
ccache setup is moved out of the job template and into
script_variables, removing unnecessary duplication; a limit is
set on the size of the cache (500 MB, which is twice the amount
used by a fresh build on my Fedora 31 machine).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since libvirt-ci commit 27cfddee8835, paths to build tools such as
ninja and make are exported in the container's environment and can
be used directly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This new template provides a standardized place where environment
variables which are not static, but rather depend on the output of
some shell command, can be defined for later use. This pattern is
already used in libosinfo's GitLab CI integration.
Defining $MAKEFLAGS there means we don't need to call getconf over
and over, and the actual build steps don't end up drowned in the
noise.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Running the code style syntax-check as part of the build jobs leads to
all jobs failing in the same way. Have a prebuild job for validating
syntax-check to catch code style problems upfront and thus avoid needing
to run all the build jobs.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>a
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This introduces a CI job for validating DCO sign-off in every commit
message. The CI jobs are not provided any information on what the
baseline commit for the branch was. We can't compare against the forked
repo's master branch, as there's no guarantee the user is keeping master
up2date in their fork. Thus we add the master upstream repo as a git
remote and identify the common ancestor.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For any given job there is a high likelihood that ccache will be able to
reuse previously built object files. This will result in faster build
pipelines in later updates.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Whenever there is a change to the translatable strings we need to push
a new libvirt.pot to weblate. This only needs to be done when code
merges into git master, so the job is restricted to that branch.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch adds x86_64 native CI jobs for all distros that we currently
build container images for. This is a superset of the Linux jobs run on
current Jenkins and Travis platforms.
The remaining missing platforms are FreeBSD and macOS, neither of which
can use the shared runner container based infrastructure.
We may add further native jobs in the future which are not x86_64 based,
if we get access to suitable hardware, thus the jobs all have an arch
prefix in their name, just like the cross-built jobs do.
As with the cross-arch builds, the native jobs are split into two
groups. One group is run in all situations, while the other group is
only run on the master branch, or branches with a name prefix
'ci-full-'. This avoids the build time getting too long when
developers are testing their code prior to submission, while keeping
full coverage of code that is merged.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This pulls in the mingw cross build jobs using Fedora 30 as a base,
matching what is done on Jenkins and Travis.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The pipeline UI will truncate the names of jobs after about 15
characters. As a result with the cross-builds, we truncate the
most important part of the job name. Putting the most important
part first is robust against truncation, and we can drop the
redundant "-cross" stub.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <skultety.erik@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we have nine different cross build jobs, but as we introduce
more native jobs this is going to result in a very long CI execution
time. For developers testing their personal branches under development
it is generally sufficient to just look at a couple of interesting
scenarios, namely 32-bit and big endian.
This splits the cross build jobs so that by default only the armv7
and s390x archs are built. The remainining archs are setup so that they
are only built for code on the master branch, which will have the effect
of doing post-merge testing. Developers can opt-in to full testing of
their pre-merge code by pushing it to a branch with a name prefix of
"ci-full-".
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Run the bare minimum build that is possible to create the docs, avoiding
compiling code which other jobs will deal with.
The generated website is published as an artifact and thus is browsable
by developers on build completion and can be downloaded as a zip file.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As we introduce more build jobs, it will be useful to have a grouping of
jobs to more easily visualize the results and potentially control build
ordering.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We don't need the full git history when running CI jobs. From a code POV
we only need the most recent commit, but we want to be able to run
checks on the commits too. In particular to validate the DCO signoff for
each commit.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To facilitate future jobs that will use FreeBSD
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Support for the mips architecture has been dropped from Debian
sid. Move the mipsel job from Debian 9 to Debian sid at the same
time to keep things balanced.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
GitLab CI unfortunately doesn't use the standard Makefile.ci
machinery, so its configuration needs to be updated separately.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
The split is mostly arbitrary, but we purposefully moved
the mips64el builds off sid since currently that container
is failing to build and is thus unavailable.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Up until now, our images have been tagged as "master" instead
of the default "latest" due to the way the build process
worked, but we're using the default now.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
GitLab CI provides some shared build runners that use Docker containers.
This resource can usefully run cross-compiled builds since all other CI
build testing is currently x86 only, and Travis CI is already very busy
testing native builds.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
