This effectively removes virDomainGraphicsListenSetAddress which was
used only to change the address of listen structure and possible change
the listen type. The new function will auto-expand the listens array
and append a new listen.
The old function was used on pre-allocated array of listens and in most
cases it only "add" a new listen. The two remaining uses can access the
listen structure directly.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Rest of the fields of the iotune data structure did not check for
malformed integers. Use the previously defined macro to extract them
which will simplify the code and add error reporting.
Since the structure was pre-initialized to 0 we don't need to set every
single member to 0 if it's not present in the XML. Additionally if we
put the name of the field into the error message the code can be
simplified using a macro to parse the members.
If we encounter a video device with primary=yes, we insert it
at def->videos[0].
There is no need to record this in a separate variable,
just check if there already is a primary video at def->videos[0].
We call VIR_INSERT_ELEMENT_INPLACE either with 0 (for primary video)
or def->nvideos (for the rest).
Use a variable with more semantic name, since j is usually used
for iterating.
We start with both i and def->nvideos at 0 and increment both
after every successful iteration.
Use i directly, instead of passing the def->nvideos value through j.
Commit 119cd06 started setting the primary bool for the first
user-specified video even if user omitted the 'primary' attribute.
However this was done before the addition of the implicit device.
This broke startup of transient qemu domains with no <video>:
https://bugzilla.redhat.com/show_bug.cgi?id=1325757
Move this default to virDomainDefPostParseInternal,
after the addition of the implicit video device, to catch the implicit
video as well.
Commit dc98a5bc refactored the code a lot and forget about checking if
listen attribute is specified. This ensures that listen attribute and
first listen element are compared only if both exist.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit d77ffb6876 added not only reporting of the PCI header type, but
also parsing of that information. However, because there was no parsing
done for the other sub-PCI capabilities, if there was any other
capability then a valid header type name (like phys_function or
virt_functions) the parsing would fail. This prevented passing node
device XMLs that we generated into our own functions when dealing with,
e.g. with SRIOV cards.
Instead of reworking the whole parsing, just fix this one occurence and
remove a test for it for the time being. Future patches will deal with
the rest.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Create a bitmap of iothreads that have scheduler info set so that the
transformation algorithm does not have to iterate the empty bitmap many
times. By reusing self-expanding bitmaps the bitmap size does not need
to be pre-calculated.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1264008
This patch adds new xml element, and so we can have the option of
also having perf events enabled immediately at startup.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-6-git-send-email-qiaowei.ren@intel.com
This patch adds support for "vpindex", "runtime", "synic",
"stimer", and "vendor_id" features available in qemu 2.5+.
- When Hyper-V "vpindex" is on, guest can use MSR HV_X64_MSR_VP_INDEX
to get virtual processor ID.
- Hyper-V "runtime" enlightement feature allows to use MSR
HV_X64_MSR_VP_RUNTIME to get the time the virtual processor consumes
running guest code, as well as the time the hypervisor spends running
code on behalf of that guest.
- Hyper-V "synic" stands for Synthetic Interrupt Controller, which is
lapic extension controlled via MSRs.
- Hyper-V "stimer" switches on Hyper-V SynIC timers MSR's support.
Guest can setup and use fired by host events (SynIC interrupt and
appropriate timer expiration message) as guest clock events
- Hyper-V "reset" allows guest to reset VM.
- Hyper-V "vendor_id" exposes hypervisor vendor id to guest.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
1. All hyperv features are tristate ones. So make tristate generating part common.
2. Reduce nesting on spinlocks.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
1. All hyperv features are tristate ones. So make tristate parsing code common.
2. Reindent switch statement.
3. Reduce nesting in spinlocks parsing.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
When reading in an XML definition for a SCSI target device, the name
property of struct scsi_target refers to the @target element.
Let's fix this obvious typo and also extend the XML schema to provide
validation.
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Most hypervisors use Hardware Assisted Paging by default and don't
require specifying the feature in domain conf. But some hypervisors
support disabling HAP on a per-domain basis. To enable HAP by default
yet provide a knob to disable it, extend the <hap> feature with a
'state=on|off' attribute, similar to <pvspinlock> and <vmport> features.
In the absence of <hap>, the hypervisor default (on) is used. <hap>
without the state attribute would be the same as <hap state='on'/> for
backwards compatibility. And of course <hap state='off'/> disables hap.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
VIR_DOMAIN_EVENT_SUSPENDED_POSTCOPY and VIR_DOMAIN_PAUSED_POSTCOPY are
used on the source host once migration enters post-copy mode (which
means the domain gets paused on the source. After the destination host
takes over the execution of the domain, its virtual CPUs are resumed and
the domain enters VIR_DOMAIN_RUNNING_POSTCOPY state and
VIR_DOMAIN_EVENT_RESUMED_POSTCOPY event is emitted.
In case migration fails during post-copy mode and none of the hosts have
complete state of the domain, both domains will remain paused with
VIR_DOMAIN_PAUSED_POSTCOPY_FAILED reason and an upper layer may decide
what to do.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
It's just a combination of AddImplicitControllers, and AddConsoleCompat.
Every caller that wants ImplicitControllers also wants the ConsoleCompat
AFAICT, so lump them together. We also need it for future patches.
Judging by how the whitelist has skewed quite far from the original
error message, I think it's better to just drop these.
If someone wants to revive this check I suggest implementing it on
a per-HV driver basis with PostParse callbacks.
If we expose this information, which is one byte in every PCI config
file, we let all mgmt apps know whether the device itself is an endpoint
or not so it's easier for them to decide whether such device can be
passed through into a VM (endpoint) or not (*-bridge).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1317531
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit id '4f846170' added printing of a new field 'part_separator';
however, neglected to do so when there was an "freeExtent" defined
for the device (as there would be when the disk pool was started).
This patch adjusts the logic to appropriately format the device path and
if there the part_separator attribute.
Just a cleanup I stumbled upon in one of my older branches I did when
browsing through some code and forgot to send it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add new function to manage adding the disk -drive options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also since using const virDomainDef in new function, that means other
functions called needed to change their usage.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the controller -device options to the
command line removing that task from the mainline qemuBuildCommandLine.
Also adjust to using const virDomainDef instead of virDomainDefPtr.
This causes collateral damage in order to modify called APIs to use
the const virDomainDef instead as well.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Extend the chardev source XML so that there is a new optional
<log/> element, which is applicable to all character device
backend types. For example, to log output of a TCP backed
serial port
<serial type='tcp'>
<source mode='connect' host='127.0.0.1' service='9999'/>
<protocol type='raw'/>
<log file='/var/log/libvirt/qemu/demo-serial0.log' append='on'/>
<target port='0'/>
</serial>
Not all hypervisors will support use of logfiles.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce VIR_DOMAIN_DEF_FEATURE_OFFLINE_VCPUPIN domain feature flag
whcih will allow to skip ignoring of the pinning information for
hypervisor drivers which will want to implement forward-pinning of
vcpus.
Introduce a helper to check supported device and domain config and move
the memory hotplug checks to it.
The advantage of this approach is that by default all new features are
considered unsupported by all hypervisors unless specifically changed
rather than the previous approach where every hypervisor would need to
declare that a given feature is unsupported.
To avoid having to forbid new features added to domain XML in post parse
callbacks for individual hypervisor drivers the feature flag mechanism
will allow to add a central check that will be disabled for the drivers
that will add support.
As a first example flag, the 'hasWideSCSIBus' is converted to the new
bitmap.
