We need to update one test-case because now new cgroup object will be
created only if there is any cgroup backend available.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This will be required once cgroup v2 is introduced. The cgroup
detection is not simple and we will have multiple backends so we
should not just jump into the middle of the detection code.
In order to use virCgroupNewSelf we need to create all the remaining
data files:
- {name}.cgroups represents /proc/cgroups, it is a list of cgroup
controllers compiled into kernel
- {name}.self.cgroup represents /proc/self/cgroup, it describes
cgroups to which the process belongs
For "no-cgroups" we need to modify the expected behavior because
virCgroupNewSelf() will fail if there are no controllers available.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Because we can set which files to return for cgroup tests there
is no need to have special function tailored to run tests.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Move all the cgroup data into separate files out of vircgroupmock.c
and rework the fopen function to load data from files. This will
make it easier to add more test cases.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If available, use b_info->nested_hvm instead of
b_info->u.hvm.nested_hvm. This will make nested HVM config available
also for PVH domains.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Otherwise starting PVH guest will result in "arch_setup_bootlate:
mapping shared_info failed (pfn=..., rc=-1, errno: 12): Internal error".
After this change the behavior is the same as in `xl`.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Coverity noted that each of the fmemopen called used the strlen value
in order to allocate space, but that neglected space for terminating
null string. So just add 1 to the strlen.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
It was already available in 1.5.0, so we can assume it's
present and avoid checking for it at runtime.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
A bunch of SCSI test cases in qemuxml2argv used
DO_TEST(...
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_VIRTIO_SCSI,
...);
instead of the intended
DO_TEST(...
QEMU_CAPS_VIRTIO_SCSI, QEMU_CAPS_SCSI_LSI,
...);
which is used correctly in qemuxml2xml. Fix them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We're only ever passing a single binary when calling this
function, so we can remove all code dealing with the
possibility of a second binary being specified.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
virCapabilitiesAddGuestDomain() takes an optional binary
name: this is intended for cases where a certain domain
type can't use the default one registered for the guest
architecture, but has to use a special binary instead.
The current code, however, will pass 'binary' again when
'kvmbin' is not defined, which is unnecessary as 'binary'
has been registered as default earlier, and will result
in capabilities output such as
<emulator>/usr/bin/qemu-system-x86_64</emulator>
<domain type='qemu'/>
<domain type='kvm'>
<emulator>/usr/bin/qemu-system-x86_64</emulator>
</domain>
with the second <emulator> element providing no additional
information.
Change it so that, when 'kvmbin' is not defined, NULL is
passed and so the default emulator will be used instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This patch is introducing cache monitor(CMT) to cache and
memory bandwidth monitor(MBM) for monitoring CPU memory
bandwidth.
The host capability of the two monitors is also introduced
in this patch.
For CMT, the host capability is shown like:
<host>
...
<cache>
<bank id='0' level='3' type='both' size='15' unit='MiB' cpus='0-5'>
<control granularity='768' min='1536' unit='KiB' type='both' maxAllocs='4'/>
</bank>
<monitor level='3' 'reuseThreshold'='270336' maxMonitors='176'>
<feature name='llc_occupancy'/>
</monitor>
</cache>
...
</host>
For MBM, the capability is shown like this:
<host>
...
<memory_bandwidth>
<node id='1' cpus='6-11'>
<control granularity='10' min ='10' maxAllocs='4'/>
</node>
<monitor maxMonitors='176'>
<feature name='mbm_total_bytes'/>
<feature name='mbm_local_bytes'/>
</monitor>
</memory_bandwidth>
...
</host>
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
The libxl_domain_config_from_json API appeared in Xen 4.5, hence
there is no need to check for its existence after changing the
minimum supported Xen version to 4.6. Remove the check and its
use in the tests.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU commits:
e37a5c7fa4 (v2.12.0)
i386: Add Intel Processor Trace feature support
c2f193b538 (v2.7.0)
target-i386: Add support for UMIP and RDPID CPUID bits
aff9e6e46a (v2.12.0)
x86/cpu: Enable new SSE/AVX/AVX512 cpu features
f77543772d (v2.9.0)
x86: add AVX512_VPOPCNTDQ features
5131dc433d (v3.1.0)
i386: Add CPUID bit for PCONFIG
59a80a19ca (v3.1.0)
i386: Add CPUID bit for WBNOINVD
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Now that we know what metadata lock manager user wishes to use we
can load it when initializing security driver. This is achieved
by adding new argument to virSecurityManagerNewDriver() and
subsequently to all functions that end up calling it.
The cfg.mk change is needed in order to allow lock_manager.h
inclusion in security driver without 'syntax-check' complaining.
This is safe thing to do as locking APIs will always exist (it's
only backend implementation that changes). However, instead of
allowing the include for all other drivers (like cpu, network,
and so on) allow it only for security driver. This will still
trigger the error if including from other drivers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
So far the virLockSpaceAcquireResource() locks the first byte in
the underlying file. But caller might want to lock other range.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The directory has been renamed in 562990849a, but a
reference to it was not updated at the same time, causing
'make dist' to fail ever since. Fix it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
It was already available in 1.5.0.
Moreover, we're not even formatting it on the QEMU command
line, ever: we just use it as part of some logic that decides
whether KVM support should be advertised, and as it turns out
that logic is actually buggy and dropping this capability
fixes it.
https://bugzilla.redhat.com/show_bug.cgi?id=1628469
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
More specifically, everything that's tested by qemucapabilities
now goes through qemucaps2xml as well.
Ideally we'll rewrite both so that listing all test cases is
unnecessary and they get picked up automatically by listing the
contents of the input directory instead, but that's a refactor
for another day :)
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
While qemucaps2xml has a meager two test cases to its name, we
have plenty of data from qemucapabilities which is taken from
actual QEMU binaries, covers pretty much all supported QEMU
versions and architectures and is even in the right format already!
Rewrite qemucaps2xml so that it uses qemucapabilities data as
input. Right now we have a single test case, but we're going to
add a lot more next.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
After removing the host CPU model re-computation,
this function is no longer necessary.
This reverts commits:
commit d0498881a0
virQEMUCapsFreeHostCPUModel: Don't always free host cpuData
commit 5276ec712a
testUpdateQEMUCaps: Don't leak host cpuData
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Make it obvious when it is used intentionally and error
out when used in combination with real capabilities.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
None of the things testUpdateQEMUCaps adjusts are applicable
for tests that use the DO_TEST_CAPS macros, i.e.
real QEMU capabilities parsed from the XML files:
The architecture must be chosen before we even open the caps
file, CPU models are already present and the expensive HostModel
computation was already done in virQEMUCapsLoadCache.
Introduce FLAG_REAL_CAPS and skip the whole testUpdateQEMUCaps
function for DO_TEST_CAPS.
This speeds up the test by 25 %
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that the function is only run if requested by
the FLAG_STEAL_VM flag, we know that missing data
is an error, not a request to skip the test.
The existence of the output file is now checked by
virTestCompareToFile, which allows usage of
the VIR_TEST_REGENERATE_OUTPUT=1 env variable
to generate new test cases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use the recently introduced flag as a witness.
This reduces the apparent number of test cases
to the real number of test cases.
Note that this does not suffer from the same problem
as commit 70255fa was fixing, because the condition
for running virTestRun does not depend on results
of previous tests.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use this macro to indicate the intention to also
run the XML->startup XML test.
It sets the newly introduced FLAG_STEAL_VM flag,
which is the new witness for the XML->argv test
to leave the VM object behind.
This will allow us to report proper errors in
XML->startup tests.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
virDomainDefCollectBootOrder() is called for every item on the list
for each type of device. One of the checks it makes is to gather the
order attributes from the <boot> element of all devices, and assure
that no two devices have been given the same order.
Since (internally to libvirt, *not* in the domain XML) an <interface
type='hostdev'> is on both the list of hostdev devices and the list of
network devices, it will be counted twice, and the code that checks
for multiple devices with the same boot order will give a false
positive.
To remedy this, we make sure to return early for hostdev devices that
have a parent.type != NONE.
This was introduced in commit 5b75a4, which was first in libvirt-4.4.0.
Resolves: https://bugzilla.redhat.com/1601318
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability was introduced in QEMU 1.5.0, which is our
minimum supported QEMU version these days.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability was introduced in QEMU 1.3.1 and we require
QEMU 1.5.0 these days.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced by commit <af204232>.
Made redundant by commit 1e9a083 which switched to using
qemuProcessCreatePretendCmd, where capabilities are filtered
in qemuProcessInit after being fetched from the cache.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Commit 0bdb704 renamed the corresponding xml->argv tests,
but due to the optimistic nature of xml->startup xml testing,
this test was quietly skipped.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1613737
When processing the inputvol for encryption, we need to handle
the case where the inputvol is encrypted. This then allows for
the encrypted inputvol to be used either for an output encrypted
volume or an output volume of some XML provided type.
Add tests to show the various conversion options when either input
or output is encrypted. This includes when both are encrypted.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 39cef12a9 altered/fixed the inputvol processing to create
a multistep process when using an inputvol to create an encrypted
output volume; however, it unnecessarily assumed/restricted the
inputvol to be of 'raw' format only.
Modify the processing code to allow the inputvol format to be checked
and used in order to create the encrypted volume.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 39015a6f3 modified the test to be more reliable/realistic,
but without checking the return status of virEventRunDefaultImpl
it's possible that the test could run infinitely.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Previous commits removed all capabilities from per-device property
probing for:
pci-assign
kvm-pci-assign
usb-host
scsi-generic
Remove them from the virQEMUCapsDeviceProps list and get rid of the
redundant device-list-properties QMP calls.
Note that 'pci-assign' was already useless, because the QMP version
of the device is called 'kvm-pci-assign', see libvirt commit 7257480
from 2012.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduced by QEMU commit 28b77657 in v1.0-rc4~21^2~8.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduced by QEMU commit c29029d which was included in 1.5.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
At the time of the addition of 'pci-assign' in QEMU commit
v1.3.0-rc0~572^2 the bootindex argument was already supported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
At the time of the addition of 'pci-assign' in QEMU commit
v1.3.0-rc0~572^2 the configfd argument was already supported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
