There are a few cases where we are using either WHEN_ACTIVE
or WHEN_INACTIVE even though WHEN_BOTH would work perfectly
fine: for those, start using the simpler DO_TEST() macro.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
disk-mirror-old has different output file for the active and
inactive parts, which should be named accordingly; on the other
hand, both output files for disk-backing-chains-noindex are
identical, so it makes sense to only keep around one and remove
the (in-)active suffix.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add <controller type='scsi' model handling for virtio transitional
devices. Ex:
<controller type='scsi' model='virtio-transitional'/>
* "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional"
The naming here doesn't match the pre-existing model=virtio-scsi.
The prescence of '-scsi' there seems kind of redundant as we have
type='scsi' already, so I decided to follow the pattern of other
patches and use virtio-transitional etc.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<input> devices lack the model= attribute which is used by
most other device types. To eventually support
virtio-input-host-pci-{non-}traditional in qemu, let's add
a standard model= attribute. This just adds the domain_conf
wiring
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<filesystem> devices lack the model= attribute which is used by
most other device types. To eventually support
virtio-9p-pci-{non-}traditional in qemu, let's add a standard
model= attribute. The accepted values are:
- virtio
- virtio-transitional
- virtio-non-transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
qemu vhost-scsi devices map to XML roughly like:
<hostdev mode='subsystem' type='scsi_host'>
<source protocol='vhost' wwpn=X/>
</hostdev>
To support vhost-scsi-pci-{non-}traditional in qemu, we
need to to extend the SCSI Host hostdev XML to handle
model= value. This matches the XML model= format used
for mediated devices. This is just the domain_conf bits
and some XML test cases.
Use of virtio-X naming here does not match the hostdev
protocol=vhost nor does it match the qemu vhost-X device
naming, however it's more consistent with all other
model= names in this area, and also matches the
inconsistency of <vsock> devices which use model=virtio
but map to vhost-vsock on the qemu commandline
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add new <disk> model values for virtio transitional devices. When
combined with bus='virtio':
* "virtio-transitional" maps to qemu "virtio-blk-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-blk-pci-non-transitional"
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<disk> devices lack the model= attribute which is used by
most other device types. bus= mostly acts as one, but it
serves other purposes too like determing what target=
prefix to use, and for matching against controller type=
values.
Extending bus= to handle additional virtio transitional
devices will complicate apps lives, and it isn't a clean
mapping anyways. So let's bite the bullet and add a new
<disk model=X/> attribute, and wire up common handling
for virtio and virtio-{non-}transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Upcoming addition of a new field will need to make sure that SCSI disk
serial is tested as well. Add a case to one of the existing tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add full and empty cdroms on 'usb' and 'sd' bus to have test
coverage. Note that this does not guarantee that qemu will accept them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Attempting to create an empty virtio-blk drive results into:
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0xc,drive=drive-virtio-disk1,id=virtio-disk1: Device needs media, but drive is empty
Attempting to eject media from virtio-blk based drive results into:
error: internal error: unable to execute QEMU command 'eject': Device 'drive-virtio-disk0' is not removable
Forbid configurations where users would attempt to use cdroms in virtio
bus.
Fix few wrong examples which are not really relevant to the tested code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Now that we have a specific test for testing the 'virtio-scsi'
controller and other tests which test a combination of scsi and non-scsi
devices this test no longer makes sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Post parse callback adds the 'raw' type only for local files. Remote
files can also have backing store (even local) so we should do this also
for network backed storage.
Note that virStorageFileGetMetadata always considers files with no type
as raw so we will not accidentally traverse the backing chain and allow
unexpected files being labelled with svirt labels.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify some existing tests of network-based disks to omit the storage
format specification.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This shows users can now use PCI for RISC-V guests, as long
as they opt into it by manually assigning addresses.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcomming change will influence CDROM with cache mode so add a test
case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
NVDIMM emulation will mmap the backend file, it uses host pagesize
as the alignment of mapping address before, but some backends may
require alignments different from the pagesize. So the 'alignsize'
option is introduced to allow specification of the proper alignment:
<devices>
...
<memory model='nvdimm' access='shared'>
<source>
<path>/dev/dax0.0</path>
<alignsize unit='MiB'>2</alignsize>
</source>
<target>
<size unit='MiB'>4094</size>
<node>0</node>
<label>
<size unit='MiB'>2</size>
</label>
</target>
</memory>
...
</devices>
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Remove the disk from tests focusing on other aspects so that change to
-blockdev will touch less tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unlike with SPICE and SDL which use the <gl> subelement to enable OpenGL
acceleration, specifying egl-headless graphics in the XML has
essentially the same meaning, thus in case of egl-headless we don't have
a need for the 'enable' element attribute and we'll only be interested
in the 'rendernode' one further down the road.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add new functions to generate zPCI command string and append it to
QEMU command line. And the related tests are added.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This patch introduces new XML parser/formatter functions. Uid is
16-bit and non-zero. Fid is 32-bit. They are the two attributes of zpci
which is introduced as PCI address element. Zpci element is parsed and
formatted along with PCI address. And add the related test cases.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
QEMU 3.1 supports Hyper-V-style PV IPIs making it cheaper for Windows
guests to send an IPI, especially when it targets many CPUs.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
virDomainDefCollectBootOrder() is called for every item on the list
for each type of device. One of the checks it makes is to gather the
order attributes from the <boot> element of all devices, and assure
that no two devices have been given the same order.
Since (internally to libvirt, *not* in the domain XML) an <interface
type='hostdev'> is on both the list of hostdev devices and the list of
network devices, it will be counted twice, and the code that checks
for multiple devices with the same boot order will give a false
positive.
To remedy this, we make sure to return early for hostdev devices that
have a parent.type != NONE.
This was introduced in commit 5b75a4, which was first in libvirt-4.4.0.
Resolves: https://bugzilla.redhat.com/1601318
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virtio-serial is an alias for virtio-serial-pci, which
should not have been used for a PCIe-less aarch64/virt
guest but it ended up being used anyway because the
virtio-mmio capability was missing and the algorithm
is buggy.
Fix the test case so that we can fix the algorithm next.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
None of the existing models is suitable for use with
RISC-V virt guests, and we don't want information about
the serial console to be missing from the XML.
The name is based on comments in qemu/hw/riscv/virt.c:
RISC-V machine with 16550a UART and VirtIO MMIO
and in qemu/hw/char/serial.c:
QEMU 16550A UART emulation
along with the output of dmesg in the guest:
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13,
base_baud= 230400) is a 16550A
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to backing store indexes which will become stable eventually
we need also to be able to format and store in the status XML for later
use the index for the top level of the backing chain.
Add XML formatter, parser, schema and docs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a user configures the backing chain in the XML we should not ignore
it. We already do parse it but don't format it out. As a
safety-precaution don't attempt to format detected chain into the
inactive XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add test data for nested backing chains with/without indexes (used in
status XMLs) which will excercise blockdev and the related work.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Qemu-3.0 supports Hyper-V-style PV TLB flush, Windows guests can benefit
from this feature as KVM knows which vCPUs are not currently scheduled (and
thus don't require any immediate action).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Qemu-3.0 supports so-called 'Reenlightenment' notifications and this (in
conjunction with 'hv-frequencies') can be used make Hyper-V on KVM pass
stable TSC page clocksource to L2 guests.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Qemu-2.12 gained 'hv-frequencies' cpu flag to enable Hyper-V frequency
MSRs. These MSRs are required (but not sufficient) to make Hyper-V on
KVM pass stable TSC page clocksource to L2 guests.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If a domain has hugepages configured and we're currently building
memory-backend-file for a nvdimm device that domain has we will
put hugepages path onto the command line. It should have been
nvdimm path configured in the XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Previously we were ignoring "nodeset" attribute for hugepage pages
if there was no guest NUMA topology configured in the domain XML.
Commit <fa6bdf6afa878b8d7c5ed71664ee72be8967cdc5> partially fixed
that issue but it introduced a somehow valid regression.
In case that there is no guest NUMA topology configured and the
"nodeset" attribute is set to "0" it was accepted and was working
properly even though it was not completely valid XML.
This patch introduces a workaround that it will ignore the nodeset="0"
only in case that there is no guest NUMA topology in order not to
hit the validation error.
After this commit the following XML configuration is valid:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='0'/>
</hugepages>
</memoryBacking>
but this configuration remains invalid:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='0'/>
<page size='1048576' unit='KiB'/>
</hugepages>
</memoryBacking>
The issue with the second configuration is that it was originally
working, however changing the order of the <page> elements resolved
into using different page size for the guest. The code is written
in a way that it expect only one page configured and always uses only
the first page in case that there is no guest NUMA topology configured.
See qemuBuildMemPathStr() function for details.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1591235
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We can safely validate the hugepage nodeset attribute at a define time.
This validation is not done for already existing domains when the daemon
is restarted.
All the changes to the tests are necessary because we move the error
from domain start into XML parse.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This use-case was broken by commit
<fa6bdf6afa878b8d7c5ed71664ee72be8967cdc5>.
We allowed this configuration and it was working as expected therefore
we can consider it as regression. We should have never allowed such
configuration so now the best solution is in case of non-numa guest
silently ignore the 'nodeset' attribute if it's set to '0'.
That will be fixed by following patches.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This test case is currently working but it uncovers existing issue
in our code that the generated QEMU commandline uses the default 1G
hugepage instead of the 2M hugepage specified for exact node.
The issue in our code is that for non-numa guests we take into account
only the first hugepage. This will be fixed as invalid configuration
since it doesn't make any sense to set default and specific hugepage
for non-numa guest.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Remove unnecessary XML elements as well.
<numatune> for numa guest is tested by numatune-memnode test.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
From the args output you can see that the 'discard' feature is not
honored if you don't use hugepages, that is a bug, following patche
will fix it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
There are couple of files that are the same in both
qemuxml2argvdata and qemuxml2xmloutdata directories. Link them
instead of having full copy.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The field was added in qemu v0.13.0-rc0-731-g1ca4d09ae0 so all supported
qemu versions now use it.
There's a LOT of test fallout as we did not use capabilities close
enough to upstream for many of our tests.
Several tests had a 'bootindex' variant. Since they'd become redundant
they are also removed here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have several cases when a VM has multiple disks in the test files so
having another one without any interesting configuration is not
necessary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the authentication and ipv6 cases into the main test file. To allow
removal of the separate testing of the secure credential passing via the
'secret' object in qemu, use the DO_TEST_CAPS_VER macro with version
2.5.0 when the secret object is not supported by qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The xml2argv variant was unused. The xml2xml variant is redundant in
other tests for RBD.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move various different iSCSI configuration into one test file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the 'unsafe' cache test into 'disk-cache' and remove all the
individual cases for one cache mode each.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We also have disk-copy_on_read.xml which also tests the command line.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically, we've always enabled an emulated video device every time we
see that graphics should be supported with a guest. With the appearance
of mediated devices which can support QEMU's vfio-display capability,
users might want to use such a device as the only video device.
Therefore introduce a new, effectively a 'disable', type for video
device.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
QEMU 2.12 introduced a new type of display for mediated devices using
vfio-pci backend which allows a mediated device to be used as a VGA
compatible device as an alternative to an emulated video device. QEMU
exposes this feature via a vfio device property 'display' with supported
values 'on/off/auto' (libvirt will default to 'off').
This patch adds the necessary bits to domain config handling in order to
expose this feature. Since there's no convenient way for libvirt to come
up with usable defaults for the display setting, simply because libvirt
is not able to figure out which of the display implementations - dma-buf
which requires OpenGL support vs vfio regions which doesn't need OpenGL
(works with OpenGL enabled too) - the underlying mdev uses.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since 2.10 QEMU supports a new display type egl-headless which uses the
drm nodes for OpenGL rendering copying back the rendered bits back to
QEMU into a dma-buf which can be accessed by standard "display" apps
like VNC or SPICE. Although this display type can be used on its own,
for any practical use case it makes sense to pair it with either VNC or
SPICE display. The clear benefit of this display is that VNC gains
OpenGL support, which it natively doesn't have, and SPICE gains remote
OpenGL support (native OpenGL support only works locally through a UNIX
socket, i.e. listen type=socket/none).
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Add multiple drives with the various configurations rather than having
multiple tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently we format the serial, geometry and error policy on the -drive
backend argument.
QEMU added the ability to set serial and geometry on the frontend in
the 1.2 release deprecating use of -drive, with support being deleted
from -drive in 3.0.
We keep formatting error policy on -drive for now, because we don't
ahve support for that with -device for usb-storage just yet.
Note that some disk buses (sd) still don't support -device. Although
QEMU allowed these properties to be set on -drive for if=sd, they
have been ignored so we now report an error in this case.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This doesn't seem very useful at the moment, but it will make
sense once we introduce another HPT-related setting.
The output XML is decoupled from the input XML in preparation
of future changes as well; while doing so, we can shave a few
lines off the latter.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Add test case explicitly defining a smartcard host certificates
database via the following xml:
<smartcard mode='host-certificates'>
<database>/tmp/foo</database>
</smartcard>
This case is not currently covered in the test suite.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The default is stable per machine type so there should be no need to keep that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1469338
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Format probing will be dropped so remove the tests which will become
obsolete.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch extends the TPM's device XML with TPM 2.0 support. This only works
for the emulator type backend and looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator' version='2.0'/>
</tpm>
The swtpm process now has --tpm2 as an additional parameter:
system_u:system_r:svirt_t:s0:c597,c632 tss 18477 11.8 0.0 28364 3868 ? Rs 11:13 13:50 /usr/bin/swtpm socket --daemon --ctrl type=unixio,path=/var/run/libvirt/qemu/swtpm/testvm-swtpm.sock,mode=0660 --tpmstate dir=/var/lib/libvirt/swtpm/testvm/tpm2,mode=0640 --log file=/var/log/swtpm/libvirt/qemu/testvm-swtpm.log --tpm2 --pid file=/var/run/libvirt/qemu/swtpm/testvm-swtpm.pid
The version of the TPM can be changed and the state of the TPM is preserved.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds support for an external swtpm TPM emulator. The XML for
this type of TPM looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator'/>
</tpm>
The XML will currently only define a TPM 1.2.
Extend the documentation.
Add a test case testing the XML parser and formatter.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The encryption was buggy and qemu actually dropped it upstream. Forbid
it for all versions since it would cause other problems too.
Problems with the old encryption include weak crypto, corruption of
images with blockjobs and a lot of usability problems.
This requires changing of the encryption type for the encrypted disk
tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
