The virDomainNumatuneNodeSpecified() function does not write into
passed @numatune pointer, it just reads from it. Therefore, the
argument should be const, which allows this function to be called
from places where virDomainNuma is already const (e.g. domain
validation code).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The type='pty' attribute in the <serial> element causes a Pseudo TTY to be
allocated on the host side via "/dev/ptmx", which is meant to be
interacted with via "virsh console" or similar.
That's not how a firmware log is typically viewed or saved. Replace
type='pty' with type='file', and also provide an example <source> element
(with the pathname of the logfile), similarly to how the <serial> example
just above provides a <source> element too.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Andrea Bolognani <abologna@redhat.com>
Updates: 654968381d
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The <serial> opening tag is paired with the </console> closing tag; that's
a mismatch. The question is then whether to modify the former to
<console>, or the latter to </serial>.
Per section "Relationship between serial ports and consoles", <serial> is
used for emulated (not paravirt) consoles, and it's the type that's
suitable for early debug output (such as from firmware). Thus, change
</console> to </serial>.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Andrea Bolognani <abologna@redhat.com>
Fixes: 654968381d
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add new compress methods zlib and zstd for parallel migration,
these method should be used with migration option --comp-methods
and will be processed in 'qemuMigrationParamsSetCompression'.
Note that only one compress method could be chosen for parallel
migration and they cann't be used in compress migration.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add migrate options: --compression-zlib-level
--compression-zstd-level
These options are used to set compress level for "zlib"
or "zstd" during parallel migration if the compress method
is specified.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add description for VIR_MIGRATE_PARAM_COMPRESSION, it will
be reused in choosing compression method during parallel migration.
Add public API VIR_MIGRATE_PARAM_COMPRESSION_ZLIB_LEVEL,
VIR_MIGRATE_PARAM_COMPRESSION_ZSTD_LEVEL for migration APIs
to support set compress level during parallel migration.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Wrap the auto-generated pages (API ref and hvsupport.html) in the proper
top level element similarly to what the pages generated from RST have to
remove the extra case when templating our web.
(Best viewed with 'git show -w')
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we need to generate API docs for multiple input files the index
page is not useful for us and was replaced by a manual one. Drop the XSL
for generating it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The auto-generated index contains only references to one run of the
generator but we in total run it 4 times missing the admin, lxc, and
qemu specific apis.
Rewrite it manually so that we can drop the generator for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the table is not so wide we can treat it as any other page.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Common APIs such as virConnectOpen/Close and similar which are used by
the non-hypervisor drivers in libvirt are grouped together with
hypervisor drivers, which makes the table very wide.
Split them out into a separate group and clean up the list of hypervisor
drivers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the proper driver struct member names for the aforementioned APIs so
that the fixup of the versions works properly.
Currently we reported that no of the drivers supported the APIs despite
being only shims above 'open'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only remaining page was 'hvsupport.html' which is generated by
'scripts/hvsupport.py'. The script already has all the data to generate
the table of contents internally so we can remove the whole complicated
template.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Final piece of conversion of our non-generated pages to 'rst'.
Special raw HTML is used for adding the appropriate code to fetch the
blog planet.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only special bit about the 'acl' page was the inclusion of the
objects and permissions tables. We can do that by the '.. raw::'
directive.
One reference from 'aclpolkit.rst' needed to be updated to go with the
new header anchor naming.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the same 'margin-bottom' bot for the normal and mobile layout fixing
one of the panels touching the footer.
Use same font size both for <h1> and <h2> used as the column titles as
rst2html5 based on version can generate either of them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the full width of the parent box and drop the unnecessarily bigger
margin.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the '#index' id to select the proper page as the body element
doesn't have 'index' class.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When the pages were converted to rST it required changes to how the
panels are created. This change was not reproduced in the specific media
override for narrow displays and thus made those pages unusable.
Note that two lines per document are needed as some rst2html5 versions
format a <div class='section'> and others do a <section> element
instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's nothing with such element id. The last mention was removed in
2818359075
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The parser makes the values mandatory and also the qemu code implements
actions for those values. The formatter skips them though. Since
format+parse is used to copy the XML at startup a definition with those
values can't be started.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2203709
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use DO_TEST_CAPS_LATEST to run with the latest capapbilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert all of the 'audio-default-*' cases to use capabilities from
qemu-4.2 instead of the fake caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Symlinks are hard to maintain and especially un-cool when attempting to
test against real capapbilities.
Replace symlinks by real files first so that we can switch to real caps
and see the difference.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is pretty trivial, just append "mte=on/off" to -machine
arguments.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The MTE feature is not supported by all QEMUs, only those with
QEMU_CAPS_MACHINE_VIRT_MTE capability.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The MTE feature (introduced in QEMU commit of v5.1.0-rc1~8^2~11)
is detectable via 'qom-list-properties' for 'virt' machine type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The Memory Tagging Extensions are hardware acceleration present
in some ARM processors that allow memory error detection [1].
Introduce a domain XML knob that turns them on or off.
1: https://www.arm.com/blogs/blueprint/memory-safety-arm-memory-tagging-extension
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After previous cleanup, there's not a single caller that would
call qemuDomainGetMemLockLimitBytes() with @forceVFIO set. All
callers pass false.
Drop the unneeded argument from the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After previous cleanup, there's not a single caller that would
call qemuDomainAdjustMaxMemLock() with @forceVFIO set. All callers
pass false.
Drop the unneeded argument from the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
During hotplug of a NVMe disk we need to adjust the memlock
limit. The computation of the limit is handled by
qemuDomainGetMemLockLimitBytes() which looks at given domain
definition and accounts for various device types (as different
types require different amounts). But during disk hotplug the
disk is not added to domain definition until the very last
moment. Therefore, qemuDomainGetMemLockLimitBytes() has this
@forceVFIO argument which tells it to assume VFIO even if there
are no signs of VFIO in domain definition. And this kind of
works, until the amount needed for NVMe disks changed (in
v9.3.0-rc1~52). What's missing in the commit is making @forceVFIO
behave the same as if there was an NVMe disk present in the
domain definition.
But, we can do even better - just mimic whatever we're doing for
hostdevs. IOW - introduce qemuDomainAdjustMaxMemLockNVMe() that
behaves the same as qemuDomainAdjustMaxMemLockHostdev().
There are subtle differences though:
1) qemuDomainAdjustMaxMemLockHostdev() can afford placing hostdev
right at the end of vm->def->hostdevs, because the array was
already reallocated (at the beginning of
qemuDomainAttachHostPCIDevice()). But
qemuDomainAdjustMaxMemLockNVMe() doesn't have that luxury.
2) qemuDomainAdjustMaxMemLockHostdev() places a
virDomainHostdevDef pointer into domain definition, while
qemuDomainStorageSourceAccessModifyNVMe() (which calls
qemuDomainAdjustMaxMemLock()) sees a virStorageSource pointer
but domain definition contains virDomainDiskDef. But that's
okay, we can create a dummy disk definition and append it into
the domain definition.
After this, qemuDomainAdjustMaxMemLock() can be called with
@forceVFIO = false, as the disk is now part of domain definition
(when computing the new limit).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2014030#c28
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
One of our examples in the 'formatbackup.rst' page shows following
config:
<disk name='vda' backup='yes'/>
The schema didn't allow it though. Fix the schema as the internals were
supposed to support it (except for the bug fixed in previous patches).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the 'disk->store' property is already allocated which happens e.g.
when the disk is described by the backup XML but the optional filename
is not filled in 'virDomainBackupDefAssignStore' would not fill in the
default location.
Fix the logic to do it also if a 'virStorageSource' categorizes as
empty.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With musl-1.2.3: I get the following macros defined (from
$builddir/meson-config.h):
#define WITH_LSTAT 1
#define WITH_LSTAT64 1
#define WITH_LSTAT_DECL 1
#define WITH_STAT 1
#define WITH_STAT64 1
#define WITH_STAT_DECL 1
#define WITH___LXSTAT 1
#define WITH___LXSTAT64 1
#define WITH___XSTAT 1
#define WITH___XSTAT64 1
which in turn means the virmockstathelpers.c ends up defining:
MOCK_STAT64
MOCK_LSTAT64
But with musl-1.2.4 everything changes and the set of defined
macros gets simplified to:
#define WITH_LSTAT 1
#define WITH_LSTAT_DECL 1
#define WITH_STAT 1
#define WITH_STAT_DECL 1
#define WITH___LXSTAT 1
#define WITH___XSTAT 1
which results in no MOCK_* macros defined in
virmockstathelpers.c, i.e. no stat() mocking, nada. The reason
for this simplification are these musl commits [1][2] which
removed all 64 bit aliases. And that's not what our logic for
deciding what flavor of stat() to mock counted with.
Nevertheless, we do build with Alpine Linux in our CI, so how
come we don't see this problem there? Well, simply because Alpine
Linux maintainers decided to revert the commits [3][4]. But on
distributions that use vanilla musl, this problem can be seen
easily.
1: https://git.musl-libc.org/cgit/musl/commit/?id=246f1c811448f37a44b41cd8df8d0ef9736d95f4
2: https://git.musl-libc.org/cgit/musl/commit/?id=25e6fee27f4a293728dd15b659170e7b9c7db9bc
3: https://git.alpinelinux.org/aports/commit/main/musl?id=6a5563fbb45b3d9d60678d7bbf60dbb312a2d481
4: https://git.alpinelinux.org/aports/commit/main/musl?id=a089bd852f8983623fa85e0f5755a3e25bf53c72
Resolves: https://bugs.gentoo.org/906167
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Currently translated at 2.7% (284 of 10399 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/hu/
Co-authored-by: Dankaházi (ifj.) István <dankahazi.istvan@gmail.com>
Signed-off-by: Dankaházi (ifj.) István <dankahazi.istvan@gmail.com>
Reflect the new default value, and explain that a runtime
lookup will be performed if the value is not an absolute path.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we're performing the lookup at runtime, doing it at
build time is no longer necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Don't bother looking at /usr/libexec, since every distro
ships dbus-daemon in $PATH.
Note that it's still possible for the administrator to prevent
this lookup and use an arbitrary binary by setting the
appropriate key in qemu.conf.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reflect the new default value, and explain that a runtime
lookup will be performed if the value is not an absolute path.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Now that we're performing the lookup at runtime, doing it at
build time is no longer necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use the recently introduced virFindFileInPathFull() function to
discover the path for qemu-bridge-helper and qemu-pr-helper at
runtime.
Note that it's still possible for the administrator to prevent
this lookup and use arbitrary binaries by setting the
appropriate keys in qemu.conf: this simply removes the need to
perform the lookup at build time, and thus to have the helpers
installed in the build environment.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>