We're about to allow IOThreads to be deleted, but an iothreadid may be
included in some domain thread sched, so add a new API to allow removing
an iothread from some entry.
Then during the writing of the threadsched data and an additional check
to determine whether the bitmap is all clear before writing it out.
Since it's only ever referenced in domain_conf.c, make the function
static, but also will need to move it to somewhere before it's referenced
rather than forward referencing it.
Adding a new XML element 'iothreadids' in order to allow defining
specific IOThread ID's rather than relying on the algorithm to assign
IOThread ID's starting at 1 and incrementing to iothreads count.
This will allow future patches to be able to add new IOThreads by
a specific iothread_id and of course delete any exisiting IOThread.
Each iothreadids element will have 'n' <iothread> children elements
which will have attribute "id". The "id" will allow for definition
of any "valid" (eg > 0) iothread_id value.
On input, if any <iothreadids> <iothread>'s are provided, they will
be marked so that we only print out what we read in.
On input, if no <iothreadids> are provided, the PostParse code will
self generate a list of ID's starting at 1 and going to the number
of iothreads defined for the domain (just like the current algorithm
numbering scheme). A future patch will rework the existing algorithm
to make use of the iothreadids list.
On output, only print out the <iothreadids> if they were read in.
This is basically turning qemuDomObjEndAPI into a more general
function. Other drivers which gets a reference to domain objects may
benefit from this function too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1113474
When we set the MAC address of a network device as a part of setting
up macvtap "passthrough" mode (where the domain has an emulated netdev
connected to a host macvtap device that has exclusive use of the
physical device, and sets the device MAC address to match its own,
i.e. "<interface type='direct'> <source mode='passthrough' .../>"), we
use ioctl(SIOCSIFHWADDR) giving it the name of that device. This is
true even if it is an SRIOV Virtual Function (VF).
But, when we are setting the MAC address / vlan ID of a VF in
preparation for "hostdev network" passthrough (this is where we set
the MAC address and vlan id of the VF after detaching the host net
driver and before assigning the device to the domain with PCI
passthrough, i.e. "<interface type='hostdev'>", we do the setting via
a netlink RTM_SETLINK message for that VF's Physical Function (PF),
telling it the VF# we want to change. This sets an "administratively
changed MAC" flag for that VF in the PF's driver, and from that point
on (until the PF driver is reloaded, *not* merely the VF driver) that
VF's MAC address can't be changed using ioctl(SIOCSIFHWADDR) - the
only way to change it is via the PF with RTM_SETLINK.
This means that if a VF is used for hostdev passthrough, it will have
the admin flag set, and future attempts to use that VF for macvtap
passthrough will fail.
The solution to this problem is to check if the device being used for
macvtap passthrough is actually a VF; if so, we use the netlink
RTM_SETLINK message to the PF to set the VF's mac address instead of
ioctl(SIOCSIFHWADDR) directly to the VF; if not, behavior does not
change from previously.
There are three pieces to making this work:
1) virNetDevMacVLan(Create|Delete)WithVPortProfile() now call
virNetDev(Replace|Restore)NetConfig() rather than
virNetDev(Replace|Restore)MacAddress() (simply passing -1 for VF#
and vlanid).
2) virNetDev(Replace|Restore)NetConfig() check to see if the device is
a VF. If so, they find the PF's name and VF#, allowing them to call
virNetDev(Replace|Restore)VfConfig().
3) To prevent mixups when detaching a macvtap passthrough device that
had been attached while running an older version of libvirt,
virNetDevRestoreVfConfig() is potentially given the preserved name
of the VF, and if the proper statefile for a VF can't be found in
the stateDir (${stateDir}/${pfname}_vf${vfid}),
virNetDevRestoreMacAddress() is called instead (which will look in
the file named ${stateDir}/${vfname}).
This problem has existed in every version of libvirt that has both
macvtap passthrough and interface type='hostdev'. Fortunately people
seem to use one or the other though, so it hasn't caused any real
world problem reports.
This revealed that GuestDefaultEmulator was a bit buggy, capable
of returning an emulator that didn't match the passed domain type. Fix
up the test suite input to continue to pass.
This is a helper function to look up all capabilities data for all
the OS bits that are relevant to <domain>. This is
- os type
- arch
- domain type
- emulator
- machine type
This will be used to replace several functions in later commits.
But the internal API stays the same, and we just convert the value as
needed. Not useful yet, but this is the beginning step of using an enum
for ostype throughout the code.
This is a simple wrapper around virNetDevBandwidthManipulateFilter() that
will update the desired filter on an interface (usually a network bridge)
with a new MAC address. Although, the MAC address in question usually
refers to some other interface - the one that the filter is constructed
for. Yeah, hard to parse. Thing is, our NATed network has a bridge where
some part of QoS takes place. And vNICs from guests are plugged into
the bridge. However, if a guest decides to change the MAC of its vNIC,
the corresponding qemu process emits an event which we can use to
update the QoS configuration based on the new MAC address.. However,
our QoS hierarchy is currently not notified, therefore it falls apart.
This function (when called in response to the aforementioned event)
will update our QoS hierarchy and duct tape it together again.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add virStringHasControlChars that checks if the string has
any control characters other than \t\r\n,
and virStringStripControlChars that removes them in-place.
Two non-static functions in virjson.c were missing their export info in
libvirt_private.syms, so they couldn't be used anywhere it the code (and
that's about to get changed).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Rename it to virNetDevGetIPv4AddressIoctl and make
virNetDevGetIPAddress a wrapper around it, allowing
other ways of getting the address to be implemented,
and still falling back to the old method.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Create a new common API to replace the virCgroupNew{Vcpu|Emulator|IOThread}
API's using an emum to generate the cgroup name
Signed-off-by: John Ferlan <jferlan@redhat.com>
This new internal API checks if given CGroup controller is
available. It is going to be needed later when we need to make a
decision whether pin domain memory onto NUMA nodes using cpuset
CGroup controller or using numa_set_membind().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introduce virStoragePoolSaveState to properly format the state XML in
the same manner as virStoragePoolDefFormat, except for adding a
<poolstate> ... </poolstate> around the definition. This is similar to
virNetworkObjFormat used to save the live/active network information.
Instead of always using controller 0 and incrementing port number,
respect the maximum port numbers of controllers and use all of them.
Ports for virtio consoles are quietly reserved, but not formatted
(neither in XML nor on QEMU command line).
Also rejects duplicate virtio-serial addresses.
https://bugzilla.redhat.com/show_bug.cgi?id=890606https://bugzilla.redhat.com/show_bug.cgi?id=1076708
Test changes:
* virtio-auto.args
Filling out the port when just the controller is specified.
switched from using
maxport + 1
to:
first free port on the controller
* virtio-autoassign.args
Filling out the address when no <address> is specified.
Started using all the controllers instead of 0, also discards
the bus value.
* xml -> xml output of virtio-auto
The port assignment is no longer done as a part of XML parsing,
so the unspecified values stay 0.
Create a sorted array of virtio-serial controllers.
Each of the elements contains the controller index
and a bitmap of available ports.
Buses are not tracked, because they aren't supported by QEMU.
virDomainHasDiskMirror() currently detects only jobs that add the mirror
elements. Since some operations like migration are interlocked by
existing block jobs on the given domain the check needs to be
instrumented to check regular jobs too.
This patch renames virDomainHasDiskMirror to virDomainHasDiskBlockjob
and adds an argument that allows to select that it returns true only for
block copy jobs as those interlock making the domain persistent.
Other two uses trigger on any block job type.
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
libvirt has always used the netlink RTM_DELLINK message to delete
macvtap/macvlan devices, but it can actually be used to delete other
types of network devices, such as bonds and bridges. This patch makes
virNetDevMacVLanDelete() available as a generic function so it can
intelligibly be called to delete these other types of interfaces.
Recently we've fixed a bug where the status XML could not be parsed as
the parser used absolute path XPath queries. This test enhancement tests
all XML files used in the qemu-xml-2-xml test as a part of a status XML
snippet to see whether they are parsed correctly. The status XML-2-XML is
currently tested in 223 cases with this patch.
The current auto-indentation buffer code applies indentation only on
complete strings. To allow adding a string containing newlines and
having it properly indented this patch adds virBufferAddStr.
Every thread created as a worker thread within a pool gets a name
according to virThreadPoolJobFunc name.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Automatically assign a job to every thread created by virThreadCreate.
The name of the virThreadFunc function passed to virThreadCreate is used
as the job or worker name in case no name is explicitly passed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Each thread can use a thread local variable to keep the name of a job
which is currently running in the job.
The virThreadJobSetWorker API is supposed to be called once by any
thread which is used as a worker, i.e., it is waiting in a pool, woken
up to do a job, and returned back to the pool.
The virThreadJobSet/virThreadJobClear APIs are to be called at the
beginning/end of each job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Add a few helpers that allow to operate with memory device definitions
on the domain config and use them to implement memory device coldplug in
the qemu driver.
This patch adds code that parses and formats configuration for memory
devices.
A simple configuration would be:
<memory model='dimm'>
<target>
<size unit='KiB'>524287</size>
<node>0</node>
</target>
</memory>
A complete configuration of a memory device:
<memory model='dimm'>
<source>
<pagesize unit='KiB'>4096</pagesize>
<nodemask>1-3</nodemask>
</source>
<target>
<size unit='KiB'>524287</size>
<node>1</node>
</target>
</memory>
This patch preemptively forbids use of the <memory> device in individual
drivers so the users are warned right away that the device is not
supported.
Add a XML element that will allow to specify maximum supportable memory
and the count of memory slots to use with memory hotplug.
To avoid possible confusion and misuse of the new element this patch
also explicitly forbids the use of the maxMemory setting in individual
drivers's post parse callbacks. This limitation will be lifted when the
support is implemented.
This function does not make any sense now, that network driver is
(almost) dropped. I mean, previously, when threads were
serialized, this function was there to check, if no other network
with the same name or UUID exists. However, nowadays that threads
can run more in parallel, this function is useless, in fact it
gives misleading return values. Consider the following scenario.
Two threads, both trying to define networks with same name but
different UUID (e.g. because it was generated during XML parsing
phase, whatever). Lets assume that both threads are about to call
networkValidate() which immediately calls
virNetworkObjIsDuplicate().
T1: calls virNetworkObjIsDuplicate() and since no network with
given name or UUID exist, success is returned.
T2: calls virNetworkObjIsDuplicate() and since no network with
given name or UUID exist, success is returned.
T1: calls virNetworkAssignDef() and successfully places its
network into the virNetworkObjList.
T2: calls virNetworkAssignDef() and since network with the same
name exists, the network definition is replaced.
Okay, this is mainly because virNetworkAssignDef() does not check
whether name and UUID matches. Well, lets make it so! And drop
useless function too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Adds the port type definitions and methods that will be used to bind
interfaces to the Midonet virtual ports.
virtnetdevmidonet.c adds the way to bind and unbind the ports by
calling into the Midonet Host Agent control command line (installed
with the midolman package).
Signed-off-by: Antoni Segura Puimedon <toni+libvirt@midokura.com>
As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.
To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.
The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.
Note that the comments for the functions are future aware and document
state that will be present after a few later patches.
virDomainNetFindIdx no longer returns info whether device was not found,
or there was multiple matches. Additionally it already handle error
reporting. Introduce virDomainHasNet which does a simple task, without
implicit error reporting.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
A helper that never returns an error and treats bits out of bitmap range
as false.
Use it everywhere we use ignore_value on virBitmapGetBit, or loop over
the bitmap size.
https://bugzilla.redhat.com/show_bug.cgi?id=1135491
More or less a virtual copy of the existing virDomainVcpuPin{Add|Del} API's.
NB: The IOThreads implementation "reused" the virDomainVcpuPinDefPtr
since it provided everything necessary - an "id" and a "map" for each
thread id configured.
This is going to be needed later, when some functions already
have the virNetworkObjList object already locked and need to
lookup a object to work on. As an example of such function is
virNetworkAssignDef(). The other use case might be in
virNetworkObjListForEach() callback.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
