There are two ways for specifying loader:nvram pairs:
1) --with-loader-nvram configure option
2) nvram variable in qemu.conf
Since we have FW descriptors, using this old style is
discouraged, but not as strong as one would expect. Produce more
warnings:
1) produce a warning if somebody tries the configure option
2) produce a warning if somebody sets nvram variable and at
least on FW descriptor was found
The reason for producing warning in case 1) is that package
maintainers, who set the configure option in the first place
should start moving towards FW descriptors and abandon the
configure option. After all, the warning is printed into config
output only in this case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1763477
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The qemuDomainGetStatsIOThread() accesses the monitor by calling
qemuDomainGetIOThreadsMon(). And it's also marked as "need
monitor" in qemuDomainGetStatsWorkers[]. However, it's not
checking if acquiring job was successful.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The qemuDomainObjEnterMonitor() should not be called without a
job set. Catch this error and produce a warning message if such
call occurred.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Commit 01ca4010d86 (libvirt v5.1.0) moved address reservation for
hotplugged interface devices up to an earlier point in
qemuDomainAttachNetDevice(), because that function calls
qemuDomainSupportsNicdev() (in the case of
VIR_DOMAIN_NET_TYPE_VHOSTUSER), and qemuDomainSupportsNicdev() needs
to know the address type (for ARM machinetypes) and returns incorrect
results when the address type is "none".
This bugfix unfortunately caused a regression, because it also made PCI
address reservation happen before we noticed that the device was a
*hostdev* interface. Those interfaces are hotplugged by just calling
out to qemuDomainAttachHostdevDevice() - that function would then also
attempt to reserve the *same PCI address* that had just been reserved
in qemuDomainAttachNetDevice().
The solution is to move the bit of code that short-circuits out to
virDomainHostdevAttach() up *even earlier* so that no PCI address has
been allocated by the time it's called.
https://bugzilla.redhat.com/show_bug.cgi?id=1744523
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This introduces semantic validation for SVE-related features,
preventing the user from combining them in invalid ways; it also
automatically enables overall SVE support if any SVE vector
length has been enabled by the user to make sure QEMU behaves
correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The ARM implementation of query-cpu-model-expansion only
supports full expansion, so we have to make sure we're using
that expansion mode if we want to obtain any useful data.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
CPU features are available on ARM only wherever the
query-cpu-model-expansion QMP command is available, same as
on s390. Update qemuBuildCpuModelArgStr() to reflect this
fact.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Mirrors the existing QEMU_CAPS_X86_MAX_CPU.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We're going to use it on non-x86 soon, so it needs a more
generic name: virQEMUCapsObjectPropsMaxCPU.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 075523438 added a direct reference to @cookie even though
it may be NULL as shown by a comment a few lines previous - so add
the check here as well.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we don't have to deal with errors of virBuffer we can also make
this function void.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function now does not return an error so we can drop it fully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use only one switch case selecting job type and decide what's successful
outcome on a case-by-case basis.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce qemuMonitorTransactionBitmapMergeSourceAddBitmap which adds
the appropriate entry into a virJSONValue array to be used with
qemuMonitorTransactionBitmapMerge. Bitmap merging supports two possible
formats and this new helper implements the more universal one specifying
also the source node name.
In addition use the new helper in the testQemuMonitorJSONTransaction
test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract the linking and saving bits of checkpoint creation into
qemuCheckpointCreateFinalize so that qemuCheckpointCreateXML is a bit
simpler and also makes it reusable in the backup code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate out individual steps of creating a checkpoint from
qemuCheckpointCreateXML into separate functions. This makes the function
more readable and understandable and also some of the new functions will
be reusable when we will be creating a checkpoint along with a backup
in the upcoming patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prevent insane configurations by enforcing that disk bitmap for a
checkpoint must match the name of the checkpoint.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In few places we have the following code pattern:
int ret;
... /* @ret is not accessed here */
ret = f(...);
return ret;
This pattern can be written less verbose:
...
return f(...);
This patch was generated with following coccinelle spatch:
@@
type T;
constant C;
expression f;
identifier ret;
@@
-T ret = C;
... when != ret
-ret = f;
-return ret;
+return f;
Afterwards I needed to fix a few places, e.g. comment in
virDomainNetIPParseXML() was removed too because coccinelle
thinks it refers to @ret while in fact it doesn't. Also in few
places it replaced @ret declaration with a few spaces instead of
removing the line. But nothing terribly wrong.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
These two functions have pattern that's preventing us from
simpler virAsprintf() -> g_strdup_printf() transition. Modify
their logic a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All OSes that we support have libselinux >= 2.5 except for Ubuntu 16.04
where the version is 2.4.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far, the virDomainDeviceFindSCSIController() takes
virDomainDeviceInfo structure which is an overkill. It assumes
that the passed structure is type of
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_DRIVE which is not obvious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Calling the monitor was convenient for the implementation in
qemuDomainBlockCopyCommon, but causes the snapshot code to call
query-named-block-nodes for every disk.
Fix this by removing the monitor call from
qemuBlockStorageSourceCreateDetectSize so that the data can be reused in
loops.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Retrieve data for individual block nodes in a hash table. Currently only
capacity and allocation data is extracted but this will be extended in
the future.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
In many cases we used virDomainDiskByName to solely look up disk by
target. We have a new helper now so we can replace it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In both replaced cases we have other code that verifies that the bus
can't be changed or that the target is unique, so limiting the search to
disks with same bus makes no sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In some cases we want to prepare a @src which is not meant to belong to
a disk and thus does not require us to copy the data. Allow passing in
NULL @disk into qemuDomainPrepareDiskSourceData.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Note in the comment that this function prepares the storage source based
on the configuration of the disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The function does not do anything that could fail. Remove the return
value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
qemuDomainPrepareDiskSourceData historically prepared everything but
we've split out the majority of the functionality so that it sets up
predominately only according to the configuration of the disk. There
was one leftover bit of setting the gluster debug level from the config.
Split this out into a separate function so that
qemuDomainPrepareDiskSourceData only prepares based on the disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
ACKed-by: Eric Blake <eblake@redhat.com>
The @freeTmpPath boolean is used to determine if @tmpPath holds
an allocated memory or is a pointer to a constant string and
therefore if it needs to be freed or not when returning from the
function. Well, we can unify the way we set @tmpPath so that it
always holds an allocated memory and thus always must be freed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There are three cases where vir*DeviceGetPath() returns a const
string. In these cases, the string is initialized in
corresponding vir*DeviceNew() calls which fail if string couldn't
be allocated. There's no point in checking the second time if the
string is NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Since its introduction in v1.0.5-rc1-19-g6e13860cb4 the
qemuTeardownHostdevCgroup() does nothing unless the passed
hostdev is a PCI device with VFIO backend. This seems
unnecessary.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There are two types of host devices that require /dev/vfio/vfio
access:
1) PCI devices with VFIO backend
2) Mediated devices
Introduce a simple helper that returns true if passed @hostdev
falls in either of the categories.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In some places we need to check if a hostdev has VFIO backend.
Because of how complicated virDomainHostdevDef structure is, the
check consists of three lines. Move them to a function and
replace all checks with the function call.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace:
if (!s && VIR_STRDUP(s, str) < 0)
goto;
with:
if (!s)
s = g_strdup(str);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All the callers of these functions only check for a negative
return value.
However, virNetDevOpenvswitchGetVhostuserIfname is documented
as returning 1 for openvswitch interfaces so preserve that.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the occurrences of
ignore_value(VIR_STRDUP_QUIET(a, b));
with
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the occurrences of
ignore_value(VIR_STRDUP(a, b));
with
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The CPU driver only supports CPU models for PPC64 architecture, not
plain PPC.
Failed to probe capabilities for /usr/bin/qemu-system-ppc:
this function is not supported by the connection driver:
'ppc' architecture is not supported by CPU driver
This fixes a bug in
commit db873ab3bc5f6fbd7d227727a62ccfee3d1c3e9d
Author: Jiri Denemark <jdenemar@redhat.com>
Date: Thu May 17 17:08:42 2018 +0200
qemu: Adapt to changed ppc64 CPU model names
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The use of $(AUG_GENTEST) as a dependency in the makefiles is
a problem because this was assumed to be the filename of the
script, but is in fact a full shell command line.
Split it into two variables, so it can be correctly used for
dependencies.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This commit let QEMU command line define 'xres' and 'yres' properties
if XML contains both properties from video model: based on resolution
fields 'x' and 'y'. There is a conditional structure inside
qemuDomainDeviceDefValidateVideo() that validates if video model
supports this feature. This commit includes the necessary changes to
cover resolution for 'video-qxl-resolution' test cases too.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
When searching qemuCaps->domCapsCache for existing domCaps data,
we check for a matching pair of arch+virttype+machine+emulator. However
for the hash table key we only use the machine string. So if the
cache already contains:
x86_64 + kvm + pc + /usr/bin/qemu-kvm
But a new VM is defined with
x86_64 + qemu + pc + /usr/bin/qemu-kvm
We correctly fail to find matching cached domCaps, but then attempt
to use a colliding key with virHashAddEntry
Fix this by building a hash key from the 4 values, not just machine
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This patch changes all virAsprintf calls to use the GLib API
g_strdup_printf in qemu_driver.c
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
