To allow each VM instance to record additional capabilities
without affecting other VMs, there needs to be a way to do
a deep copy of the qemuCapsPtr object
Add struct fields and APIs to allow the qemu capabilities object
to store version, arch, machines & cpu names, etc
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The current qemu capabilities are stored in a virBitmapPtr
object, whose type is exposed to callers. We want to store
more data besides just the flags, so we need to move to a
struct type. This object will also need to be reference
counted, since we'll be maintaining a cache of data per
binary. This change introduces a 'qemuCapsPtr' virObject
class. Most of the change is just renaming types and
variables in all the callers
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Technically speaking we should wait until we receive the QMP
greeting message before attempting to send any QMP monitor
commands. Mostly we've got away with this, but there is a race
in some QEMU which cause it to SEGV if you sent it data too
soon after startup. Waiting for the QMP greeting avoids the
race
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a qemu flag for USB redirection filter support.
The output:
usb-redir.chardev=chr
usb-redir.debug=uint8
usb-redir.filter=string
usb-redir.port=string
I got an off-list report about a bad diagnostic:
Target network card mac 52:54:00:49:07:ccdoes not match source 52:54:00:49:07:b8
True to form, I've added a syntax check rule to prevent it
from recurring, and found several other offenders.
* cfg.mk (sc_require_whitespace_in_translation): New rule.
* src/conf/domain_conf.c (virDomainNetDefCheckABIStability): Add
space.
* src/esx/esx_util.c (esxUtil_ParseUri): Likewise.
* src/qemu/qemu_command.c (qemuCollectPCIAddress): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetMetadata)
(qemuDomainGetMetadata): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeNetBridge): Likewise.
* src/rpc/virnettlscontext.c
(virNetTLSContextCheckCertDNWhitelist): Likewise.
* src/vmware/vmware_driver.c (vmwareDomainResume): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc, vboxAttachDrives):
Avoid false negatives.
* tools/virsh-domain.c (info_save_image_dumpxml): Reword.
Based on a report by Luwen Su.
Currently qemuMonitorOpen() requires an address of the QEMU
monitor. When doing QMP based capabilities detection it is
easier if a pre-opened FD can be provided, since then the
monitor can be run on the STDIO console. Add a new API
qemuMonitorOpenFD() for such usage
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add some non-null annotations to qemuMonitorOpen and also
check that the error callback is set, since it is mandatory
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The quota and period tunables for cpu scheduler accept only a certain
range of values. When changing the live configuration invalid values get
rejected. This check is not performed when changing persistent config.
This patch adds a separate range check, that improves error messages
when changing live config and adds the check for persistent config.
This check is done only when using the API. It is still possible to
specify invalid values in the XML.
This patch tries to clean the code up a little bit and shorten very long
lines.
The apparent semantic change from moving the condition before calling
the setter function is a non-issue here as the setter function is a
no-op when called with both arguments zero.
This is another fix for the emulator-pin series. When going through
the cputune pinning settings, the current code is trying to pin all
the CPUs, even when not all of them are specified. This causes error
in the subsequent function which, of course, cannot find the cpu to
pin. Since it's enough to pass the correct VCPU ID to the function,
the fix is trivial.
Only VNC_{{DIS,}CONNECTED,INITIALIZED} and SPICE_INITIALIZED events are
documented to support server/auth field and even there it is marked as
optional. Emit "" auth scheme in case QEMU didn't send it.
After discussion with DB we decided to rename the new iolimit
element as it creates the impression it would be there to
limit (i.e. throttle) I/O instead of specifying immutable
characteristics of a block device.
This is also backed by the fact that the term I/O Limits has
vanished from newer storage admin documentation.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
When reboot using qemu guest agent was requested, qemu driver kept
waiting for SHUTDOWN event from qemu. However, such event is never
emitted during guest reboot and qemu driver would keep waiting forever.
This patch adds support for running qemu guests with the required
parameters to forcefully enable or disable BIOS advertising of S3 and
S4 states. The support for this is added to capabilities and there is
also a qemu command parameter parsing implemented.
Implementation of iolimits for the qemu driver with
capability probing for block size attribute and
command line generation for block sizes.
Including testcase for qemuxml2argvtest.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
After fixing the last review comments on remote port searching (commit
a14b4aea51), the commit right after that
wasn't modified accordingly, therefore two values weren't changed as
they should and the configurable ports don't work as expected.
This simple commit changes last two values missed and fixes the issue.
When domain XML contains any of the elements for setting up CPU
scheduling parameters (period, quota, emulator_period, or
emulator_quota) we need cpu cgroup to enforce the configuration.
However, the existing code would just ignore silently such settings if
either cgroups were not available at all cpu cgroup was not available.
Moreover, APIs for manipulating CPU scheduler parameters were already
failing if cpu cgroup was not available. This patch makes cpu cgroup
mandatory for all domains that use CPU scheduling elements in their XML.
The variable max_id is initialized again in the step of
getting cpu mapping variable map2. But in the next for loop
we still expect original value of max_id, the bug will
crash libvirtd when using on NUMA machine with big number
of cpus.
virDomainVcpuPinAdd does a realloc on vcpupin_list if the new vcpu pin
definition doesn't fit into the array. The list is an array of pointers
but the function definition didn't support returning the changed pointer
to the caller if it was realloced. This caused segfaults if realloc
would change the base pointer.
Commit d0c0e79ac6 left behind some dead
code (hasDAC can't be efectively set to true, because
virSecurityManagerNew fails to load the "dac" driver).
This patch also enhances the condition for adding the default
auto-detected security manager if the manager array is allocated but
empty.
Also the configuration file for qemu driver still contains reference to
the DAC driver that can't be enabled manualy.
Before commit 05447e3af4, qemuAgentCommand
blocked until it got a reply or appropriate event. When new parameter
was added to qemuAgentCommand in the above commit, all existing callers
of it were updated in a wrong way changing them from blocking to
5-seconds timeout.
This bug was revealed by the crash described in
https://bugzilla.redhat.com/show_bug.cgi?id=852383
The vlan info pointer sent to virNetDevOpenvswitchAddPort should never
be non-NULL unless there is at least one tag. The factthat such a vlan
info pointer was receveid pointed out that a caller was passing the
wrong pointer. Instead of sending &net->vlan, the result of
virDomainNetGetActualVlan(net) should be sent - that function will
look for vlan info in net->data.network.actual->vlan, and in cany case
return NULL instead of a pointer if the vlan info it finds has no
tags.
Aside from causing the crash, sending a hardcoded &net->vlan has the
effect of ignoring vlan info from a <network> or <portgroup> config.
If no 'security_driver' config option was set, then the code
just loaded the 'dac' security driver. This is a regression
on previous behaviour, where we would probe for a possible
security driver. ie default to SELinux if available.
This changes things so that it 'security_driver' is not set,
we once again do probing. For simplicity we also always
create the stack driver, even if there is only one driver
active.
The desired semantics are:
- security_driver not set
-> probe for selinux/apparmour/nop
-> auto-add DAC driver
- security_driver set to a string
-> add that one driver
-> auto-add DAC driver
- security_driver set to a list
-> add all drivers in list
-> auto-add DAC driver
It is not allowed, or possible to specify 'dac' in the
security_driver config param, since that is always
enabled.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The security driver loading code in qemu has a flaw that causes it to
register the DAC security driver twice. This causes problems (machines
unable to start) as the two DAC drivers clash together.
This patch refactors the code to allow loading the DAC driver even if
its specified in configuration (it can't be registered as a common
security driver), and does not add the driver twice.
If cgroups are enabled in general but cpu cgroup is disabled in
qemu.conf or not mounted at all, libvirt would refuse to start any
domain even though scheduler parameters are not set in domain XML.
This patch makes cpu cgroup mandatory only for domains that actually
want to use it.
With current flow in qemudDomainDefine we might lose data
when updating an existing domain. We parse given XML and
overwrite the configuration. Then we try to save the new
config. However, this step may fail and we don't perform any
roll back. In fact, we remove the domain from the list of
domains held up by qemu driver. This is okay as long as the
domain was brand new one.
Currently, when guest agent is configured but not responsive
(e.g. due to appropriate service not running in the guest)
we return VIR_ERR_INTERNAL_ERROR. Both are wrong. Therefore
we need to introduce new error code to reflect this case.
With the latest patches libvirt supports qemu agent monitor
passthrough. However, function in qemu driver is called
qemuDrvDomainAgentCommand. s/Drv// as used in all other names.
In my quest for reusing variables I failed to edit one variable when
fixing details between two patch versions. That results in a failure
to start qemu with autoport and spice tls, because qemu is trying to
bind two sockets to the same port.
Commit 4b03d59167 changed the pinning
behavior in a way that makes some machines non-startable.
The comment mentioning that we cannot control each vcpu when there is
not VCPU<-> PID mapping available is true, however, this isn't
necessarily an error, because this can be caused by old QEMU without
support for "query-cpus" command as well as a software emulated
machines that don't create more than one process.
The name 'virDomainDiskSnapshot' didn't fit in with our normal
conventions of using a prefix hinting that it is related to a
virDomainSnapshotPtr. Also, a future patch will reuse the
enum for declaring where the VM memory is stored.
* src/conf/snapshot_conf.h (virDomainDiskSnapshot): Rename...
(virDomainSnapshotLocation): ...to this.
(_virDomainSnapshotDiskDef): Update clients.
* src/conf/domain_conf.h (_virDomainDiskDef): Likewise.
* src/libvirt_private.syms (domain_conf.h): Likewise.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainDiskDefFormat): Likewise.
* src/conf/snapshot_conf.c: (virDomainSnapshotDiskDefParseXML)
(virDomainSnapshotAlignDisks, virDomainSnapshotDefFormat):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskPrepare)
(qemuDomainSnapshotCreateSingleDiskActive)
(qemuDomainSnapshotCreateDiskActive, qemuDomainSnapshotCreateXML):
Likewise.
This has several benefits:
1. Future snapshot-related code has a definite place to go (and I
_will_ be adding some)
2. Snapshot errors now use the VIR_FROM_DOMAIN_SNAPSHOT error
classification, which has been underutilized (previously only in
libvirt.c)
* src/conf/domain_conf.h, domain_conf.c: Split...
* src/conf/snapshot_conf.h, snapshot_conf.c: ...into new files.
* src/Makefile.am (DOMAIN_CONF_SOURCES): Build new files.
* po/POTFILES.in: Mark new file for translation.
* src/vbox/vbox_tmpl.c: Update caller.
* src/esx/esx_driver.c: Likewise.
* src/qemu/qemu_command.c: Likewise.
* src/qemu/qemu_domain.h: Likewise.
We were failing to react to allocation failure when initializing
a snapshot object list. Changing things to store a pointer
instead of a complete object adds one more possible point of
allocation failure, but at the same time, will make it easier to
react to failure now, as well as making it easier for a future
patch to split all virDomainSnapshotPtr handling into a separate
file, as I continue to add even more snapshot code.
Luckily, there was only one client outside of domain_conf.c that
was actually peeking inside the object, and a new wrapper function
was easy.
* src/conf/domain_conf.h (_virDomainObj): Use a pointer.
(virDomainSnapshotObjListInit): Rename.
(virDomainSnapshotObjListFree, virDomainSnapshotForEach): New
declarations.
(_virDomainSnapshotObjList): Move definitions...
* src/conf/domain_conf.c: ...here.
(virDomainSnapshotObjListInit, virDomainSnapshotObjListDeinit):
Rename...
(virDomainSnapshotObjListNew, virDomainSnapshotObjListFree): ...to
these.
(virDomainSnapshotForEach): New function.
(virDomainObjDispose, virDomainListPopulate): Adjust callers.
* src/qemu/qemu_domain.c (qemuDomainSnapshotDiscard)
(qemuDomainSnapshotDiscardAllMetadata): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsAllowed): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotLoad)
(qemuDomainUndefineFlags, qemuDomainSnapshotCreateXML)
(qemuDomainSnapshotListNames, qemuDomainSnapshotNum)
(qemuDomainListAllSnapshots)
(qemuDomainSnapshotListChildrenNames)
(qemuDomainSnapshotNumChildren)
(qemuDomainSnapshotListAllChildren)
(qemuDomainSnapshotLookupByName, qemuDomainSnapshotGetParent)
(qemuDomainSnapshotGetXMLDesc, qemuDomainSnapshotIsCurrent)
(qemuDomainSnapshotHasMetadata, qemuDomainRevertToSnapshot)
(qemuDomainSnapshotDelete): Likewise.
* src/libvirt_private.syms (domain_conf.h): Export new function.
The recent virDomainQemuAgentCommand addition is part of 0.10.0;
also, grouping all libvirt-qemu.so callbacks together makes them
easier to identify.
* src/libvirt_qemu.syms: Fix release symbol.
* src/qemu/qemu_driver.c (qemuDriver): Likewise.
* src/remote/remote_driver.c (remote_driver): Likewise.
* src/driver.h (_virDriver): Group qemu-specific callbacks.
If a domain is pmsuspended then virsh suspend will succeed. Beside
obvious flaw, virsh resume will report success and change domain
state to running which is another mistake. Therefore we must forbid
any attempts for suspend and resume when pmsuspended.
Add @seconds variable to qemuAgentSend().
When @timemout is true, @seconds controls how long to wait for a
response (if @seconds is VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT,
default to QEMU_AGENT_WAIT_TIME).
In addition, @seconds must be >= 0 or VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT.
If @timeout is false, @seconds is ignored.
Signed-off-by: MATSUDA Daiki <matsudadik@intellilink.co.jp>
