Commit Graph

938 Commits

Author SHA1 Message Date
Jens Petersen
2fb71217f9 spec: change gettext requires to gettext-runtime for F37
See https://fedoraproject.org/wiki/Changes/GettextRuntimeSubpackage

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2022-10-12 10:08:25 -04:00
Michal Privoznik
14573868ea meson: Bump minimal required meson version
Bump the minimal required version to 0.56.0. Looking into our CI
this is the oldest version we install.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-10-10 15:06:09 +02:00
Daniel P. Berrangé
83c6d80abc tools: add virt-qemu-qmp-proxy for proxying QMP via libvirt QEMU guests
Libvirt provides QMP passthrough APIs for the QEMU driver and these are
exposed in virsh. It is not especially pleasant, however, using the raw
QMP JSON syntax. QEMU has a tool 'qmp-shell' which can speak QMP and
exposes a human friendly interactive shell. It is not possible to use
this with libvirt managed guest, however, since only one client can
attach to the QMP socket at any point in time. While it would be
possible to configure a second QMP socket for a VM, it may not be
an known requirement at the time the guest is provisioned.

The virt-qmp-proxy tool aims to solve this problem. It opens a UNIX
socket and listens for incoming client connections, speaking QMP on
the connected socket. It will forward any QMP commands received onto
the running libvirt QEMU guest, and forward any replies back to the
QMP client. It will also forward back events.

  $ virsh start demo
  $ virt-qmp-proxy demo demo.qmp &
  $ qmp-shell demo.qmp
  Welcome to the QMP low-level shell!
  Connected to QEMU 6.2.0

  (QEMU) query-kvm
  {
      "return": {
          "enabled": true,
          "present": true
      }
  }

Note this tool of course has the same risks as the raw libvirt
QMP passthrough. It is safe to run query commands to fetch information
but commands which change the QEMU state risk disrupting libvirt's
management of QEMU, potentially resulting in data loss/corruption in
the worst case. Any use of this tool will cause the guest to be marked
as tainted as an warning that it could be in an unexpected state.

Since this tool introduces a python dependency it is not desirable
to include it in any of the existing RPMs in libvirt. This tool is
also QEMU specific, so isn't appropriate to bundle with the generic
tools. Thus a new RPM is introduced 'libvirt-clients-qemu', to
contain additional QEMU specific tools, with extra external deps.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2022-10-07 14:32:36 +01:00
Pavel Hrdina
69045df5c4 spec: add systemd-rpm-macros build dependency
We should explicitly depend on this package as we use some macros
defined by files that are installed from systemd-rpm-macros.

Currently the build works only because some of our other build
dependencies pull in systemd which will install systemd-rpm-macros if
rpm-build is installed as well.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-10-03 12:05:06 +02:00
Jiri Denemark
9dfa7132f2 spec: Use consistent versioning for Obsoletes
rpmbuild is complaining it's not recommended to have unversioned
Obsoletes. On the other hand using dynamic version/release is a bit too
much as we know in which release a particular subpackage was removed.
Let's just use the corresponding version in both cases to be consistent
with all other Obsoletes in our spec file.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2022-09-27 11:27:06 +02:00
Michal Privoznik
7c35778126 meson: Require libssh-0.8.1 or newer
According to repology.org:

              RHEL-8: 0.9.4
              RHEL-9: 0.9.6
           Debian 11: 0.9.5
  openSUSE Leap 15.3: 0.8.7
        Ubuntu 20.04: 0.9.3

And the rest of distros has something newer anyways. Requiring
0.8.1 or newer allows us to drop the terrible hack where we
rename functions at meson level using #define. Note, 0.8.0 is
the version of libssh where the rename happened. It also allows
us to stick with SHA-256 hash algorithm for public keys.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-09-20 09:34:52 +02:00
Peter Krempa
d4f7850d5b Remove support for building the sheepdog storage driver backend
The sheepdog project is unmaintained, with last commit in 2018 and
numerous unanswered issues reported.

Remove the libvirt storage driver support for it to follow the removal
of the client support in qemu.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-09-01 13:11:09 +02:00
Peter Krempa
c8ee79346a spec: Drop libvirt-daemon-driver-storage-sheepdog package
Upstream will be dropping the sheepdog storage backend, so we need to
stop building the package and obsolete it.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-09-01 13:11:09 +02:00
Daniel P. Berrangé
684fa309ae rpm: merge mingw sub-packages into native spec
One specfile containing both native and mingw builds is the
new best practice for Fedora. This reduces the maint burden
and ensures the mingw packages don't fall behind.

Note this adds many more BuildRequires for anyone building
on Fedora, which will now need installing.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2022-08-09 09:10:00 -04:00
Jim Fehlig
ebf84b2b36 spec: Remove duplicate check of libvirtd status
The %posttrans scriptlet checks if libvirtd is active within a
condition that is only executed if libvirtd is active. Remove the
duplicate check.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-08-01 11:26:35 -06:00
Cole Robinson
aabace2aa5 spec: Fix indentation
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2022-06-13 09:09:35 -04:00
Cole Robinson
b7eca90cd4 spec: Xen arches have changed on Fedora 36+
Latest fedora 36+ xen builds have dropped i686 and armv7hl builds.

Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2022-06-13 08:11:31 -04:00
Andrea Bolognani
ab10207c3b spec: Move virkey* manual pages from -daemon to -client
The documentation included in these manual pages is mostly useful
to users of the 'send-key' virsh command, and the virsh manual
page refers to them, so it makes more sense to install them along
with virsh instead of libvirtd.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2022-03-17 14:45:51 +01:00
Andrea Bolognani
f2da2f173d rpm: List one more directory
Commit 4b43da0bff missed it.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-02-02 16:26:29 +01:00
Andrea Bolognani
4b43da0bff rpm: List more directories
This has two advantages: it makes it possible for the admin to
ask rpm what package they belong to, and results in them ending
up with stricter permissions than they would have if we let
libvirt create them at runtime.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-02-02 10:59:50 +01:00
Andrea Bolognani
3a22ba2e84 rpm: Move /var/lib/libvirt from -libs to -daemon
The server, not the client, uses local storage.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-02-02 10:59:48 +01:00
Andrea Bolognani
4098c68ec8 rpm: Move /etc/libvirt from -daemon to -libs
Files like libvirt.conf influence the behavior of the library
itself. The daemon depends on the library, so the directory is
guaranteed to be present both on the client side and on the
server side.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-02-02 10:59:33 +01:00
Andrea Bolognani
0f97f9860c spec: Don't clean up *.la and *.a files
autotools used to produce those, but meson doesn't.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2022-01-26 11:57:32 +01:00
Peter Krempa
aaec8c91ae spec: Run pre/post-install stuff on 'daemon-driver-storage-core'
'daemon-driver-storage' is just a meta-package, the actual daemon is in
the 'daemon-driver-storage-core' package, so without installing the meta
package the storage daemon is not being enabled.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2025644
Fixes: 50eae3f885, b8ef625544
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2022-01-19 17:00:27 +01:00
Andrea Bolognani
cef015e325 spec: Drop BuildRequires on dnsmasq
It's been an optional build time dependency for a long time, so
if Meson couldn't find it the only consequence was that libvirt
would look for it at runtime instead, which is what we are doing
for most of our non-library dependencies anyway.

Since 5c98d1cee0 we've stopped even looking for it at build
time, so there's no point in having it installed in the build
environment.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-01-18 16:50:15 +01:00
Olaf Hering
8eb4461645 remove sysconfig files
sysconfig files are owned by the admin of the host. They have the
liberty to put anything they want into these files. This makes it
difficult to provide different built-in defaults.

Remove the sysconfig file and place the current desired default into
the service file.

Local customizations can now go either into /etc/sysconfig/name
or /etc/systemd/system/name.service.d/my-knobs.conf

Attempt to handle upgrades in libvirt.spec.
Dirty files which are marked as %config will be renamed to file.rpmsave.
To restore them automatically, move stale .rpmsave files away, and
catch any new rpmsave files in %posttrans.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2022-01-17 18:20:59 +01:00
Jim Fehlig
161727417a docs: Add man page for libvirt-guests
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2022-01-17 18:20:55 +01:00
Andrea Bolognani
55a248d354 virt-ssh-helper: Move manual page to section 8
While sections are somewhat loosely defined and thus the choice
is not quite a clear-cut one, section 8 might be a slightly
better fit in this case.

Suggested-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-01-13 16:07:56 +01:00
Andrea Bolognani
82d514084a virt-ssh-helper: Add manual page
We don't usually provide manual pages for internal tools,
but in the case of virt-ssh-helper the command is installed
inside the default $PATH and so it's likely that the user
will stumble upon it by using the shell's completion feature
when invoking another virt-* command, which makes it a good
idea to provide at least a minimal manual page.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-01-07 17:02:17 +01:00
Andrea Bolognani
f58533b367 spec: Drop BuildRequires on xfsprogs-devel
We no longer need its contents.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2022-01-04 15:46:11 +01:00
Andrea Bolognani
868df2a768 spec: Drop BuildRequires on ZFS
We're no longer performing build time detection.

Fixes: 506c3a39d6
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2022-01-03 11:39:19 +01:00
Andrea Bolognani
cac854e4d4 spec: Demote netcat to Recommends
It is only needed if compatibility with clients that have
libvirt < 6.9.0 is required, and can be uninstalled otherwise.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2022-01-03 09:37:50 +01:00
Olaf Hering
4ed8f5b67d spec: relocate pre script of daemon-driver-qemu
Reduce the delta in an upcoming change.
No change in behavior intended.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
2021-12-23 16:51:37 +01:00
Olaf Hering
42cbffd715 spec: fix %preun of virtnetworkd
Fixes: 50eae3f885
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
2021-12-23 16:51:27 +01:00
Daniel P. Berrangé
883f643d70 rpm: don't start/stop -ro.socket units for virtlockd/virtlogd
These daemons do not have any support for unprivileged readonly
access, so we must not reference -ro.socket units in scripts.

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-12-16 10:02:56 +00:00
Daniel P. Berrangé
25a6e49668 rpm: fix typo in daemon name in %post/%preun scripts
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-12-16 10:02:46 +00:00
Ján Tomko
5e0c3e0a33 spec: do not require radvd
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
2021-12-15 15:28:17 +01:00
Ján Tomko
4a6b246d39 Revert "virt-ssh-helper: Add manual page"
This was pushed by mistake with incorrect claim of my R-b.

This reverts commit dadcd35260.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2021-12-10 23:08:31 +01:00
Andrea Bolognani
9402db25f8 virt-pki-query-dn: Add manual page
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-12-10 18:40:10 +01:00
Andrea Bolognani
dadcd35260 virt-ssh-helper: Add manual page
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-12-10 18:39:31 +01:00
Jiri Denemark
d804408ef9 qemu: Enable unprivileged userfaultfd for post-copy migration
Userfaultfd is by default allowed only for privileged processes. Since
libvirt runs QEMU unprivileged, we need to enable unprivileged access to
userfaultfd to enable post-copy migration.

https://bugzilla.redhat.com/show_bug.cgi?id=1945420

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2021-12-10 17:53:11 +01:00
Andrea Bolognani
c5dc658ea8 spec: Explicitly provide locations for QEMU data
These are the defaults, but we prefer to be explicit.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-11-18 15:49:02 +01:00
Andrea Bolognani
47c439ce44 spec: Don't create unnecessary directory
The directory is already created by the build system, so we
don't need to create it explicitly in the spec file; moreover,
the path was incorrect, because it used datadir instead of
localstatedir.

Fixes: 4e041189f8
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-11-18 15:47:57 +01:00
Martin Kletzander
9715043544 tools: Add virt-pki-query-dn binary
With this program we do not have to depend on the output of `certtool -i`, which
changed the order of the fields at some point and the newest version is
incompatible with what libvirt expects in tls_allowed_dn_list configuration
option.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2021-11-12 12:37:29 +01:00
Peng Liang
4c0cf7c4dc spec: change the ownership of cache directory
In a50c473ad6 ("qemu: move temp file of screenshot and memorypeek to
per-domain dir") and c4f3c955d5 ("qemu: don't change ownership of
cache directory"), I move the temporary files of screenshot and
memorypeek from the cache directory to per-domain directory, and the
only user of the cache directory is the domain capabilities currently.
Since the domain capabilities are used by libvirtd, no need to set the
ownership of the cache directory to qemu_user and qemu_group.

Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-10-12 16:54:49 +02:00
Erik Skultety
40f5c8679a libvirt.spec.in: Replace %global with %define
Commit b5e8db8f14 tuned the SPEC file so that libvirt daemons restart
on package upgrade. In order to do that it added a bunch of
parametrized macros using the %global directive. This caused a problem
when running RPM builds on CentOS Stream 8 resulting in:

error: Too many levels of recursion in macro expansion. It is likely
       caused by recursive macro declaration.
error: Macro %libvirt_daemon_perform_restart failed to expand
error: line 1275: %global libvirt_daemon_perform_restart() \
       if test %libvirt_daemon_needs_restart %1 \
       then \
           /bin/systemctl try-restart %1.service >/dev/null 2>&1 || : \
       fi \
       %libvirt_daemon_finish_restart %1

There are 2 important differences between %global and %define
directives:
1) %define is local-only and does have scope - in reality though, its
   scope is apparently not really enforced because it behaves exactly
   the same way as %global
2) %define is evaluated at the time of use while %global is evaluated
   at the time of definition

The latter and the fact the macro is parametrized is the reason why the
RPM builds fails on CentOS. Strangely enough this only happens on
CentOS Stream, but not Fedora (which is also the main proponent of
replacing %define with %global). Anyhow, replacing %global with %define
makes the rpmbuild to pass on both and along with package upgrades.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-24 11:01:07 +02:00
Daniel P. Berrangé
3315bc3ba8 rpm: fix typo in post transaction scriptlet name
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-08-31 13:40:55 +01:00
Michal Privoznik
c71a986e9a rpm: Enable numactl on s390x
While s390x doesn't have NUMA nodes it has libnuma which is still
helpful as it parses sysfs for us and kernel emulates NUMA#0.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2021-08-23 14:00:24 +02:00
Daniel P. Berrangé
821414f0cd rpm: add conditionals around post scripts
The hypervisor drivers can be disabled in certain build scenarios, so
their corresponding post scripts need to match.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-08-06 12:00:53 +01:00
Daniel P. Berrangé
5998497d5f rpm: use direct remote connection for Fedora >= 35 / RHEL >= 9
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-08-04 16:06:11 +01:00
Daniel P. Berrangé
50eae3f885 rpm: handle enabling/disabling modular daemons post/postun-install
We need to enable or disable the modular daemons with systemd after the
RPM install/uninstall.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-08-04 15:59:15 +01:00
Daniel P. Berrangé
a97c2b14b2 rpm: macroize logic for enabling/disabling daemons post/postun-install
The patterns for enabling/disabling daemons post/postun-install has a
bit of duplication across the different part of the spec, due to the
number of socket units involved. This is going to get much worse with
the need to enable/disalbe modular daemons, so benefits from macroization.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-08-04 15:59:11 +01:00
Daniel P. Berrangé
b8ef625544 rpm: restart modular daemons on upgrade
The daemons all need restarting to ensure they pick up the newly
installed code.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-08-04 15:58:28 +01:00
Daniel P. Berrangé
c2eafaf7a3 rpm: restart virtnwfilter/virnetworkd if configs change
Currently we restart libvirtd if the nwfilter/network configs have
changed. We need to take account of possibility that the modular
daemons are in use instead though.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-08-04 15:57:45 +01:00
Daniel P. Berrangé
b5e8db8f14 rpm: macroize logic for restarting daemons post-transaction
The patterns for restarting daemons post-transaction has a bit of
duplication across the different part of the spec. This is going to
get much worse with the need to restart modular daemons, so benefits
from macroization.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-08-04 15:56:35 +01:00