To prevent unexpected situations where a change in code would stop
looking at some of the tested commands go unnoticed add a mechanism to
force consumption of all test items.
Since there are a few tests which would be hard to fix add also a
mechanism to opt-out of the check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For each test monitor entry store an optional string which will allow to
identify it. This will be used later when checking that all registered
monitor commands were used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Until now we've tried to report errors from the test monitor code by
passing them back as failures from the qemu we simulate. This doesn't
work well in cases when the monitor logic does not detect failures or
has fallback code. Additionally there isn't much use for continuing the
test execution after first failure as in most cases the test data will
be misaligned and all other calls will fail as well.
To make the errors more obvious this patch moves away from reporting
them via the simulated monitor to reporting them to stderr and
exit()ing afterwards. While this might be less convenient
when developing tests it actually makes failures in the test suite
really obvious and doesn't require any opt-in from the tests themselves.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
One of the test cases attempted to use test data meant for modern qemu
without asserting the 'modern' flag. Since that changes the commands
used to query state it won't work with data meant for the modern case.
Remove the invalid test case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test verifies unplug of a disk with the persistent reservations
helper. The 'object-del' used to remove the helper was not mentioned in
the list of expected commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's a method of the test monitor and it adds a response to the monitor
output. The original qemuMonitorTestAddErrorResponse method is renamed
to qemuMonitorTestAddErrorResponseInternal
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our implementation wasn't quite able to parse everything that qemu does.
This patch rewrites the parser to a code that semantically resembles the
combination of 'nbd_parse_filename' and 'inet_parse' methods in qemu to
be able to parse the strings in an equivalent manner.
The only thing that libvirt doesn't do is to check the lengths of
various components in the nbd string in places where qemu uses constant
size buffers.
The test cases validate that some of the corner cases involving colons
are parsed properly.
https://bugzilla.redhat.com/show_bug.cgi?id=1826652
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add io_uring value to capability replies.
The capability QEMU_CAPS_AIO_IO_URING will be used for io_uring aio mode,
introduced from QEMU 5.0, linux 5.1.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The 'human-monitor-command' equates to the 'drive-del' command issued by
the hotplug code on successful detach of a device. This means that it's
not issued for failed attempts and thus should not be added to the
expected list. Unfortunately our test monitor doesn't ensure that all
expected commands were consumed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We always queue the DEVICE_DELETED events before successful return from
the command so that tests are reliable. This means we can decrease the
unplug timeout as it's guaranteed to be executed in correct order.
According to my testing it shaves off ~450ms of test run:
real 0m0.721s
vs.
real 0m0.259s
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'@vm' is used to use a different timeout for ppc64 guests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Bump to v5.0.0-rc3-8-g3119154db0 and make sure that 'liburing' is picked
up by qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In 97a0aa2467 the @actual variable was renamed to @confactual.
However, the commit missed non-Linux case resulting in a broken
build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
New tests are required to cover some new XML syntax entry for
<lease/> option. This includes schema testing and other features
like unit attribute and lease value. This commit includes hostsfile
checks adding new files for each test case that is manipulating <host/>
tag.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If an user is trying to configure a dhcp neetwork settings, it is not
possible to change the leasetime of a range or a host entry. This is
available using dnsmasq extra options, but they are associated with
dhcp-range or dhcp-hosts fields. This patch implements a leasetime for
range and hosts tags. They can be defined under that settings:
<dhcp>
<range ...>
<lease/>
</range>
<host ...>
<lease/>
</host>
</dhcp>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=913446
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a new test to check the 'mode' attribute of the passthrough element
and augment an existing, related test to check enablement of the
passthrough element only.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the appropriate entries into the schema to allow encryption of the
backup or scratch image. Since we use blockdev internals for everything
no changes to the code are actually necessary.
https://bugzilla.redhat.com/show_bug.cgi?id=1811906
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want to format even the secure information in tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If a pcie-root-port or pcie-downstream-port has hotplug='off' in its
<target> subelement, and if the qemu binary supports the hotplug=false
option, then it will be added to the commandline for the pcie
controller. This controller will then not allow any hotplug/unplug of
devices while the guest is running (and the hotplug capability won't
be advertised to the guest OS, so the guest OS also won't present
unplugging of PCI devices as an option).
<controller type='pci' model='pcie-root-port'>
<target hotplug='off'/>
</controller>
For any PCI controllers other than pcie-downstream-port and
pcie-root-port, of for qemu binaries that don't support the hotplug
commandline option, an error will be logged during validation.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
a <controller type='pci'...> element can now have a "hotplug"
attribute in the <target> subelement. This is intended to control
whether or not the slot(s) of the controller support
hotplugging/unplugging a device:
<controller type='pci' model='pcie-root-port'>
<target hotplug='off'/>
</controller>
The default value of hotplug is "on".
Since support for configuring such an option is hypervisor-dependent
(and will vary among different types of PCI controllers even on a
single hypervisor), no validation is done in this patch - that
validation will be done in the patch that wires support for the
setting into the hypervisor.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This caps flag is set when the qemu binary supports the option
"hotplug" for pcie-root-port, ioh3420 (Intel pcie-root-port) and
xio3130-downstream (Intel pcie-downstream-port). If it's available,
it's possible to disable hotplugging/unplugging devices on a
particular port by adding ",hotplug=off" to the qemu device
commandline. This option first appears in qemu-5.0.0.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add support in the domXML<->native config converter for max_event_channels.
The parser and formater functions for max_grant_frames were reworked to
also parse max_event_channels. In doing so the xenbus controller is added
earlier in the config parsing, requiring a small adjustment to one of the
existing tests. Include a new test for the event channel conversion.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add support for setting event_channels in libxl domain config object and
include a test to check that it is properly converted from XML to libxl
domain config.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The signatures of these two CPU model differ only in stepping as both
report family 6 and model 85. Skylake-Server uses stepping 4 or less and
Cascadelake-Server uses stepping 5..7.
https://bugzilla.redhat.com/show_bug.cgi?id=1761678
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Skylake-Server with family 6, model 85, stepping 4, which is currently
mis-detected as Cascadelake-Server CPU model.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass the packed option on the QEMU command line of the capability for
packed virtqueues is detected and the parameter is set explicitly.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add the capability for QEMU's packed virtqueues for virtio that supposedly have
better cache utilization and performance compared to the default split queues.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Update s390x capabilities for QEMU 4.2 with the actual GA version for
QEMU and on the latest z15 machine.
This picks up the new blockdev capability, so we need to refresh a bunch
of test cases as well.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The virDomainGenerateMachineName() function doesn't belong in
src/conf/ really, because it has nothing to do with domain XML
parsing. It landed there because of lack of better place in the
past. But now that we have src/hypervisor/ the function should
live there. At the same time, the function name is changed to
match new location.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Initially introduced in v3.10.0-rc1~172.
When generating a path for memory-backend-file or -mem-path, qemu
driver will use the following pattern:
$memoryBackingDir/libvirt/qemu/$id-$shortName
where $memoryBackingDir defaults to /var/lib/libvirt/qemu/ram but
can be overridden in qemu.conf. Anyway, the "/libvirt/qemu/" part
looks redundant, because it's already contained in the default,
or creates unnecessary nesting if overridden in qemu.conf.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The virQEMUDriverConfigNew() accepts path to root directory for
embed mode as an argument. If the argument is not NULL it uses
the passed value as prefix for some internal paths (e.g.
cfg->libDir). If it is NULL though, it looks if the other
argument, @privileged is true or false and generates internal
paths accordingly. But when calling the function from the test
suite, instead of passing NULL for @root, an empty string is
passed. Fortunately, this doesn't create a problem because in
both problematic cases the generated paths are "fixed" to point
somewhere into build dir or the code which is tested doesn't
access them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This option prevents misbehaviours on guest if a qemu 9pfs export
contains multiple devices, due to the potential file ID collisions
this otherwise may cause.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce new 'multidevs' option for filesystem.
<filesystem type='mount' accessmode='mapped' multidevs='remap'>
<source dir='/path'/>
<target dir='mount_tag'>
</filesystem>
This option prevents misbehaviours on guest if a qemu 9pfs export
contains multiple devices, due to the potential file ID collisions
this otherwise may cause.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QEMU 9pfs 'multidevs' option exists since QEMU 4.2. Probe QEMU's
command line set though to check whether this option is really
available, and if yes enable this new QEMU_CAPS_FSDEV_MULTIDEVS
capability on libvirt side.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function will remain public due to its usage in qemublocktest.c
even after moving qemuDomainDeviceDefValidate(). The position of its
header in qemu_validate.h is no accident.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that v5.0.0-rc1 was tagged, update the capabilities to make sure
that everything works as expected.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU now formalized the arguments of netdev-add in the schema, so we
must use a real type to pass the schema validation once the schema is
updated.
The 'user' variant doesn't have any other mandatory fields.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Trying to squeeze the validator output into the monitor reply message
doesn't make sense and doesn't work well as it's not well formed JSON:
54) qemuMonitorJSONAddNetdev ... libvirt: error : internal error: cannot parse json { "error": { "desc": "failed to validate arguments of 'netdev_add' against QAPI schema: {
ERROR: variant 'test' for discriminator 'type' not found
", "class": "UnexpectedCommand" } }: lexical error: invalid character inside string.
ev_add' against QAPI schema: { ERROR: variant 'test' for
(right here) ------^
FAILED
Output it to stderr if requested and just note that schema validation
failed in the error message:
54) qemuMonitorJSONAddNetdev ...
failed to validate arguments of 'netdev_add' against QAPI schema
args:
{
"id": "net0",
"type": "test"
}
validator output:
{
ERROR: variant 'test' for discriminator 'type' not found
libvirt: QEMU Driver error : internal error: unable to execute QEMU command 'netdev_add': failed to validate arguments of 'netdev_add' against QAPI schema (to see debug output use VIR_TEST_DEBUG=2)
FAILED
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test name is concatenated from a prefix with the test name, but no
space was added so the output looked wrong.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When moving the formatting of this attributes from -drive
to -device, the QEMU_CAPS_USB_STORAGE_WERROR capability
was used, because usb-storage was the last device to gain
this capability.
However this lead to the assumption that QEMU binaries
without the usb-storage device do not support this,
leading to breakage on s390x with blockdev.
Fixes: bb4f3543bbhttps://bugzilla.redhat.com/show_bug.cgi?id=1819250
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Detect the werror property on SCSI and virtio disks.
But clear it if the QEMU supports usb-storage device without it
also supporting this option for usb-storage.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
To demonstrate the move of these attributes from -drive to -device.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For http/https URIs we need to preserve the query part as it may be
important to refer to the image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the storage source has the query part set, format it in the output.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a new attribute for holding the query part for http(s) disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
